Fisher-Price BOUNCE 'N PLAY ACTIVITY DOME 79534 User's Manual
Contents
1. Bounce n Play Activity Dome Model Number 79534 Instructions Please save these instructions for future reference Adult assembly is required Tool needed for assembly Phillips Screwdriver Use only for a child who is unable to push up on hands and knees pull up or sit unassisted Fisher Price N WARNING e Never leave child unattended e To prevent suffocation from entrapment use only the Fisher Price pad provided Never use additional padding or mattress To prevent falls use only for a child who is unable to push up on hands and knees pull up or sit unassisted To prevent strangulation Never place items with a string such as hood strings or pacifier cords around a child s neck Never place this product near a window where cords from blinds or drapes can strangle a child e Never place product on an elevated surface e Never move or carry this product with a child in it This product is not designed to be used as a carrier and will become unstable e The Bounce n Play Activity Dome must be fully erected prior to each use e Never use plastic shipping bags or other plastic film as mattress covers They can cause suffocation Consumer Information Occasionally a consumer may experience a problem with one of our products If this should happen please call us toll free rather than return this product to the store Usually we can solve the problem on the telephone or by sending y2. Portability e Grasp both sides of a base wire e While lifting the product up slightly pull both sides of the base wire outward to remove the base wire from the groove in each frame Base Wire e Rotate the base wire up e Repeat this procedure to fold the other base wire Fisher Price Inc a subsidiary of Mattel Inc East Aurora NY 14052 U S A 9 S E ss Carry Straps Fasten the carry straps The pad is machine washable Wash the pad separately in cold water on the gentle cycle Do not use bleach Tumble dry separately on low heat and remove promptly The fabric frame and toys may be wiped clean using a mild cleaning solution and a damp cloth www fisher price com If you have any questions about this product In CANADA Mattel Canada Inc 6155 Freemont Blvd Mississauga Ontario L5R 3W2 Questions 1 800 567 7724 In GREAT BRITAIN Mattel U K Ltd Helpline 01628 500302 In AUSTRALIA Mattel Australia Pty Ltd 658 Church Street Locked Bag 870 Richmond Victoria 3121 Australia Consumer Advisory Service 1 800 800 812 valid only in Australia 79534 B 79534 0920 Printed in Hong Kong 1998 Mattel Inc All Rights Reserved and designate U S trademarks of Mattel Inc
3. k nut into each corresponding hexagonal e Insert the metal canopy stay through the canopy tunnel opening on the back of the frame Assembly e Tighten the screws with a Phillips screwdriver Do not over tighten e Repeat this procedure to attach the other ends of the frame tubes to the frame on the other side of the base M6 Lock Nut 4 M6 x 1 s Screw 4 Position the base wires around the base so that the ends point upward and are in front of the lower holes in a frame e Insert an M6 x 1 s screw through each base wire and into the frame Fit an M6 lock nut into each corresponding hexagonal opening on the back of the frame e Tighten the screws with a Phillips screwdriver Do not over tighten e Repeat this procedure to attach the other ends of the base wires to the frame on the other side of the base Metal Canopy Stay M5 x 1 16 Screw 2 M5 Lock Nut 2 Position one end of the metal canopy stay against the upper hole in a frame Insert an M5 x 1 5 screw through the hole in the cover Fit the end of the screw through the hole in the metal canopy stay and into the hole in the frame Push on the cover to insert and snap the tab on the cover into the slot in the frame Make sure you hear a snap Fit an M5 lock nut into the corresponding hexagonal opening on the back of the frame Tighten the screw with a Phillips screwdriver Do not over tighten Repeat thi
4. ou replacement parts Please call Fisher Price Consumer Affairs toll free at 1 800 432 KIDS 8 AM 6 PM EST Monday through Friday Hearing impaired consumers using TTY TDD equipment please call 1 800 382 7470 Or write to Fisher Price Consumer Affairs 636 Girard Avenue East Aurora New York 14052 Parts Metal Canopy Stay us LY Ow Plastic Mesh Cover Stay YL M5 x 15 1 Screw 2 M5 Lock Nut 2 MG x 1 s Screw 8 M6 Lock Nut 8 SHOWN ACTUAL SIZE Assembly IMPORTANT Before each use or assembly inspect this product for damaged hardware loose joints missing parts or sharp edges DO NOT use if any parts are missing or broken Contact Fisher Price for replacement parts and instructions if needed Never substitute parts Button Hole 1 Plastic Mesh Cover Stay Frame Middle Hole Middle Hole aun er 7 Frame Tube Frame Tube e Position the ends of the frame tubes against the middle holes in a frame Position the base upright on a flat surface e Locate the end of the base with the mesh cover Insert the entire plastic mesh cover stay into one of the button holes in the mesh cover e Be sure to tuck the plastic mesh cover stay away from the button holes in both sides of the mesh cover Hexagonal Canopy Tunnel Tube Hien OON NS M6 x 1 Screw 4 M6 Lock Nut 4 e Insert an M6 x 1 s screw through each frame tube and into the frame Fit an M6 loc
5. s procedure to attach the other end of the metal canopy stay and the remaining cover to the frame on the other side of the base Assembly To Unfold Canopy Fasteners Carry Straps Position the product on a flat surface Unfasten the carry straps Base Fastener e Lift the canopy Fasten the pad fasteners to the base fasteners e Attach the toys to the canopy fasteners Assembly is now complete but Bounce n Play Activity Dome is not ready for use Please refer to the Use instructions page 7 steps 3 and 4 Sides of Base Wire Grasp both sides of a base wire Pull both sides of the base wire outward and then let the base wire rotate down Note If the base wire does not freely rotate down pull the sides of the base wire further outward Use Using the Canopy E Canopy Up Lift the product up slightly so that the base wire snaps into the groove in each frame Make sure you hear a snap e Repeat Use Steps 2 and 3 to unfold the other base wire e Adjust the canopy up or down Using the Mesh Cover Mesh Cover Up Zi LE Canopy Up e Adjust the canopy and mesh cover up e While holding the mesh cover up fasten the e Push down on the product to be sure the base wires are in the correct position The base wires should rest in the groove in each frame zipper closed Use To Fold for
Download Pdf Manuals
Related Search