Harbor Freight Tools 66514 User's Manual
Contents
1. Page 3 9 to the top of the Output Tube 7 depending on what type of water dis play you desire See Figure 1 5 The Spray Nozzle 9 is threaded to the top of the Output Tube 7 when needed Available Accessories Attachments This Fountain Pump comes with three separate heads for different types of water spray a Bubbling Nozzle 6 features tiny holes that disperse water in all direc tions at once b Bell Nozzle 8 will shoot water straight up to a maximum height of 8 ft c Spray Nozzle 9 shoots many small streams of water in a tight pattern d All three spray heads thread onto and off of the top of the Output tube 7 for quick interchanging WARNING Always unplug the Fountain from the power outlet and put on a pair of heavy duty insulated rub ber gloves before sticking hands in water to change spray heads or any other handling of the Fountain Pump Power Supply 1 The pump is equipped with a ground ed plug according to regulations The pump is designed to be connected to 120 V 60 Hz receptacle 2 Make sure that the receptacle is suf ficiently secured and is in excellent condition SKU 66514 For technical questions please call 1 800 444 3353 3 When the plug is inserted into the receptacle the pump will be on WARNING If the power cord or plug is damaged do not use the pump The power cord or plug may only be re paired by a certified electrician Area of use This2. 25249 5 et seq The warnings precautions and in structions discussed in this instruction manual cannot cover all possible con ditions and situations that may occur It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator Fluid Type The Pump is designed for use with 2 Risk of electric shock This pump water with a maximum temperature of 77 has not been investigated for use in F 25 C Do not use the pump for other swimming pool areas fluids especially not fuels cleaning fluids 3 The electrical connections must be protected from moisture 4 If there is danger of flooding the or other chemical products SPECIFICATIONS electrical connections must be taken 15 4 GPM to higher ground Maximum Height 5 Circulation of caustic or explosive Elpclical Requiremems TAA VeL He fluids as well as the circulation of abrasive materials must be avoided at all costs 6 The pump must be protected from frost 7 The pump must be protected from running dry 8 Access by children should also be prevented with appropriate mea sures 9 WARNING Handling the Power Cord on this product will expose you to lead a chemical known to the State LISTED E197437 SKU 66514 For technical questions please call 1 800 444 3353 Page 2 UNPACKING When unpacking check to make sure that the item is intact and un
3. anty the product or part must be returned to us with transportation charges prepaid Proof of purchase date and an explanation of the com plaint must accompany the merchandise If our inspection verifies the defect we will ei ther repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement We will return re paired products at our expense but if we determine there is no defect or that the defect resulted from causes not within the scope of our warranty then you must bear the cost of returning the product This warranty gives you specific legal rights and you may also have other rights which vary from state to state 3491 Mission Oaks Blvd PO Box 6009 Camarillo CA 93011 800 444 3353 SKU 66514 For technical questions please call 1 800 444 3353 Page 8
4. d PACIFIC HYDROSTAR 120W FOUNTAIN PUMP SET UP OPERATING AND MAINTENANCE INSTRUCTIONS il Distributed exclusively by Harbor Freight Tools 3491 Mission Oaks Blvd Camarillo CA 93011 Visit our website at http www harborfreight com Read this material before using this product Failure to do so can result in serious injury SAVE THIS MANUAL Copyright 2008 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools Diagrams within this manual may not be drawn proportionally Due to continuing improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included For technical questions or replacement parts please call 1 800 444 3353 CAUTION This pump has been evaluated for use with water only AWARNING 10 IMPORTANT For your own safety before starting to run the pump please have the following items checked by an expert 1 Risk of electric shock This pump is supplied with a grounding conductor and grounding type attachment plug To reduce the risk of electric shock connect only to a properly grounded grounding type receptacle of California to cause cancer and birth defects or other reproductive harm Wash hands after handling California Health amp Safety Code
5. d and shown for illustration purposes only and are not avail able individually as replacement parts LIMITED 1 YEAR 90 DAY WARRANTY Harbor Freight Tools Co makes every effort to assure that its products meet high quality and durability standards and warrants to the original purchaser that for a period of ninety days from date of purchase that the engine motor the belts if so equipped and the blades if so equipped are free of defects in materials and workmanship Har bor Freight Tools also warrants to the original purchaser for a period of one year from date of purchase that all other parts and components of the product are free from defects in materials and workmanship 90 days if used by a professional contractor or if used as rental equipment This warranty does not apply to damage due directly or indirectly to misuse abuse negligence or accidents repairs or alterations outside our facilities normal wear and tear or to lack of maintenance We shall in no event be liable for death injuries to persons or property or for incidental contingent special or con sequential damages arising from the use of our product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation of exclusion may not apply to you THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS To take advantage of this warr
6. damaged If any parts are missing or broken please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible A INSTALLATION Read the ENTIRE IMPORTANT SAFETY INSTRUCTIONS section at the beginning of this manual including all text under subheadings therein before set up or use of this product TO PREVENT AWARNING SERIOUS INJURY FROM ACCIDENTAL OPERATION Unplug the Fountain Pump from its electrical outlet before assembling inspecting making any adjustments or servicing Note For additional information regarding the parts listed in the following pages refer to the Assembly Diagram near the end of this manual SKU 66514 For technical questions please call 1 800 444 3353 Figure 1 Spray Nozzle SS Output Tube 7 Tee Fitting System 10 Coupling Nut 5 N Main Housing 4 1 Thread the Coupling Nut 5 to the Main Housing 4 2 Thread the Tee Fitting System 10 to the top of the Coupling Nut 5 NOTE There are two ON OFF Switches on the Tee Fitting System 10 Turning either Switch 90 changes it from OFF to ON or ON to OFF Stamped onto the Fountain Pump parts are PLUS MINUS symbols showing either open or closed See Figure 2 Figure 2 OFF position ON position 3 Thread the Output Tube 7 to the top of the Tee Fitting System 10 4 Thread the Bell Nozzle 8 the Bub bling Nozzle 6 or the Spray Nozzle
7. eplace into the Plastic Filter 13 and reassemble the Filter Cover 14 When not using the Fountain Pump as in the Winter months protect and preserve the Filter Sponge by keep ing it in a glass jar in water stored near the Fountain Pump for easy location Cleaning the Impeller 1 Unscrew the Back Cover 3 twist it 1 4 turn to left and pull Remove the Impeller 11 See Figure 3 NOTE There is a small Metal Washer attached to the rear of the Impel ler Shaft Be careful not to lose it when removing cleaning and replacing the Impeller 2 Flush with lots of lukewarm clean water to remove built up debris Use of a small medium stiff toothbrush is helpful SKU 66514 For technical questions please call 1 800 444 3353 Figure 3 Back Cover 3 Impeller 11 Metal Washer Replace the Impeller 11 as in num ber 1 of this section using reverse procedure Check for Metal Washer before replacing the Back Cover 3 Page 6 Troubleshooting Possible Causes Likely Solutions Fountain Pump will not 1 No power at outlet Check power at outlet Circuit breaker tripped Check circuit breaker for outlet Cord not connected Check that cord is plugged in Low flow from Possible clogging of Filter Sponge Check and clean the Filter Sponge Nozzle s per instructions in Maintenance Section on Page 8 Possible excess debris lodged in Check and clean debris from Impeller Impelle
8. pump is designed for use as a fountain pump in an area not used for swimming Page 4 OPERATING INSTRUCTIONS Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product A 1 After reading these instructions consider the following points before starting the pump a Verify that the pump rests on the floor of the fountain b Verify that the electrical connection is 120 V 60 Hz c Verify that the electrical receptacle is in good condition d Verify that water and moisture can not get near the power supply recep tacle e Verify that the pump is installed so as to prevent running dry 2 To prevent tripping run any extension cord used away from walkways that lead to your location 4 Place the Fountain Pump on a sur face slightly elevated to prevent col lection of excessive mud and open either or both switches located on the Tee Fitting System 10 by rotating them towards the symbol 5 Plug the Fountain Pump into the power outlet The Fountain Pump will begin operating automatically 6 When not using the Fountain Pump for a long period of time unplug the power cord remove it from the water rinse with cold clean water and let it dry before storing it inside away from children SKU 66514 For technical questions please call 1 800 444 3353 MAINTENANCE AND SERVICING Proced
9. r per instructions on Page 8 Possibly the two Switches located Check both Switches Turn both on the Tee Fitting System are only fully towards the symbol of the open partially ON bicycle lock Follow all safety precautions whenever diagnosing or servicing the appliance Disconnect power supply before service PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO __ PARTS LIST AND ASSEMBLY DIAGRAM gt Description _ Q ty 6 BubblingNozle 7 8 BelNoze fr 9 Spray Nozze f7 SKU 66514 For technical questions please call 1 800 444 3353 Page 7 Record Product s Serial Number Here Note If product has no serial number record month and year of purchase instead Note Some parts are liste
10. ures not specifically explained in this manual must be performed only by a qualified technician TO PREVENT AWARNING SERIOUS INJURY FROM ACCIDENTAL OPERATION OR ELECTRIC SHOCK Unplug the Fountain Pump from its electrical outlet before performing any accessory change inspection maintenance and or cleaning procedures TO PREVENT SERIOUS INJURY FROM TOOL FAILURE Do not use damaged equipment If abnormal noise or vibration occurs have the problem corrected before further use Cleaning Maintenance and Lubrication 1 BEFORE EACH USE inspect the general condition of the Fountain Pump Check for loose screws mis alignment or binding of moving parts cracked or broken parts damaged electrical wiring and any other condi tion that may affect its safe operation 2 AFTER USE clean external surfaces of the appliance with clean moist cloth Page 5 WARNING If the supply cord of this appli ance is damaged it must be replaced only by a qualified service technician Cleaning the Filter Sponge 1 Wash the Filter Sponge out regu larly especially if the Fountain Pump power starts to drop Unplug the Fountain Pump from the power source and wear heavy duty insulated rubber gloves before putting your hands into the water Press the sides of the Filter Cover 14 together and pull it off the Main Housing 4 Pull the Filter Sponge out of the Plastic Filter 13 and rinse with cold clean water R
Download Pdf Manuals
Related Search