Harbor Freight Tools 97320 User's Manual
Contents
1. STAINLESS STEEL ROLLING CABINET Kexel 1 97320 SET UP AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally Due to continuing improvements actual product may differ slightly from the product described herein Distributed exclusively by Harbor Freight Tools 3491 Mission Oaks Blvd Camarillo CA 93011 Visit our website at http www harborfreight com Read this material before using this product Failure to do so can result in serious injury SAVE THIS MANUAL Copyright 2007 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions or replacement parts please call 1 800 444 3353 SAVE THIS MANUAL Keep this manual for the safety warnings and precautions assembly operating inspection maintenance and cleaning procedures Write the product s serial number in the back of the manual near the assembly diagram or month and year of purchase if product has no number Keep this manual and the receipt in a safe and dry place for future reference WARNING Read all instructions Failure to follow all instructions listed below may result in serious injury SAVE THESE INSTRUCTIONS WORK AREA SAFETY 1 Keep children and bystanders away while operating Distractions can cause you to lose control 2 Keep work area cle2. manual as soon as possible OPERATING INSTRUCTIONS Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the A beginning of this manual including all text under subheadings therein before set up or use of this product le Load the Cabinet from the bottom up evenly distributing weight 2 Use the keys to lock the cabinet before moving it 3 Only use or move the cabinet on a smooth level surface capable of bearing the combined weight of the Cabinet tools loaded and the operator 4 To remove a drawer empty it and pull the drawer all the way out On each side of the back of the drawer there are small levers on the slider the lever on the left side must be pulled up and the lever on the right side pushed down to remove the drawer Holding the levers in position slide the drawer off the end of the slid ers 5 The drawer can be slid back onto the slider and closed with no extra operations 6 Clean then store the product indoors out of children s reach MAINTENANCE AND SERVICING Damaged products can fail causing personal injury Do ACAUTION not use a damaged product If abnormal noise or vibration occurs have the problem corrected before further use 1 BEFORE EACH USE inspect the general condition of the product Check for loose screws misalignment or binding of moving parts cracked or broken parts and any other condition that may affect its safe operation 2 PERIODICALLY clean external surfaces of the produc
3. an and well lit Cluttered or dark areas invite accidents PERSONAL SAFETY 1 Wear ANSl approved safety goggles NIOSH approved dust mask respira tor and heavy duty work gloves during use and service 2 Stay alert and use common sense when operating Do not use when tired or under the influence of drugs alcohol or medication 3 Do not overreach Keep proper footing and balance at all times This enables better control in unexpected situations 4 Dress properly Do not wear loose clothing or jewelry Keep your hair clothing and gloves away from moving parts Loose clothes jewelry or long hair can be caught in moving parts PRODUCT USE AND CARE 1 This product is not a toy Keep it out of reach of children 2 Use the correct product for your application The correct product will do the job better and safer at the rate for which it was designed Do not modify this product or use it for a purpose for which it is not intended 3 Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect the product s operation If damaged have the product repaired before use SKU 97320 For technical questions please call 1 800 444 3353 Page 2 oo Or gt go Use the product in accordance with these instructions and in the manner intend ed for the particular type of product taking into account the working conditions and the work to be performed Use of the product for operations different
4. from those intended could result in a hazardous situation SERVICE Have product serviced by a qualified repair person using only identical replace ment parts This will ensure that the safety of the product is maintained Maintain labels and nameplates on the product These carry important safety information If unreadable or missing contact Harbor Freight Tools for a replace ment MISCELLANEOUS Do not exceed the weight capacity of the drawers shelves or cabinet Be aware of dynamic loading Dropping or bouncing a heavy item may briefly create excess load causing product failure Depress the locks on all casters before use Do not open more than one drawer at a time Load the Cabinet evenly from the bottom up Do not step on drawers The warnings precautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator SAVE THESE INSTRUCTIONS SKU 97320 For technical questions please call 1 800 444 3353 Page 3 SPECIFICATIONS Drawers 95 Pounds Weight Capacity Top Shelf 500 Pounds Overall 1355 Pounds UNPACKING When unpacking check to make sure that the item is intact and undamaged If any parts are missing or broken please call Harbor Freight Tools at the number shown on the cover of this
5. rs or alterations outside our facilities criminal activity improper installation normal wear and tear or to lack of maintenance We shall in no event be liable for death injuries to persons or property or for incidental contingent special or consequential damages arising from the use of our product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation of exclusion may not apply to you THIS WARRANTY IS EXPRESS LY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS To take advantage of this warranty the product or part must be returned to us with transportation charges prepaid Proof of purchase date and an explanation of the complaint must accompany the merchandise If our inspection verifies the defect we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement We will return repaired products at our expense but if we determine there is no defect or that the defect resulted from causes not within the scope of our warranty then you must bear the cost of returning the product This warranty gives you specific legal rights and you may also have other rights which vary from state to state 3491 Mission Oaks Blvd PO Box 6009 Camarillo CA 93011 800 444 3353 Record Product s Serial Number Here No
6. t with clean moist cloth SKU 97320 For technical questions please call 1 800 444 3353 Page 4 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO PARTS LIST amp DIAGRAM Part Description aty B fome o o forwr fh e fowo p SKU 97320 For technical questions please call 1 800 444 3353 Page 5 LIMITED 90 DAY WARRANTY Harbor Freight Tools Co makes every effort to assure that its products meet high quality and durability standards and warrants to the original purchaser that this prod uct is free from defects in materials and workmanship for the period of 90 days from the date of purchase This warranty does not apply to damage due directly or indirectly to misuse abuse negligence or accidents repai
7. te If product has no serial number record month and year of purchase instead Note Some parts are listed and shown for illustration purposes only and are not avail able individually as replacement parts SKU 97320 For technical questions please call 1 800 444 3353 Page 6
Download Pdf Manuals
Related Search