Home
Jasco 45250 Instruction Manual
Contents
1. 45250 Lithium Polymer Add On Battery Pack for 45233 45234 45236 Thank you for purchasing the GE 45250 Lithium Polymer Add on Battery Pack Please review these instructions carefully before attempting to use the battery pack with your camera This Rechargeable Lithium Polymer Battery will power the 45233 45234 or 45236 wireless cameras for approximately 5 hours on a single charge Using the camera with battery in the night vision mode usage is reduced to 2 hrs To order additional batteries please visit www jascoproducts com batteryoffer or call our Customer Support department at 1 800 654 8483 option 3 Monday Friday 8 a m 5 p m CST 1 Before using your battery with your wireless camera insure the battery has a full charge A red light on the back of the battery indicates that it is charging properly When it is fully charged the light will change to green 3 Use ONLY the AC adapter supplied with your camera to charge the battery 4 Your battery is rated to be charged approximately 500 times before replacing Wall or desktop mount AC adapter charges the battery Desktop Mount 1 Slide the camera onto the locking pins of the battery pack 2 Place camera in desired location on a flat surface 3 Set switch on battery to ON position 4 Adjust antenna and camera angle as desired On Off Switch Wall Mount 1 Wood screws with a flat head no larger than 3 16 in diameter are required to ensure ue s
2. crew heads fits inside of battery mount Screws and anchors not included 2 Drill two holes in the desired mounting location the same width as the mounting holes Screws on the battery a Install two wall anchors into the holes Insert screws into wall anchors b Or screw directly into a wall stud if anchors are not desired 3 Make sure the screw heads protrude slightly from the wall to allow the camera to mount 4 Secure camera to the wall by fitting the mounting slots on the back of the camera onto the screw heads in the wall Wall Mount 5 Set the ON OFF switch on the battery to ON position Slide the camera onto the locking pins of the battery pack 6 Adjust antenna and camera angle as desired TROUBLE SHOOTING 1 Check all connections Make sure camera s amp monitor are powered ON and battery is properly attached to camera 2 Ensure camera s amp monitor are set to correct channel s 3 Make sure camera s is within range of monitor or receiver 4 Make sure rechargeable battery is charged When battery has reached its end of life dispose according to your local or state regulations WARRANTY ONE YEAR LIMITED WARRANTY Jasco Products Company warrants this product to be free from manufacturing defects for a period of one year from the original date of consumer purchase This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to
3. other products that may be used with this unit This warranty is in lieu of all other warranties express or implied Some states do not allow limitations on how long an implied warranty lasts or permit the exclusion or limitation of incidental or consequential damages so the above limitations may not apply to you This warranty gives you specific rights and you may also have other rights which vary from state to state If unit should prove defective within the warranty period return prepaid with dated proof of purchase to Jasco Products Company 10 E Memorial Road Oklahoma City OK 73114 AWARNING is a trademark of General Electric Company Por ie une stoca a ni use the supohed cUL isted AC to DC adapter and is used under license to Jasco Products Company LLC See Teeth elds A A 10 E Memorial Road Oklahoma City OK 73114 E EPn www jascoproducts com
Download Pdf Manuals
Related Search
Related Contents
Easykey User Manual User Manual Reference manual Progress Lighting P2810-15WB Installation Guide (組立式イ果管庫取扱説明書 闘 Copyright © All rights reserved.
Failed to retrieve file