Home
GoVideo DDV3110 User's Manual
Contents
1. HEAT The product should be situated away from heat Sources such as radiators heat registers stoves or other products including amplifiers that produce heat Dual Deck VCR User s Guide GETTING STARTED This Chapter will guide you through initial setup of your Dual Deck VCR including basic connections Auto Setup and remote programming Before you begin please check that all items are C included in your Dual Deck VCR box then insert the enclosed batteries in the remote control Z 1 CHECK PACKING LIST U yee vse uso T bech GO VIbEO s rm Q zum Dual Deck VCR P See Remote Control C e P a 9999 9 oc Ss 9 Two 2 AA Batteries EE 209 Coaxial Cable 895 e User s Guide Warranty Registration Card Z 2 INSERT BATTERIES a Remove the battery cover from the back of the remote control as shown b Insert two AA batteries paying attention to observe the correct polarities c Replace the cover 1 Getting Started 1 BASIC CONNECTIONS NOTES Follow these steps to connect the Dual Deck VCR to your television and antenna cable TV From Antenna or Cable TV IN FROM ANT OUT TO TV To Television CONNECT ANTENNA CABLE TV Connect the coaxial cable from your indoor outdoor antenna or cable TV outlet cable box to the IN FROM ANT jack on the VCR back pane
2. cicer i licere ade Reset Factory Setting APPENDIX C HELP 43 Troubleshooting mter tiens Technical Specifications sse Waan E INDEX 47 IMPORTANT SAFETY INSTRUCTIONS READ INSTRUCTIONS All the safety and operating instructions should be read before the product is operated RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference HEED WARNINGS All warnings on the product and in the operating instructions should be adhered to FOLLOW INSTRUCTIONS All operating and use instructions should be followed CLEANING Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning ATTACHMENTS Do not use attachments not recommended by the product manufacturer as they may cause hazards WATER AND MOISTURE Do not use this product near water for example near a bathtub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like ACCESSORIES Do not place this product on an unstable cart stand tripod bracket ortable The product may fall causing serious injury to a child or adult and serious damage to the product Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the product Any mounting of the product should follow the manufacturer s instructions and should use a mounting accessory hes recommended
3. 4 Y Move Sel MENU Quit PLAYBACK SETTINGS 1 Deck 1 Hi Fi 2 Deck 2 Hi Fi 3 Dual Playback 4 Auto Play Rewind 5 23 COMMERCIAL ADVANCE biss Move gt Sel MENU Quit COMMERCIAL ADVANCE 13 Mark Commercials 2 Skip Commercials 3 Background V Move gt Sel MENU Quit 1 OPEN MAIN MENU Press MENU SELECT PLAYBACK SETTINGS Press 2 SELECT COMMERCIAL ADVANCE Press 5 SET COMMERCIAL ADVANCE Press 1 to select from the following 1 Mark Commercials Yes The VCR will automatically mark commercials during recording No The VCR will not mark commercials during recording INSERT TAPE Insert a videotape in Deck 1 COMMERCIAL ADVANCE only works in Deck 1 RECORD FROM TV Record a television show using one of the three basic methods Basic Recording see page 14 One Touch Recording see page 14 Timer Recording see page 16 END RECORDING Press STOP mz on Deck 1 or allow the preset recording time to run out e g One Touch Recording and Timer Recording have preset recording times AN RAAM Tel WWII NOTE e COMMERCIALADV ANCE isatrademarkofSR T Inc AJer rylggulden invention licensed in association with Arthur D Little Enterprises Inc 8 COMMERCIAL ADVANCE The VCR will begin marking in 59 seconds MARKING COMMERCIALS NOTES CONFIRM OR CANCEL When recording is stopped the VCR will alert you that Th
4. 5 Manual CA Playback V Move Sel MENU Quit DECK ONE INDEX MENU Index Scan Press FF or REW Search 1 99 Then FF REW MENU to Quit J TO EN TO SEARCH press 01 99 M press FF or REWIND then press FF or REWIND N fe INSERT TAPE Insert a videotape in Deck 1 or Deck 2 fthe tape has a record safety tab you will see the menu at left e Ifthe tape is missing the record safety tab please see MOVIE ADVANCE on page 30 OPEN SEARCH MENU While the tape is stopped or playing press SEARCH INDEX SELECT INDEX SEARCH SCAN Press 1 SEARCH SCAN FOR INDEX MARKS Choose one of the following Scan Press FAST FO RWARD ve or REWIND to begin scanning for Index Marks forwards or backwards When Index Scan locates an Index M ark it will play the tape for 5 seconds If it is the scene you want to watch press PLAY If itis not the VCR will automatically search for the next Index Mark Search DECK ONE FORWARD SCAN DECK ONE FORWARD SCAN Enter a number from 1 to 99 e g for 5 press 0 DECK ONE REVERSE SCAN DECK ONE REVERSE SCAN 5 Then press FAST FORWARD or REWIND to begin searching forward or backward for the specified Index Mark When the VCR locates the Index Mark it will play the tape Auto Show Finder Use Index Scan with the Date Time Stamp to quickly find T
5. GO VIDEO UAL ECK VCR DUAL D 4 Head Hi Fi x 4 Head Hi Fi Jog Shuttle Remote es Auto Head Cleaner GV 3110 061703 COMMERCIAL gt gt ADVAINCE MOVIE ADVANCE COMMERCIAL FREE COPY WELCOME Congratulations 0n your purchase of this Go Video Dual Deck VCR We know you will enjoy this product for many years to come In case warranty service is required please take a moment to attach your receipt to this manual and write down your Serial Number located on the back panel of the VCR About this Manual This manual has been designed to acquaint you with all the features and functionality of the Dual Deck VCR The first two chapters cover basic setup and a quick tour of the components of the Dual Deck system Chapters 3 9 present in detail each major Dual Deck function from playing tapes to Commercial Free Copy so you can jump in anywhere that interests you The three Appendices cover advanced connections manual setup and help respectively For your reference a Menu Tree is also included on the inside back cover Enjoy the Dual Deck experience CAUTION To prevent fire shock hazard or annoying interference use only the recommended accessories To prevent electric shock do notuse this po larized plug with an extension cord recep tacle or other outlet unless the blades can be fully inserted to prevent blade exposure To reduce the risk of electric shock do not remove the u
6. matically Tape counters not moving To display tape counters the VCR requires control track which is only present on prerecorded tapes No menu or On Screen Displays Tape may be blank snow appears on screen If so menus and O n Screen Display cannot be shown Stop tape or record on tape to enable displays Remote may be set to control TV and not VCR Press VCR key to reactivate it Date Time Stamp may be set to Cont Continuous with recording in progress Press STOP ma on recording deck to restore normal on screen functions see page 15 TV shows blue screen TROUBLESHOOTING If current channel is too weak to display clear picture VCR will display blue screen To show weak channels see page 40 Double check antenna connections or tuner settings Front panel display blinking VCR is in Auto Power Off mode If you press POWER while rewinding copying Timer Recording O ne Touch Recording or EZ Copying VCR will automatically turn off when the given function is complete Press POWER to toggle Auto Power on and off Copy blinking on front panel display Indicates deck is paused while copying tape No stereo sound Connect TV and VCR with RCA line cables If your TV and VCR are connected with an RF coaxial cable you will only hear stereo sound if VCR is turned off No sound on Timer Recording e Record source was accidentally set to Ch s Simulcast Selec
7. Play Rewind etc 2 TV VCR INDICATOR Lights when the Dual Deck is in VCR mode turns off when the Dual Deck is in TV mode as set by the TV VCR key FRONT PANEL DISPLAY 3 TIMER INDICATOR Lights to show you that a Timer Recording has been programmed and stored in memory Blinks if there is a Timer Recording error 4 COPY INDICATOR Lights to show you that a tape is being copied 5 SAP INDICATOR Lights when a Second Audio Program usually a second lan guage is available for the current TV channel 6 Hi Fi INDICATOR Lights when a tape is playing a Hi Fi stereo soundtrack 7 STEREO INDICATOR Lights when the channel you are watching is broadcast in stereo 10 11 12 UTD Ferd display 1 H 3 4 5 6 7 8 a as E a ae DECK 1 VCR TIMER COPY SAP Hi Fi STEREO DECK 2 Cocco SLP C AM lt gt 11 12 DECK 2 STATUS INDICATOR Lights to show you that Deck 2 is active Also graphically displays the status of the tape in Deck 2 e g Stop Play Rewind etc DECK 1 PLAY RECORD SPEED Shows you the current playback SP LP or SLP or record speed SP or SLP for Deck 1 TAPE COUNTER Shows you the current time the tape counter position or the time remaining until the end of the tape in the active deck as set by the CLK CTR key Also briefly displays the status of the active deck when you press a deck control key e g STOP m PLAY REWIND etc AM PM INDICATOR Light
8. appear on your television screen Please proceed with Auto Setup on the follow ing page ForAdvanced Connections please refer to pages 31 35 Dual Deck VCR User s Guide Follow these steps to run Auto Setup which will set the clock and save local channels automatically POWER LANGUAGE LANGUE 1 2 English 2 Fran ais Select 1 2 Choisir 1 2 Connect Antenna or Cable and Press MENU Searching For Channels Please Wait SS SSS Setting the Clock Please Wait po NOTES SET MENU LANGUAGE The first time you turn on your Dual Deck VCR you will be prompted to set the menu language Press 1 for English or 2 for French CONFIRM ANTENNA CABLE CONNECTION If you have not already done so make sure you have connected an antenna or basic cable to the IN FROM ANT jack on the VCR back panel Press MENU to continue RUN AUTO SETUP As soon as you press MENU the Dual Deck VCR will automatically perform the follow ing steps Auto Channel Search Automatically detects the source of incoming channels antenna or cable and then searches for all active channels in your area Auto Clock Set Automatically sets the VCR s internal clock which is necessary for accurate timer recording This procedure may take a few minutes to complete When finished the VCR will display the lowest channel found Please proceed with Chapter 2 fora Quick Tour of the Dual Deck syste
9. frequent dark and quiet scenes AIDIVAAV Id HONVACGV I1VIVOAYAWWOD COMMERCIAL ADVANCE Override To temporarily override automatic skipping of commercials press STOP ms while the VCR is fast forwarding through a group of commercials Press REWIND to position the tape before the commercial group then press PLAY This time when the commercial group begins it will NOT be skipped Automatic skipping will resume after the VCR reaches the end of a commercial group 8 COMMERCIAL ADVANCE Follow these steps to remove all marked commercials while making a copy of a taped TV show 1 OPEN MAIN MENU press Press MENU SELECT COPY SETTINGS Press 1 1 gt Copy Settings SEE SSe SET COMM FREE COPY Record Edit Settings Channel Settings Press 1 to select from the following VCR Settings Timer Recording On The VCR will exclude marked commer Language Langue cials while copying tapes Ni Move Sel MENU Quit e Off The VCR will include marked commer cials while copying tapes e Auto The VCR will automatically make a copy of each TV program you record without the marked commercials see note below os INSERT SOURCE TAPE 12 Comm Free Copy 2 EZCopy Insert the tape with marked commercials in 3 Speed Matching Deck 1 4 Copy Audio Insert INSERT THE TARGET TAPE Insert the tape you are copying to in Deck 2 V Move gt Sel MENU Quit COPY YOUR TAPE Press CO PY TAPE
10. then Time Zone and Clock Set Channel will not appear on the Clock Settings menu e If you are an Arizona resident set Daylight Savings to Off and set Time Zone to Mountain see page 37 Appendix B Custom Settings 1 Copy Settings 2 Playback Settings 3 Record Edit Settings 4 Channel Settings 5 VCR Settings 6 Timer Recording 7 Language Langue MENU Quit M E AES Y o EE CHANNEL SETTINGS Ch05 gt Channel Source Auto Channel Search Add Channel Show Weak Channels No Channel Audio Stereo CHANNEL SETTINGS Ch Up Dn or 0 9 For Chan Fi Move gt Sel MENU Quit press gt for Channel Source Auto Channel Search Add Remove Channel Show Weak Channels Channel Audio NOTES Use TV SAP to listen to a second lan guage with headphones while the primary language is played through your TV speakers Use Simulcast to enjoy programs broad cast simultaneously via television and FM radio al Follow these steps to set all Channel Settings for your Dual Deck VCR including Channel Source Add Remove Channel Show Weak Channels and Channel Audio OPEN MAIN MENU Press MENU SELECT CHANNEL SETTINGS Press 4 ADJUST CHANNEL SETTINGS Use the arrow keys to select and set each of the following Channel Source Auto Automatically detects whether you are receiving channels from antenna or cable Antenna Specifies that you a
11. Output jack on the Cable Box to the Antenna In connection on the back of the TV screen Please proceed with Auto Setup on page 3 NOTES To view cable box channels set the TV VCR switch to TV To watch the DVD VCR through the RF output set the TV VCR switch to VCR and tune channel 3 or 4 on the cable box With this hookup you can watch scrambled channels but you will not be able to record them Dual Deck VCR Users Guide Follow these steps to label the font and rear A V inputs e g if you have a DVD Player connected to the ear line inputs you can change the label fiom Line 2 to DVD throughout the menu system press 1 Copy Settings 2 Playback Settings 3 Record Edit Settings 4 Channel Settings 3 5 Vie Settings 6 Timer Recording 7 Language Langue 4 Move gt Sel MENU Quit VCR SETTINGS Child Lock Remote Eject Panel Display Screen Display RF Output Channel Clock Settings 7 Advanced Settings Nv 2Move gt Sel MENU Quit ADVANCED SETTINGS 1 Reset Factory Settings 5 22 Front A V Input 3 Rear A V Input ik Move s Sei MENU Quit OPEN MAIN MENU Press MENU SELECT VCR SETTINGS Press 5 SELECT ADVANCED SETTINGS Press 7 SET FRONT A V INPUT Press 2 to label the Front A V Input to one of the following Linel Line 1 default e Vid1 Video 1 SAT Satellite Receiver LD Laserdisc Player DVD Digital Video Disc
12. Position 9 Customer Service 43 D Date and Time 9 Date Time Stamp 15 28 Daylight Savings Time 39 Deck 1 key 5 Deck 1 Status indicator 8 Deck 2 key 5 Deck 2 Status indicator 8 Deck Select key 7 Direct Time Search 29 Display key 5 9 Dual Playback 13 Dual Recording 15 DVD Player 33 E Editing Automatic 19 Editing Manual 20 English 36 Event Frequency 17 Event Number 16 Event Summary 18 EZ Copy 11 20 F Factory Settings Reset 42 Fast Forward key 5 7 Find Next Preview 30 Find Start of Movie 30 Frame Advance 12 Freeze 12 French 36 Front Line Inputs 35 During Copy Audio Insert 21 Front Panel 7 Front Panel Display 8 H Help 43 Hi Fi Deck 1 13 Hi Fi Deck 2 13 Hi Fi indicator 8 Index Marks Automatic 27 Defined 27 Manual 27 Initial Setup 1 J Jet Search 12 Jog wheel 5 L Language Settings 3 36 Laser Disc Player 33 LCV key 6 Line 1 Input 7 Line 2 Input 33 Line Input Labeling 7 35 Loop Playback 13 Loop Recording 15 LP 8 M Manual CA Playback 29 Menu key 6 7 Monitor Hookup 32 Mono 40 Mute key 6 O On Screen Display OSD 9 One Touch Recording 14 OTR 14 OTR Loop Record 14 Overlapping Events 18 O verriding Preview Skip 29 30 P Packing List 1 Panel Display 41 Picture Search 12 Play key 6 7 Playback Basic 12 XdJGQONI Index INDEX Playback Settings 13 Power key 6 7 R Rear A V Input 33 35 Record key 6 7 Record Safety Tab
13. Press 2 3 4 or 5 to select one of the following 2 Blank Search Searches for the next available blank unrecorded segment on your tape This makes it easy to find available space when recording TV shows or editing tapes Ifthe VCR finds blank tape it will stop Ifthe VCR does not find blank tape it will eject the tape 3 Direct Time Search Locates a specific tape counter position in hours minutes and seconds This is useful for editing purposes e g you can advance the tape directly to the beginning of the desired scene Press 1 for positive or 2 for negative counter values Use the 0 9 keys to enter the desired time in hours minutes and seconds Press CLEAR if you need to back up and re enter a number Press SEARCH IN DEX to advance the tape to the specified time 4 Return to 0 00 00 Advances your videotape to tape counter position 0 00 00 This is useful when editing from a baseline counter value of 0 00 00 When selected the VCR will automati cally rewind or fast forward the tape to counter position 0 00 00 5 Manual CA Playback See sidebar at left SNOILdO HOAVAS TIVIVOAdS 9 Search MOVIE gt gt ADVANCE Follow these steps to enjoy MOVIE ADVANCE a handy feature that automatically finds the beginning of the movie on most rented and purchased video tapes You can also use MOVIE ADVANCE to selectively watch or skip the previews SEARCH press woe SEAR
14. Stereo Auxiliary Inputs OR I IN LINE OUT FROM ANT OLO z e Z O STEREO CONNECTION UI 1 CONNECT VCR TO STEREO cC Connect RCA cables from the Line Out audio jacks R and L on the back LLI of the VCR to the line inputs on your stereo receiver V 2 SET STEREO TO AUXILIARY MODE Set your stereo receiver to Aux or Line refer to your stereo owner s guide for the proper setting NOTES A monitor TV is not the same as a computer monitor Make sure that Deck 1 Hi Fi and Deck 2 Hi Fi are turned on in the menu system see page 13 With this connection the TV VCR button on the front panel has no effect It is asif the TV VCR button were always set to VCR Dual Deck VCR Users Guide Follow these steps to connect your Dual Deck VCR to an external audio video component such as an additional VCR laser disc player DVD player camcorder satellite receiver video game etc 1 Connect to Audio Video outputs of External Device CONNECT DEVICE TO VCR Connect RCA cables from the audio video outputs of your external device to the audio video inputs on the front or back of the VCR EXTERNAL DEVICE OPTIONS Once you have connected an external device to your Dual Deck VCR you can perform the following functions Watch Device Press TV VIEW until playback from Line 1 front panel inputs or Line 2 rear panel inputs appears on your TV screen Record Device Press TV VIEW until playb
15. TRE RENE TV 03 Telefunke DEE TV 26 Ile Ise can ean TV 4 09 Zenith ES TV 17 CHECK YOUR RESULTS If the television advances to the next active channel programming is complete If the television does not respond try another 2 digit code Some televisions are not listed but can be programmed OPERATE YOUR TELEVISION When you want to control your television press the TV key then try any of the keys shown in the drawing at left When the remote control is in TV mode it WILL NOT operate your VCR To restore VCR mode press the VCR key Dual Deck VCR User s Guide This Chapter provides an overview of the Remote Control Front Panel Front Panel Display and On Screen Display The following is an overview of the Dual Deck VCR remote control The keys are listed in alphabetical order 0 9 While watching TV press to select channels While in the menu system press to select menu items 100 Press to select cable channels 100 and above CH AY Press to select the next or previous channel COPY TAPE Press to copy the tape in Deck 1 to the tape in Deck 2 see page 10 CLEAR po Press to reset the Tape Counter to zero 0 00 00 Also press to clear entries in the menu system CLK CTR Press to change the Front Panel Display to the clock tape counter ortime remaining on the tape lOH LNOO ALOWSAY DECK 1 Press to make Deck 1 active All deck control keys PLAY RE
16. Thetape in Deck 1 will begin copying to Deck 2 Deck 2 will suspend recording whenever Deck 1 locates a block of commercials When copying is complete the tape in Deck 2 will be commercial free COMMERCIAL FREE COPY ASTE OREGIONMBIMSETRIGIPASINSESENESESEGIORDAY When Comm Free Copy is set to Auto each time a TV program finishes recording and marking commercials in Deck 1 the VCR will automatically rewind Deck 1 to the start of the recording and copy the program to Deck 2 without the marked commercials How it Works 1 Load a videotape with a record safety tab into each Deck 2 Record a TV program in Deck 1 standard recording One Touch recording or timer recording 3 When recording is stopped in Deck 1 or when the recording time has elapsed the VCR will auto matically rewind the tape in Deck 1 to the start of the recording and mark all commercial groups 4 Next Deck 1 will rewind again and copy the program to Deck 2 leaving out the marked commercials When Auto Commercial Free Copy is complete both decks will stop at the end of the recorded program ready to record additional programs NOTES The Commercial Free Copyfunction willonlyr ecognize commer cial groupsthathave been marked by COMMERCIALADV ANCE e Auto Commer cial Free Copy will be disabled ifther eisa T imerevent scheduled on Deck 2 Dual Deck VCR User s Guide This Chapter will show you how to locate recordings on your videot
17. an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode See figure above LIGHTNING For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power lines surges POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal OVERLOADING Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock OBJECT AND LIQUID ENTRY Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could NE SECTION 810 20 GROUNDING CONDUCTORS result in a fire or electric shock Never spill liquid of any kind on the product SERVICING Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all
18. by the manufacturer A product and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the product and cart combination to overturn PORTABLE CART WARNING Symbol provided by RET AC VENTILATION Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating and these openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to POWER SOURCES This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consult your product dealer or local power company For products intended to operate from battery power or other sources refer to the operating instructions GROUNDING OR POLARIZATION This product may be equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to
19. in Deck 1 INSERT TARGET TAPE Insert your target tape in Deck 2 Make sure the tape has a record safety tab For best quality use blank or pre formatted tapes OPEN MAIN MENU Press MENU SELECT RECORD EDIT SETTINGS Press 3 SELECT 8 SCENE EDIT LIST Press 5 SELECT SCENE NUMBER Select a scene number from 1 to 8 MARK BEGINNING OF SCENE Play the tape in Deck 1 to the start of the desired scene and press SCENE TITLE The VCR will save the starting counter position of this scene MARK END OF SCENE Play the tape in Deck 1 to the end of the same scene and press SCENE TITLE The VCR will save the ending counter position of this scene To clearthe end point press CLEAR once To clear the begin point press CLEAR again ADD MORE SCENES OPTIONAL Repeat Steps 6 8 to store up to 8 total scenes ASSEMBLE THE TAPE Press COPY TAPE The VCR will automatically copy all marked scenes in order from Deck 1 to Deck 2 When this processed is finished repeat Steps 3 10 to add additional scenes ONILIGA IJILVWOLNYV 7 Edit the COPY TAPE button E IV CH ew MANUAL EDITING GO VIDEO NOTE Skip Edit Skip Edit allows you to remove commercials in 1 5 minute blocks while copying a tape When the commercials start press SKIP once for every minute of commer cials to be deleted The Dual Deck VCR will automatically pause the copy fast forward 1 5 minut
20. into English or French Dual Deck VCR User s Guide Follow these steps to tum Auto Clock Set on or of You can also specify the time zone and the channel that Auto Clock Set uses to determine your local time al 1 Copy Settings 2 Playback Settings 3 Record Edit Settings 3 4 Channel Settings 5 gt VCR Settings 6 Timer Recording 7 Language Langue 4 MIY Move gt Sel MENU Quit VCR SETTINGS 1 Child Lock 2 Remote Eject 3 Panel Display 4 Screen Display 5 RF Output Channel 6 gt Clock Settings 7 Advanced Settings Ai Move gt Sel MENU Quit CLOCK SETTINGS Set Clock Manually Daylight Savings gt Auto Clock Set Time Zone Clock Set Channel Use 0 9 for Channel V Move gt Sel MENU Quit for Auto Clock Set Time Zone Y Clock Set Channel press NOTE If Auto Clock Set is off then Time Zone and Clock Set Channel will not appear on the Clock Settings menu OPEN MAIN MENU Press MENU SELECT Press 5 VCR SETTINGS SELECT CLOCK SETTINGS Press 6 ADJUST CLOCK SETTINGS Use the arrow keys to select and set each of the following Daylight Savings Please refer to page 39 Auto Clock Set On Auto Clock Set will search for a local channel and detect the time automatically Off Auto Clock Set will be disabled You must set the clock manually Time Zone Auto Automatically detects your local time zone Eastern Selects Eastern S
21. servicing to qualified service personnel DAMAGE REQUIRING SERVICE Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the product c If the product has been exposed to rain or water d Ifthe product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation e If the product has been dropped or damaged in any way and f Whenthe product exhibits a distinct change in performance this indicates a need for service REPLACEMENT PARTS When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards SAFETY CHECK Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in proper operating condition WALL OR CEILING MOUNTING The product should be mounted to a wall or ceiling only as recommended by the manufacturer
22. set the Deck 2 record speed to SLP manually see page 14 Auto Automatically adjusts the Deck 2 record speed to avoid running out of tape before copying is complete see note on Complete Program Record below biss Move gt Sel MENU Quit 4 Copy Audio Insert Please refer to page 21 NOTES Complete Program Record CPR changes the copy speed from SP to SLP if necessary to reduce the risk of running out of tape before copying is complete EZ Copy If the tape runs out in Deck 2 before copying is complete neither tape will rewind to alert you that a problem occurred This Chapter will show you how to play videotapes and set special playback preferences Follow these steps to play a standard VHS videotape 1 INSERT TAPE Insert a standard VHS tape into Deck 1 or Deck 2 2 PLAY TAPE Press PLAY 3 OPTIONS DURING PLAYBACK Freeze To freeze a single frame press STILL F ADV Frame Advance To advance one frame at atime rotate the J OG WHEEL forward or backward or press STILL F ADV again Shuttle To gradually increase or decrease the playback speed rotate the SHUTTLE RING forward or backward Slow Motion To play in slow motion press SLOW Picture Search To cue or review at 5 times normal speed press and release FAST FORWARD or REWIND J et Search To cue or review at 7 times normal speed press and hold FAST FORWARD or REWIND
23. tape with a record safety tab into Deck 1 or Deck 2 z OPEN MAIN MENU Copy Settings Playback Settings Press MENU Record Edit Settings VCR Settings H SELECT TIMER RECORDING SM on necerging Press 6 see notes below 7 Language Langue s Move Sel MENU Quit SELECT EVENT NUMBER Use the 0 9 keys to enter any available event number between 01 and 16 SET DATE AND TIME SELECT EVENT 1 16 01 Se Use the 0 9 keys or UP DOWN RIGHT arrow cng keys to set the date and time of the event To Ga correct an entry press the LEFT arrow key to go Eer back and then enter the new numbers To skip SIE an entry without changing it press the RIGHT SE arrow key SIE E To Move gt Select Set Month E Enter the month as a 2 digit number e g for to select anuary press 01 D 0 9 event 01 16 J SE Set Day Enter the day as a 2 digit number e g for the ET MONTH 1 12 u n 1 2001 10 30PM 1H00M ninth press 09 Su Mo Tu We Th Set Hour a i 2 Enter the hour as a 2 digit number e g for 12 00 press 12 23 Set Minute 30 Enter the minute as a 2 digit number e g for 1 Time Ch10 Deck 1 Auto 12 00 press 00 Set AM PM use to set month day Press 1 for AM or 2 for PM hour minute am pm continued NOTES e You can also select the Timer Recording menu by pressing SET TIM ER on the remote control If you select Timer Recording without having set the clock the Clock Settings menu will appear Yo
24. your decision to reset factory settings or press MENU to cancel and exit the menu system APPENDIX This Chapter provides customer support information as well as a list of frequently asked questions technical specifications and the product warranty Make sure batteries are fresh and properly installed Press VCR key Note If you press TV key by acci dent remote will only operate TV The chart below will help you solve common challenges with your Dual Deck VCR If you don t find the answers you need here you can contact our Customer Service Department as follows AJ Phone 800 736 7679 C E M ail customersupport govideo com Web www govideo com UJ r m SYMPTOM SOLUTION S un No picture Press TV VCR until VCR indicator lights on front I panel display O e Set RF Output to channel 4 see page 31 Poor picture quality e Set RF Output to channel 4 see page 31 O e Adjust tracking with AUTO and TRK up down keys 4 Clean video heads with nonabrasive head cleaning tape Remote not working Remove all obstacles and point directly at VCR Z Remote won t operate TV Program the remote control for your brand of TV see page 4 Press the TV key Remote control doesn t operate every TV function Some TV brands only respond to limited number of functions On screen display shows Error Turn power off then turn power on again Inspect tape slots for foreign o
25. 10 12 16 22 Record Settings 15 Record Source 9 15 Record Speed 8 9 11 14 Recording Basic 14 Remote Control Overview 5 Remote Eject 41 Remove Channel 40 Repeat 12 Repeat key 6 Return to 0 00 00 29 Rewind key 6 7 RF 2 RF Output Channel 31 S Safety iii SAP 40 SAP indicator 8 Satellite Receiver 33 Scan Index Marks 28 Scene Title key 6 19 22 Screen Display 41 Search Features 27 29 Search Index Marks 28 Search Index key 6 Sequential Playback 13 Sequential Recording 15 Set Timer key 6 Show Weak Channels 40 Shuttle 12 Shuttle ring 6 Simulcast 17 40 Skip 12 Skip Edit 20 Skip key 6 Slow keys 6 Slow Motion 12 SLP 8 14 18 Source Tape 10 19 20 21 SP 8 14 18 SP SLP key 6 Speed Matching 11 Stereo 31 35 40 Stereo Hookup 32 Stereo indicator 8 Still F Adv key 6 Stop Eject key 6 7 T T 120 Tape 18 Tape Counter 8 Tape Missing 18 Tape Missing Tab 18 Target Tape 10 19 20 21 Technical Specifications 45 Time Zone 37 Timer indicator 8 Timer Recording 16 33 Timer Recording Errors 18 Titler Message Recording 22 Titler On Screen 15 22 Tracking Auto 12 Manual 12 Tracking keys 6 Troubleshooting 43 TV key 6 TV Mode 4 TV View 9 TV View key 6 33 TV SAP 40 TV VCR indicator 8 TV VCR key 6 7 32 U Unpacking 1 V VCR key 6 VCR mode 4 VCR Settings 41 Video Game 33 Volume key 6 W Warranty 46 Weekly 17 Dual Deck VCR User s Guide IND 0 NAW EE je
26. ATION OF THIS WARRANTY PERIOD Some states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you This Exclusive Limited Warranty gives you specific legal rights and you may also have other rights which vary from state to state GOVIDEO WARRANTY ADMINISTRATOR GoVideo 7835 East McClain Drive Scottsdale Arizona 85260 1732 480 922 0896 customerservice govideo com Dual Deck VCR User s Guide Symbols 0 9 keys 5 l Time 17 100 key 5 8 Scene Edit List 15 19 A Add Channel 40 AM PM indicator 8 Audio Outputs 32 Source 21 Auto Channel Search 3 40 Auto Clock Set 3 37 Auto Commercial Free Copy 26 Auto Play Rewind 12 13 20 Auto Setup 3 Auto Show Finder 27 28 B Background Blue 25 Video 25 Batteries Insert 1 Blank Search 29 C Cable 40 Cable Box Record Source 17 Camcorder 33 35 Channel 3 4 2 31 Channel Audio 40 Channel keys 5 7 Channel Settings 40 Channel Source 40 Child Lock 41 CLEAR key 5 19 22 CLK CTR key 5 Clock Set Channel 37 Clock Settings Auto 37 Manual 38 Commercial Advance 13 23 Override 25 Commercial Free Copy 11 Commercials Marking 24 Complete Program Record 11 18 Composite Video 2 Connections Advanced 31 Alternative Cable Box 34 Antenna 2 Basic 2 Cable box 2 Cable TV 2 Copy Audio Insert 11 21 Copy indicator 8 Copy Settings 11 Copy Tape key 5 7 10 19 Copy Protected Tapes 10 Copying Basic 10 Counter
27. CH MENU Is This a Purchased Rented Movie 13 Yes 2 No EOS PESE OY gt Sel MENU Quit fette SEARCH MENU 1 2 Index Search Scan Blank Search Direct Time Search Return to 0 00 00 Find Next Preview Find Start of Movie ik Move Sel MENU Quit OVERRIDING PREVIEW SKIP You can temporarily override the preview skip in two ways While the VCR is rewinding to the beginning of a preview press SEARCH INDEX and the VCR will search for the next preview While the VCR is searching for the next preview and you see the start of a preview you want to watch press SEARCH INDEX and MOVIE ADVANCE will reverse back to the start of that preview NOTES INSERT TAPE Insert a purchased rented video in Deck 1 MOVIE ADVANCE works in Deck 1 only Tapes must be recorded in SP with the record safety tab removed OPEN SEARCH MENU Press SEARCH INDEX IS THIS A PURCHASED RENTED MOVIE The VCR will recognize that the tape is missing the record safety tab but must verify that it is a purchased rented movie and not a personal recording Press 1 for Yes or 2 for No If you choose Yes continue with Step 4 f you choose No the tape is a per sonal recording and MOVIE ADVANCE will not be available Try the other search features starting on page 28 FIND NEXT PREVIEW OR START OF MOVIE Press 5 or 6 to select one of the following 5 Find Next Previe
28. Deck1 Auto option Then use the 0 9 keys to set the channel number you wish to record as a two digit press a to set source number 2 Line 1 Records from an external source connected to SET DECK 1 2 1 the front line inputs 1 Aug 2001 10 30PM 1H00M Su Mo Tu We Th Fr Sa 3 Line 2 1 2 3 4 Records from an external source connected to 5 G vy G 9 a i the rear line inputs 12 13 14 15 16 17 18 19 20 21 22 23 24 25 4 Ch s Channel Simulcast as 27 e 2 so m Records video from TV and audio from Line 2 l Time Ch10 Aus usually connected to an FM stereo Use the 0 9 keys to set the channel number press OO to set deck 9 SET DECK Press 1 or 2 or use the UP DOWN arrow keys continued to set which deck will record the event as NOTE chosen in Step 1 1 Deck 1 The event will be recorded in Deck 1 If you are recording with a cable box set Source to Channel 2 3 or 4 whichever your cable box 2 Deck 2 l uses then select the desired The event will be recorded in Deck 2 channel on the cable box 6 Timer Record continued SET SPEED 1 3 1 1 Aug 2001 10 30PM 1H00M Su Mo Tu We il Lime Chl0 Deck SELECT EVENT 1 16 01 1510 30 PM On Wednesdays Ch 10 Deck 1 Auto 4 Ny To Move gt Select TIMER RECORDING ERRORS Tape Missing Solution Insert a tape in the record ing deck Tape Missing Tab Solution Insert a video cassette with a record saf
29. Dual Playback 4 Auto Play Rewind 5 2 COMMERCIAL ADVANCE biss Move gt Sel MENU Quit COMMERCIAL ADVANCE 1 Mark Commercials 2 gt CA Playback 3 Background iv Move Sel MENU Quit NOTE 1 OPEN MAIN MENU Press MENU SELECT PLAYBACK SETTINGS Press 2 SELECT COMMERCIAL ADVANCE Press 5 ADJUST COMMERCIAL ADVANCE SETTINGS Press 2 or 3 to set each of the following 2 CA Playback Auto During playback of a tape with marked commercials the VCR will automati cally fast forward through commercial groups at approximately 7 times normal speed SP Manual Commercials will be shown as usual To manually bypass marked commercial groups press SEARCH INDEX 3 Background Blue While fast forwarding through com mercials the VCR will display a blue back ground Video While fast forwarding through commercials the VCR will display the video recording SKIP COMMERCIALS Play a tape with marked commercials in Deck 1 A commercial group that starts in the first two minutes or last two minutes of a record ing will not be skipped A commercial will not be skipped if a record ing starts in the middle of a commercial segment if one isolated commercial is shown without others or if a commercial is longer than one minute Partofarecorded program may be skipped if the program segment is between commer cials and less than one minute or if there are
30. Player DSS Digital Satellite System VCR3 Third Video Cassette Recorder CAM Camcorder or Videocamera GAME Video Game RCVR Ster eo Receiver TV Television SET REAR A V INPUT Press 3 to label the Rear A V Input to one of the following Line2 Line 2 default Vid2 Video 2 SAT Satellite Receiver LD Laserdisc Player DVD Digital Video Disc Player DSS Digital Satellite System VCR3 Third Video Cassette Recorder GAME Video Game RCVR Ster eo Receiver TV Television JINI ONITAGVI lfldNI Appendix A Advanced Connections APPENDIX This Chapter will show you how to customize your Dual Deck VCR experience with settings that affect language clock channels displays and moe Follow these steps to set the on sceen menu language to English or French 1 OPEN MAIN MENU Press MENU 2 SELECT LANGUAGE Press 7 repeatedly to set the on screen Copy Settings S Playback Settings menu language to English or French Record Edit Settings Channel Settings VCR Settings Timer Recording 7 gt Language Langue 4 v Move gt Sel MENU Quit MENU PRINCIPAL Config de copier Config de lecture Config d enreg dit Config des canaux Config du magn toscope Enreg programmable 7 gt Language Langue Pi Chois gt Chang MENU Fin LANGUAGE SETTINGS NOTE Each time you press 7 the entire Main Menu will be translated
31. STOP aul To automatically edit out commercial segments in 1 5 minute blocks see note on Skip Edit or see Commercial Free Copy on page 26 Dual Deck VCR User s Guide Follow these steps to insert a new audio track such as recorded music or narration onto your target tape The new audio can be recorded from the front or rear line inputs 1 gt Copy Settings Playback Settings Record Edit Settings Channel Settings VCR Settings Timer Recording Language Langue vV Move gt Sel MENU Quit COPY SETTINGS 1 Comm Free Copy 2 EZCopy 3 Speed Matching 4 Copy Audio Insert biss Move gt Sel MENU Quit NOTES OPEN MAIN MENU Press MENU SELECT COPY SETTINGS Press 1 SET COPY AUDIO INSERT Press 4 to choose from the following L1 Line 1 While copying a new linear audio track will be recorded from an external audio source connected to the front audio jacks L2 Line 2 While copying a new linear audio track will be recorded from an external audio source connected to the rear audio jacks O ff Copy Audio Insert is disabled The existing audio will be copied CONNECT AUDIO SOURCE Connect your external audio source to the front Line 1 or rear Line 2 inputs using standard RCA audio cables see notes below CUE TAPES Cue up all devices Source tape in Deck 1 Target tape in Deck 2 The external audio source tape player CD player etc connected to L
32. Settings Nv Move gt Sel MENU Quit to Exit Menu system You have changed the RF Output Channel to Channel 4 Please tune your TV to Channel 4 OPEN MAIN MENU Press MENU SELECT VCR SETTINGS Press 5 SET RF OUTPUT CHANNEL Press 5 to set the RF Output Channel to 3 or 4 whichever is not currently in use EXIT MENU SYSTEM Press MENU Atthis point an alert message will appear for a few seconds reminding you to change your TV to 3 or 4 Locate your TV remote and proceed with Step 5 CHANGE TV CHANNEL Set your TV to channel 3 or 4 whichever you selected in Step 3 The VCR should function normally e Ifthe picture is not improved repeat this process and return to the previous channel CH3 4 COOC Set TV to channel 3 or 4 dad TANNVHO LNdtNnoO Appendix A Advanced Connections Connect to Stereo TV or Monitor TV Line Inputs STEREO TV MONITORTV CONNECTION CONNECT VCR TO STEREO TV MONITOR TV Connect RCA cables from the Line Out audio jacks R and L and video jack on the back of the VCR to the line inputs on your stereo television or monitor TV SET TV TO AUXILIARY MODE Set your stereo TV monitor TV to Aux Video or Line referto your owners guide forthe proper setting CL Follow these steps to connect your Dual Deck VCR to a stereo system stereo television or monitor TV D Y O Connect to
33. Skip To skip ahead in 1 5 minute incre ments press SKIP 1 5 times in sequence Repeat To replay the last 30 seconds of the tape press REPEAT Manual Tracking To adjust tracking manually press the TRK keys Auto Tracking To resume automatic tracking press AUTO BASIC PLAYBACK JOG WHEEL SHUTTLE RING GO VIDEO NOTES Tapes without record safety tabs can be set to play automatically when inserted CL D see Auto Play Rewind on page 13 To resume normal playback at any time press PLAY Record Safety Tab Dual Deck VCR User s Guide Follow these steps to set the default Playback Settings for your Dual Deck VCR press PEN MAIN MENU Press MENU 1 Copy Settings 2 SELECT Press 2 PLAYBACK SETTINGS 2 Playback Settings 3 Record Edit Settings 3 A Channel Settings VCR Settings Timer Recording Language Langue 1 4 5 6 H bis Move Sel MENU Quit PLAYBACK SETTINGS 12 Deck 1 Hi Fi 2 Deck2 Hi Fi 3 Dual Playback 4 Auto Play Rewind 5 COMMERCIAL ADVANCE 2 M EE VR gt Sel MENU Quit 3 press for Deck 1 Hi Fi for Deck 2 Hi Fi for Dual Playback for Auto Play Rewind for COMMERCIAL ADVANCE A ul DJ UST PLAYBACK SETTINGS Press 1 2 3 4 or 5 to set each of the following Deck 1 Hi Fi On The VCR will play the Hi Fi audio track on tapes in Deck 1 Off The VCR will play the linear mono audi
34. WIND etc will only affect Deck 1 DECK 2 Press to make Deck 2 active All deck control keys PLAY REWIND etc will only affect Deck 2 IER DISPLAY WHEEL Press to turn the O n Screen Display on and off FAST FORWARD While the VCR is stopped press to fast forward the tape in the active deck While a tape is play SHUTTLE ing press to visually search forward Cue In the RING menu system press to make selections GO VIDEO JOG WHEEL While a tape is paused rotate the J og Wheel forward or backward to advance or rewind the tape one frame at a time 2 Quick Tour CONT REMOTE CONTROL LCV While watching TV press to display the last channel viewed MENU Press to display the VCR s Main M enu MUTE Press to turn the sound on and off PLAY Press to play the tape in the active deck In the menu system press to move the blinking selection arrow up POWER Press to power the VCR on and off REC Press to start recording in the active deck Press repeatedly to add recording time in 30 minute increments see One Touch Recording page 14 REPEAT While a tape is playing press to replay the last 30 seconds REWIND While the VCR is stopped press to rewind the tape in the active deck While a tape is playing press to visually search backward Review In the menu system press to return to the previ ous menu SCENE TITLE While in the 8 Scene Editor press
35. ables automatic playback of tapes and automatic power on when you insert tapes Appendix B Custom Settings RESET FACTORY SETTINGS 42 Follow these steps to reset the Dual Deck VCR to its factory settings If you wish you may peserve your clock settings and any saved timer ecordings 1 OPEN MAIN MENU press Press MENU 1 Copy Settings Press 5 2 Playback Settings 2 SELECT VCR SETTINGS 3 Record Edit Settings 3 SELECT ADVANCED SETTINGS 4 Channel Settings 5 VCR Settings Press 7 6 Timer Recording 7 Language Langue Mi Move Sel MENU Quit SETTINGS Press 1 4 SELECT RESET FACTORY Press 1 or 2 VCR SETTINGS Remote Eject Panel Display 2 Clears all VCR settings including the Screen Display clock and any saved Timer Recordings RF Output Channel Clock Settings 5 DECIDE WHAT TO RESET 1 Resets everything except the clock Fui Loek and any saved Timer Recordings TEA SURG SENGE 6 RESTORE SETTINGS Biv Move gt Sel MENU Quit ADVANCED SETTINGS 1 gt Reset Factory Settings 2 Front A V Input 3 Rear A V Input T V Move gt Sel MENU Quit RESET FACTORY SETTINGS WARNING ALL SETIINGS press 1 to Keep Timer Events Mir ARM amp Clock Settin 1 Keep Timer Events And g Clock Setting 2 Clear Everything press 2 to Clear Everything Press CLEAR to Reset then press CLEAR Press MENU to Quit C 2 Dual Deck VCR User s Guide Press CLEAR to confirm
36. ack from Line 1 front panel inputs or Line 2 rear panel inputs appears on your TV screen then press REC on the active deck Timer Record From Device Select Line 1 or Line 2 as your Record Source in the Timer Record menu see page 17 All other Timer Record settings should be set in the usual manner Label Device You can label the front and rear A V inputs to match the device you have connected see page 35 df134 OOH A V YAHLO Appendix A Advanced Connections ALTERNATIVE CABLE BOX HOOKUP Follow these steps if you have a cable box and want to be able to watch a second channel while recording a TV program From Cable Wall Outlet To Cable Box Input Cable Box TV Input Output VHF UHF 1 CONNECT CABLE TO TV TUNE THE TV Connect an RF coaxial cable from Set the TV to channel 3 or 4 which the wall outlet to the IN FROM ever is used by your cable box ANT jack on the back panel of the DVD VCR TUNE CABLE BOX With all three devices turned on set 2 CONNECT DVD VCR TO your Cable Box to channel 3 or 4 CABLE BOX whichever is set on the DVD VCR Connect the RF coaxial cable from and then press SETUP ENTER the OUT TO TV jack on the back panel of the DVD VCR to the Input CONNECTION IS COMPLETE jack on the Cable Box The Language Langue Idioma menu will appear on your television 3 CONNECT CABLE BOX TO TV Connect an RF coaxial cable from the
37. apes as well as scan through the previews at the start of rented movies Follow these steps to place Index Marks on your recordings Press for M anual Index M arks Press for Automatic Index Marks GO VIDEO NOTE WHAT ARE INDEX MARKS Index Marks are like bookmarks on your videotapes They are inserted automatically at the start of every recording or you can place them manually anywhere on a tape Later you can locate these bookmarks using Index Search or Index Scan Automatic Index Marks The VCR places an Index Mark on your tape the moment you start recording This includes standard recording O ne Touch Recording Timer Recording copying or recording with the 8 Scene Editor Manual Index Marks You can place an Index M ark manually any time a tape is recording by pressing SEARCH INDEX Index will flash briefly on the On Screen Display while the mark is recorded lnosasv SAAVNW XAACNI VHS Index Search System VISS The Index system used on the Dual Deck VCR is the VHS standard indexing system called VHS Index Search System or VISS This system is compatible with tapes made on other VCRs and camcorders using the VISS system 9 Search INDEX SEARCH SCAN NOTE Follow these steps to locate recordings by scanning or searching for Index Marks SEARCH press inen SEARCH MENU 1 Index Search Scan 2 Blank Search 3 Direct Time Search 4 Return to 0 00 00
38. awu due auu sieg HO Bulpioday ena t SONLLI3S 1IQ3 qu023u no nNaW PS evw NY punoibpeg pegfeld v3 Z SEWU EW T SINVAGV 1VI2U3WIWO2 INO ANAW les eww Wy 32NVAQVAIVIDH3WIWOO S puwew Kejgoxnv v yeqe ena iiHzoped Z IJIH TPA r S NILLIS Ed YNO NNAW PS e ow My Au olpny Ado v Dune paads Adoz Ado3 aa uo ET SONILL3S AdOD WALSAS NANNAN OILI amp tAGCG 3nO nN3W les e w an amp uej sBenBue1 Buipaooau sawt sbumes YDA sBumes jauueyd sBumes 1p3 pJooau sbumes pegfeld sBumes Ado t ANSW NIVW GO VIDEO
39. aylight Savings if Auto Clock Set set the time incorrectly 1 Copy Settings 2 Playback Settings 3 Record Edit Settings 4 Channel Settings 5 gt VCR Settings 6 Timer Recording 7 Language Langue V2Move EE MENU Quit VCR SETTINGS 1 Child Lock 2 Remote Eject g Panel Display 4 Screen Display 5 RF Output Channel 6 gt Clock Settings 7 Advanced Settings V Move gt Sel MENU Quit CLOCK SETTINGS Set Clock Manually gt Daylight Savings Auto Clock Set Time Zone Clock Set Channel Use 0 9 for Channel FAL Move gt Sel MENU Quit press gt gt NOTES for Daylight Savings OPEN MAIN MENU Press MENU SELECT VCR SETTINGS Press 5 SELECT CLOCK SETTINGS Press 6 SELECT DAYLIGHT SAVINGS Press the down arrow key until Daylight Savings is selected ADJUST DAYLIGHT SAVINGS Press the right arrow key to select from the following Auto The VCR will automatically use local channel information to determine the status of Daylight Savings Time in your area and then set the clock accord ingly Off The VCR will not adjust the clock for Daylight Savings Time On The VCR will adjust the clock for Daylight Savings Time as follows One hour will be added to the time at 2 00 AM on the first Sunday of April and one hour will be subtracted from the time at 2 00 AM on the last Sunday in October INIL SONIAVS LHOITAVA If Auto Clock Set is off
40. bjects VCR doesn t work Unplug VCR for 10 seconds then plug it in again If still doesn t work unplug VCR for at least 15 minutes then plug it in again Note If the clock is still set you haven t unplugged it long enough If still doesn t work VCR must be serviced by an authorized service center Appendix C Help SYMPTOM SOLUTION S Cannot record from cable box Set VCR to cable box output channel 2 3 or 4 then select desired channel on cable box Cannot Timer Record Set clock to correct time see page 38 Copy speeds do not match Turn Speed Matching on see page 11 CONT Tape ejects during copy or record Place piece of tape over record safety tab opening VCR automatically plays and rewinds To turn Auto Play Rewind off see page 13 Turn EZ Copy off see page 11 8 Scene Edit List not working Insert source tape in Deck 1 8 Scene Edit List is unavailable while copying a tape Cannot eject tapes with remote Turn on Remote Eject in menu system see page 41 Remote eject is unavailable if scenes are programmed in 8 Scene Edit List Clear scenes from Edit List or press STOP ma on front panel to erase scenes automatically Cannot reset Deck 1 tape counter Deck 1 counter reset is unavailable if scenes are pro grammed in 8 Scene Edit List Clear scenes from Edit List or press STOP ma on front panel to erase scenes auto
41. d Play for best quality SLP Super Long Play for maximum recording time 3 times longer than SP SELECT DESIRED CHANNEL INPUT Use the 0 9 keys or the CH keys to select the channel you wish to record or use the TV VIEW key to select Line 1 front A V inputs Line 2 rear A V inputs or the other deck START RECORDING Press REC OPTIONS DURING RECORDING To pause press STILL F ADV To resume press REC again To stop press STOP ms To watch a different channel press TV VCR to switch to TV mode then select a channel on your TV To watch another videotape insert a tape in the other deck and press PLAY e One Touch Recording To add recording time in 30 minute increments press REC repeatedly OTR will appear on the on screen display followed by the number of minutes the VCR will record Continue pressing REC to add up to 9 hours and 30 minutes When the recording time has elapsed the VCR will stop recording auto matically i Follow these steps to record a television show currently in progress Z O ad OQ LLI ad VCR _ SCENE TITLE CH O Un O z DECK2 en GO VIDEO NOTE e Ifyou pr ess POWER during One T ouch Recording the fr ont panel display will flash and the VCR willtur n off automatically when the recording time has elapsed e OTR Loop Recod When you reach OTR 9 30 press REC again to enter OTR Loop mode The selected Deck will record over and ove
42. e VCR will begin marking commer cials in 59 seconds No action is required to mark the commer cials on the recording simply wait 59 sec onds forthe confirmation screen to count down If you are not present for the 59 second countdown the VCR will automatically mark the commercials anyway e g if you set a Timer Recording or One Touch Recording and the TV is turned off the commercials will still be marked To cancel press STOP ma in Deck 1 and the commercials will not be marked MARK COMMERCIALS When the 59 seconds have elapsed the VCR will rewind to the start of the recording and then search forward and mark groups of com mercials This process takes approximately 15 minutes for each hour of recorded tape The VCR will stop when finished Rewind the tape and proceed to Skipping Commercials on the following page e When you use T imer Recor ding to r ecord two consecutive shows on the same channel pr ogram each show separately so thatthe pr ologuesand epiloguesar enot automatically skipped e COMMERCIALADV ANCE will onlymarkr ecordingslongerthan 20 minutes Dual Deck VCR User s Guide Follow these steps to automatically skip marked commercials while watching a taped TV show 1 Copy Settings 2 gt Playback Settings Record Edit Settings Channel Settings VCR Settings Timer Recording Language Langue Idioma 4 v Move EE MENU Quit PLAYBACK SETTINGS 1 Deck 1 Hi Fi 2 Deck 2 Hi Fi 3
43. es and resume copying Leave at least 15 seconds of blank tape at the beginning of a tape to ensure a crisp edit e Follow these steps to edit your tapes manually using BEFORE YOU BEGIN Turn off EZ Copy see page 11 Turn off Auto Play see page 13 INSERT SOURCE TAPE Insert your source tape original footage in Deck 1 INSERT TARGET TAPE Insert your target tape in Deck 2 Make sure the tape has a record safety tab CUE SOURCE TAPE Press the DECK 1 key then use the deck control keys PLAY STOP ma FAST FORWARD REWIND to position the source tape at the start of the desired segment Stop or pause the tape at this position CUE TARGET TAPE Press the DECK 2 key then use the deck control keys to position the target tape where you wish copying to begin Stop or pause the tape at this position START EDITING Press COPY TAPE The Copy indicator will light on the front panel display and the VCR will begin copying from Deck 1 to Deck 2 PAUSE EDITING Press CO PY TAPE again to pause The Copy indicator will blink on the front panel display REPOSITION SOURCE TAPE Press the DECK 1 key then use the deck control keys to reposition the source tape at the start of the next segment Stop or pause the tape at this position RESUME EDITING Repeat Steps 6 8 to add all desired scenes from Deck 1 to Deck 2 When finished select Deck 2 then press
44. ess to set the remote to operate your televi sion Note When selected the keys on the remote will not operate the VCR TV VCR Your TV and your VCR both have television tuners This allows you to watch one show with the TV tuner while recording another show with the VCR tuner Press the TV VCR key to switch back and forth between the TV tuner and the VCR tuner TV VIEW Press to change the view on your television among all the Dual Deck VCR input sources Tuner Deck 1 Deck 2 Line 1 and Line 2 This allows you to record a show in Deck 1 and watch another tape in Deck 2 VCR Press to set the remote to operate your VCR VOLUME Press to adjust the volume Chapter 2 Quick Tour The following is an overview of the Dual Deck VCR front panel GO VIDEO DDV3110 1 POWER Press to power the VCR on and off 2 DECK SELECT Press to switch control between Deck 1 and Deck 2 3 COPY TAPE Press to copy the tape in Deck 1 to the tape in Deck 2 see page 10 4 CHA Press to select the next or previous channel 5 TV VCR Press to switch back and forth between the TV tuner and the VCR tuner 6 MENU Press to display the VCR s Main Menu 7 REC Press to start recording in the active deck Press repeatedly to add recording time in 30 minute incre ments see page 14 8 REWIND While the VCR is stopped press to rewind the tape in the active deck While a tape i
45. ety tab Not Ready Solution The recording deck is already in use Press STOP ma on this deck Overlapping Events Solution If two programmed events overlap you will be prompted to either delete one of the events or allow them to overlap If you allow them to overlap the event with the earliest starting time will be com pletely recorded then the remainder of the event with the next earliest starting time will be recorded TIMER RECORDING ERRORS NOTE 10 SET SPEED Press 1 2 or 3 or use the UP DOWN arrow keys to set the record speed 1 Auto Activates Complete Program Record see note below 2 SP Standard Play Use for best quality a T 120 tape will record for 2 hours 3 SLP Super Long Play Use for maximum recording time a T 120 tape will record for 6 hours VIEW EVENT SUMMARY Press M ENU to confirm the event and view a summary of all programmed events The event is now stored in memory and will record at the scheduled time It is not neces sary to turn the VCR off or put it into a Timer mode the event will record regard less of the state of the VCR The Timer indicator will light on the front panel display If there is a timer recording error the Timer indicator will blink see Timer Recording Errors below To program another event select an avail able event number To edit an event select its event number To delete an event use the up dow
46. for Channel V Move gt Sel MENU Quit NOTES OPEN MAIN MENU Press MENU SELECT VCR SETTINGS Press 5 SELECT CLOCK SETTINGS Press 6 CHOOSE SET CLOCK MANUALLY Press the right arrow key SET THE TIME Use the 0 9 keys or the up down arrow keys to set each of the following items To skip an item press the right arrow key Set Month Enter the month as a 2 digit number e g J anuary 01 Set Year Enter the year as a 2 digit number e g 2002 2 01 Set Day Enter the day as a 2 digit num ber e g the ninth 09 Set Hour Enter the hour as a 2 digit number e g 12 xx 2 12 Set Minute Enter the minute as a 2 digit number e g Xx 25 25 Set AM PM Press 1 for AM 2 for PM SAVE SETTINGS Press MENU to save and exit the menu system SET MONTH 1 12 08 press 12 25 PM Sa to SETMONTH SET YEAR SET DAY SET HOUR SET MINUTE MENU to Quit SET AM PM If Auto Clock Set is available but has set the time incorrectly try adjusting Daylight Savings Time page 39 Time Zone page 37 and Clock Set Channel page 37 before setting the clock manually If you choose Set Clock Manually then Auto Clock Set will automatically turn off and Time Zone and Clock Set Channel will be removed from the menu Dual Deck VCR User s Guide Follow these steps to set Daylight Savings Time manually You should only set D
47. g 7 Language Langue 3 Move Sel MENU Quit VCR SETTINGS 12 Child Lock Remote Eject Panel Display Screen Display RF Output Channel Clock Settings Advanced Settings V Move gt Sel MENU Quit NOTE OPEN MAIN MENU Press MENU SELECT VCR SETTINGS Press 5 ADJUST VCR SETTINGS Press 1 2 3 or 4 to set each of the follow ing 1 2 3 D Child Lock Off The VCR front panel keys will function normally On The VCR front panel keys will be locked to prevent children from tamper ing with the VCR Once this feature is enabled you must use the remote control to operate the VCR Remote Eject On Allows you to eject tapes by press ing STOP ma on the remote control Off Prevents tapes from being ejected unless you press STOP ma on the front panel Panel Display Auto The front panel display will be bright from 6 00 a m to 10 00 p m and dim from 10 00 p m to 6 00 a m Bright The panel display will be bright at all times Dim The panel display will be dim at all times Off The panel display will be off at all times Screen Display On The entire On Screen Display OSD will be shown each time you press a deck or tuner control key Play Stop Ch etc Off The OSD will remain off unless you press DISPLAY Auto The OSD will only show informa tion relevant to the key you pressed SONILLAS AIDA Child Lock also dis
48. imer Recordings on your tapes For example when Index Scan stops at an Index Mark and plays a few seconds of tape you will see the date and time the show was recorded Dual Deck VCR Users Guide Follow these steps to find the nearest blank segment of tape find a specific tape counter position or return to 0 00 00 SEARCH press ma SEARCH MENU 1 Index Search Scan 2 Blank Search 3 Direct Time Search 4 Return to 0 00 00 5 Manual CA Playback Nv 2Move Sel MENU Quit 5 for Manual CA Playback va DECK ONE TIME SEARCH Search To Enter Counter Value Enter 1 Pos Or 2 Neg Press CLEAR To Correct C MENU TO Quit p MANUAL CA PLAYBACK If you set CA Playback to Manual see page 25 you can still fast forward through marked commercials with Manual CA Playback While you are watching a tape with marked commercials press SEARCH IN DEX and then press 5 The VCR will search forward to the end ofthe next marked commercial group then resume playback This feature works in Deck 1 only Tapes must be recorded in SP or SLP INSERT TAPE Insert a videotape in Deck 1 or Deck 2 fthe tape has a record safety tab you will see the menu at left fthe tape is missing the record safety tab please see MOVIE ADVANCE on page 30 OPEN SEARCH MENU While the tape is stopped or playing press SEARCH INDEX SELECT SPECIAL SEARCH FUNCTION
49. imum ENVIRONMENT 41 104 F 5 40 C 1096 7596 humidity DIMENSIONS 534 x 324 x 102 mm 21 x 12 3 4 x 4 WEIGHT 5 0 kg 11 1 lbs 45 NHOAL SNOILIVOIJIDZJIdS 1IVDI WARRANTY DUAL DECK VCR LIMITED WARRANTY Who Provides the Limited Warranty During the warranty period the GoVideo Warranty Administra tor will honor Dual Deck VCR service for 90 days labor 1 year parts from the original date of consumer purchase See below for Commercial Industrial or Educational use coverage Dual Deck VCR remote controls are warranted for 90 days from the date of purchase 9 cays abor parts Who is Protected This warranty protects the original consumer owner of this GoVideo product What is Covered and How Long This warranty covers internal operating parts and service labor to repair or replace covered parts in this GoVideo product for 90 days labor 1 year parts from the date of purchase defined as follows 1 Original Consumer Retail Purchase 2 First Rental Purchase Agreement or 3 First Lease Purchase Agreement the Warranty Period Labor and replacement parts supplied during the Warranty Period are covered only for the remaining portion of the original Warranty Period The GoVideo Warranty Adminis trator shall have no liability for service under this warranty if non OEM Original Equip ment Manufacturer replacement parts are used in the repair of your GoVideo product What the Owner M
50. ine 1 or Line 2 COPY NEW AUDIO TRACK Press COPY TAPE on the VCR and PLAY on your external audio source at the same time The new audio signal will be copied on the linear audio track To hear the new soundtrack you must turn off Hi Fi audio for the desired playback deck see page 13 OlIGdNV AdOo lLludsNI H H H H If you wish to use a microphone to insert the new audio track it must be connected to a preamp Do not connect speaker outputs to the VCR If there is no audio signal the audio track will be blank Copy Audio Insert automatically reverts to Off when the VCR is turned off 7 Edit Follow these steps to add titles or credits to your home movies using the O n Screen Titler 1 OPEN MAIN MENU press o Press MENU 2 SELECT RECORD EDIT SETTINGS MAIN MENU Press 3 1 Copy Settings 2 Playback Settings 3 Record Edit Settings 3 SELECT SETUP TITLER MESSAGE oe Press 6 6 Timer Recording 7 Language Langue 4 COMPOSE YOUR MESSAGE idk Move gt Sel MENU Quit Use the up down left right arrow keys to select each character in your message 3 Press SCENE TITLE after each character to insert itin your message Press CLEAR to backspace and delete the previous character Aee off Choose from over 100 letters numbers and Date Time Stamp Timer symbols Deck 1 Rec Source Auto 8 Scene Edit List gt Setup Titler Message Press MENU to save your me
51. ire tape in Deck 1 then over the tape in Deck 2 then Deck 1 etc until you press STOP ms on the recording deck see note below Normal Each deck will record independently default setting N Date Time Stamp Timer The date time and record source will be stamped superimposed briefly at the start of all timer recordings Cont The date time and record source will be stamped continuously over all recordings see note below All The date time and record source will be stamped briefly at the start of all recordings Off The Date Time Stamp will be off W Deck 1 Record Source Auto is the recommended setting because the VCR will automatically record whatever is visible on the TV screen when you press REC You may also fix the Record Source to Line 1 the front A V inputs Line 2 the rear A V inputs Deck 2 or Tuner the current television show Deck 2 Record Source Auto is recommended for this setting as well You can also fix the Deck 2 record source to Line 1 Line 2 Deck 1 or Tuner DA 5 8 Scene Edit List Please refer to page 19 6 Setup Titler Message Please refer to page 22 SONILLAS QOQuooddw 5 Record TIMER RECORD This Chapter provides step by step instructions for programming Timer Recordings TIMER RECORDING Follow these steps to program your VCR to record up to 16 events SET TIMER INSERT TAPE 9r Insert a blank
52. l CONNECT VCR TO TV Standard RF Option Connect the supplied cable coaxial from the OUT TO TV jack on the VCR back panel to yourtelevision s antenna in jack Use this connection if your television is equipped with a basic antenna input OR Composite Video Option Connect a standard RCA cable from the Line O ut 1 jacks on the VCR back panel to your television s Line In jacks Be sure to match yellow to video red to right audio and white to left audio on your television and VCR Use this connection for better sound and picture quality if your television is equipped with line inputs PLUG IN VCR Connect the VCR power cord to a standard 120V 60Hz wall outlet LINE LINE IN2 IK 1 Bei To Line Inputs on your Television TURN ON TV VCR CABLE BOX Press POWER on your television VCR and or Cable Box SET TELEVISION CHANNEL Channel 3 If you chose the Standard RF Option set your television to channel 3 If you experience interference on channel 3 you may use channel 4 instead how ever you must first run Auto Setup with channel 3 then follow the instructions on page 31 to reset the RF Output to channel 4 OR Video In If you chose the Composite Video Option set your television to display its Video Input often labeled Video Line or Aux See your television owner s manual for the correct setting CONNECTION COMPLETE The Language Langue menu should
53. l Setup 4 2 QUICK TOUR 5 Remote Control iet ec e cat cd pn 5 Front Panel ctr eet et ei itat dete ns 7 Front Panel Display nee 8 On screen Display sssse m 9 3 COPY 10 Baslc Copylhg x uciio iicet rab dear Per 10 Copy Settings resnici aiaa aiii 11 4 PLAY 12 Basic Playback E 12 Playback Settings ssssme 13 5 RECORD 14 Basic Recording cce eene odit 14 Record Settings e eerie tnt idR enitn 15 SLNALNOOD dO ATAPVL 6 TIMERRECORD 16 Timer Recording i c a 16 Timer Recording Emmors 18 7 EDIT 19 Automatic Editing EE 19 Manual Editing s sss 20 Copy Audio Insert eme mb t s 21 On screen Ter 22 8 COMMERCIAL ADVANCE 23 Commercial Advance EE 23 Marking Commercial 24 Commercial Advance Playback ssescscecsrrerrnren 25 Commercial Free Copy ssssseeeeeme 26 Table of Contents BS 9 SEARCH 27 Aboutindex E ln EE Index Gearch Scan Special Search Options sssseese Movie Advance Henn APPENDIX A ADVANCED CONNECTIONS 31 RF Output Channel ecce eate Stereo Monitor HOOKUP seeeem Other A V Hook p i e ciae Alternative Cable Box Hookup eem Line Input Labeling eee APPENDIX B CUSTOM SETTINGS 36 Language Setting Auto Clock Settings cotes Manual Clock Settings re Daylight Savings Time sssse Channel Settings ssssssseemeee VCR Settings
54. l appear on the on screen display If you want to copy an entire tape try the EZ Copy feature The VCR will automatically rewind both tapes before and after copying and eject both tapes when finished see page 11 Dual Deck VCR User s Guide SONILLAS Ad OO Follow these steps to set the default Copy Settings for your Dual Deck VCR 1 OPEN MAIN MENU Press MENU 2 SELECT COPY SETTINGS Press 1 1 gt Copy Settings 2 Playback Settings Record Edit Settings 3 ADJ UST COPY SETTINGS Channel Settings he a VCR Settings Press 1 2 3 or 4 to set each of the following Timer Recording qued qum 1 Comm Free Copy 5 Please refer to page 26 Move EE MENU Quit 2 EZ Copy On Turns EZ Copy on When you press COPY TAPE the VCR will automatically rewind both decks copy the tape in Deck 1 to Deck 2 rewind both decks again COPY SETTINGS and eject the tapes Plus EZ Copy adjusts SComm ee Coy the record speed to avoid running out of 2 EZ Copy tape before copying is complete see 3 Speed Matching note on Complete Program Record 4 Copy Audio Insert below Off Turns EZ Copy off LA Speed Matching On Automatically sets the Deck 2 record speed to match the Deck 1 play back speed recommended for best copy quality Off Allows the Deck 2 record speed to be set independently of the Deck 1 playback speed Turn Speed Matching off only if you want to record two or more SP tapes onto one SLP tape You must
55. m dfr ildSs OLNV f no channels were found in your area the VCR will alert you and then display the Channel Settings menu see page 40 e If Auto Setup was unable to detect the time the VCR will alert you and then display the Manual Clock Set menu see page 38 1 Getting Started TV VIEW REMOTE CONTROL SETUP GO VIDEO Pressing the TV key puts the remote control in TV mode Some or all of the highlighted keys will be able to control your television NOTE When the remote is in TV mode it WILL NOT operate the VCR Press VCR to restore normal VCR functionality Follow these steps to program the remote control to operate many brands of television 1 TURN ON TELEVISION Press POWER on your television ENTER CODE Press and hold the TV key on the VCR remote control while entering the 2 digit code for your brand of television with the 0 9 keys see table below If there is more than one code for your brand of television try them all until one works BRAND CODE S IO ELE TV 4 19 Emerson E TV 21 pita c acean abono ous odo TV 4 10 JM Gerente tee T EE TV 11 eSATA TIERE TO TV 08 18 iamoldsiabme R TV 4 06 Rate TV 4 28 Miagnavoxeeet t TV 04 Milites Sta TV 13 Newsan S America TV 27 Noblex S America TV 25 Banasomicmm S TV 12 24 RG Aaa UU TV 07 29 GEN Giver TV 01 14 15 23 EIO TE TY lt 05 20 Sharpe TW se OZ 6 22 SO e eee
56. n arrow keys to select it then press CLEAR To exit the Select Event screen press MENU Complete Program Record CPR adjusts the recording speed to make sure you won t run out of tape before the Timer Recording is complete With Record Speed set to Auto the VCR will begin recording in SP It will then calculate how much time is remaining on the tape and adjusts the record speed to SLP if necessary If there is not enough room to record the entire show the VCR will record in SLP until the end ofthe tape is reached Dual Deck VCR User s Guide This Chapter will show you how to use the 8 Scene Editor and the On Screen Titler to make your own home movies Follow these steps to use the 8 Scene Editor to assemble the best scenes from your home movies press 1 Copy Settings 2 Playback Settings 3 Record Edit Settings 4 Channel Settings 5 VCR Settings 6 Timer Recording 7 Language Langue W IEE gt Sel MENU Quit RECORD EDIT SETTINGS 1 Dual Recording 2 Date Time Stamp 3 Deck 1 Rec Source 4 Deck 2 Rec Source 5 3 8 Scene Edit List 6 Setup Titler Message V Move Sel MENU Quit Begin End 1 8 To Select Scene SCENE For Begin And End CLEAR To Correct COPY TAPE To Make A Tape MENU To Quit NOTE While there are scenes in the Edit List you cannot eject the source tape in Deck 1 with the remote 10 INSERT SOURCE TAPE Insert your source tape original footage
57. nit cover or back There are no serviceable parts inside Refer servicing to qualified personnel only CUIDADO Para prevenir incendio riesgo de choque o interferencia enfadosa use solamente los accesorios recomendados Para prevenir electrochoque no use este enchufe polarizado con un cord n de extensi n toma de corriente o cualquier otra toma a menos que los dientes puedan ser completamente insertados para prevenir exposici n de los dientes Para reducir el riesgo de descarga el ctrica no remueva la cubierta o la parte posterior del VCR Dentro del VCR no hay partes que requieren servicio Dir jase solamente a per sonal calificado cuando requiera servicio ATTENTION Pour viter les incendis risque de chocs ou interf rences f cheuses employer seulement les accessoires recommand s CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Pour viter les chocs lectriques ne pas employer cette prise polaris e avec une rallonge une prise de courant ou une autre sortie de courant a moins que les lames peuvent tre ins r es a fond pour l exposition des lames Pour r duire les risques de chocs lectriques ne pas retirer le couvercle ou l arri re du module Il n y a pas de pi ce utilisable l int rieur Ne faire effectuer l entretien que par un personnel q
58. o track on tapes in Deck 1 This setting is necessary to hear sound tracks recorded using Copy Audio Insert see page 21 Deck 2 Hi Fi On The VCR will play the Hi Fi audio track on tapes in Deck 2 Off The VCR will play the linear mono audio track on tapes in Deck 2 This setting is necessary to hear sound tracks recorded using Copy Audio Insert see page 21 Dual Playback Seq Sequential Tapes will play in se quence i e Deck 1 will play then Deck 2 will play This is useful when watching a movie that includes two tapes Loop Tapes will play in a continuous loop until you press STOP ma on the deck in Play This is useful for continuous playback of training or sales tapes Normal Each deck will play independently default setting Auto Play Rewind Play Tapes without a record safety tab will play automatically when you insert them Rew All tapes will rewind automatically when the end of the tape is reached Both Tapes will both play and rewind automatically Off Tapes will neither play nor rewind automatically COMMERCIAL ADVANCE Please refer to page 23 SONILLAS AIVAAV Id 4 Play RECORD This Chapter will show you how to record television programs and set recording preferences INSERT TAPE Insert a VHS tape with a record safety tab into Deck 1 or Deck 2 SET RECORD SPEED Press the SP SLP key to set the record speed to SP Standar
59. r again until you press STOP ma This can be used for continuous recording of security cameras Dual Deck VCR User s Guide Follow these steps to set the default Record Settings for your Dual Deck VCR press 1 Copy Settings 2 Playback Settings 3 Record Edit Settings 4 Channel Settings 5 VCR Settings 6 Timer Recording 7 Language Langue ME Move gt Sel MENU Quit RECORD EDIT SETTINGS 1 Dual Recording 2 Date Time Stamp 3 Deck 1 Rec Source 4 Deck 2 Rec Source 5 8 Scene Edit List 6 Setup Titler Message Biv Move gt Sel MENU Quit NOTES H e e If you set Dual Recording to Sequential and set the Record Speed to SLP you can record forup to 12 hours with T 120 tapes Loop recording is not available when Commercial Advance is active i e when Mark Commer cials is setto Y es If Date Time Stamp is set to Cont the On Screen Display and menu system will be disabled Press STOP ms on the recording deck to restore normal on screen functions OPEN MAIN MENU Press MENU SELECT RECORD EDIT SETTINGS Press 3 ADJUST RECORD EDIT SETTINGS Press 1 2 3 4 5 or 6 to set the following 1 Dual Recording Sequential Tapes will record in sequence i e the VCR will record over the entire tape in Deck 1 then over the tape in Deck 2 and then stop see note below Loop Tapes will record in a continuous loop i e the VCR will record over the ent
60. re receiving channels from antenna Cable Specifies that you are receiving channels from cable Auto Channel Search Automatically searches for all available channels and stores them in memory When finished the VCR will display the lowest channel found Add Remove Channel Use the 0 9 keys to enter the channel number you wish to add or remove then press the right arrow key to add or remove the channel Show Weak Channels Yes Channels with weak signal strength will be displayed instead of being replaced with a blue screen No A blue screen will appear when a weak channel is received Channel Audio Stereo Enables stereo sound when avail able otherwise reverts to mono Mono Enables mono sound Use when connecting the VCR to a mono output device such as a monitor SAP Second Audio Program often used to transmit a second language SAP appears on the front panel display if it is available TV SAP Outputs mono from the left channel and SAP from the right channel Simulcast Plays the audio signal from the rear line inputs usually connected to a stereo system Dual Deck VCR User s Guide Follow these steps to customize the functionality of the Dual Deck VCR including Child Lock Remote Eject Front Panel Display O n Screen Display and RF Output Channel press o 1 Copy Settings 2 Playback Settings 3 Record Edit Settings 4 Channel Settings 5 gt VCR Settings 6 Timer Recordin
61. replace your obsolete outlet Do not defeat the safety purpose of the polarized plug POWER CORD PROTECTION Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the product PROTECTIVE ATTACHMENT PLUG The product is equipped with an attachment plug having overload protection This is a safety feature See Instruction M anual for replacement orresetting of protective device If replacement of the plug is required be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug AlddVvs OUTDOOR ANTENNA GROUNDING If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA 70 ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT NEC ELECTRIC SERVICE EQUIPMENT GROUND CLAMPS NEC SECTION 810 21 POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC NATIONAL ELECTRICAL CODE NEG ART 250 PART H provides information with regard to proper grounding ofthe mast and supporting structure grounding of the lead in wire to
62. s playing press to visually search backward Review In the menu system press to return to the previous menu NOTE 10 11 12 STOP EJECT m Press once to stop the tape in the active deck or press twice to eject the tape In the menu system press to move the blinking selection arrow down PLAY gt Press to play the tape in the active deck While a tape is playing or recording press to pause the tape in the active deck In the menu system press to move the blinking selection arrow up FAST FORWARD rr While the VCR is stopped press to fast forward the tape in the active deck While a tape is playing press to visually search forward Cue In the menu system press to make selections FRONT AUDIO VIDEO INPUT LINE 1 Connect to the composite video yellow and stereo audio outputs white and red of an external component such as a camcorder or videogame using RCA cables Use the white input for mono sources TANVd LNOHXMd Line Input Labels Throughout the menu system the front audio video input is referred to as Line 1 or L1 and the rear audio video input is referred to as Line 2 or L2 To change these labels to match the components you have connected see page 35 2 Quick Tour The following is an overview of the front panel 1 DECK 1 STATUS INDICATOR Lights to show you that Deck 1 is active Also graphically displays the status of the tape in Deck 1 e g Stop
63. s when the time is A M turns off when the time is P M DECK 2 PLAY RECORD SPEED Shows you the current playback SP LP or SLP or record speed SP or SLP for Deck 2 8 Dual Deck VCR User s Guide The following is an overview of the On Screen Display OSD NOTE 6 Play Deck 1 0 00 00 SP Sequential Play Source 1 Fri Jan 12 2001 TV VIEW WO CON m 12 34 PM DATE AND TIME When the TV View is set to Channel Line 1 or Line 2 the date and time are displayed at the bottom of the screen RECORD SOURCE When the TV View is set to Deck 1 or Deck 2 the Deck 1 and Deck 2 record source are displayed at the bottom of the screen DECK 1 PLAY RECORD SPEED Shows you the current playback SP LP or SLP or record speed SP or SLP for Deck 1 DECK 1 COUNTER POSITION Shows you the current tape counter position or time remaining on the tape in Deck 1 as set by the CLK CTR key DECK 1 STATUS Shows you the status of the tape in Deck 1 e g Stop Play Rewind Fast Forward etc TV VIEW Shows you the input source you are currently watching Channel Deck 1 Deck 2 Line 1 or Line 2 DECK 2 STATUS Shows you the status of the tape in Deck 2 e g Stop Play Rewind Fast Forward etc DECK 2 COUNTER POSITION Shows you the current tape counter position or time remaining on the tape in Deck 2 as set by the CLK CTR key DECK 2 PLAY RECORD SPEED Shows you the c
64. seu O1 YWITD S59Jd Buttpf ena Jesi 5umes 9019 puy sten Jaw daa 1S0138 TIM SONILIAS TIV IEN SONILLAS AHOLO V 13538 no nNaw PS mow Ny mut a v een E mut a v word Z sBumas A102e4 s y ET SONLLLAS Q32NVAQV WND 01 NNAW Te Sc vc m ui It Of rg eS ad nL OW Wd SZ zt tooz Sny 80 ZT T HLNOW 13S omg Loan OTUD WUT o 6z 8z 9z za r er ar ST rt e i d S 2 wnO NNAW S sow Ny ue 104 6 0 SN Le ae Jauueu 3es 90 9 WOOHT WdOE OT 1007 204 euoz aui 80 ZT T HLNOW 13S 395 pop ony sbuwes qubiea Auenue w 92019 38s SONILI3S 32015 paps ETEEN WH 3no NNAW S sow Ny PIE sGumes paouenpy W H sb6umes A203 SUP NC UE ETT TORRES JY W H Aide usas PON WC Aejdsiq jaued W H alg ajoway SSS ONSE A207 PID t 10 SI T LN3AB 123135 ano nN3W Ps ang uey 404 6 040 UG dn 4D 02215 oipny jauuey gt on sjauueyo 422M MOUS jeuueu ppv peas jouueu ony anos j uuey re SONILL3S THNNVH2 WNO NNAW 3281105 uva15 32ejes IUIL POW 2 4V 8 OI 1 2 TV 3I 87 G 5nnuiigsseeennoONI 1333YYY 68LISVEZTO ZAXMA nysabdouwjaf1y6 p2qe ZA XMANLSYOd ON WIA fIH943098V H l L SOVSS3IW YF LLL dNLIS iino o1 NNAW adel y JeEW OL JdYL AdOD 9991105 ERR Anio pug puy ul6eg 404 3N39S u S 198195 OL B T 3nO nN3W les Spo abessow Joni dmas 30 VPI auser ony a2unos zu z pea ony anos Y TPA J
65. ssage and exit the menu system ON SCREEN TITLER 1 2 3 Deck 2 Rec Source Auto 5 SAVE YOUR MESSAGE 6 T V Move gt Sel MENU Quit 6 INSERT TAPE press 6 Insert a tape with a record safety tab in Deck 2 You must use Deck 2 to record your Titler Message SETUP TITLER MESSAGE 7 START RECORDING ABCDEFGHIJ KLMNO PQ RSTUVWX Start any record function e g Record One YZ abcdefghijkImnopqrstu Touch Record Copy or Timer Record vwxyz 0123456789 AAAEEEI RTO eee ae 8 RECORD TITLER MESSAGE tke gt Move ec You can overlay the title on your video for up to CLEAR Correct MENU Quit g 20 seconds in 5 second increments Press SCEN E TITLE 1 to 4 times to record your Titler Message for 5 10 15 or 20 seconds respec tively NOTE You must be recording a video signal when you record the Titler Message i e you cannot record a title without also recording a picture Dual Deck VCR User s Guide COMMERCIAL ADVANCE This Chapter will show you how to use COMMERCIAL ADVANCE to skip commercials during playback of recordings and remove marked commercials from copied tapes If you have ever wanted to watch TV without commercials COMMERCIAL ADVANCE is for you The first step is to mark groups of commercials while recording a TV show press 1 Copy Settings 2 3 Playback Settings RecordEdit Gettings Channel Settings VCR Settings Timer Recording Language Langue
66. t the tuner channel without simulcast see page 17 Dual Deck VCR User s Guide The following are the technical specifications for your Dual Deck VCR VIDEO SYSTEM 1 2 inch VHS system 4 rotary head helical scanning FM azimuth luminance chrominance converted sub system phase shift TELEVISION SYSTEM NTSC type color signal EIA standard 525 lines 60 fields AUDIO TRACK Normal 1 track Hi Fi 2 track TAPE WIDTH 12 7 mm 1 2 inch TAPE SPEED SP 33 35 mm s SLP 11 12 mm s PLAY RECORD TIME 1 180 tape SP 3 hours SLP 9 hours FF REW TIME T 120 tape lt 2 minutes HEADS Video DA 4 rotary heads Audio 2 rotary heads Hi Fi 1 stationary head Linear Control 1 stationary head Erase 1 full track 1 audio track VIDEO Input RCA Type 75 ohms unbalanced 1 V P P x2 Output RCA Type 75 ohms unbalanced 1 V P P Horiz Res Monochrome more than 230 lines S N Ratio Better than 43 dB AUDIO Input AUDIO IN RCA 8 dbm 47K ohms x2 Output AUDIO OUT RCA 8 dbm 1 5K ohm TV Tuner 181 channel frequency synthesized VHF input Ch 2 Ch 13 UHF input Ch 14 Ch 69 VHF amp UHF one input Cable Ch 1 125 75 ohm unbalanced F type connector S N Ratio Better than 68 dB Hi Fi WOW amp FLUTTER Less than 0 005 Hi Fi RF MODULATION Channel 3 or 4 FREQUENCY RESPONSE 20 20 000 Hz Hi Fi POWER REQUIREM ENT 120V AC 60 Hz 32 watts max
67. tandard Time Central Selects Central Standard Time Mountain Selects Mountain Standard Time Pacific Selects Pacific Standard Time Alaska Selects Alaska Standard Time Hawaii Selects Hawaii Standard Time Clock Set Channel Auto Automatically searches for a local channel broadcasting the time via XDS Extended Data Services Ch If you know of a station in your area that broadcasts time information you can set the Auto Clock Set channel manually Use the 0 9 keys to set the desired channel usually PBS Line 1 Allows the clock to be set from an audio video device attached to your VCR s front line input Line 2 Allows the clock to be set from an audio video device attached to your VCR s rear line input SONILLAS 55012 OLNV Appendix B Custom Settings MANUAL CLOCK SETTINGS If Auto Clock Set is not available in your aea follow these steps to set the clock manually see notes below befoe proceeding 1 Copy Settings 2 Playback Settings 3 Record Edit Settings 4 Channel Settings 5 gt VCR Settings 6 Timer Recording 7 Language Langue v Move gt Sel MENU Quit VCR SETTINGS 1 Child Lock 2 Remote Eject 3 Panel Display 4 Screen Display 5 RF Output Channel 6 Clock Settings 7 Advanced Settings V Move gt Sel MENU Quit CLOCK SETTINGS gt Set Clock Manually Daylight Savings Auto Clock Set Time Zone Clock Set Channel Use 0 9
68. to mark the beginning and ending points of scenes see page 19 While recording press to superim pose On Screen Titles see page 22 SEARCH INDEX While the VCR is in Stop Play Fast Forward or Rewind press to display the Search Index M enu see page 28 While a tape is recording places an Index mark on the tape see page 27 SET TIMER Press to open the Timer Recording menu see page 16 SHUTTLE RING While a tape is playing rotate the Shuttle Ring forward or backward to gradually increase or decrease the playback speed SKIP While a tape is playing press 1 5 times to skip ahead 1 minute at a time up to 5 minutes While the VCR is copying press 1 5 times to skip edit remove the next 1 5 minutes see page 20 SLOW While a tape is playing press to play the tape in slow motion at variable speeds SP SLP Press to set the record speed to SP Standard Play or SLP Super Long Play SLP is three times longer than SP STILL F ADV While a tape is playing or recording press to pause the tape in the active deck While a tape is paused press repeatedly to advance the tape one frame at atime STOP EJ ECT m Press to stop the tape in the active deck Press twice to eject the tape In the menu system press to move the blinking selection arrow down TRK VA AUTO While a tape is playing press to manually adjust tracking white lines on the screen Press AUTO to resume automatic tracking TV Pr
69. u must set the Clock before you can program a Timer Recording see page 38 Dual Deck VCR User s Guide 6 SET LENGTH Use the 0 9 keys or UP DOWN RIGHT arrow keys to set the length of the event in hours and SET LENGTH H 0 9 0 1 Aug 2001 10 30PM Boom minutes Su Mo Tu We Th Fr Sa Set Length H ee S Enter the hours as a 1 digit number e g for 3 6 7 8 e o uq n i sb od Gu e db Tg one hour press 1 19 20 21 22 23 24 25 Set Length M 26 27 28 29 30 31 Enter the minutes as a 2 digit number e g for Lime hin Deck Auto 30 minutes press 30 to set hours use 0 9 and minutes 7 SET TYPE Press 1 2 3or 4 or use the UP DOWN arrow keys to set how often the event will be re continued SET TYPE 1 4 1 1 Aug 2001 10 30PM 1H00M corded Su Mo Tu We Th Fr Sa 1 1 Time 3 4 The event will be recorded once jo D 17 18 2 Mo Fr 24 25 The event will be recorded Monday through 31 Friday Ch10 Deck 1 Auto 3 Weekly The event will be recorded once a week press 0 0 to set type 4 Always The event will be recorded every day SET SOURCE 14 1 1 Aug 2001 10 30PM 1H00M 8 EE Su Mo Tu We Th Fr Sa Press 1 2 3 or 4 or use the UP DOWN arrow 1 9 8 d keys to set the record source If you are using a 5 6 7 8 9 10 1 cable box see note below 125 7135714 715 16 17 18 19 20 21 22 23 24 25 1 Ch 26 27 28 29 30 31 Records from TV First press 1 to select this 1 Time
70. ualifi USER INSTALLER CAUTION Your authority to operate this FCC certified equipment could be voided if you make changes or modifications not expressly approved by the manufacturer who is responsible for compliance with Part 15 FCC rules NOTE TO CATV SYSTEM INSTALLER This reminder is provided to call the CATV system installer s attention to Article 820 40 of the National Electronic Code that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical COPYRIGHT NOTICE Federal law provides severe civil and criminal penal ties for the unauthorized reproduction distribution or exhibition of copyrighted motion pictures and vid eotapes Title 17 United States Code Sections 501 and 506 This symbol is intended to alert the user to the presence of uninsulated dangerous volt age within the product s enclosure that may be of sufficient magnitude to constitute risk of fire or electric shock This symbol is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying this product Copyright 2003 GoVideo All rights reserved pida cT iii 1 GETTING STARTED 1 UNPACKING 12 2 tee eire that a 1 Basic Connections ssssssssee memes 2 AUTO Setup i c te ret dite ei rcd i d CPG ARR RE 3 Remote Contro
71. urrent playback SP LP or SLP or record speed SP or SLP for Deck 2 10 DISPLAY MESSAGES The On Screen Display often displays feedback on the status of your Dual Deck including Copy messages Timer Recording error messages etc AV idsida NAAAIS NO Press DISPLAY to manually turn the OSD on and off 2 Quick Tour ER This Chapter will show you how to copy tapes with your Dual Deck VCR To set up the Commercial Free Copy feature please see Chapter 8 INSERT SOURCE TAPE Insert the tape you want to copy in Deck 1 INSERT TARGET TAPE Insert the tape you want to copy to in Deck 2 e Make sure the tape has a record safety tab or it will eject when you press COPY TAPE COPY YOUR TAPE Press COPY TAPE The Copy indicator will light on the front panel display and the VCR will begin copying from Deck 1 to Deck 2 O Follow these steps to copy a tape from Deck 1 to Deck 2 Z e POWER A 2 O U SCENE TITLE TV VIEW Uu en GO VIDEO NOTES OPTIONS WHILE COPYING To pause press COPY TAPE The Copy indicator will blink on the front panel display While paused you can reposition the source tape in Deck 1 e g to fast forward over a commercial see page 20 To stop copying select Deck 2 then press STOP ma The Dual Deck VCR cannot duplicate copy protected tapes If you try to copy a protected tape the message Tape is Copy Protected wil
72. ust Do If Service is Required If service under this warranty is required contact the GoVideo Customer Service Depart ment at 800 736 7679 or go online to http www govideo com to determine the nearest authorized GoVideo service center Other Warranty Coverage Commercial Industrial or Educational use has the same warranty coverage as stated in this warranty What are the Exceptions This warranty does not cover 1 Normal maintenance service such as video head cleaning 2 Damage from misuse abuse neglect or accident natural disasters or Acts of God 3 Cabinetry decorative parts A C adapters knobs or buttons 4 The foreign country use of this product 5 GoVideo product which has been electronically or mechanically modified in any way or incorporated into other products 6 Installation and setup service adjustments 7 Owner instruction Your O wner s Guide provides information regarding operating instructions and user controls For additional informa tion contact your authorized GoVideo dealer Go Video is not responsible for any shipping handling or insurance charges This Exclusive Limited Warranty excludes all incidental and consequential damages Some states do not allow the exclusion of incidental and consequential damages so the above exclusion may not apply to you ALL IMPLIED WARRANTIES INCLUDING IMPLIED WARRANTIES OF MERCHANTABIL ITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DUR
73. w The VCR will cue forward and begin playing the first preview You can either watch the preview or press SEARCH IN DEX to cue to the next preview and so on The VCR actually cues slightly past the preview and then rewinds and plays the preview While the VCR is rewinding you can override preview skip see sidebar 6 Find Start of Movie The VCR will cue past all previews and pause at the start of the movie Press PLAY to start the movie In Find Next Preview mode you can still advance to the start of a movie Simply press STOP ms then press SEARCH INDEX then press 6 to select Find Start of Movie MOVIE ADVANCE is a trademark of SRT Inc A J erry Iggulden invention licensed in association with Arthur D Little Enterprises Inc Dual Deck VCR Users Guide APPENDIX ADVANCED CONNECTIONS This Chapter will show you how to connect additional components such as a cable box stereo or satellite receiver to your Dual Deck VCR Follow these steps to change the RF Output Channel fom 3 the default to 4 in the menu system This featu takes the place of the standard Ch3 4 rear panel switch 1 Copy Settings 2 Playback Settings 3 Record Edit Settings 4 Channel Settings 5 gt VCR Settings 6 Timer Recording 7 Language Langue V Move Sel MENU Quit VCR SETTINGS 1 Child Lock 2 Remote Eject 3 Panel Display 4 Screen Display EE RF Output Channel 6 Clock Settings 7 Advanced
Download Pdf Manuals
Related Search
Related Contents
Oricom UHF2100 Radio User Manual 1 USER`S MANUAL Imation Travan 20/40 GB NS40 Bryant 311AAV Furnace User Manual Manual de instrucciones trilingüe (Español, Inglés y Francés) teleprompt+ for mac user manual 1_2_0 Copyright © All rights reserved.
Failed to retrieve file