Harbor Freight Tools 92942 User's Manual
Contents
1. A BIG TOP 20 FT 8 1 2 X 20 FT 6 TWO CAR CANOPY SET UP AND OPERATING INSTRUCTIONS Visit our website at http www harborfreight com Read this material before using this product Failure to do so can result in serious injury SAVE THIS MANUAL Copyright 2005 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools Diagrams within this manual may not be drawn proportionally Due to continuing improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included For technical questions or replacement parts please call 1 800 444 3353 Revised Manual 09k SAVE THIS MANUAL Keep this manual for the safety warnings and precautions assembly operating inspection maintenance and cleaning procedures Write the product s serial number in the back of the manual near the assembly diagram or month and year of purchase if product has no number Keep this manual and the receipt in a safe and dry place for future reference IMPORTANT SAFETY INFORMATION In this manual on the labeling and all other information provided with this product This is the safety alert symbol It is used to alert you to potential personal injury hazards Obey all safety messages that follow this symbol to2. avoid possible injury or death DANGER indicates A DANGER a hazardous situation which if not avoided will result in death or serious injury AWARNING WARNING indicates a hazardous situation which if not avoided could result in death or serious injury ACAUTION CAUTION used with the safety alert symbol indicates a hazardous situation which if not avoided could result in minor or moderate injury SKU 92942 CAUTION A NOTICE is used to address practices not related to personal injury CAUTION without the safety alert symbol is used to address practices not related to personal injury General Safety Rules WARNING Read all safety warnings and instructions Failure to follow the warnings and instructions may result in electric shock fire and or serious injury Save all warnings and instructions for future reference 1 Work area safety a Keep work area clean and well lit Cluttered or dark areas invite accidents Keep children and bystanders away while operating a power tool Distractions can cause you to lose control 2 Personal safety a For technical questions please call 1 800 444 3353 Stay alert watch what you are doing and use common sense when assembling Canopy Do not assemble while you are tired or under the influence of drugs alcohol or medication A moment of inattention may result in serious personal injury Use personal protective equipme
3. SED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO PARTS LIST Part Description Q ty Part Description Qty 1 Vertical Tube 68 6 8 3WayEndPiece 9 4 WayCenterPiece 3 11 Turnbuckle _ 8 12 Nylon Base _ J6 6 Swagged Tube With 2 Side Holes 60 aa Swagged Tube With 1 Side Hole 60 Swagged Tube Without Hole 60 6 Record Product s Serial Number Here Note If product has no serial number record month and year of purchase instead Note Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts SKU 92942 For technical questions please call 1 800 444 3353 Page 6
4. level and solid surface Figure D SKU 92942 For technical questions please call 1 800 444 3353 Page 5 USER MAINTENANCE Cleaning and Maintenance INSTRUCTIONS 1 BEFORE EACH USE inspect Procedures not specifically mie general Conder otis B 5 Canopy Check for loose hardware A explained in this manual must ae re i be performed only by a qualified misalignment or binding of moving parts tears in the tarp and any other condition that may affect its safe TO PREVENT operation DO NOT USE DAMAGED AWARNING SERIOUS INJURY EQUIPMENT FROM ACCIDENTAL OPERATION Do not use damaged equipment If the Canopy or one of its assembly parts is damaged have the problem corrected before further use technician 2 Keep Canopy free of oil grease liquids dirt and other debris Use only a mild detergent and damp cloth when cleaning Never use flammable or combustible liquids to clean the Canopy PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICEN
5. not use Canopy as a source of long term shelter SKU 92942 8 The warnings precautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator For technical questions please call 1 800 444 3353 SPECIFICATIONS Dimensions Pole Tubing 4 1 4 Diameter Connector Tar 14 x 14 mesh 1000 denier nylon p thread UNPACKING When unpacking make sure that the item is intact and undamaged If any parts are missing or broken please call Harbor Freight Tools at 1 800 444 3353 as soon as possible CAUTION Be alert to possible wind damage prolonged exposure to wind can cause fasteners and hardware to loosen as the frame flexes The Car Canopy s frame strength will be compromised if fasteners and hardware are not tight Periodically check and make sure all fasteners and hardware are tight Tubes stakes tie downs and rope should also be periodically checked to make sure the unit is always structurally rigid Page 3 ASSEMBLY DIAGRAMS AND INSTRUCTIONS SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product ALL PARTS BELOW REFER TO THE PARTS LIST SHOWN ON PAGE 6 WARNING To ensure safe a
6. nt Always wear eye protection Safety equipment such as dust mask non skid safety shoes hard hat or hearing protection used for appropriate conditions will reduce personal injuries Page 2 c Do not overreach Keep proper footing and balance at all times This enables better control of the assembly tools in unexpected Situations d Dress properly Do not wear loose clothing or jewelry Keep your hair clothing and gloves away from moving parts Loose clothes jewelry or long hair can be caught in moving parts during assembly Specific Safety Warnings 1 Do not attempt to assemble Canopy when high wind conditions exist as personal injury and or damage to the Canopy may result 2 Verify that Canopy is assembled and firmly secured using T stakes provided on a flat level surface to avoid accidents 3 Do not allow snow to accumulate on the Canopy the Canopy could collapse 4 CAUTION Heavy wet snow or extreme windy conditions could damage the Car Canopy It is recommended that the Tarp be removed under these conditions to prevent damage to the Car Canopy 5 Maintain Canopy with care Keep the Canopy clean dry and free of oil grease liquids and other debris 6 Maintain labels and nameplates on Canopy These carry important safety information If unreadable or missing contact Harbor Freight Tools for a replacement 7 Donotuse Canopy for any purpose other than for what it was intended Do
7. ssembly at least two people should assemble Car Canopy 1 Read the ENTIRE IMPORTANT 1 Connect the assorted Tubes and Swagged Tubes parts 2 3 4 5 Figure A 6 7 3 Way End Pieces part 8 and 4 Way Center Pieces part 9 together as shown in Figure A below The eight Turnbuckles part 11 are used to strengthen the frame assembly Attach the Turnbuckles to the frame assembly and tighten using a pair of pliers See Figure B next page WARNING Do not overtighten the Turnbuckles as bending to the frame assembly will occur Drape the Tarp over the assembled frame and secure the corners of the Tarp onto the frame by inserting the Tarp Ties part 10 through the metal eyelets of the Tarp and around the SKU 92942 For technical questions please call 1 800 444 3353 Page 4 framing Tubes as shown in Figures C Piece When complete do the same and D bottom to the other side See Figure C below 5 Once the corners are fastened attach SO the remaining Tarp Ties through the 7 Insert a Nylon Base part 12 not rest of the metal eyelets and onto the shown onto the bottom of each framing Tubes Vertical Tube 6 Lift one side of the roof and insert 8 Secure the Nylon Bases to the three Vertical Tubes part 1 into the ground using the T Stakes part 13 3 Way End Pieces and 4 Way Center not shown Figure B Tarp Ties 10 CAUTION The Car Canopy must be firmly secured on a flat
Download Pdf Manuals
Related Search