Home

Fisher & Paykel OB60SL11DEPX1 User's Manual

image

Contents

1. to make sure the shelf is the right way up slide it horizontally back along the side racks ensuring it is level and the stop notch is facing down To replace a telescopic sliding shelf position it so that the front bar is toward you as shown Check that the sliding frame is not extended Check the guard rail as shown to make sure the shelf is the right way up Shelf positions Position the shelf so that it is level and the rear shelf tag at the back of the sliding frame rests behind the side rack wire as shown Then push the sliding shelf all the way to the back of the oven until the front shelf tag drops into place behind the side rack wire For your safety the wire shelves and telescopic sliding frames are built together as one unit and are not separable This means that when placed properly on the side racks the slides will prevent the wire shelves from tilting when pulled towards you To prevent the tags from lifting off the side racks take care to slide the shelves forward horizontally Guard rail Stop Notch Front shelf tag Replacing a wire shelf 4 CONDITION THE OVEN Front bar lt L L Guard rail Rear shelf tag Replacing a telescopic sliding shelf It is important to condition your oven before using it for cooking and baking Conditioning will burn off any manufacturing residues and ensure that you get the best results right from the start 1
2. display will flash 24 Hr When the oven is first switched on at the wall i2 Hr 2a Press the right scroll button to scroll between 24 Hrand i2 Hr 2b Press the select button to confirm 1G 13 To change the time within the user preference menu C4Hr Press and hold the left and right scroll 4 buttons together for 3 seconds to enter the user preference menu The display will either show 72 Hror 24 Hr Press the select V button to confirm The display will flash Follow steps 2 5 left to set the time At step 2a you also now have the ability to scroll between 24 Hr i2 Hr and GFF turns the display off Refer to the User guide to learn more about this feature 3 Press the left and right scroll 4 gt ae 2 30 Co piz e io button for 2 seconds To unlock press and hold the KI gt v x Rotisserie indicator see Using the Timer indicator Rotisserie in the see Using the User guide timer Control lock indicator see if lit if lit Locking the control panel Rotisserie is Timer is in use counting down if lit Control panel is locked Locking the control panel 6 amp 6 l A m To lock press and hold the select J gt DOOR lt gt cancel X button for 2 seconds Door lock indicator Scroll if lit Door is open when Self Clean function selected See Using the Self Clean function in User guide Cooking time indicator see Automa
3. free 24 7 1300 650 590 technician to service your product GB toll free 24 7 0845 066 2200 need replacement parts or accessories IE toll free 24 7 1800 625 174 want to register your product www fisherpaykel com 2029 59 Press the select button to confirm The timer will then begin to count down If you want to check the time of day press the cancel x button once Press the right scroll button to scroll back to the timer 590480A 12 12
4. it will count down in seconds min sec You can set the timer for up to 23 hours 59 minutes Important The timer does NOT turn the oven off 00 00 08 00 00 30 Select the timer amp by pressing 2 Press the select button to 3 Set the time by pressing the the right scroll button once confirm scroll 4 buttons The timer amp indicator will appear The display will flash to indicate Holding the buttons down and the colon will flash the timer is ready to be set will speed up the scrolling To modify the timer setting Make sure the display shows the remaining time counting down Press the select V button Press the scroll buttons to set a new time Press the select button to confirm To cancel the timer setting Make sure the display shows the remaining time counting down Press the cancel x button until the display shows the time of day and the timer amp indicator disappears When the set time is up The display will show 7 04 and a tone will sound every 15 seconds Press any button to stop the tone sounding The display will revert to showing the time of day FOR MORE INFO For detailed information on the see your User guide other features of your oven For warranty information see your Service and warranty booklet If you see your Service and warranty booklet or contact us have any questions or comments NZ toll free 24 7 0800372273 needa Fisher amp Paykel authorized AU toll
5. Make sure you have removed ALL the cable ties used to secure the shelving during transit Make sure you have set the clock 3 Make sure all the shelves are fitted FUNCTION TEMPERATURE TEMPERATURE R 4 Select the Bake function 5 Set the temperature to 200 C for 30 minutes While the oven is heating up the temperature halo Each function has a preset will glow red and the temperature indicator will temperature and so the oven alternately show the actual and set temperatures will start heating at the Bake When the oven has reached set temperature a tone preset temperature of 180 C will sound and the halo will turn white The halo will glow white TEMPERATURE FUNCTION 200 a MN 7 Leave the temperature at 200 C 8 When you have finished turn the function dial to for 5 minutes Off LJ The halos will go out m The halo will remain white m There will be a distinctive smell and a small amount of smoke during the conditioning of the oven This is normal but make sure the kitchen is well ventilated during the conditioning m Once cooled wipe out the oven with a damp cloth and mild detergent and dry thoroughly FUNCTION N Fan Grill 6 After 30 minutes is up select the Fan Grill function USING THE TIMER AUN You can use the timer at any time even if you are not using the oven If the time is more than an hour the display will count down in minutes hr min If it is less than an hour
6. QUICK START GUIDE Built in oven NZ AU GB IE Keep this document handy for easy reference For detailed information on the other features of your oven see your User guide Fisher amp Paykel Before using your oven make sure you read the full User guide with special attention to the Safety and warnings section For contact information or if you require service assistance or replacement parts see the end of this document or your Service amp warranty booklet YOUR OVEN Control panel Oven vent louvres Step down oven wire shelf Oven light Telescopic sliding shelf x2 Side rack Oven wire shelf cove O O Oven door and handle Oo ON AU AUN OB60SL11DCPX1 Oven seal OB60SL11DEPX1 Accessories 10 Meat probe 11 Grill rack 12 Smokeless grill tray 13 Deep Roasting dish 14 Flat baking tray THE CONTROL PANEL Function indicators see Oven functions Function dial Temperature indicator Temperature SETTING THE CLOCK You set the clock within the user preference menu To learn more about the user preference menu refer to your User guide Note If you do not wish to set the time initially when the oven is first switched on at the wall press the cancel x button to exit the clock setting If you want to set the clock later follow the steps under To change the time The
7. tic cooking in User guide Automatic cooking time is set aa Meat probe indicator see Using the meat probe in User guide if lit Meat probe is in use display will alternate between probe set temperature and internal temperature of the meat Stop time indicator see Automatic cooking in User guide if lit Automatic stop time is set 4 Press the select button to buttons to set the time confirm FIRST USE Your oven comes with one wire shelf two telescopic sliding shelves and a drop down wire shelf m The following shows you how to remove and reposition the shelves to your preferred position We recommend you then condition the oven 1 REMOVE ALL CABLE TIES amp PACKAGING HOLDING THE SHELVING IN PLACE 2 REMOVE SHELVES FROM THE OVEN 1 Remove all the shelving taking special care with the telescopic sliding shelves 2 To remove a telescopic sliding shelf grip it at the front making sure you are gripping the wire shelf and the sliding frame together lift upwards and pull it out of the oven For your safety the wire shelf and telescopic sliding frame are built together as one unit and are not separable continued over gt FIRST USE 3 REPLACE SHELVING IN YOUR PREFERRED POSITIONS We recommend placing the telescopic sliding shelves on positions 2 and 4 as these are the shelf positions most often used To replace a wire shelf check the guard rail as shown

Download Pdf Manuals

image

Related Search

Related Contents

- Spystation  NEMO/AGRIF Nesting tools User's Guide - Forge  MANUEL D` INSTRUCTIONS & PIÈCES  apri - ICS Silvio Boccone  Honeywell HE225A User's Manual  

Copyright © All rights reserved.
Failed to retrieve file