Harbor Freight Tools 91614 User's Manual
Contents
1. the unit BEFORE you begin assembly Technical Specifications Construction 20 Gauge Sheet Steel Welded 1 4 diameter Grid w nickel plated burners brass pressure valve and feed tube and valve adapter assembly BTU per Burner 8 000 Also Included 1 propane hose and valve adapter assembly Brass Socket Injector Fits 16 4 oz tank IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT Safety Warnings and Precautions WARNING When using product basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment 1 Keep children away Do not let children handle move or adjust the Propane Stove 2 Store idle equipment When not in use the Stove must be stored disconnected from the cylinder in a dry cool location to inhibit rust Always lock up the Propane Stove and Propane canister and keep out of reach of children 3 Check for damaged parts Before using any product any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function Check for any broken parts or mounting fixtures and any other condition that may affect proper operation Any part that is damaged should be properly repaired or replaced by a qualified technician Do not use the product if any knob does not turn On and Off properly 4 Replacement parts and accessories When servicing use only identical replacement parts Us2. T IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO SKU 91614 For technical questions please call 1 800 444 3353 Page 6
3. TWO BURNER PROPANE STOVE FOR YOUR SAFETY FOR YOUR SAFETY If you smell gas Do not store or use gasoline or other flam 2 mable vapors and liquids in the vicinity of this 1 Check that the bottle is tightly screwed to or any other appliance the regulator Shut off gas to the appliance Extinguish any open flame If odor continues properly dispose of the propane bottle and use another WARNING Improper installation adjustment alteration service or maintenance can cause injury or property damage Read the installa tion operating and maintenance instructions thoroughly before installing or servicing this WARNING For Outdoor Use Only equipment Distributed Exclusively by HARBOR A TOOLS 3491 Mission Oaks Blvd Camarillo CA 93011 Visit our Web site at http www harborfreight com Copyright 2004 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions and replacement parts please call 1 800 444 3353 THANK YOU for choosing a HARBOR FREIGHT TOOLS product For future reference please complete the owner s record below Model Serial No Purchase Date SAVE THE RECEIPT WARRANTY AND THESE INSTRUCTIONS It is important that you read the entire manual to become familiar with
4. e of any other parts will void the warranty Only use accessories intended for use with this product Approved accessories are available from Harbor Freight Tools 5 Do not operate if under the influence of alcohol or drugs Read warning labels if taking prescription medicine to determine if your judgment or reflexes are impaired while taking drugs lf there is any doubt do not operate the product 6 Maintenance For your safety service and maintenance should be performed regularly by a qualified technician Propane Stove Specific Safety Warnings 1 If the information provided in this manual is not followed exactly a fire or explosion may result causing property damage PERSONAL INJURY or DEATH 2 Improper assembly installation adjustment alteration service use or maintenance can cause property damage PERSONAL INJURY or DEATH Installation and repair should be done by a qualified service person The Propane Stove should be inspected before use and at least annually by a qualified service person SKU 91614 For technical questions please call 1 800 444 3353 Page 2 ZE 15 16 check the amount of fuel in the tank and wait 5 minutes for the gas to clear before 0 1 2 Frequent cleaning may be necessary It is imperative that the Fuel Inlet the burners and valves of the Stove be kept clean Carbon Monoxide Inhalation Hazard The Propane Stove must never be used indoors in a house or any other sealed structu
5. ignition are extinguished Remove the Tube and Valve Adapter 4 from the propane gas canister b Unscrew the Tube and Valve Adapter 4 from the Stove Slide the tabs on the Cover 1 out from each Side Shield 2 d Fold down each Side Shield 2 and fold down the Cover 1 Flip the Latches 6 around to the top so that they hold the Cover closed Unpacking When unpacking your Two Burner Propane Stove check to make sure the following parts are included If any parts are missing or broken please call HARBOR FREIGHT TOOLS at 1 800 444 3353 Part Description Quantity Part Description Quantity 1 Cover 1 Fuel Inlet Air Control 2 2 Side Shield 2 6 Latch 2 3 Grid 1 7 Burner and Fuel Jet Assembly 2 4 Tube and Valve Adapter 1 8 Burner Control Knob 2 Note Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts SKU 91614 For technical questions please call 1 800 444 3353 Page 5 Assembly Diagram 4 a 6 4 we 2 am oa A 7 5 D gt PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUC
6. o the Burner and Fuel Jet Assembly 7 Slightly turn the Burner Control Knob 8 7 Slightly turn the Burner Control Knob 8 counterclockwise for the Burner and Fuel Jet Assembly that 7 you wish to light Remove the match from the Burner and Fuel Jet Assembly 7 once the flame is ignited Increasing and Decreasing Heat Flame to Burner Assembly 1 Turning the Burner Control Knob 8 counterclockwise will increase the flow of gas to the Burner Assembly and Fuel Jet 7 This will increase the size of the flame 2 Turning the Burner Control Knob 8 clockwise will decrease the flow of gas to the Burner Assembly and Fuel Jet 7 This will decrease the size of the flame 3 To completely turn off the propane gas flow turn the Burner Control Knob 8 completely clockwise 4 lf the Fuel Jet 8 gets blocked it will need be serviced by a qualified technician before further use Only a qualified service technician should perform the following steps a Remove the Tube and Valve Adapter 4 b Disconnect the Burner and Fuel Jet Assembly 7 from the Stove c Clean it with a mild detergent d Reconnect the Burner and Fuel Jet Assembly 7 e Replace the Tube and Valve Adapter 4 Storing the Two Burner Propane Stove for Travel Before folding up your Propane Stove for travel make certain that it has completely cooled off after use a Make certain that all knobs are in the OFF position and all nearby flames and sources of
7. re Carbon monoxide is produced during operation and is DEADLY a closed environment Early signs of carbon Monoxide poisoning resemble the flu with headaches dizziness or nausea If you have these signs the heater may not be working properly or is improperly vented get fresh air immediately Risk of Fire and or Explosion Do not store extra propane tanks in the vicinity of the Propane Stove or any other appliance If gas is smelled during operation immediately turn the Burner Control Knob 8 to OFF and close the valve on the propane tank Propane gas is odorless An odor making agent is added to propane LP gas to enable you to smell the gas if it may be leaking lf the Propane Stove shuts off during operation turn the Control Knob to OFF restarting If it continues to shut off during operation have it serviced by a qualified technician Never place the Propane Stove within 10 feet of flammable objects such as wood trees overhangs and umbrellas Risk of Burns Propane Stove Gets Very Hot During Use Do not attempt to move the Propane Stove while it is in operation Turn it off and wait one half hour until it cools down before moving Do not touch the Burner and Fuel Jet Assembly while the Propane Stove is lit Before servicing wait one half hour for the Propane Stove to cool down Children and adults should be alerted to the hazards of high surface temperatures and should stay away to avoid burns or clothing ignition Yo
8. ung children should be carefully supervised when they are in the area of the Stove Clothing or other flammable materials should not be hung from the Stove or placed on or near the Stove Turn OFF the stove immediately and have a qualified technician check the stove if any of the following exists The smell of propane gas in conjunction with extreme yellow tipping of the burner flames The stove does not reach temperature The burner makes a popping noise during use A slight popping noise is normal when the burner is extinguished If the burner is not operating normally shut off the propane gas before checking to see if anything is obstructing the gas flow The lit burner should operate with a blue flame with a small yellow tip WARNING This product contains or when used produces a chemical known to the State of California to cause cancer and birth defects or other reproductive harm California Health amp Safety Code 25249 5 et seq This Stove must be used with an appropriate LP gas regulator included SKU 91614 For technical questions please call 1 800 444 3353 Page 3 Warning The warnings cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator Assembly and Operation Yo
9. ur Two Burner Propane Stove will require some simple assembly as described in the following steps To assist you with assembly and operation please refer to the Operational Figures as well as the Assembly Diagram and Parts List located on the last pages of this manual 1 2 5 Pull the Latches 6 up from the top and around to the bottom of the Stove see Figure 1 Make certain that the stove is on a flat level surface capable of supporting the weight of the Stove and the items to be heated Raise the Cover 1 then raise the Side Shields 2 on both sides of the Stove Insert the tabs on the Cover 1 through the hole in the side of the Side Shields 2 Raise each Side Shield 2 completely into place so that the tab locks into place at the end of the groove Burner and Fuel Jet Assembly 7 Side Shield 2 Burner Control Knob 8 Tube and Valve Adapter 4 Attach to propane canister not included Tube and Valve Adapter 4 Thread the Tube and Valve Adapter Assembly 4 onto the Stove see Figure 2 Tighten securely by hand or using a wrench Make certain that both the Burner Control Knobs 8 are in the OFF position before attaching the propane canister not included Attach the other end of the Tube and Valve Adapter 4 to the propane canister not included SKU 91614 For technical questions please call 1 800 444 3353 Page 4 6 To light the Burner and Fuel Jet Assembly 7 place a lit match next t
Download Pdf Manuals
Related Search