HP 72H3482 User's Manual
Contents
1. If you have an HP pre load ed HDD set the path to C Drivers Auto164 Disk2 Win95 c With the IBM Turbo 16 4 Token Ring ISA Adapter listed click on Finish d Click OK in order to provide Computer and Workgroup names e Enter your Computer Name Workgroup and Computer Descrip tion and click on the Configuration folder If you do not have a Com puter name Workgroup name and Computer description contact your network administrator f Clickon Close to complete the installation g When prompted for the file IBMTOK DOS set the path to A WIN95 and hit enter If you have an HP pre loaded HDD set the path to C Drivers Auto164 Disk2 Win95 h Click on YES to complete installation and restart the machine 9 Click on Next and then click on Finish 10 When Windows 95 has loaded click on Start then Settings and open the Control Panel 11 Double Click the Network icon and click on Add 12 Select to add an Adapter click on Add and then click on Have Disk 13 In the Install From Disk window insert the IBM TR drivers disk 2 of 4 set the path to A V and click on OK For HP preloaded hard disk drives set the path to C Masters LAN TRBO164 14 Select the IBM Turbo 16 4 Token Ring ISA Adapter and click on OK 15 Click on the Identification folder enter your Computer Name 4 Connecting to a Windows NT2. and verify the settings as listed above under the heading Device Configuration Make any changes exit LANAID and remove the drivers diskette Reboot the machine and allow it to boot to Windows 95 Windows 95 SR2 should automatically recognize the IBM Auto 16 4 TR adapter card Click on Next and then click on Finish 3 Connecting to a Windows NT Server 3 51 Windows 95 SR2 10 When Windows 95 has loaded click on Start then Settings and open the Control Panel 11 Double Click the Network icon and click on Add 12 Select to add an Adapter click on Add and then click on Have Disk 13 In the Install From Disk window insert the IBM TR drivers disk 2 of 4 set the path to A V and click on OK For HP preloaded hard disk drives set the path to C Masters LAN TRBO164 14 Select the IBM Turbo 16 4 Token Ring ISA Adapter and click on OK 15 Click on the Identification folder enter your Computer Name Workgroup and Computer Description and click on OK If you do not have a Computer name Workgroup name and Computer description contact your network administrator 16 When prompted for your Windows 95 CD ROM click on OK 17 Set the path to your Windows 95 files and click on OK If you have an HP pre loaded HDD set the path statement C MASTERS WINQS SYSTEM CABS 18 Click on YES
3. VIEW to check the adapter settings and verify the data listed under device configuration Remove the IBM TR drivers disk 1 of 4 power on the machine and boot to Windows NT 3 51 After windows loads log onto the machine with administrator privileges If you do not have the required information contact your network administrator Open the Main program group double click on the Control Panel icon Select the Network icon in the Control Panel program group 4 Connecting to a Windows NT Server 4 0 Windows NT Workstation Version3 51 10 Click on YES in the Network Settings dialog box and NT Networking will be installed on your computer 11 Insert the Windows NT Workstation CD 12 In Windows NT Setup set the path to your NT files and click on the Continue button If you have an HP preloaded HDD set path to CN386 13 Click on the Do Not Detect button from the Network Adapter Card Detection dialog box and click on Continue in the second Network Adapter Card Detection dialog box 14 From the Drop Down List scroll down and select lt Other gt Requires disk from manufacturer then click on Continue 15 Set path to A NT in the Insert Disk dialog box and then insert the IBM 16 4 drivers disk 2 of 4 If you have an HP preloaded HDD set path to C Masters LanDrv Turbo164 disk2 NT 16 Click OK at the Insta
4. 4 0 Server Windows for Workgroups 5 Type VIEW and verify the settings as listed above under the heading Device Configuration 6 Make any changes exit LANAID and remove the drivers diskette 7 Reboot the machine to Windows open the NETWORK folder and double click the NETWORK SETUP icon 8 Select Networks and choose Install Microsoft Windows Network and click on OK 9 Click on Drivers and then on Add Adapter 10 With Unlisted or Updated Network Adapter listed click on OK If you are using a Vectra VL8 go directly to step 11 If you are using a VE7 VE8 follow the instructions below to complete the installation a Insert the IBM Turbo 16 4 Token Ring drivers disk 2 of 4 set the path to AN and hit enter If you have an HP pre loaded HDD set the path to C Drivers Auto164 Disk2 b Select IBM Turbo 16 4 Token Ring ISA Adapter NDIS2 3 ODI and click on OK c Accept the default Network Drivers and click on Close e IBM Token Ring Network Adapter NDIS 3 ODI e Microsoft NetBEUI e IPX SPX Compatible Transport with NetBIOS d Atthe Network Setup dialog box click OK e Setyour User Name Workgroup and Computer Name and click OK If you do not have the required information contact your network ad ministrator f When prompted for the file IBMTOK5 386 insert the IBM Auto 16 4 drivers disk 2 set the path to A WFW and click on OK If y
5. NWLink NetBIOS transfer protocols Device Configuration e Interrupt 3 e 1 O Address A20 A23 e ROM Address CC000 CDFFF e Token Ring Rate 16 Procedure 1 With the HP Vectra VL8 turned off install the IBM Turbo 16 4 TR adapter card into an ISA slot Insert the IBM TR drivers disk 1 of 4 and power on the machine After the machine boots select option 2 IBM Turbo 16 4 Token Ring ISA Configuration Using LANAIDC and hit enter When prompted press any key to continue with the LANAID setup program Type VIEW to check the adapter settings and verify the data listed under device configuration Remove the IBM TR drivers disk 1 of 4 power on the machine and boot to Windows NT 4 0 After windows loads log onto the machine with administrator privileges If you do not have the required information contact your network administrator Right click on the Network Neighborhood icon and select Properties Click on YES in the Network Configuration dialog box and NT Networking will be installed on your computer 3 Connecting to a Windows NT Server 3 51 Windows NT Workstation Version 4 0 10 In the Network Setup Wizard dialog box make sure that Wired to the Network is checked and click on Next 11 Click on Select from list and click on Have Disk and set path to AANT If you have a preloaded HDD set path to C Masters LanDrv Turbo164 DISK2 NT 12 Inthe Selec
6. Size 30KB Date 1 30 98 e Microsoft Windows 95 SR2 media e Microsoft Windows NT 4 0 server that supports Net BEUI NWLink IPX SPX and NWLink NetBIOS transfer protocols Device Configuration Vectra VL8 Vectra VE7 VE8 Interrupt 10 3 1 0 Address A20 EFC EFF Adapter Mode Auto16 Compatible Configuration Automatic RAM Address D8000 D9FFF RAM Size 16Kb ROM Address C8000 COFFF Token Ring Rate 16 Procedure 1 With the HP Vectra turned off install the IBM Auto 16 4 TR adapter card into an ISA slot 2 Insert the IBM TR drivers disk 1 of 4 and power on the machine 3 After the machine boots select option 2 IBM Auto 16 4 Token Ring ISA Configuration using LANAID and hit enter 4 When prompted press any key to continue with the LANAID setup program 5 Type VIEW and verify the settings as listed above under the heading Device Configuration 6 Make any changes exit LANAID and remove the drivers diskette 4 Connecting to a Windows NT Server 4 0 Windows 95 SR2 7 Rebootthe machine and allow it to boot to Windows 95 8 Windows 95 SR2 should automatically recognize the IBM Auto 16 4 TR adapter card If you are using a Vectra VL8 go directly to step 9 If you are using a Vectra VE7 VE8 follow the instructions below to complete the installation a Clickon Next on Other Locations and insert the IBM TR drivers disk 2 of 4 b Set the path to A WIN95 and hit enter
7. a Windows NT Server 4 0 Windows NT Workstation Version 4 0 10 In the Network Setup Wizard dialog box make sure that Wired to the Network is checked and click on Next 11 Click on Select from list and click on Have Disk and set path to AANT If you have a preloaded HDD set path to C Masters LanDrv Turbo164 DISK2 NT 12 Inthe Select OEM Option dialog box make sure that IBM Shared RAM Token Ring Adapter is highlighted and click on OK and then click on Next 13 Select all applicable protocols and click on Next If you do not have the required information contact your network administrator 14 Select all required network services and click on Next If you do not have the required information contact your network administrator 15 Click on Next to start component installation 16 Insert the Windows NT Workstation CD 17 In Windows NT Setup set the path to your NT files and click on the Continue button If you have an HP preloaded HDD set path to C I386 18 Setup will ask for your driver files location again Enter A NT If you have a preloaded HDD set path to C Masters LanDrv Turbo164 DISK2 NT 19 Select IBM Turbo 16 4 Token Ring ISA Adapter and click on OK 20 Select the applicable I O address and click on OK 21 Approve the default Bus Location and hit enter 22 Click on Yes or N
8. the machine 9 Click on Next and then click on Finish 10 When Windows 95 has loaded click on Start then Settings and open the Control Panel 11 Double Click the Network icon and click on Add 12 Select to add an Adapter click on Add and then click on Have Disk 13 In the Install From Disk window insert the IBM TR drivers disk 2 of 4 set the path to A V and click on OK For HP preloaded hard disk drives set the path to C Masters LAN TRBO164 14 Select the IBM Turbo 16 4 Token Ring ISA Adapter and click on OK 15 Click on the Identification folder enter your Computer Name 1 Connecting to a Netware 3 12 Server Windows 95 SR2 Workgroup and Computer Description and click on OK If you do not have a Computer name Workgroup name and Computer description contact your network administrator 16 When prompted for your Windows 95 CD ROM click on OK 17 Set the path to your Windows 95 files and click on OK If you have an HP pre loaded HDD set the path statement C MASTERS WINQS SYSTEM CABS 18 Click on YES to complete installation and restart the machine 1 Connecting to a Netware 3 12 Server Windows 95 SR2 Windows for Workgroups 2 Connecting to a Netware 4 11 Server Windows for Workgroups 2 Connecting to a Netware 4 11 Server Reguirements HP Vectra VL8 with Wind
9. to complete installation and restart the machine Windows NT Workstation Version3 51 3 Connecting to a Windows NT Server 3 51 Windows NT Workstation Version3 51 Reguirements HP Vectra with Windows NT Workstation 3 51 installed IBM Turbo 16 4 TR adapter and drivers diskettes ver 2 1 Driver Name IBMTOKS SYS Size 51KB Date 9 28 96 DOS and MS Windows NT workstation 3 51 media Microsoft NT 3 51 server that supports Net BEUI TCP IP NWLink IPX SPX and NWLink NetBIOS transfer protocols Device Configuration e Interrupt 3 e 1 O Address EFC EFF e ROM Address C8000 C9FFF e Token Ring Rate 16 Procedure 1 With the HP Vectra turned offinstall the IBM Turbo 16 4 TR adapter card into an ISA slot Insert the IBM TR drivers disk 1 of 4 and power on the machine After the machine boots select option 2 IBM Turbo 16 4 Token Ring ISA Configuration Using LANAIDC and hit enter When prompted press any key to continue with the LANAID setup program Type VIEW to check the adapter settings and verify the data listed under device configuration Remove the IBM TR drivers disk 1 of 4 power on the machine and boot to Windows NT 3 51 After windows loads log onto the machine with administrator privileges If you do not have the required information contact your network administrator Open the Main program group double click on the Control Panel icon Select the Network icon in the
10. 2 20 for Turbo 16 4 Token Ring ISA screen comes up chose Adapter Configuration 14 Check the adapter settings and verify the data listed under device configuration 15 After exiting the utility remove diskette from drive and press lt CRTL gt lt ALT gt lt DEL gt to restart the machine 16 After Windows loads open the NetWare User Applications folder and double click the NetWare User Tools icon 17 Verify that a NetWare server has been mapped to your F drive Windows 95 SR2 Reguirements 2 Connecting to a Netware 4 11 Server Windows 95 SR2 e HP Vectra with Windows 95 SR2 installed e IBM Auto 16 4 TR adapter and drivers diskettes ver 2 1 Driver Name NETIBM4 INF Size 30KB Date 1 30 98 e Microsoft Windows 95 SR2 media e Novell Netware 4 1 server that supports Net BEUI NWLink IPX SPX and NWLink NetBIOS transfer protocols Device Configuration Vectra VL8 Vectra VE7 VE8 Interrupt 10 3 1 0 Address A20 EFC EFF Adapter Mode Auto16 Compatible Configuration Automatic RAM Address D8000 D9FFF RAM Size 16 Kb ROM Address C8000 COFFF Token Ring Rate 16 Procedure 1 With the HP Vectra turned off install the IBM Auto 16 4 TR adapter card into an ISA slot 2 Insert the IBM TR drivers disk 1 of 4 and power on the machine 3 After the machine boots select option 2 IBM Auto 16 4 Token Ring ISA Configuration using LANAID and hit enter 4 When prompted p
11. Connecting to a Windows NT Server 4 0 Windows NT Workstation Version 4 0 Reguirements HP Vectra VL8 with Windows NT Workstation 4 0 installed IBM Turbo 16 4 TR adapter and drivers diskettes ver 2 1 Driver Name IBMTOKS SYS Size 51KB Date 9 28 96 DOS and MS Windows NT workstation 4 0 media Microsoft NT 4 0 server that supports Net BEUI TCP IP NWLink IPX SPX and NWLink NetBIOS transfer protocols Device Configuration e Interrupt 3 e 1 O Address A20 A23 e ROM Address CC000 CDFFF e Token Ring Rate 16 Procedure 1 With the HP Vectra VL8 turned off install the IBM Turbo 16 4 TR adapter card into an ISA slot Insert the IBM TR drivers disk 1 of 4 and power on the machine After the machine boots select option 2 IBM Turbo 16 4 Token Ring ISA Configuration Using LANAIDC and hit enter When prompted press any key to continue with the LANAID setup program Type VIEW to check the adapter settings and verify the data listed under device configuration Remove the IBM TR drivers disk 1 of 4 power on the machine and boot to Windows NT 4 0 After windows loads log onto the machine with administrator privileges If you do not have the required information contact your network administrator Right click on the Network Neighborhood icon and select Properties Click on YES in the Network Configuration dialog box and NT Networking will be installed on your computer 4 Connecting to
12. Control Panel program group 3 Connecting to a Windows NT Server 3 51 Windows NT Workstation Version3 51 10 Click on YES in the Network Settings dialog box and NT Networking will be installed on your computer 11 Insert the Windows NT Workstation CD 12 In Windows NT Setup set the path to your NT files and click on the Continue button If you have an HP preloaded HDD set path to C I386 13 Click on the Do Not Detect button from the Network Adapter Card Detection dialog box and click on Continue in the second Network Adapter Card Detection dialog box 14 From the Drop Down List scroll down and select lt Other gt Requires disk from manufacturer then click on Continue 15 Set path to A NT in the Insert Disk dialog box and then insert the IBM 16 4 drivers disk 2 of 4 If you have an HP preloaded HDD set path to C Masters LanDrv Turbo164 disk2 NT 16 Click OK at the Install Driver dialog box 17 Select IBM Turbo 16 4 Token Ring ISA Adapter in the Select OEM Option dialog box and click OK 18 Select the applicable I O address and click on OK 19 Approve the default Bus Location and hit enter 20 Choose the applicable protocols by clicking the check boxes in the Windows NT Setup dialog box and click Continue If you do not have the required information contact your network administ
13. Kin HEWLETT PACKARD Turbo16 4 Token Ring Network ISA Adapter 12H3482 Installation Guide Notice The information contained in this document is subject to change without notice Hewlett Packard makes no warranty of any kind with regard to this material including but not limited to the implied warranties of merchantability and fitness for a particular purpose Hewlett Packard shall not be liable for errors contained herein or for incidental or conseguential damages in connection with the furnishing performance or use of this material Hewlett Packard assumes no responsibility for the use or reliability of its software on eguipment that is not furnished by Hewlett Packard This document contains proprietary information that is protected by copyright All rights are reserved No part of this document may be photocopied reproduced or translated to another language without the prior written consent of Hewlett Packard Company Microsoft Windows and MS DOS are registered trademarks of Microsoft Corporation MMX is a trademark of Intel Corporation Pentium is a registered trademark of Intel Corporation Hewlett Packard France Commercial Desktop Computing Division 38053 Grenoble Cedex 9 France 1998 Hewlett Packard Company Windows for Workgroups 1 Connecting to a Netware 3 12 Server Windows for Workgroups 1 Connecting to a Netware 3 12 Server Reguirements HP Vectra VL8 with Windows for Workgrou
14. Server 4 0 Windows 95 SR2 Workgroup and Computer Description and click on OK If you do not have a Computer name Workgroup name and Computer description contact your network administrator 16 When prompted for your Windows 95 CD ROM click on OK 17 Set the path to your Windows 95 files and click on OK If you have an HP pre loaded HDD set the path statement C MASTERS WINQS SYSTEM CABS 18 Click on YES to complete installation and restart the machine Windows NT Workstation Version3 51 4 Connecting to a Windows NT Server 4 0 Windows NT Workstation Version3 51 Reguirements HP Vectra VL8 with Windows NT Workstation 3 51 installed IBM Turbo 16 4 TR adapter and drivers diskettes ver 2 1 Driver Name IBMTOKS SYS Size 51KB Date 9 28 96 DOS and MS Windows NT workstation 3 51 media Microsoft NT 4 0 server that supports Net BEUI TCP IP NWLink IPX SPX and NWLink NetBIOS transfer protocols Device Configuration e Interrupt 3 e 1 O Address EFC EFF e ROM Address C8000 C9FFF e Token Ring Rate 16 Procedure 1 With the HP Vectra VL8 turned off install the IBM Turbo 16 4 TR adapter card into an ISA slot Insert the IBM TR drivers disk 1 of 4 and power on the machine After the machine boots select option 2 IBM Turbo 16 4 Token Ring ISA Configuration Using LANAIDC and hit enter When prompted press any key to continue with the LANAID setup program Type
15. ault Network Drivers and click on Close O IBM Token Ring ISA Adapter NDIS2 only NDIS2 O Microsoft NetBEUI O IPX SPX Compatible Transport with NetBIOS 14 At the Network Setup dialog box click OK 15 Set your User Name Workgroup and Computer Name and click OK If you do not have the required information contact your network administrator 16 At the Network Setup dialogue box click on OK to continue 17 Agree to Restart the Computer to complete the installation Windows 95 SR2 3 Connecting to a Windows NT Server 3 51 Windows 95 SR2 Reguirements HP Vectra with Windows 95 SR2 installed IBM Auto 16 4 TR adapter and drivers diskettes ver 2 1 Driver Name NETIBM4 INF Size 30KB Date 1 30 98 Microsoft Windows 95 SR2 media Microsoft Windows NT 3 51 server that supports Net BEUI NWLink IPX SPX and NWLink NetBIOS transfer protocols Device Configuration e Adapter Mode Autol6 Compatible e Configuration Automatic e Interrupt 10 e I O Address A20 e RAM Address D8000 D9FFF e RAM Size 16 Kb Procedure 1 With the HP Vectra turned off install the IBM Auto 16 4 TR adapter card into an ISA slot Insert the IBM TR drivers disk 1 of 4 and power on the machine After the machine boots select option 2 IBM Auto 16 4 Token Ring ISA Configuration using LANAID and hit enter When prompted press any key to continue with the LANAID setup program Type VIEW
16. guirements e HP Vectra with Windows for Workgroups 3 11 installed e IBM Auto 16 4 TR adapter and drivers diskettes ver 2 20 Driver Name IBMTOK5 386 Size 46K Date 9 28 96 e Microsoft Windows for Workgroups 3 11 media e Microsoft Windows NT 3 51 server that supports Net BEUI NWLink IPX SPX and NWLink NetBIOS transfer protocols Device Configuration Vectra VL8 VE7IVE8 PnP Support BIOS BIOS Adapter Mode ISA16 Compatible Configuration AUTOMATIC 1 0 Address A20 EFC EFF Interrupt 10 3 RAM Address D8000 DBFFF ROM Address C8000 COFFF Token Ring Rate 16 Procedure 1 With the HP Vectra turned off install the IBM Auto 16 4 TR adapter card into an ISA slot 2 Insert the IBM TR drivers disk 1 of 4 and power on the machine 3 After the machine boots select option 1 IBM Auto 16 4 Token Ring ISA Configuration using LANAID and hit enter 4 When prompted press any key to continue with the LANAID setup program 3 Connecting to a Windows NT 3 51 Server Windows for Workgroups 5 Type VIEW and verify the settings as listed above under the heading Device Configuration 6 Make any changes exit LANAID and remove the drivers diskette 7 Reboot the machine to Windows open the NETWORK folder and double click the NETWORK SETUP icon 8 Select Networks and choose Install Microsoft Windows Network and click on OK 9 Click on Drivers and then o
17. h the LANAID setup program 5 Type VIEW and verify the settings as listed above under the heading Device Configuration 6 Make any changes exit LANAID and remove the drivers diskette 1 Connecting to a Netware 3 12 Server Windows 95 SR2 7 Rebootthe machine and allow it to boot to Windows 95 8 Windows 95 SR2 should automatically recognize the IBM Auto 16 4 TR adapter card If you are using a Vectra VL8 go directly to step 9 If you are using a Vectra VE7 VE8 follow the instructions below to complete the installation Click on Next to provide the driver then click on Other Locations b Insert the IBM Turbo 16 4 Token Ring ISA Adapter diskette 2 of 4 set the path to A WIN95 and click OK For HP preloaded hard disk drives set the path to C MASTERS LAN TRBO164 Disk2 Win95 c With IBM Turbo 16 4 Token Ring ISA Adapter listed in the device wiz ard click on Finish d Click on OK in order to provide Computer and Workgroup names e At the Network dialogue box click on the Identification folder f Enter your Computer Name Workgroup and Computer Descrip tion and click on Close If you do not have a Computer name Work group name and Computer description contact your network administrator g When prompted for the file IBMTOK DOS set the path to AADOSY and hit enter h Remove the IBM Turbo 16 4 Token Ring ISA Adapter diskette and click on YES to complete installation and restart
18. ll Driver dialog box 17 Select IBM Turbo 16 4 Token Ring ISA Adapter in the Select OEM Option dialog box and click OK 18 Select the applicable I O address and click on OK 19 Approve the default Bus Location and hit enter 20 Choose the applicable protocols by clicking the check boxes in the Windows NT Setup dialog box and click Continue If you do not have the required information contact your network administrator 21 Check the boxes to add additional TCP IP components and click on the Continue button 22 Click OK for the review of network settings in the Network Settings dialog box 23 If applicable approve the default settings in the NWLink IPX SPX Protocol Configuration 24 Set your IP address information in the TCP IP Configuration dialog box and click OK If you do not have the required TCP IP Settings contact your network administrator 4 Connecting to a Windows NT Server 4 0 Windows NT Workstation Version3 51 25 At the Domain Workgroup Settings dialog box click on OK to accept the default Workgroup as your workgroup name If you do not have the required information contact your network administrator 26 To complete the installation remove the floppy disk and click on Restart Computer button in the Windows NT Workstation Networking Setup dialog box Windows NT Workstation Version 4 0 4
19. mplete installation and restart the machine 9 Click on Next and then click on Finish 10 When Windows 95 has loaded click on Start then Settings and open the Control Panel 11 Double Click the Network icon and click on Add 12 Select to add an Adapter click on Add and then click on Have Disk 13 In the Install From Disk window insert the IBM TR drivers disk 2 of 4 set the path to A V and click on OK For HP preloaded hard disk drives set the path to C Masters LAN TRBO164 14 Select the IBM Turbo 16 4 Token Ring ISA Adapter and click on OK 15 Click on the Identification folder enter your Computer Name 2 Connecting to a Netware 4 11 Server Windows 95 SR2 Workgroup and Computer Description and click on OK If you do not have a Computer name Workgroup name and Computer description contact your network administrator 16 When prompted for your Windows 95 CD ROM click on OK 17 Set the path to your Windows 95 files and click on OK If you have an HP pre loaded HDD set the path statement C MASTERS WINQS SYSTEM CABS 18 Click on YES to complete installation and restart the machine 2 Connecting to a Netware 4 11 Server Windows 95 SR2 Windows for Workgroups 3 Connecting to a Windows NT 3 51 Server Windows for Workgroups 3 Connecting to a Windows NT 3 51 Server Re
20. n Add Adapter 10 With Unlisted or Updated Network Adapter listed click on OK If you are using a Vectra VL8 go directly to step 11 If you are using a Vectra VE7 VE8 follow the instructions below to complete the installation a Insert the IBM Turbo 16 4 Token Ring drivers disk 2 of 4 set the path to A and hit enter If you have an HP pre loaded HDD set the path to C Drivers Auto164 Disk2 b Select IBM Turbo 16 4 Token Ring ISA Adapter NDIS2 3 ODI and click on OK c Accept the default Network Drivers and click on Close e IBM Token Ring Network Adapter NDIS 3 ODI e Microsoft NetBEUI e IPX SPX Compatible Transport with NetBIOS d Atthe Network Setup dialog box click OK e Setyour User Name Workgroup and Computer Name and click OK If you do not have the required information contact your network ad ministrator f When prompted for the file IBMTOK5 386 insert the IBM Auto 16 4 drivers disk 2 set the path to A WFW and click on OK If you have an HP pre loaded HDD set the path to C Driv ers Auto164 Disk2 WFW g At the Windows Setup message prompt click on OK then restart the computer 11 Set the Install Driver path to A insert the IBM TR drivers disk 2 of 4 and click on OK 3 Connecting to a Windows NT 3 51 Server Windows for Workgroups 12 Select IBM Turbo 16 4 Token Ring ISA Adapter NDIS2 only and click on OK 13 Accept the def
21. o for DHCP server setup If you do not have the required information contact your network administrator 23 Set your IP address information in the TCP IP Properties dialog box and click OK 24 Click on Next to accept the default network binding settings 25 Click on Next to start NT networking 4 Connecting to a Windows NT Server 4 0 Windows NT Workstation Version 4 0 26 At the Domain Workgroup Settings dialog box click on OK to accept the default Workgroup as your workgroup name If you do not have the required information contact your network administrator 27 To complete the installation remove the floppy disk and click on Finish button in the Network Setup Wizard dialog box 4 Connecting to a Windows NT Server 4 0 Windows NT Workstation Version 4 0 Version Number IBM Turbo 16 4 Rev 1
22. ou have an HP pre loaded HDD set the path to C Driv ers Auto164 Disk2 WFW g At the Windows Setup message prompt click on OK then restart 11 Set the Install Driver path to A WFWY insert the IBM TR drivers disk 2 of 4 and click on OK 12 Select IBM Turbo 16 4 Token Ring ISA Adapter NDIS2 only and click 4 Connecting to a Windows NT 4 0 Server Windows for Workgroups on OK 13 Accept the default Network Drivers and click on Close e IBM Token Ring ISA Adapter NDIS2 only NDIS2 e Microsoft NetBEUI e IPX SPX Compatible Transport with NetBIOS 14 At the Network Setup dialog box click OK 15 Set your User Name Workgroup and Computer Name and click OK If you do not have the required information contact your network administrator 16 When prompted for the file LT2 MSG insert the IBM TR drivers disk 2 of 4 set the path to A and click on OK If you have an HP pre loaded HDD set the path to C Drivers Auto164 Disk2 WFW 17 At the Network Setup dialogue box click on OK to continue 18 Agree to Restart the Computer to complete the installation 4 Connecting to a Windows NT 4 0 Server Windows for Workgroups Windows 95 SR2 Reguirements 4 Connecting to a Windows NT Server 4 0 Windows 95 SR2 e HP Vectra with Windows 95 SR2 installed e IBM Auto 16 4 TR adapter and drivers diskettes ver 2 1 Driver Name NETIBM4 INF
23. ows for Workgroups 3 11 installed IBM Auto 16 4 TR adapter and drivers diskettes ver 2 20 Driver Name IBMTOK DOS Size 18KB Date 6 13 96 Microsoft Windows for Workgroups 3 11 media Novell Netware 4 1 server that supports Net BEUI NWLink IPX SPX and NWLink NetBIOS transfer protocols Device Configuration e Interrupt 3 e 1 O Address A20 A23 e ROM Address C8000 C9FFF e Token Ring Rate 16 Procedure 1 a A WwW N With the Vectra VL8 turned off install the IBM Auto 16 4 TR adapter card into an ISA slot Connect network cable media to the Auto 16 4 TR adapter card power on the machine to a DOS prompt Insert the IBM Turbo 16 4 LANAID disk 1 and type A INSTALL At the LANAID installation screen enter the following OC O Vanaid When the LANAID v2 20 for Turbo 16 4 Token Ring ISA screen comes up chose Software Installation At the Software Installation screen select O DOS with Windows v3 1x O Custom Install selected LAN Client drivers 2 Connecting to a Netware 4 11 Server Windows for Workgroups O NetWare Client 32 O NetBIOS O IEEE 802 2 8 Select the Continue button 9 Atthe IBM LAN Client Configuration screen use the defaults and select the Install button 10 Insert disks 2 4 when prompted 11 When you have received notification that the installation has completed select OK 12 At the Installation Log screen select Close 13 When the LANAID v
24. ps 3 11 installed IBM Auto 16 4 TR adapter and drivers diskettes ver 2 20 Driver Name IBMTOK DOS Size 18KB Date 6 13 96 Microsoft Windows for Workgroups 3 11 media Novell Netware 3 12 server that supports Net BEUI NWLink IPX SPX and NWLink NetBIOS transfer protocols Device Configuration e Interrupt 3 e 1 O Address A20 A23 e ROM Address C8000 C9FFF e Token Ring Rate 16 Procedure 1 a A UU N With the Vectra VL8 turned off install the IBM Auto 16 4 TR adapter card into an ISA slot Connect network cable media to the Auto 16 4 TR adapter card Power on the machine to a DOS prompt Insert the IBM Turbo 16 4 LANAID disk 1 and type A INSTALL At the LANAID installation screen enter the following OC O Vanaid When the LANAID v2 20 for Turbo 16 4 Token Ring ISA screen comes up chose Software Installation At the Software Installation screen select O DOS with Windows v3 1x O Custom Install selected LAN Client drivers 1 Connecting to a Netware 3 12 Server Windows for Workgroups O NetWare Client 32 O NetBIOS O IEEE 802 2 8 Select the Continue button 9 Atthe IBM LAN Client Configuration screen use the defaults and select the Install button 10 Insert disks 2 4 when prompted 11 When you have received notification that the installation has completed select OK 12 At the Installation Log screen select Close 13 When the LANAID v2 20 for Tu
25. rator 21 Check the boxes to add additional TCP IP components and click on the Continue button 22 Click OK for the review of network settings in the Network Settings dialog box 23 If applicable approve the default settings in the NWLink IPX SPX Protocol Configuration 24 Set your IP address information in the TCP IP Configuration dialog box and click OK If you do not have the required TCP IP Settings contact your network administrator 3 Connecting to a Windows NT Server 3 51 Windows NT Workstation Version3 51 25 At the Domain Workgroup Settings dialog box click on OK to accept the default Workgroup as your workgroup name If you do not have the required information contact your network administrator 26 To complete the installation remove the floppy disk and click on Restart Computer button in the Windows NT Workstation Networking Setup dialog box 3 Connecting to a Windows NT Server 3 51 Windows NT Workstation Version3 51 Windows NT Workstation Version 4 0 3 Connecting to a Windows NT Server 3 51 Windows NT Workstation Version 4 0 Reguirements HP Vectra VL8 with Windows NT Workstation 4 0 installed IBM Turbo 16 4 TR adapter and drivers diskettes ver 2 1 Driver Name IBMTOKS SYS Size 51KB Date 9 28 96 DOS and MS Windows NT workstation 3 51 4 0 media Microsoft NT 3 51 server that supports Net BEUI TCP IP NWLink IPX SPX and
26. rbo 16 4 Token Ring ISA screen comes up chose Adapter Configuration 14 Check the adapter settings and verify the data listed under device configuration 15 After exiting the utility remove diskette from drive and press lt CRTL gt lt ALT gt lt DEL gt to restart the machine 16 After Windows loads open the NetWare User Applications folder and double click the NetWare User Tools icon 17 Verify that a NetWare server has been mapped to your F drive 1 Connecting to a Netware 3 12 Server Windows 95 SR2 Windows 95 SR2 Reguirements HP Vectra with Windows 95 SR2 installed IBM Auto 16 4 TR adapter and drivers diskettes ver 2 1 Driver Name NETIBM4 INF Size 30KB Date 1 30 98 Microsoft Windows 95 SR2 media Novell Netware 3 12 server that supports Net BEUI NWLink IPX SPX and NWLink NetBIOS transfer protocols Device Configuration Vectra VL8 Vectra VE7 VE8 Adapter Mode Auto16 Compatible Configuration Automatic Interrupt 10 3 1 0 Address A20 EFC EFF RAM Address D8000 DSFFF RAM Size 16 Kb ROM Address C8000 COFFF Token Ring Rate 16 Procedure 1 With the HP Vectra turned off install the IBM Auto 16 4 TR adapter card into an ISA slot 2 Insertthe IBM TR drivers disk 1 of 4 and power on the machine 3 After the machine boots select option 2 IBM Auto 16 4 Token Ring ISA Configuration using LANAID and hit enter 4 When prompted press any key to continue wit
27. ress any key to continue with the LANAID setup program 5 Type VIEW and verify the settings as listed above under the heading Device Configuration 6 Make any changes exit LANAID and remove the drivers diskette 2 Connecting to a Netware 4 11 Server Windows 95 SR2 7 Rebootthe machine and allow it to boot to Windows 95 8 Windows 95 SR2 should automatically recognize the IBM Auto 16 4 TR adapter card If you are using a Vectra VE7 VE8 follow the instructions below to complete the procedure If you are using a Vectra VL8 go directly to step 9 Click on Next to provide the driver then click on Other Locations b Insert the IBM Turbo 16 4 Token Ring ISA Adapter diskette 2 of 4 set the path to A WIN95 and click OK For HP preloaded hard disk drives set the path to C MASTERS LAN TRBO164 Disk2 Win95 c With IBM Turbo 16 4 Token Ring ISA Adapter listed in the device wiz ard click on Finish d Click on OK in order to provide Computer and Workgroup names e At the Network dialogue box click on the Identification folder f Enter your Computer Name Workgroup and Computer Descrip tion and click on Close If you do not have a Computer name Work group name and Computer description contact your network administrator g When prompted for the file IBMTOK DOS set the path to AADOSY and hit enter h Remove the IBM Turbo 16 4 Token Ring ISA Adapter diskette and click on YES to co
28. t OEM Option dialog box make sure that IBM Shared RAM Token Ring Adapter is highlighted and click on OK and then click on Next 13 Select all applicable protocols and click on Next If you do not have the required information contact your network administrator 14 Select all required network services and click on Next If you do not have the required information contact your network administrator 15 Click on Next to start component installation 16 Insert the Windows NT Workstation CD 17 In Windows NT Setup set the path to your NT files and click on the Continue button If you have an HP preloaded HDD set path to C11386 18 Setup will ask for your driver files location again Enter A NT If you havea preloaded HDD set path to C Masters LanDrv Turbo164 DISK2 NT 19 Select IBM Turbo 16 4 Token Ring ISA Adapter and click on OK 20 Select the applicable I O address and click on OK 21 Approve the default Bus Location and hit enter 22 Click on Yes or No for DHCP server setup If you do not have the required information contact your network administrator 23 Set your IP address information in the TCP IP Properties dialog box and click OK 24 Click on Next to accept the default network binding settings 25 Click on Next to start NT networking 26 At the Domain Workgroup Settings dialog bo
29. x click on OK to accept the default Workgroup as your workgroup name If you do not have the required information contact your network administrator 27 To complete the installation remove the floppy disk and click on Finish button in the Network Setup Wizard dialog box Windows for Workgroups 4 Connecting to a Windows NT 4 0 Server Windows for Workgroups 4 Connecting to a Windows NT 4 0 Server Reguirements e HP Vectra with Windows for Workgroups 3 11 installed e IBM Auto 16 4 TR adapter and drivers diskettes ver 2 1 Driver Name IBMTOK5 386 Size 46K Date 9 28 96 e Microsoft Windows for Workgroups 3 11 media e Microsoft Windows NT 4 0 server that supports Net BEUI NWLink IPX SPX and NWLink NetBIOS transfer protocols Device Configuration Vectra VL8 Vectra VE7 VE8 Interrupt 10 3 1 0 Address A20 EFC EFF Adapter Mode Auto16 Compatible Adapter Automatic Configuration RAM Address D8000 D9FFF RAM Size 16 KB ROM Address C8000 C9FFF Token Ring Rate 16 Procedure 1 With the HP Vectra turned off install the IBM Auto 16 4 TR adapter card into an ISA slot 2 Insert the IBM TR drivers disk 1 of 4 and power on the machine 3 After the machine boots select option IBM Auto 16 4 Token Ring ISA Configuration using LANAID and hit enter 4 When prompted press any key to continue with the LANAID setup program 4 Connecting to a Windows NT
Download Pdf Manuals
Related Search