Harbor Freight Tools 40129 User's Manual
Contents
1. Pin in place use Assembly Order shown in Figure F placing Washer on outer side of axle support then Large Spring Washer Large Wheel 4 Washer and finally Wheel Hub Tap on Hub to hold Wheel securely in place With pliers bend both ends of the Cotter Pins so it does not slip out of place On the opposite side repeat instructions 3 Next to the axle support place Washer to outside of axle support Large Spring Washer Large Wheel 4 Washer and finally Wheel Hub Tap to secure Bend both ends of Cotter Pins Left Side Assembly Order SKU 40129 PAGE 3 ASSEMBLY INSTRUCTIONS FOR FRONT WHEELS 5 To assemble the Front Axle Flip Cart around so handle is in back Using the Short Axle 3 and using the Assembly Order put Cotter Pin in hole Washer Small Spring Washer Small Wheel 5 and last Washer Do the same on the opposite end of the Small Axle 3 See Figure G With both wheels in place put axle into front frame holes of Cart See Figure H Figure G Figure H 6 With pliers bend the ends of the Cotter Pins Recheck to see all the Cotter Pins are crimped to prevent slipping out Check Cotter Pins each time you use your cart to prevent losing a wheel This Cart is for operating on a smooth flat terrain 7 The Four Wheel Cart can be folded up for storage and held in place by a Latch on back of the Cart See Figure l Latch Figure SKU 40129 PAGE 4 PARTS LIST PART DESCRIPTION Q2. 4 WHEEL CART Mtni3 40129 ASSEMBLY INSTRUCTIONS Distributed Exclusively by Da TOOLS 3491 Mission Oaks Blvd Camarillo CA 93011 Visit our Web site at http www harborfreight com Copyright 2003 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions please call 1 800 444 3353 02 03 SPECIFICATIONS ITEM DESCRIPTION 38 3 8 Tall X 20 5 8 Deep X 21 Wide Closed Dimensions 43 Tall X10 1 8 Deep X 21 Wide 8 Gauge Wire Large Front Wheel Diameter 13 16 Wide X 6 Diameter 1 1 16 X 9 7 8 Dia 5 3 4 Dia X 7 8 Wide 14 Lbs Red Enamel Coated Alloy Steel Note Maximum weight capacity 75 Lbs Do not exceed this maximum capacity SAVE THIS MANUAL You will need the manual for the safety warnings and precautions assembly instructions operating and maintenance procedures parts list and diagram Keep your invoice with this manual Write the invoice number on the inside of the front cover Keep the manual and invoice in a safe and dry place for future reference SAFETY WARNINGS AND PRECAUTIONS 1 KEEP PRODUCT USAGE AREA CLEAN Cluttered areas invite injuries 2 KEEP CHILDREN AWAY FROM PRODUCT USAGE AREA Allow children to handle this product only with supervision 3 CHECK FOR DAMAGED PARTS Before using th
3. TY Cart Long Axle Short Axle Large Wheel Small Wheel Hardware Packet contents include Cotter Pins Large Springs Small Springs Washers Wheel Hubs MAINTENANCE 1 For better and safer performance keep all parts of this product clean and dry 2 Periodically check to see that all hardware is in place PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACE MENT PARTS THERETO SKU 40129 PAGE 4
4. is product carefully check that it will operate properly and perform its intended function Check for damaged parts and any other conditions that may affect its operation Replace or repair damaged or worn parts immediately 4 REPLACEMENT PARTS AND ACCESSORIES Use only identical replacement parts 5 WEAR SAFETY GOGGLES Must comply with ANSI at all times when assembling 6 AVOID SHARP EDGES WHEN ASSEMBLING T DO NOT ALLOW CHILDREN TO STAND UPON OR CLIMB INTO CART SUFFICATION DANGER Plastic shipping bag could cause suffication if children are allowed to play with bag 8 SHOULD NOT BE USED TO TRANSPORT PEOPLE OR PETS Use Four Wheel Cart on flat level surfaces only SKU 40129 PAGE 2 ASSEMBLY INSTRUCTIONS FOR BACK WHEELS Remove the plastic bag from the Four Wheel Cart See Figure A Cut all the tie straps holding component parts Open Cart 1 and organize parts for assembly See Figure B amp C 4 Figure A Figure B Figure C Turn Cart around and on the handle side slip the Longer Axle 2 Figure C through the right and left axle support on lower back frame matching up the small holes in the Longer Axle 2 and axle support Place Cotter Pin through holes to secure the Longer Axle See Figure D amp E Figure D Figure E Figure F axle matchup small Assembly Order 6 Hardware Packet support for Cotter Pins 1 Cotter Pin 5 Wheel 2 Washer 6 Washer 3 Spring 7 Wheel Hub 4 Washer With Cotter
Download Pdf Manuals
Related Search