JVC CU-VD50AA User's Manual
Contents
1. shows electrical power standby and shows ON Safety Precautions for the Burner Be sure to observe the following precautions Failing to do so may result in electric shock fire injury or malfunction Do not disassemble dismantle or modify the equipment Requests for repair and inspection should be made to the dealer Do not insert metal or combustible objects or pour water or other liquids inside the burner Turn off the power when connecting equipment Remove the plug when the burner will not be used for a prolonged time or prior to cleaning electricity flows hrough the equipment even when the power is off Do not block the ventilation holes of the burner Do not use where there is condensation Suddenly carrying the burner from a cold location to a hot location may result in the formation of drops which may cause a malfunction or failure Do not cause the burner to vibrate when discs are in Safety Precautions for Accessories When using the AC adapter the power cord and the USB cable be sure to observe the following precautions Failing to do so may result in electric shock fire injury or malfunction Do not insert or remove the plug when your hands are wet Fully insert the plug into the outlet Keep dust and metal objects away from the plug Do not damage the cord e Place the cord where it will not trip someone up Do not use when thunder can b2. The burner cannot function properly due to a drop in its interior temperature Wait until the power lamp stops blinking There is a rise in the burner s interior temperature Turn off the burner wait for a while then turn on again Make sure the USB cable is connected properly Insert the connector with the protrusion to the burner and the other end to the Everio camera P 14 Make sure the USB cable provided with the Everio camera is connected properly P 16 Use discs recommended for the burner P 48 Insert the disc with the label facing up Wipe off any dirt that is found on the tray Use discs for which the writing surface is not damaged Do not use deformed discs If disc writing is currently in progress the disc tray cannot be opened Wait till the writing process ends if the disc cannot be properly ejected after the burner is dropped or due to other malfunctions insert a thin rod into the force eject hole to eject the disc P 44 Use the recommended discs P 48 y eq eld The remote control is not working Unable to operate No images on the TV Images are distorted during fast forward fast reverse playback The images cannot be displayed in the normal aspect ratio Reading fails Playback cannot function properly Digest Playback starts when the PREVIOUS NEXT button is pressed repeatedly I
3. The remote control is not operable when the disc tray is opened Close the disc tray If the burner does not work at all remove the power plug and insert again It may not function properly due to lightning strike or static electricity Connect this burner to a TV P 12 13 Switch to the external output that connects the burner to the TV with a video audio input connectors After pressing the power button it will take about 25 seconds to display the intermediate screen P 34 If there are too many recorded files or when a disc that is not recommended is used it will take several minutes to display the playback navigator Check the resolution setting again P 33 Images may be distorted for sections where the playback speed changes This is not a malfunction When both the HDMI terminal and Audio Video output connectors are connected set HDMI VIDEO MODE in the settings menu to OFF to output the images with priority given to the Audio Video output connectors P 36 Insert the disc with the label facing up Wipe off any dirt that is found on the tray Make sure that the writing surface of the disc is not damaged Do not use deformed discs Playback of commercial DVD Video is not guaranteed AVCHD disc created on a high definition Everio is equipped with the Digest Playback function If the PREVIOUS NEXT button is pre
4. 886 2 8667 1298 356 5 8667 1300 ext 333 Japan Japanese 10 00 am to 5 00 pm 81 3 3516 9555 E Paid voice support z Lines are open Location Language Mon to Fri URL 1 00 pm to 10 00 pm http www cyberlink com english cs USA English CST support new_site voice_support jsp E Support web e mail Language URL e mail address English http www cyberlink com english cs support new_site support_index html German French Spanish Italian Japanese http jp cyberlink com support goCyberlink aixtema de Folder Configuration This shows the folder configuration when files are copied from a high definition Everio camera or a PC to a DVD When Copying from High Definition Everio to Data Disc Back up folders Video files Ss pp J EVERIO_V BACKUP 08060101 2 MOV001 TOD EVERIO VIDEO NORMAL BACK UP 08060502 MOV002 TOD ROOT Everio CREATE FROM ALL DATE 08060101 DATE BACK UP Everio CREATE BY DATE EVENT EVENT BACK UP Everio CREATE BY EVENT FILES FILE BACK UP i Everio SELECT FROM SCENES PLAYLIST PLAYLIST BACK UP Everio CREATE BY PLAYLIST 08060101 08060101 08060101 Back up folders Still image files Ss 7 EVERIO_S PAU o ie 08060101 PIC_0001 JPG EVERIO IMAGE PIC_0002 JPG DATE DATE BACK UP FILES 08060101 FILE BACK UP 08060101 1 Video and still i
5. Number Playback Time Title Number Disc Type Playback Position EN Audio Format E During playback of video data disc copied from a high definition Everio Playback Time File Date Time Disc Type 01 06 2008 10 20 00 00 25 DVD R O Playback Position eee Audio Format ma Playback Mode E During playback of still image data disc copied from a high definition Everio File Date Time Disc Type E During playback of DVD disc copied from Everio Chapter Number Playback Time Disc Type Title Number Playback Position Ss Audio Format ZEN ma Playback Mode Troubleshooting Jesouey dog Cannot turn the power on Cannot function properly The burner or AC adapter is hot The power lamp blinks slowly in red while using the burner The burner is not recognised by the Everio camera The burner is not recognised by the PC Writing fails Cannot open the disc tray Unable to write read data at the maximum speed when connected to a PC Make sure the AC adapter and power cord are properly connected P 2 Press the power button on this burner for more than 5 seconds to reset the burner The burner will turn off automatically The burner and AC adapter will become hot with prolonged use This is not a malfunction If the burner is abnormally hot remove the AC adapter and consult the dealer from which the burner is purchased
6. Turn on the TV and set the HDMI CEC related setting in its menu to on For details refer to the instruction manual of the TV e Turn on this burner and set CONTROL WITH HDMI under CONNECTION oy SES a SETTING in the settings menu to ON P 34 37 HDMI cable not provided Operation method 1 e Insert a disc e The TV automatically Press the PLAY or switches to the HDMI input NAVIGATION TOP Turn on the TV MENU button if the beforehand playback navigator does not appear Operation method 2 e This burner turns off n e Turn off the TV automatically e Some TV will turn on automatically and switch to the HDMI input just by turning on this burner e Depending on the TV connected the onscreen display language of this burner will automatically switched to the language that was being selected for the TV when the burner is turned on This is applicable only if this burner supports the language selected for the TV To use this burner using a language that differs from the onscreen display language of the TV set CONTROL WITH HDMI to OFF e Malfunction may occur when devices such as amplifier and selector are connected Set CONTROL WITH HDMI to OFF e HDMI CEC Consumer Electronics Control is an industry standard that I enables interoperability between HDMI CEC compliant devices that are connected via HDMI cables e Not all HDMI compati
7. a 4 7 GB disc This may vary according to conditions such as the number of titles High definition AVCHD disc Everio Approx 60 minutes including time for finalisation e When recording videos for about 60 minutes in the XP mode to a 8 5 GB DVD R DL disc This may vary according to conditions such as the number of files Data disc Approx 45 minutes including time for finalisation e When recording videos for about 40 minutes in the FHD mode to a 8 5 GB DVD R DL disc This may vary according to conditions such as the number of files e GZ MC100 GZ MC200 GZ MC500 GZ MG20 GZ MG40 GZ MG50 and GZ MG70 cannot be used When connected to a PC Interface USB 2 0 USB 1 1 1 Interface cable USB cable USB cable provided with Everio can also be used Supported operating Windows XP Home Edition Windows XP Professional system Windows Vista Home Basic Windows Vista Home Premium Macintosh is not supported Data buffer capacity 2MB Data transfer rate Writing for USB 2 0 DVD R Maximum 8x DVD RW Maximum 6x DVD R DL Maximum 6x Reading DVD R Maximum 8x DVD RW Maximum 8x DVD R DL Maximum 8x CD R Maximum 24x 2 CD RW Maximum 24x 2 CD ROM Maximum 24x Compatible discs Writing DVD R DVD RW DVD R DL ie Soe cannot Reading DVD R DVD RW DVD R DL CD ROM CD R CD RW Supported software PowerProducer 4 NE provided with Everio
8. menu cannot be played back correctly deselect SVRT and execute again Extensions recognised by this burner are as follows Extensions that have been changed cannot be played back properly e Data recorded on Everio via PC MTS TOD MOD JPG e Data edited on PC JTS TPD JPG e When playing back a file created on a PC pressing the PLAY button after searching may cause the playback position to deviate Video output 1 0 V 75 Q Pin jack Audio output 2 0 Vrms Pin jack Component video output Y p p 1 0 V 75 Q Pin jack Cs Cr PB PR p p 0 7 V 75 Q Pin jack HDMI output terminal 19 pin HDCP x v Color Deep Color compliant Video 1080p 1080i 720p 576p 576i We do not provide guarantee for compatibility with DVI D Audio 2CH PCM bit stream For NTSC system the video output format is 480p or 480i e Discs other than those above cannot be played back properly When connected to an Everio camera Interface USB 2 0 Interface cable USB cable Mini A type Mini B type Compatible discs for Everio DVD R DVD RW muno High definition 8 cm discs cannot Everio DVD R DVD R DL DVD RW be used Recording format Everio DVD Video video only High definition AVCHD disc video Everio Data disc video still image Recording time Everio Approx 30 minutes including time for finalisation When recording videos for about 90 minutes in the Fine mode to
9. picture quality XP SP EP is changed during recording The image will freeze for a few seconds when switching between files with different picture quality For files recorded in the same picture quality playback is seamless e When the recorded file is less than 3 seconds The image will freeze for a few seconds at the end of a file that is less than 3 seconds e When more than 99 files with the same date are recorded The image will freeze for a few seconds when switching between files at every 99 file recordings For continuous 99 files playback is seamless Disc cannot be ejected When a disc cannot be ejected with the eject button use the following procedure to eject by force Turn off this burner Insert a thin rod into the force eject hole located next to the eject button and the tray will be ejected Pull out the tray manually and remove the disc Force eject hole Error Messages Unplayable disc Incompatible disc Unfinalized disc Use finalized disc Disc error Region code error Cannot execute the operation Cannot play back No video files stored No image files stored gt v VF VF FF GF w The disc may be dirty Clean the disc and try again The disc or data format is not supported Check the disc or data format extension P 49 Insert a disc that can be played on this burner P 49 The Close disc check box in Power2Go might have been un
10. red due to a drop in the burner s interior temperature some functions will not work and there will be no image displayed on the TV screen Wait until the power lamp stops blinking in red before operating this burner This burner enables DVDs of videos recorded with the JVC Hard Disk Camera to be created without using a PC If you want to edit videos recorded with the camera and create your original DVDs use the software provided with the camera for editing and creating DVDs A provided data writing software Power2Go 5 5 Lite can be used for writing data However it cannot be used to edit videos or create DVDs The burner does not include support for Macintosh This unit applies to the standard IEC60825 1 2001 for laser products The socket outlet shall be installed near the equipment and shall be easily accessible Dear Customer Thank you for purchasing this burner Before use please read the safety information and precautions contained in pages 6 and 7 to ensure safe use of this product ATTENTION This unit contains microcomputers External electronic noise or interference could cause malfunctioning In such cases switch the unit off and unplug the mains power cord Then plug it in again and turn the unit on Take out the disc After checking the disc operate the unit as usual Safety Precautions IMPORTANT In the event that any of the following occur r
11. tray cannot be opened closed when the burner is off Press the eject Pull out button completely place O Close the tray e Push in until the tray snaps in QO Open the LCD monitor e The Everio camera turns on e The power lamp on the burner changes from orange to green light An hourglass is displayed when the burner is recognising the disc When completed the following screen appears VIDEO SS CREATEFROMALL f SELECT AND CREATE F PLAYBACK FINALIZE SELECT S e Do not touch the e Do not place any e Do not topple recording side objects on top e Do not subject to mechanical shock Recording or playback may not function properly if the disc is scratched or dirty Copying Videos to a DVD Operate on the Everio camera Depending on the model connected the on screen display may differ from those shown below Select move up down Confirm push in select CREATE FROM ALL i VIDEO CREATE FROM ALL SELECT AND CREATE EB PLAYBACK FINALIZE SELECT SET select ALL SCENES CREATE FROM ALL Z ALLSCENES Ey UNSAVED SCENES SELECT SET MENU TOP Select OK ALL SCENES QUANTITY REQUIRED DVD 1 DVD DL 1 PREPARE AN EMPTY DISC OK RETURN gt SELECT SET MENU TOP Select Yes ALL SCENES DO YOU WANT TO MAKE AN AUTOMATIC HEADLINE ON THE DISC TOP MENU gt SELECT SET ME
12. CyberLink Power2Go 5 5 Lite provided with CU VD50 1 If you are using a USB 1 1 cable it will take approximately 3 hours to write one DVD 2 Any CD recorded using the packet write method is not supported 5 Printed in Malaysia 2008 Victor Company of Japan Limited O608MNH SW VM
13. G DER KLASSE 3B IM GERATEINNEREN VORHANDEN NICHT DEM LASERSTRAHL AUSSETZEN PRECAUCI N CUANDO SE ABRE HAY RADIACI N LASER DE CLASE 3B VISIBLE E INVISIBLE EVITE LA EXPOSICI N A LOS RAYOS LASER ER CORRECE CLASS 3B OVRL FHRUATAL Y HOBET K LeRER LD MNROLBUTE CAUTION To avoid electric shock or damage to the unit first firmly insert the small end of the power cord into the AC Adapter until it is no longer N SE wobbly and then plug the larger end of the power cord into an AC outlet The mains plug shall remain readily operable Remove the mains plug immediately if the burner functions abnormally If malfunctioning occurs stop using the unit immediately and consult your local JVC dealer Caution on Replaceable lithium battery The battery used in this device may present a fire or chemical burn hazard if mistreated Do not recharge disassemble heat above 100 C or incinerate Replace battery with Panasonic Matsushita Electric Sanyo Sony or Maxell CR2025 Danger of explosion or Risk of fire if the battery is incorrectly replaced e Dispose of used battery promptly Keep away from children Do not disassemble and do not dispose of in fire WARNING Batteries shall not be exposed to excessive heat such as direct sunshine fire or the like The I button does not completely shut off mains power from the unit but switches operating current on and off
14. Inc registered in the United States and other countries e Pentium is a registered trademark of Intel Corporation in the United States e Manufactured under licence from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories e HDMI the HDMI logo and high definition multimedia interface are trademarks or registered trademarks of HDMI Licensing LCC e The x v Color and x v Color logos are trademarks e The AVCHD and AVCHD logos are trademarks of Matsushita Electric Industrial Co Ltd and Sony Corporation e Other company and product names mentioned herein are registered trademarks and or trademarks of their respective holders Specifications Rated current 2 3A Dimensions 152 x 42 x 195 mm W x Hx D Mass Approx 920 g excluding AC adapter and connection cables Operating Operating temperature 0 C to 35 C environment Storage temperature 20 C to 60 C Laser power For DVD 656 to 663 nm 1 04 mW wavelength output For CD 777 to 788 nm 1 33 mW AC adapter AP V50U Power supply AC110 V to 240 V 50 Hz 60 Hz Input capacity 0 6A Output DC 5 3 V 3 5 A Operating 3 3 temperature 0 C to 40 C Dimensions 52 x 31 x 120 mm W x H x D excluding power cord Mass Approx 136 g Remote control RM V55U Type DC 3 V CR2025 button battery Battery life Approx 1 year depending on the frequency of use Operating distance Approx 5
15. JVC N00 CU VD50AA AG DVD Burner INSTRUCTIONS 22 diss DIGITAL Basic Guide Getting Ready to Copy to a DVD 1 Get ready a recommended disc Use DVD R DVD RW or DVD R DL disc of the brands listed below DVD R DVD RW and DVD RAM discs cannot be used 7 7 DVD R DL Single WEHR DYDERY sided double layer JVC TDK JVC JVC Verbatim Brand Verbatim SONY z DVD R DL single sided double layer discs can be used only when the Caution nae burner is connected to a high definition Everio camera e Use a commercially available cleaning cloth to wipe the disc gently if there are any fingerprints or dirt Applying too much strength will result in scratches e Do not use discs that are scratched 2 Connect To power supply outlet t Protrusion To power supply outlet To DC jack Ete p at Ue toe t l J Use the AC adapter to power on the Everio camera Insert the connector with the protrusion to the burner Power button SS CU VD50 A gt ip WF j Everio Power lamp s Press the power button to turn on the burner The power lamp changes from blinking orange to steady orange e When an AVCHD disc P 15 is inserted into a device that is not AVCHD compatible you may not be able to eject the disc To eject the disc refer to the instruction manual of your device O Open the tray and insert the disc e The
16. NSCREI C 6 y Nea Fy e Press the button each time to change the output resolution E Connection using HDMI cable HDMI VIDEO MODE ON Resolutions not supported by the TV are not displayed id AUTO 576p 720p 10801 1080p 7 E Connection using component video cable HDMI VIDEO MODE OFF HDMI cable not connected Z 576i gt 576p 720p gt 1080i a E Connection using video cable Setting is not necessary 576i is output regardless of the setting e If this burner is connected to a TV that does not support the preset output resolution using a HDMI cable the setting switches automatically to AUTO e When this burner is connected using a component video cable with the output resolution set to 1080i or 720p the output resolution will be set to 576i or 576p if a DVD Video disc is inserted e When the HDMI cable is connected the resolution of the component connectors is fixed at 576i HDMI VIDEO MODE ON e When the resolution is set to 576p for the HDMI cable connection the 4 3 PAN amp SCAN or 4 3 LETTERBOX display format under MONITOR TYPE in the settings menu will be selected if the image size is 4 3 P 35 e For NTSC system 576i and 576p are displayed as 480i and 480p respectively s Settings Menu Change the settings of this bu
17. NU TOP select EXECUTE ALL SCENES Or M 100 DVD 1 1 EXECUTE CANCEL gt SELECT gt SET MENU TOP QO Press OK ALL SCENES COMPLETED OK Copy completed e Do not turn off the power or remove the USB cable while the the hourglass or the copy in progress screen is displayed You can also choose to copy your favourite scenes For details refer to the instruction manual of the Everio camera Playing Videos Stored on the DVD 1 Connect this burner to the TV Connect to the TV with TV To power an Audio Video cable idi supply outlet g pn White 4 l wa Yellow aS D gt e For details refer to Connecting to the TV P 12 13 2 Remove the USB cable The power lamp on the burner changes as follows Green gt Blinking orange gt Orange e When the USB cable is removed the playback navigator appears automatically About 40 seconds Playback navigator screen on the TV e An unfinalised disc cannot be played back p properly Refer to the ot oo instruction manual of the E 07 06 2008 11 45 01 06 2008 17 09 Everio camera and finalise the disc Ea 01 08 2008 15 15 Use the selection keys on the remote control to select the video to play back and press the ENTER button Playback begins When the power lamp blinks slowly in
18. Pressing the button each time changes the playback speed between 1 16x 1 4x and 1 2x REV REV Rewinds playback Changes in the order of Search 1 to Search 3 with each press Press the button when in the paused mode to enable reverse playback frame by frame Press and hold the button to slow down the reverse playback speed Pressing the button each time changes the reverse playback speed between 1 16x and 1 4x NEXT NEXT Displays the next video PREVIOUS PREVIOUS Displays the previous video Skip Advances the playback position by about 30 seconds Replay Moves the playback position backward by about 7 seconds TOOL TOOL Displays the playback menu P 29 Changing the Playback Settings You can alter the method for playing back video still images as well as the image settings Operate during playback f ve RESOLUTION PS Ni a A SET UP TOOL ON SCREEN phau T indicates the default settings during purchase of this product DISC SETTING If the disc contains more than one audio language subtitle language or has multi angle scenes you can select with this setting AUDIO LANGUAGE Set the audio language to be played back SUBTITLE Set the subtitle language to be displayed CHANGE ANGLE Switch the angle camera to be played back PLAYBACK SETTING REPEAT For configuring settings on video playback and repe
19. TO IMAGE MODE Switches from video to still image SWITCH TO VIDEO MODE Switches from still image to video e SHOW DETAIL Displays the file name folder name recorded date and playback duration for video or image size for still image The playback duration display for video will not be available if the file has not been played back before e When the disc contains both videos and still images the videos will be displayed first To view still images select SWITCH TO IMAGE MODE from the TOOL MENU E Buttons that can be used during playback AVCHD data disc Description Remol E onirolButton Video Image Playback Still Image Playback Pressing this button when in PLAY the paused or variable speed i PLAY playback mode resumes Starts the slide show normal playback PAUSE Pauses playback Pauses the slide show PAUSE STOP Stops playback Stops the slide show STOP Fast forwards playback Changes in the order of Search 1 to Search 3 with each press Press the button when in the paused mode to enable forward playback frame by frame Press and hold the button to slow down the playback speed Pressing the button each time changes the playback speed between 1 16x 1 4x and 1 2x i FWD eS Remote Control Button Description Video Image Playback Still Image Playback Rewinds playback Changes in the order of Search 1 to Search 3 with each pre
20. VCHD disc data disc or DVD Video Note e Depending on the model connected still images cannot be copied For details refer to the instruction manual of the Everio camera e Do not turn off this burner while data is being written to the disc The disc cannot be ejected during data writing Wait until writing finishes e The remote control is not operable when this burner is connected to the Everio Copying from PC to DVD This burner can be used as a DVD burner when connected to a PC And you can use the provided software to copy to a DVD Connecting to a PC e This burner Off USB cable provided with Everio PC USB connector DOG To power supply outlet t DC connector USB connector AC adapter Copying to a DVD Turn on this burner and the PC e Install the CyberLink Power2Go 5 5 Lite software if you have not done so P 18 2 Insert a new disc e Refer to page 3 on how to insert the disc e Refer to page 2 for the recommended discs Use Power2Go to copy to a DVD Use Power2Go to create a folder e Use half width alphanumeric characters when entering the folder names or file names You can enter up to 40 characters Under the Burner tab in the Power2Go Configuration Information menu check the box next to Close disc Confirm that the file system under the data tab is set to UDF 1 5 Video playback will not function properly if the disc was
21. ach Part ccccssssseesseesseesseesseeessesenesseneeseeseeeeees 10 Front and Top Panel FREAK RANG EE ETE E TA E fubevaredke bees Remote Controliinen a a A a A A A ENA Connecting to the TV verroa eeaeee re aae ea araa aaee aeia Connecting to a TV with HDMI Input Terminal eseeseeseesieeeisrsierereinrrererrernens Connecting to a TV with Component Video Input Connectors 7 Connecting to a TV with Audio Video Input COnnectorS seseesesererreerieiereren Copying Everio Video to a DVD s ssssusussurensurenrurnununnunnnnunnununnunennunennnnennunennnnenn ennen Connecting to an Everio Camera s s Creating AVCHD Disc Data Disc DVD Video Copying from PC to DVD ssessseeereeee P Connecting to a P oo eeeeeceeneeeeceeeseeneeeeeeeeeeaeeeeeeaeeeeeaeseeeeesaeseeesaeseeesaeeeeseaeeneeeaeees Copying to amp DAYA D EEEIEE Computers That Can Be Used s Installing CyberLink Power2Go 5 5 Lite ssesesisieisiesieieisrieineiniieininsrnnsinninns CyberLink Power2Go 5 5 Lite Contact Information eeeeeeeeeeiseiereriernrrererrereens Folder Configuration ssssssusessnseneunnuunrurenrnnenrunnnnnnnnnnnn When Copying from High Definition Everio to Data Disc When Copying from High Definition Everio to AVCHD Disc 5 When Creating and Storing Desired Folders and Files on a PC cceeeeeeees 22 Playing Images Stored on the DVD ccssssceessseeeseeeeeeseesenseeeseeseeeseeseneseeseeteneees 23 Viewing I
22. allShield Wizard for Power250 The Instalida R Wieard wll irstall Power2Go on your computer To contine click Next O Confirm the contents and then click Yes The Customer Information screen appears CyberLink Cap Cybsilink By s chcose No the bi I O Enter the User Name and Company Name and then click Next 1e and he name ofthe compary for whem pou work QO Follow the on screen intructions e Installation starts After a while the InstallShield Wizard Complete screen appears click Finish e The computer will restart and installation is completed e If the screen on the right does not appear proceed to step click Finish e The CyberLink Power2Go 5 5 Readme screen appears Setup Complete Seluphas completed the Fower2Gc instalation P Site ise O Read the contents of the Readme CyberLink Power2Go 5 5 Lite Contact Information For information on CyberLink Power2Go 5 5 Lite or other products use the following contact information E Telephone fax support Office hours Location Language Mon to Fri Phone Fax English German Germany French Spanish 9 00 am to 5 00 pm 49 700 462 92375 49 241 70525 25 Italian Taiwan Mandarin 9 00 am to 6 00 pm
23. at playback of slide shows OFF Do not repeat TITLE Repeats playback of the title For video images only Repeats playback between the chapters For AVCHD CHAPTER discs and DVD Videos only Repeats playback of files within a folder For files FOLDER stored on the PC only Repeats playback of all files For data disc stored on high definition Everio only ALL The files in the current folder are played back repeatedly when you play back from the playback navigator A B Repeats playback between two predetermined points A and B For DVD Videos only CHANGE TITLE For AVCHD discs and DVD Videos only Jumps to the specified title CHANGE CHAPTER For AVCHD discs and DVD Videos only Jumps to the specified chapter SLIDESHOW INTERVAL For still images only 5 SEC 10 SEC 15 SEC For specifying the time for displaying images SLIDESHOW EFFECTS For still images only For specifying the fade effect when switching to another image OFF Disable fade effect ON Enable fade in or fade out from black colour VIDEO SETTING You can only configure settings for video images PICTURE QUALITY For specifying the video image quality NORMAL Set to this value under normal circumstances CINEMA Plays back in cinema like picture quality FINE Plays back in clear sharply defined picture quality SOFT Plays back in soft texture
24. ble devices comply with the HDMI CEC standard The HDMI control function of this burner will not work when connected to these devices e This burner is not guaranteed to operate with all HDMI CEC enabled devices e Depending on the specifications of each HDMI CEC enabled device some functions may not work with this burner For details refer to the instruction manual of your TV e Unintended operations may occur with some connected devices In these cases set CONTROL WITH HDMI to OFF e HDMI control does not function when the USB cable is connected Remove the USB cable if you want to use the HDMI control function e HDMI control does not function immediately after inserting the power cord to the AC outlet Press the power button on this burner to turn it on e If the HDMI cable connection is changed perform the following operations to allow this burner and the connected devices to recognise each other With the TV turned on turn off and on this burner again Set the CONTROL WITH HDMI under CONNECTION SETTING in the settings menu to OFF then set to ON again Viewing High Quality Images You can change the video output resolution when this burner is connected to a high definition TV using a HDMI or component video cable Operate when in the intermediate screen Intermediate screen To display the intermediate screen refer to page 34 cn vo RESOLUTION SETUP TOOL O
25. checked to allow further recording Under the Burner tab in the Power2Go Configuration Information menu check the box to close the disc P 16 Disc is not finalised when it is copied from the high definition Everio Make sure to finalise the disc after copying For details refer to the instruction manual of the Everio camera The disc may be dirty Clean the disc and try again Discs with a region code that differs from the region code set for this burner cannot be played back Insert a disc with a region code that matches the region code of this burner P 46 Operate after stopping playback File data may be missing The disc or data format is not supported Check the disc or data format extension P 49 You have selected a folder that does not contain any videos Select a folder with video files P 25 You have selected a folder that does not contain any still images Select a folder with still image files P 25 Other Information IMPORTANT e Be sure to unplug the burner before beginning cleaning e Do not use liquid or aerosol cleaners e Ensure that no moisture or liquid comes into contact with the drive during cleaning Exterior of the Burner Wipe dirt off with a dry cloth Disc Tray Wipe off dirt with a soft dry cloth Do not touch the lens To clean the lens use commercially available lens cleaning blower f
26. colours AUTO Set to this value under normal circumstances OFF Set to this value when the video images are distorted or when the colours are not correctly reproduced For NTSC system 576i and 576p are displayed as 480i and 480p respectively I Deep Color This function works during playback Specify this setting when viewing images on a TV that supports Deep Color This allows viewing of high definition images of 30 bit and 36 bit colour depths that are higher than the full 24 bit colour Select this value to view high definition images on a TV that AUTO supports Deep Colour Set to OFF if the images cannot be played back properly OFF Set to this value under normal circumstances HDMI ENHANCE SETTING Specify this setting when connected to a TV that comes with the DVI input terminal using an HDMI DVI conversion cable STANDARD Set to this value under normal circumstances ENHANCED Set to this value when the black and white colours of the video image are not clear CONTROL WITH HDMI For specifying whether to use the HDMI CEC function which allows the TV to operate in conjunction with this burner P 31 OFF ON Do not operate in conjunction with TV Operate in conjunction with TV OTHER SETTING RESUME For specifying whether to memorise the stop position ON Memorise the stop po
27. created with the file system set to ISO9660 Joliet Copy files such as JTS TPD and JPG into the folder p e For details on using Power2Go refer to the User s guide Help and Readme files installed with the software You can access the User s guide Help and Readme files from the Start menu on the PC e To get customer support and to register the software you need the following product key CD Key PXNVM NWE4G XQD9Q CU9DX 3FQFN NAKUS e This burner cannot be used to write files into CD R or CD RW discs Refer to page 51 for the recommended discs e This burner does not response to all the functions of Power2Go 5 5 Lite e Power2Go 5 5 Lite does not support conversion of audio files to MP3 format e When the Enter Activation Key screen appears while using Power2Go 5 5 Lite close the screen without entering the activation key Hi Removing USB cable from PC Carry out removing of hardware on the PC Remove the USB cable e To play back disc created on a PC on this burner follow the following procedure Insert the disc into this burner After disc recognition press the NAVIGATION TOP MENU button to display the playback navigator P 23 e For data disc created on a PC the date and time displayed will not be accurate Computers That Can Be Used CyberLink Power2Go 5 5 Lite can be used on computers satisfying the following conditions Windows XP Home Edition pre installed Operating Win
28. d picture quality USER SETTING Plays back images in the picture quality specified in DETAIL SETTING DIGITAL NOISE REDUCTION For specifying whether t o enable noise removal from the image OFF Disable noise removal ON Enable noise removal DETAIL SETTING For specifying the advanced settings when PICTURE QUALITY is set to USER SETTING CONTRAST For specifying the image contrast level BRIGHTNESS For specifying the image brightness level SHARPNESS For specifying the image contour COLOR For specifying the colour intensity of the image GAMMA For specifying the image gray level 3DNR For specifying the image noise reduction PROGRESSIVE OUTPUT For playing back the source material after converting to an appropriate progressive video AUTO1 Automatically detects the film material and video material and converts to the appropriate progressive video In addition to AUTO1 automatically detects the 30fps AUTO2 progressive video and converts to the appropriate progressive video VIDEO Converts the video material to the appropriate progressive video p the setting may have no effect on some images Operate in Conjunction with TV via HDMI Connecting this burner to an HDMI CEC enabled TV using the HDMI cable allows you to utilise the following convenient functions Connect an HDMI cable between this burner and the TV P 12 e
29. dows XP Professional pre installed system Windows Vista Home Basic 32 bit edition pre installed Windows Vista Home Premium 32 bit edition pre installed Connector USB 2 0 1 1 connector Intel Pentium III at least 800 MHz eeu Intel Pentium 4 at least 2 GHz recommended RAM At least 128 MB at least 256 MB recommended Free hard disk At least 50 MB for installation space At least 5 GB recommended for creating DVDs Display Must be capable of displaying 800 x 600 dots If you use USB 1 1 cable it will take approximately 3 hours to write one DVD Installing CyberLink Power2Go 5 5 Lite e Do not play the provided CD ROM in an audio player It is not an audio CD Playing this CD ROM in an audio player will result in a loud high noise It may also damage the circuit and speaker 1 Insert the provided CD ROM in the PC Windows Vista Click Run INSTALL EXE on the AutoPlay screen Click Continue on the User Account Control screen The Choose Setup Language screen appears Windows XP e After a while the Choose Setup Language screen appears 2 Confirm the language and then click OK e The following screen appears Choose Setup Language f i Select the language for this installation from the choices below Cancel click Next e The License Agreement screen appears Welcome to the Inst
30. e heard Do not dismantle Do not use for any product other than this one Do not play the provided CD ROM with an audio player Doing so may damage the circuits or speakers Safety Precautions for Discs Do not use the following discs Cracked discs Deeply scratched discs Installation Do not install in any of the following locations Humid location Location of 60 C or above Location subject to direct sunlight Location where overheating is likely Dusty or smoky locations e Locations subject to oily smoke or steam such as a kitchen counter or beside a humidifier Unstable location Bathroom Dusty places Slanted location ATTENTION On placing the unit Some TVs or other appliances generate strong magnetic fields Do not place such appliances on top of the unit as it may cause picture disturbance When moving the product Press to turn off the power and wait at least 30 seconds before unplugging the power cord Then wait at least 2 minutes before moving the product Contents Safety Precauthons a a i aia sede cess a enoia ia aaa aa n aE ea adanada pareerib AaS 6 Getting Started cess cece aaa a eat a raae a raa aan aa aa A a aae deaa Eea Aaaa enda kaatad 9 ACCOSSOMOS siiis arniodds bii adia a iS 9 Placing the BUlMGhiess ces siielcecnscncih conicesizucvacrandecsQecetepsendsauenvactasuceaseraatecniberecvensarneas OT 9 Names and Functions of E
31. emove the plug and make a request for repair to the dealer Smoke or abnormal odour is emitted Damage from being dropped Water or an object enters inside CAUTION A UNIT IS A CLASS 1 LASER PRODUCT HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED BE SURE TO OPERATE THE UNIT CORRECTLY AS INSTRUCTED WHEN THIS UNIT IS PLUGGED INTO THE WALL OUTLET DO NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF REFER SERVICING TO QUALIFIED PERSONNEL CLASS 1 LASER PRODUCT REPRODUCTION OF LABELS WARNING LABEL INSIDE OF THE UNIT CAUTION CASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO THE BEAM ATTENTION RADIATIONS LASER VISIBLES ET INVISIBLES DE CLASSE 38 QUAND OUVERT EVITEZ TOUT EXPOSITION AU FAISCEAU KLASSE 3B SYNLIG OG USYNLIG LASERSTRALING VED BNING ADVARSEL yogA UDSATTELSE FOR STR LING AVATTAESSA OLET ALTTIINA NAKYVALLE JA VARO N KYM TT M LLE LUOKAN 3B LASERSATEMYLLE ALA KATSO S TEESEEN 3 VARNING LASS 3B SYNLIG OCH OSYNLIG LASERSTRALNING NAR DENNA DEL AR PPNAD UNDVIK ATT UTS TTA DIG FOR STRALEN BE GE FFNETER ABDECKUNG IST SICHTBARE UND UNSICHTBARE VORSICHT LASERSTRAHLUN
32. m face up Operating o o temperature 0 C to 40 C Dimensions 42 x 12 x 100 mm W x Hx D Mass Approx 32 g including lithium battery Recommended discs DVD R JVC TDK Verbatim SONY DVD R DL 1 JVC 2 Verbatim DVD RW JVC e Use of this burner may not be possible or optimal performance may not be achieved depending on the disc used We suggest using the recommended discs e Use DVDs for videos e This burner supports only 12 cm discs e The appearance and specifications of this product may be modified without prior notice 1 DVD R DL discs can be used when the burner is connected to a high definition Everio and PC 2 For DVD R DL manufactured by JVC use of discs with the Also recommended for high definition Everio message stated is recommended Playback feature Discs supported DVD R DVD R DL DVD RW Data format extension AVCHD or DVD data disc created by connecting to a high definition Everio DVD video disc created by connecting to Everio DVD data disc for which data is recorded using the high definition Everio processed using an editing software of Everio and written to a specific folder on this burner e Select the file format for GZ HD series as the output format in the PowerDirector output menu e Set the file system under the data tab in the Power2Go 5 5 Lite configuration menu to UDF 1 5 e If images created by selecting SVRT in the PowerDirector output
33. mage files recorded on a high definition Everio camera that are copied to this burner will be stored in the EVERIO_V and EVERIO_S folders When Copying from High Definition Everio to AVCHD Disc Video files BDMV STREAM 00000 m2ts 00001 m2ts ROOT BACKUP CLIPINF PLAYLIST index bdmv MovieObject bdmv EVERIO_I When Creating and Storing Desired Folders and Files on a PC uL ROOT Video still image files 2 3 USER_DAT USER_DAT2 USER2 TPD 4 USER_DAT3 j USER1 JTS ian Sie ele a Slee Se t 1 I I 1 1 i I 2 Create folders with Power2Go and copy the desired video and or still image files into the folders You can use any folder names and file names according to your preference Indicated as USER_DAT in the illustration 3 Use Power2Go to copy the USER_DAT folders to the DVD P 16 4 Files with the extension TPD or JTS are high definition Everio video files edited on the PC e Refer also to Data format extension P 49 e You can create folders and files with any names according to your preference however do not use EVERIO_V or EVERIO_S as the folder name e Use half width alphanumeric characters when entering the folder names or file names You can enter up to 40 characters e You can create up to 6 levels of folders Playback is not possible if
34. mages Copied from the High Definition Everio 23 Viewing DVD Video Copied from Everio s es 27 Changing the Playback Settings 29 Operate in Conjunction with TV via HDMI 31 Viewing High Quality Images cs csssseneeseeseeseeseeeseeneesseeseeseeesensseeseeteeeseesenenes 33 Settings MeNu ccseccceceeeeeeeeeeeeeeeeeeeseeeeneeseeeeseeesneeneeesaeeseeesneeseeeeseeeseeeeeaeenees 34 Menu Operation Procedures 0 34 Settings Menu Items and Descriptions 35 Screen DisplayS sscecseesseeeees 39 Troubleshooting 41 Error Messag Soreni eonan aaiae aaraa ae daa aeaa e Sa Da eaaa aia aaa eaaa panaia 45 Other Informati sriep Sa e aa aaan a aea aiaa aaa 46 Specifications seitse e a e ae 48 Getting Started Accessories If there are any items missing please consult your authorised dealer AC adapter Power cord USB cable AP V50U Mini A Mini B type Stand Remote control D RM V55U O DVD R blank disc x 1 Instruction manual CD ROM data writing this manual other software x 1 printed material addition do not use AC adapter and power cord other than those provided Do not use the provided AC adapter and power cord for other devices In AN with this burner Doing so may result in electric shock or fire Placing the Burner E Horizontal orientation Take note of the top and bottom of the burner and place it in the horizontal o
35. more than 6 levels are created e The total path length of the file is up to 240 characters I Playing Images Stored on the DVD You can play back video and still images of Everio stored on a DVD Viewing Images Copied from the High Definition Everio H To start viewing immediately after storing images on a DVD Remove the USB cable P 14 Connect this burner to the TV e For details on connection refer to Connecting to the TV P 12 13 e Check that the power lamp of this burner lights up in orange e After pressing the power button it will take about 25 seconds to display the intermediate screen P 34 1 Insert the disc containing the copied images and the playback navigator will appear F P ig _ es q of 07 06 2008 08 51 FN 01 06 2008 1 45 J 01 06 2008 17 09 kal RS Ta i 11 08 2008 1542 fl 0108 2008 1 row u AVCHD disc Data disc video images NAVIGATION Nor TER NU m RETURN e It will take about 40 seconds to display the playback navigator e To alternate between video and still images on a disc that contains video and still images switch using the TOOL MENU P 25 e For data disc video the file being selected is played back on its thumbnail Motion thumbnail It will take several seconds to display all the eight thumbnails And a little bit more time to show the motion thumbnail e The menu displayed may differ from the menu shown above when an AVCHD di
36. ng using the remote control P 33 576i During output in D1 576i 576p During output in D2 576p 720p During output in D3 1080i 1080i During output in D4 720p HDMI SETTING HDMI VIDEO MODE Specify this setting when you are using the burner with both the HDMI terminal and component connectors connected ON Outputs with priority given to the HDMI terminal OFF Outputs with priority given to the component connectors HDMI OUTPUT For specifying the output resolution setting of the HDMI terminal You can also specify the setting using the remote control P 33 AUTO Set to this value under normal circumstances 576p During output in D2 576p 720p During output in D3 1080i 1080i During output in D4 720p 1080p During output in D5 1080p P 12 24p OUTPUT JVC camcorders do not support 1080 24p recording As of May 2008 Specify this setting when viewing video images recorded by other devices in 1080 24p on a TV that supports 1080 24p via HDMI connection Select this value to output the images in 1080 24p to a TV that AUTO supports 1080 24p Set to OFF if the images cannot be played back properly OFF Set to this value under normal circumstances x v Color Specify this setting when viewing video images recorded in x v Color on a TV that supports x v Color This enhances viewing through reproducing colours closely to their natural
37. ontrol the battery of the remote control is weak Replace it with a new battery Insert correctly according to the and directions indicated e If problem occurs while using the remote control remove the battery and insert it again before operating the remote control E When using the remote E When replacing the battery control for the first time Pull out the insulation sheet Lithium battery DP Connecting to the TV This burner TV HDMI input HDMI cable not provided e Images can only be displayed on a High bandwidth Digital Content Protection HDCP monitor e We recommend using the Category 2 HDMI cable High Speed cable for viewing in higher picture quality ee Connecting to a TV with Component Video Input Connectors Component video cable not provided Component video input 9Y Lo CB PB S Cr PR Audio in L 5 Audio in R e Connect to a High bandwidth Digital Content Protection HDCP monitor when using an HDMI DVI conversion cable Connecting to a TV with Audio Video Input Connectors This burner Video input Video input Mudio in L 4 Audio in R Audio Video cable provided Copying Everio Video to a DVD By connecting this burner to an Everio camera you can easily copy recorded images to a DVD Connecting to an Everio Camera e Thi
38. or cameras Using a lens cleaning disc will cause malfunction Disc Use a commercially available cleaning cloth to gently wipe from the inner edge to the outer edge Do not paste any stickers on the label side of the disc This will cause the center of rotation to deviate and increase the vibration of the rotating disc thereby affecting proper playback Storage Make sure that discs are kept in their cases If discs are piled on top of one another without their protective cases they can be damaged Do not put discs in a location where they may be exposed to direct sunlight or in a place where the humidity or temperature is high Avoid leaving discs in your car Region Codes Region codes are numbers for restricting DVD video playback The world is separated into six regions and each region is identified by a number If the number for a disc does not match the number for the player the disc cannot be played on the player JVC accepts no liability whatsoever for loss of data resulting from inappropriate connections or handling Copyrights Duplicating copyright protected material for other than personal use without the permission of the copyright holder is prohibited by copyright law Registered Trademarks and Trademarks e Microsoft Windows and Windows Vista are is either registered trademarks or trademarks of Microsoft Corporation in the United States and or other countries e Macintosh and Mac OS are trademarks of Apple
39. r specifying the black level of the video image DARKER Set to this value under normal circumstances BRIGHTER Set to this value to brighten the dark areas of the video image AUDIO SETTING DYNAMIC RANGE COMPRESSION For specifying the dynamic range ratio between strong and weak signals of audio sound Minute sounds may be heard when the dynamic range is compressed ON Outputs audio sound after compressing the dynamic range OFF Outputs the recorded audio sound without compressing CONNECTION SETTING MONITOR TYPE Specify the screen size according to the TV connected If the screen size of the TV is fixed images displayed on the TV will not change even if you change the settings of the burner When connecting to a wide screen TV 16 9 16 9 A black band will appear on both left and right sides for 4 3 images When connecting to a wide screen TV 16 9 4 3 images will be stretched sideways When connecting to a 4 3 TV The left and right sides of 16 9 images will be missing When connecting to a 4 3 TV 4 3 LETTERBOX A black band will appear at the top and bottom for 16 9 images Changing the setting may have no effect on some images 16 9FULL 4 3 PAN amp SCAN s CONNECTION SETTING COMPONENT OUTPUT For specifying the output resolution setting of the component connectors You can also specify the setti
40. rientation H Vertical orientation Align the groove on the bottom of this burner with the bulge on the Groove R stand and fix the burner securely on NS the stand G High side Sp J Low side Names and Functions of Each Part Front and Top Panel Power On Off Stop Power lamp Play Power on orange USB connected green Pause Reverse skip Forward skip Remote K control sensor O Tray Y Access lamp Ventilation holes To eject tray P 3 Do not block these ventilation holes Rear Panel Connect to the Everio camera P 14 Connect to the TV s component Connect to the PC P 16 video input connectors P 13 COMPONENT VIDEO OUT Connect to the Connect to the TV s Connect to the TV s video AC adapter HDMI input terminal input connector P 13 P 12 Connect to the TV s audio input connectors P 13 p Remote Control To display the tool menu P 25 To display the playback menu P 29 Power On Off Co To change the output VO RESOLUTION resolution of the image P 33 a Gs SETUP TOOL ys SCREEN To perform basic setup To display information on the P 34 NAVIGATION TOP MENU MENU screen P 39 To display the playback navigator P 27 To display the playback navigator P 23 To select confirm To return to the previous Basic playback screen operations P 25 28 e If the burner responds poorly to the remote c
41. rner according to the environment of use Menu Operation Procedures e The SET UP button can only function when the intermediate screen screen without image display is displayed If the playback navigator is displayed press STOP for AVCHD disc and DVD Video or NAVIGATION TOP MENU for data disc to clear the screen Example When changing MONITOR TYPE under CONNECTION SETTING from 16 9 to 4 3 LETTERBOX 1 Display the settings menu C SET UP TOOL ON SCREEN Eae s RESOLUTION J Select CONNECTION SETTING Select CAD Cay Confirm sega a Dorn Select MONITOR TYPE Select enn Gm lt gt Confirm EN SY SELECT TER ki Gern Select 4 3 LETTERBOX Select a Ce Confirm aaia Ce serga ki Deret Ea RESOLUTION O Close the settings menu 5 C SETUP TOOL ONSCREEN Tay ae Settings Menu Items and Descriptions indicates the default settings during purchase of this product Menu items for which setting cannot be changed will appear grayed out on the screen DISC SETTING If the disc contains more than one audio language subtitle language or has multi angle scenes you can select with this setting AUDIO LANGUAGE Set the audio language to be played back SUBTITLE Set the subtitle language to be displayed CHANGE ANGLE Switch the angle camera to be played back VIDEO SETTING BLACK LEVEL CONTROL Fo
42. s burner Off AC adapter USB connector T DC connector To power USB connector sl ply outlet USB cable provided with CU VD50 i To DC jack l m To power supply outlet e When the USB cable is connected all buttons on the remote control of this burner are not functional except the power button Creating AVCHD Disc Data Disc DVD Video E Discs that can be created on this burner Copy Playback High definition videos in Can be played back on AVCHD AVCHD Disc AVCHD format compatible devices such as Blu ray recorder or this burner P 23 Data Disc High definition videos in Play back on this burner P 23 MPEG 2 format Cannot be played back on other devices DVD Video Standard definition videos Can be played back on DVD recorder in MPEG 2 format DVD player or this burner P 27 e High definition Everio GZ HD30 HD40 supports both AVCHD and MPEG 2 format recording Other high definition Everio supports MPEG 2 format recording As of May 2008 Mose switch on Everio or 3 mode depending on the item to be copied e This burner On Turn on Everio e The Backup menu will appear on the Everio s LCD monitor 2 Insert a new disc e Refer to page 3 on how to insert the disc e Refer to page 2 for the recommended discs Create a AVCHD disc data disc or DVD Video e Refer to the instruction manual of your Everio camera on how to create a A
43. sc created on other devices is inserted 2 Select and confirm on the file using the remote control Select e Playback of the selected file starts e You can also press the PLAY button to play m back K a e You can browse the pages using the PREVIOUS NEXT buttons Confirm e To stop an AVCHD disc during playback press the STOP button When playback stops the intermediate screen will appear P 34 To display the playback navigator press the NAVIGATION TOP MENU button a E Digest Playback for AVCHD disc only e Use the selection keys to select DIGEST PLAYBACK and press the ENTER button The videos will be played back for several seconds consecutively e Press the NAVIGATION TOP MENU button during playback to display the sub menu TO NORMAL PLAYBACK Plays back the video normally TO INDEX MENU Returns to the playback navigator screen E To play back images in a different folder for data disc video still images only 1 Display the folder list Select folder name CAD Confirm Folder Name 2 Select the folder to play back e The playback navigator appears when the ENTER button is pressed Select and confirm on the file to be played back Select me C Cy Confirm e You can also select the folder from the TOOL MENU P 25 e Files are automatically sorted into the folders created depending on the item selected in the Backup menu of
44. sition OFF Do not memorise the stop position ON SCREEN GUIDE For specifying whether to display the playback status information AUTO Display for 5 seconds OFF Do not display ON SCREEN LANGUAGE For specifying the language to be displayed for the settings menu screen and others ENGLISH is set as the default language H Axa ENGLISH FRANGIAS DEUTSCH ITALIANO NEDERLANDS PORTUGUES ESPANOL W P3 H0 PYCCKUN SCREEN SAVER For specifying whether to activate the screensaver ON Activates the screensaver when this burner is not operated for an interval of 5 minutes OFF Do not activate the screensaver INITIALIZE SETTING Restores the settings to the default state at the time of purchase DATE DISPLAY STYLE For data disc only Sorts the dates in order year month day month day year day month year TIME DISPLAY CHOICE For data disc only For specifying the time display 12h 24h For resume function the stop position will be reset if the burner is connected to an Everio or a PC via the USB cable or when the burner is turned off and the disc is removed I Screen Displays You can display information during playback on the screen Vo RESOLUTION SETUP TOOL ONSCREEN Cc z Press each time to hide show information E During playback of AVCHD disc copied from a high definition Everio Chapter
45. ss Press the button when in the REV REV paused mode to enable reverse playback frame by frame Not available for AVCHD disc Reverse playback at slow speed is not possible pzs NEXT Displays the next video image Displays the next still image Displays the beginning of the Displays the previous still D PREMICUS video image image Rotates the still image by Ski Advances the playback position 90 degrees in the Z P by about 30 seconds clockwise direction When in paused mode Rotates the still image by Moves the playback position 90 degrees in the anti aS Replay backward by about 7 seconds clockwise direction When in paused mode Enlarges the still image 2 step You can select the position to enlarge using ENTER the Up Down Left Right buttons Press the RETURN button to restore the original size When in paused mode NAVIGATION TOP MENU NAVIGATION _ TOP MENU Displays the playback navigator Displays the playback navigator TOOL TOOL Displays the playback menu P 29 Displays the playback menu P 29 Viewing DVD Video Copied from Everio H To start viewing immediately after storing images on a DVD Remove the USB cable P 14 Connect this burner to the TV e For details on connection refer to Connecting to the TV P 12 13 e Check that the power lamp of this burner lights up in orange e After pressing the power button it
46. ssed repeatedly during playback Digest Playback will start when the normal playback ends P 24 yoegheld Unable to read the content of the AVCHD disc using the PC s explorer function Unable to play back images added by a PC The TV switches input automatically when the burner is played The TV turns off when this burner is turned off This burner functions when the TV s remote control is being operated gt gt gt gt gt The PC s operation system does not support the AVCHD disc Install the Power2Go software provided When playing back a disc multi border disc containing images added by a PC the added images cannot be played back The HDMI CEC function is enabled To disable set CONTROL WITH HDMI in the settings menu to OFF P 37 Problems with seamless playback During continuous playback of multiple files the image will freeze for a few seconds while switching the files in the following cases e When the recording dates are different The image will freeze for a few seconds when switching between files with different recording dates For files with the same date playback is seamless e When files are deleted If files are deleted and added after deleting during continuous recording the image will freeze for a few seconds at the part where deleting is done When no files are deleted playback is seamless e When the
47. the high definition Everio e To play back images copied from the PC select the edited video files P 22 e Select a folder name when you have created a folder on the PC according to your preference P 22 e If images do not appear check the resolution setting P 33 e For short video clips less than 3 seconds the image will freeze for a few seconds before playing the next file P 44 e For data disc video the image will freeze for a few seconds before continuing to the next folder e Depending on the still image standards some images are displayed using a thumbnail and playback may fail in this case e Progressive JPEG files and special files created on the PC cannot be played back Videos that are not playable are also displayed as e It may take some time to display the images if the size is too large or when there are too many files e For data disc still images created on a PC files with less than 640 x 480 resolution will not be displayed in full screen E Displaying the TOOL MENU for data disc video still images only You can switch between video still images or display file details from the TOOL MENU Operate when playback navigator is displayed TOOL MENU vo FEOL Select a mE i pean ES TOOL taD lt gt Confirm Select an item with the selection keys and press the ENTER button FOLDER SELECT Displays the folder list SWITCH
48. will take about 25 seconds to display the intermediate screen P 34 E To play back the copied files 1 Insert the disc containing the copied images e Playback starts automatically E To select and play back a desired file 1 Insert the disc containing the copied images e Playback starts automatically During playback press the NAVIGATION TOP MENU button to display the playback navigator Depending on the disc you can display the playback navigator by pressing the MENU button NAVIGATION TOF i I UN ji ae RETURN Select and confirm on the file to play back Select as CQ Confirm e To stop playback press the STOP button When playback stops the intermediate screen will appear P 34 To display the playback navigator press the NAVIGATION TOP MENU button e If images do not appear check the resolution setting P 33 E Buttons that can be used during playback DVD Video Remote Control Button Description amp PLAY PLAY Pressing this button when in the paused or variable speed playback mode resumes normal playback W PAUSE Pauses playback STOP STOP Stops playback FWD FWD Fast forwards playback Changes in the order of Search 1 to Search 3 with each press Press the button when in the paused mode to enable forward playback frame by frame Press and hold the button to slow down the playback speed
Download Pdf Manuals
Related Search