Escalade Sports B3200W User's Manual
Contents
1. 100 cotton soft cloth only Glass cleaner Clean backboard using only a 100 Cotton soft cloth and glass cleaner Clean glass as you would clean household windows Strong cleansers will damage backboard and void warranty RIM Only hang from the rim briefly to regain balance or avoid injuring others Release the rim as soon as safely possible Rims are not warranted for any defects other than workmanship Torn back plates damaged springs bent rings damaged eye bolts and torn or distorted rim supports result from hanging on the rim and are not warranted The goal should not be cranked over 10 Adjustments of the goal should be done under adult supervision When attempting slam dunk activity you should always wear a mouth guard to avoid dental injury B3200W PARTS LIST Key Part Description Key Part Description SD OO O O BUN 10 11 N 3M 6838 00 1A 7002 00 2B 6093 01 2B 6095 01 3M 6245 00 1A 6992 00 1B 6222 01 1B 6218 01 3M 6274 00 3M 6834 00 1A 6993 00 4L 7637 00 3M 6467 00 8S 6566 01 2M 6160 00 4A 708 1 00 4L 7830 00 2B 6094 01 1B 6215 01 1B 6781 00 3M 6466 00 7B 6391 00 6A 7129 00 Not Used 6 X 6 Tube Plug Post Assembly 1 2 Flat Washer 1 2 13 Nyloc Locknut 1 1 4 Dia Plastic Washer Upper Board Arm 1 2 13 X 10 Hex Bolt Grade 5 1 2 13 X 11 Hex Bolt Grade 5 1 X 2 Tube Plug 1 9 16 x 3 5 32 Tube Plug Lower Board Arm Goalrilla Decal Actuator Cap Pivot Tube Actuator S2. and are not warranted Shipping charges both ways Note Any merchandise shipped to Escalade Sports collect will be refused Dealer service charges labor charges and travel expenses associated with replacement of repair of warranty item WARRANTY DISCLAIMERS ANY IMPLIED WARRANTIES ARISING OUT OF THIS SALE INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION ESCALADE SPORTS SHALL NOT BE LIABLE FOR LOSS OF USE OF THE PRODUCT OR OTHER CONSEQUENTIAL OR INCIDENTAL COSTS EXPENSES OR DAMAGES INCURRED BY THE CONSUMER OF ANY OTHER USE Some states do not allow the exclusion or limitation of implied warranties or consequential or incidental damages so the above limitations or exclusions may not apply to you LEGAL REMEDIES This warranty gives you specitic legal rights and you may also have other rights which may vary from state to state WARRANTY GUIDELINES IS REQUIRED FOR ALL WARANTY CLAIMS 1 Proof of Purchase original retail purchaser is required for all warranty claims 2 Call or write Escalade Sports to receive a Return Authorization and determine specitic needs Phone 1 888 USA GOAL Warranty Dept Or Write Escalade Sports at Escalade Sports RO Box 889 Evansville IN 47706 Attn Warranty Dept Or E mail us at customerservice escaladesports com CARE INFORMATION BACKBOARD CARE AND MAINTENANCE Items needed to clean backboard
3. nut 4 See Figure 6 Tighten both bolts 8 securing Lower Arm 11 Note Tighten bolts snug but do not over tighten Board Arms must pivot freely 7 Ifthe two Tube Plugs 10 are not already installed insert them into open ends of Lower Arm 1 1 It may be necessary to use a hammer or rubber mallet to tap plug in 9 a fi 7 gt B A S DRAIN HOLES of S ON BOTTOM 10 Locate hardware needed to mount pole to anchor bolts You will need eight flatwashers 37 four lock washers 36 four hex nuts 35 and four thread protectors 34 Note Do not remove the nuts you installed in step 2 11 Put a flat washer 37 on each anchor bolt Lift post onto anchor system and secure with one flatwasher 37 one lock washer 36 and one hex nut 35 for each anchor bolt Tighten all four hex nuts tight Safety Stop 14 With at leastthree capable people raise the backboard assembly up and have the fourth attach Lower Board Arms to lower mounting holes on backboard using two bolts 20 two step bushings 22 shipped already installed four plasticwashers 5 four flat washers 3 and two thin hex jam locknuts 47 See Figure 10 Note DO NOT over tighten these bolts This is a pivot point Snug is tight enough 15 Attach Upper Board Arms to upper mounting holes on backboard using two bolts 20 two step bushings 22 shipped already installed four plastic
4. out voids in concrete Immediatelv use a level to level and square anchor plate to playing surface Clean off any concrete that may be on exposed threads Note The bottom four nuts will be forever embedded in concrete The top four nuts remain on bolts and are used for leveling Let concrete stand for a MINIMUM of 72 hours ASSEMBLY INSTRUCTIONS Day 5 IMPORTANT Nylon washers 5 adequately space painted parts at all pivot points Neglecting the use of these washers will result in rusted parts NOTE All board arms are made of rectangular tubing Tightening hardware too tight mav damage tubing and make adjustment of svstem difficult 1 Using Allen Wrench 45 provided attach Post Brackets 44 to outside of brackets on back of Post Assembly 2 Secure with two Flat Head Screws 46 two Flat Washers 26 and two Locknuts 33 in each Bracket 44 See Figure 3 2 Slide Actuator Sleeve 15 over Actuator 16 and place Actuator Cap 13 on top Slide Pivot Tube 14 in hole near the top of Actuator until equal amounts stick out on both sides of Actuator See Figure 4 NOTE If necessary use a hammer or rubber mallet to tap in Spacer Lay Pole 2 on its side on two padded saw horses Secure Actuator 16 to Pole 2 using one bolt 19 split lockwasher 18 washer 3 and two plastic washers 5 o thread into each side of Actuator See Figure 4 Tighte
5. D326128 Additional patents may be pending One or more of the listed patents and or pending patents may cover specific product 2008 Escalade Sports Ad SAFETV INSTRUCTIONS A FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND OR PROPERTY DAMAGE Owner must ensure that all players know and follow these rules for safe operation of the system a SAFETY INSTRUCTIONS Ak FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY PROPERTY DAMAGE AND WILL VOID WARRANTY _AWARNING FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND OR PROPERTY DAMAGE Owner must ensure that all players know and follow these rules for safe operation of the system Owner must ensure that all players know and follow these rules for safe operation ofthe system To ensure safety do not attempt to assemble this system without following the instructions carefully Proper and complete assembly use and supervision is essential for proper operation and to reduce the risk of accident or injury A high probability of serious injury exists if this system is not installed e Only hang from the rim briefly to regain maintained and operated properly balance or avoid injuring others Release the rim as soon as safely possible If using a ladder during assembly use extreme caution During play especially when performing dunk type activities keep player s face away from the backboard rim and net Ser
6. ION TIMELINE Prior to anchor system and goal assembly call utility services for location of underground utility lines before you dig Vertical main post assembly is a two part process Day 1 Complete Anchor System Installation PART 1 Day 5 Instructions Below Day 2 4 Allow concrete to cure PART 2 Complete Goalrilla assembly instructions Requires four adults for ANCHOR SYSTEM INSTALLATION INSTRUCTIONS Day 1 7 WARNING Before digging hole for anchor svstem check buried power gas water and telecommunication lines Failure to do so could result in serious or fatal injury Contact your local utility company if unsure Items needed not included 9 80 Ib bags of concrete I post hole digger optionol I 1 1 15 16 wrench 1 concrete form see note after step 2 wheel barrow garden hose level tape measure Note For best results with less vibration anchor system should be independent of court If pouring concrete for both at same time add an expansion joint in between Note When digging hole if you hit rock and cannot dig through contact a contractor 1 Overhang when adjusted to 10 ft 31 1 2 Determine the location of the anchor system The proper location is as close to the court without making contact as shown in Figure 1 This however is a general rule If you need to locate the anchor system in a location other than this
7. MODEL NO Goalrilla Il The Toughest Basketball System on the Planet BASKETBALL SYSTEM OWNER S MANUAL 1 Read this manual carefully before starting assembly Read each step completely before beginning each step 2 Some smaller parts may be shipped inside larger parts Check inside all parts and cartons before assembling or ordering parts 3 To make assembly of your basketball system easier use the Hardware Identifier on page 3 and 4 to identify and sort all fasteners Check all cartons for kits All hardware is not located in one kit 4 Do not tighten hardware until instructed to do so If hardware is tightened too soon mounting holes may not align and parts may not easily fit together Leave locknuts slightly loose until you are instructed to tighten them Please Do Not Return This Product to the Store Contact Escalade Sports customer service department at Phone 1 888 USA GOAL Toll Free l Fax 1 866 873 3536 Toll Free l E mail basketball escaladesports com Mailing Address Escalade Sports PO Box 889 Evansville IN 47706 Please visit our World Wide Web site at www escaladesports com ON LINE TROUBLE SHOOTING TECHNICAL ASSISTANCE ON LINE PARTS REQUESTS FREQUENTLY ASKED QUESTIONS ADDITIONAL ESCALADE SPORTS PRODUCT INFORMATION ESCALADE S PORTS Escalade Sports products may be manufactured and or licensed under the following patents 6419596 6179733 5919102 5071120 4798381 4424968
8. ed please call for details prior to the return of any photographs or merchandise This limited lifetime warranty is expressly in lieu of all warranties expressed or implied including warranties of merchantabilitv or fitness for use Escalade Sports does not assume or authorize any person or representative to assume for us any other liability in connection with the sale of our products The remedy of repair or replacement stated above is Escalade Sports exclusive remedy Escalade Sports will not be liable for any other damages or expenses which may incur including but not limited to incidental or consequential damages Escalade Sports assumes no other obligations or liability on the part of the purchaser and Escalade Sports neither assumes nor authorizes any other person to assume for it any other liability in connection with the goods sold This warranty shall not apply in any manner to parts or accessories not manufactured by Escalade Sports NOT COVERED BY THIS WARRANTY Any merchandise subjected to abuse negligence improper installation vandalism acts of God alteration of product or any other events beyond the control of Escalade Sports Paint or rusted parts Paint kits will be available to assist in normal maintenance Rims are not warranted for any defects other than workmanship Torn back plates damaged springs bent rings damaged eyebolts and torn or distorted rim supports result from hanging on the rim
9. ious injury could occur if teeth face come in contact with backboard rim or net 4 people are recommended for this operation Seat the pole sections properly if applicable Failure to do so could allow the pole sections to separate during play Before digging contact utility company to locate underground power cables gas and water Do not slide climb or play on pole lines Ensure there are no overhead power lines within 20 ft 7m radius of pole location When adjusting height keep hands and Climate corrosion or misuse could result in system failure fingers away from moving parts If technical assistance is required contact the manufacturer Minimum operational height is 6 6 1 98m to the bottom of backboard Do not allow children to adjust system During play do not wear jewelry rings watches necklaces etc Objects may entangle in net Most injuries are caused by misuse and or not following instructions Use caution when using this system Keep water and organic material away from pole Pole can rust and fail Once a month check pole and all metal parts WARN N G for rust Completely remove rust and repaint with exterior enamel If rust has penetrated Failure to observe this warning any steel part replace that part immediately may cause property damage Affixed to backboard Check system before each use for loose ini hardware signs of rust and instability Repair and o
10. leeve Actuator Height Decal 1 2 Split Lock Washer 1 2 13x 1 Hex Bolt 1 2 13x2 1 4 Hex Bolt Rim Pad 5x 5 Step Bushing Backboard Assembly j jJ DD a a Ky N DD a Not Used 2B 6237 00 3M 6833 00 A 6328 01 1B 6782 00 3F 6010 00 2S 6421 00 1B 6788 00 2B 6238 00 3M 6469 00 2B 6097 01 2B 6099 01 2B 6098 02 2S 6494 01 2B 6096 01 15 6152 00 7B 6255 00 4A 6550 01 2L 7038 04 25 6794 00 7B 6292 00 1B 6597 01 2B 6242 00 3 8 Flat Washer Goal Spacer Plate Pre Installed Goal Assemblv 3 8 16X 1 3 4 Carriage Bolt Net Rim Cover Plate 8 X 1 2 Self Tapping Screw 3 8 16 Nyloc Locknut 5 8 Thread Protector 5 8 11 Hex Nut 5 8 Split Lock Washer 5 8 Flat Washer Anchor Plate 5 8 11X 18 J Bolt 3 X 40 Rebar Pull Pin Actuator Handle This Manual Post Bracket Allen wrench 3 8 16 X 1 Flat Head Screw 1 2 13 Nyloc Jam Locknut RoR KR N NN ND 33 60 27 Pre Installed 11 2L 7038 04 12 2L 7038 04
11. n bolts tight nsert Pole Cap 1 into top of Pole 2 It mav be necessary o use a hammer or rubber mallet to tap Cap in 5 Attach lower arm 11 to Pole 2 as shown in Figure 5 using a bolt 8 two flatwashers 3 four plastic washers 5 and hex nut 4 Note make sure Goalrilla lettering is right side up Do NOT tighten bolt 8 at this time 8 Attach Upper Arm 6 to Pole 2 as shown in Figure 7 using a bolt 7 two flatwashers 3 four plastic washers 5 and hex nut 4 Note Tighten bolts snug but do not over tighten Board Arms must pivot freelv 9 If the two Tube Plugs 9 are not already installed insert them into open ends of Upper Arm 6 It may be necessary to use a hammer or rubber mallet to tap plug in PLACING THE POST ON THE ANCHOR SYSTEM REQUIRES AT LEAST FOUR CAPABLE ADULTS POLE WILL WANT TO LEAN WHILE ATTEMPTING TO STAND IT UP ON ANCHOR BOLTS BE SURE CONCRETE HAS BEEN ALLOWED TO CURE FOR AT LEAST 3 DAYS 12 Slide Actuator Crank 42 onto shaft on the bottom of Actuator 16 Line up hole in shaft with hole in Actuator Crank and insert Pull Pin 41 to secure See Figure 9 13 To aid in the assembly of the backboard lower the backboard by turning the Actuator Crank until the lower arm makes contact with the Safety Stop 6 Secure Actuator 16 to Lower Arm 11 using one bolt 8 two flatwashers 3 four plastic washers 5 and one hex
12. nufacture is free from defects in material and workmanship THIS WARRANTY IS VOID IF THE PRODUCT HAS BEEN DAMAGED BY ACCIDENT UNREASONABLE USE NEGLIGENCE IMPROPER SERVICE FAILURE TO FOLLOW INSTRUCTIONS PROVIDED WITH THE PRODUCT OR OTHER CAUSES NOT ARISING OUT OF DEFECTS IN MATERIAL OR WORKMANSHIP Subject to proper installation and normal use Escalade Sports warrants subject to the limitations below to the original retail purchaser all structural components of the Goalrilla System to be free of defects in material and workmanship for the duration of ownership by the original retail purchaser Merchandise must be shipped prepaid with a copy of proof of purchase to Escalade Sports factory for examination to determine if the basketball system needs to be repaired or replaced Any labor costs travel expenses and any other changes involved in the removal installation or replacement of the defective repaired parts from to your Goalrilla System will be the purchaser s responsibility Shipping charges for replaced or warranted merchandise sent back to the customer from Escalade Sports factory must be prepaid by the customer in advance If not the replacement shipment will be sent out collect Escalade Sports reserves the right to examine photographs or physical evidence of merchandise claimed to be defective and to recover said merchandise prior to authorization of warranty claims A Returned Goods Authorization number may be requir
13. r serious injury before each use Never play on damaged Only hang from the rim briefly to regain balance or avoid injuring equipment others Release the rim as soon as safely possible Rim height adjustments should be made under parental supervision Wear a mouthguard when playing to avoid Wear a mouth guard when playing to avoid dental injuries dental injuries During play do not wear jewelry rings watches necklaces etc 4L 8090 00 Objects may entangle in net HARDWARE IDENTIFIER 1 1 4 Dia Plastic Washer Hex Bolt I 1 2 Flat Washer 2 Pieces 16 Pieces Cotter Pin 1 Piece 1 2 13 Nylon Lock Nut 3 Pieces 1 2 13 Nylon Jam Thin Lock Nut 4 Pieces 18 1 2 Split Lock Washer 2 Pieces 24 Pieces 5 8 Flat Washer 8 Pieces 34 5 5 8 Thread Protector 4 Pieces 14 3 4 OD x 6 3 4 Spacer 1 Piece HARDWARE IDENTIFIER s Pr 3 8 16 8 x 1 2 Nylon Locknut Thread Forming Screw i 3 8 Flat Washer 4 Pieces Pieces 8 Pieces Total ieces Tota 4 Pieces Rim Kit 4 Pieces Post Kit 3 8 16 X 1 3 4 Carriage Bolt 46 4 Pieces TI These parts are located inside rim kit ent Flat Head Bolt 4 Pieces Q ET 3 8 16 Nylon Locknut 5 8 11 4 Pieces Hex Nut 12 Pieces 1 2 13 x 2 1 4 5 8 Hex Bolt Split Washer 4 Pieces 4 Pieces INSTALLAT
14. use the following dimensions as a guide 18 INCH MINIMUM CLEARANCE REQUIRED IN x Note A minimum of 18 rear clearance is required behind pole 2 Assemble anchor system as follows Thread nut 35 to bottom of threads on anchor bolt 39 insert threads of anchor bolt 39 through hole on anchor plate 38 and secure with nut 35 Repeat this step for the remaining anchor bolts See Figure 2 Note Each leg of anchor bolts should face the anchor bolt to the right See Detail A THESE NUTS USED FOR LEVELING Detail A Bottom View 9 e J ETD 5 16 Diameter lll Court Level j T Vi e Court op View A i i wer e O D 48 4 Rebar 40 2 O U 0 o 0 e Anchor Plate must be e square to your court so backboard will ele line up properly g 4 JIE 20 Diameter Note Using a concrete form for the top 4 of the concrete is recommended Cardboard forms can be purchased at some hardware and home stores or a wooden form can be constructed out of 2 x 4 s 3 Mix and pour concrete into hole Follow instructions on concrete bag Stop about 18 below court level A Insert four reinforcement bars 40 into concrete 8 apart creating a square in center on hole 5 Place form in desired location and finish pouring concrete up to court level 6 Push anchor system into concrete and agitate to work
15. washers 5 four flat washers 3 and two thin hex jam locknuts 47 See Figure 10 Note DO NOT over tighten these bolts This is a pivot point Snug is tight enough 20 Adiust unit to lowest position Use a tape measure to measure from the top of the rim to the playing surface Stick Height Decal 17 to back of Actuator 16 with the measured height mark aligned with bottom of Actuator Sleeve 15 See Figure 12 p G AD 16 Remove protective backboard covering and mount Goal Assembly 28 and Rim Pad 21 to Spacer Plate 27 and Backboard as shown in Figure 11 using four bolts 29 four washers 26 and four locknuts 33 Tighten fasteners finger tight leave them loose enough to level rim 17 Place a level across rim assemblv and adjust rim until it is level Finish tightening the four nuts A CAUTION NEVER USE RIM WITH COVERPLATE REMOVED 18 Attach Rim Cover Plate 31 using four screws 32 See Figure 11 19 Check all nuts and bolts everything is tightened properly Do NOT over tighten pivot points snug is tight enough 15 17 LIMITED LIFETIME WARRANTY This consumer warranty extends to the original consumer purchase of any Escalade Sports Product hereinafter referred to as the Product WARRANTY COVERAGE Escalade Sports warrants to the original Consumer Purchaser that any Product of its ma
Download Pdf Manuals
Related Search