EarthWay M30 User's Manual
Contents
1. Inc P O Box 547 Bristol Indiana 46507 USA EC DECLARATION OF CONFORMITY Machinery Directive amp Electromagnetic Compatibility Directives Herewith we declare that the machinery described below is in accordance with the relevant health and safety requirements of the EC Council Directives concerned with Machinery and Electromagnetic Compatibility No alterations are to be made to the machine without prior con sultation and approval of EarthWay Products Inc otherwise the Declaration may become inva lid This equipment must be commissioned used and maintained strictly in accordance with the operating and maintenance instructions issued with the machine Operators must be trained in accordance with the recommendations given in the operating and maintenance instructions 1s sued with the machine Description of Machine EarthWay M30 ATV 12 volt Broadcast Spreader Serial Number AS STAMPED ON MACHINE Date of Supply AS INVOICED DATE Relevant EC Council Directives Machine Directives 89 392 EEC and subsequent amendments Electromagnetic compatibility Directive 89 336 EEC and subsequent amendments Issued by Jeffrey Kendall on behalf of EarthWay Products Inc Signed by 4f od DO NOT RETURN TO DEALER FOR REPAIR Date 19 November 2003 EARTHWAY PRODUCTS INC 1009 Maple Street Position of Signatory Vice President P O Box 547 Sales amp Marketing Bristol IN 46507 FOR YOUR RECORDS Date Purchased Store Name ee Moun2. control prior to operation of the vehicle This allows repeatability to the stop without the need to look at the control while operating the vehicle C Establish the correct rate and then lock the stop in that position using the thumb wing nut on the setting control ASSEMBLY INSTRUCTIONS 1 Attach frames to hopper as shown using 4 1 4 20 x 1 1 2 bolts with lock nuts 2 Position the rate control assembly to either frame rail based on if the spreader is mounted to the front or the rear rack If on front mount the control to the left rail if on the rear mount on the right rail WARRANTY EARTHWAY guarantees this product to be free of defects in original workmanship and materials for a period of 90 days from sale to the original user If any defect develops during this period EARTHWAY will repair or replace this product at no charge provided the defect is not the result of mishandling or tampering and that this product is received at the factory with shipping charges prepaid For quicker service you may call EARTHWAY at 574 848 7491 or write and describe the nature of the defect and we will send repair parts to you Due to the corrosive nature of most fertilizers and ice melters EARTHWAY PROD UCTS INC makes no warranty or guarantee against corrosion failure on models with plated steel or painted steel frames Clean and dry your spreader well after each use Warranty covers parts only but not labor charges EarthWay Products
3. Operation and Assembly Manual for the EarthWay M30 12 volt ATV Broadcast Spreader TEREI H j i www EarthWay com Earth Way Electric Spreaders Model M30 1 Always wear protective clothing eyewear and dust mask to prevent contact with chemicals and other materials being ap plied with this machine 2 Remove any material in the hopper before lifting or detaching this machine from the vehicle 3 Care must be taken when lifting this machine so as not to cause personal injury or equipment damage Never attempt to in stall this machine to the vehicle alone Recruit the help of someone to assist when attaching and detaching this machine from the vehicle 4 Refer to the material packaging or the Material Safety Data Sheet for precautionary measures required when handling materi als to be applied 5 Before attaching this machine consideration must be given to the load capacity of the vehicle Refer to the owner s manual of the vehicle for rated load capacity Be sure to take into account the weight of this machine 20 Ibs and the weight of the material to be placed in the hopper when calculating the total load 6 Keep hands away from any spinning object How to operate safely A Read understand and follow all product label information provided on the material being applied B An adjustable solid stop is provided that allows the operator to adjust to the desired opening position on the rate setting
4. ded as a guide only Variations in physical characteris tics of material applied brisk walking speed 3 mph and roughness of ground surface may require slightly dif ferent spreader settings Due to the above conditions EARTHWAY PRODUCTS INC makes no warranty as to the uniformity of coverage actually obtained from the setting listed Earth Way Products Inc P O Box 547 Bristol Indiana 46507 574 848 7491 www earthway com HOW TO ORDER SPARE PARTS All spare parts listed herein may be ordered direct from the manufacturer EARTHWAY PRODUCTS INC Be sure to give the following information when ordering 1 Model Number 2 Part Number 3 Part Description Call 574 848 7491 or write for current prices N A Fasteners available at any local hardware store
5. opriate setting 6 Start the vehicle in motion and as you cross the starting line of the 50 feet move the rate lever to the open position against the stop Take care to be aware of what is going on around you maintaining con trol of the vehicle 7 Continue from the starting line with the unit spreading the material As you cross the finish line move the rate lever to the closed position 8 Stop the vehicle and note the width of the spread path that was just completed 9 Return to the start point and empty the remaining material from the hopper into your weighing con tainer and re weigh EarthWay Electric Spreaders Rate Setting Worksheet Desired Application Rate Ibs 1 000 sq ft To determine the desired application rate divide the area sq ft the bag should cover by the weight of the bag then multiply by 1 000 example 5000 sq ft 25 Ibs 005 x 1 000 5 Weight of Material Placed in Hopper Weight of Material Left in Hopper Weight of Material Used 50 Length of Test Area X Width of Spread Area Total Spread Area Divide the Weight of Material Used by the Total Spread Area Ibs sq ft Multiply the Ibs sq ft times 1 000 Ibs 1 000 sq ft Compare the results of your test to the desired application rate Adjust the rate setting stop accordingly and run through the test again Repeat this process until you have achieved the desired application rate The settings furnished on the Rate Setting Chart are inten
6. ting locations How to attach to your ATV Position the M30 centered on either the front or rear luggage rack on your ATV Next using the 2 included U Bolts con nect the rear cross bars to the luggage rack cross bar closest to l the seat or handlebars Using the two included Double J q Bolts attach the M30 to the luggage rack securing it to the outer most rail on the luggage rack Tighten all fasteners and cut any excessive bolt lengths that extend beyond the nuts on N the U amp J Bolts and smooth if necessary AN Prior to each use inspect the mounting hardware for loosening and the spreader to ensure the rigidity of the mount by tightening any loose hardware either on the Spreader or Luggage Rack mounts If rate settings are not available use the following procedure to calculate the setting 1 Determine how much material is to be applied per 1 000 sq ft 2 Measure off a distance of 50 feet preferably on a paved surface such as a parking lot 3 Weigh out enough of the material to be applied to fill the hopper at least half full Record the weight for future use 4 With the unit mounted on the vehicle and the hopper at least half full of the material to be spread posi tion the vehicle far enough before the beginning of the 50 foot test area so that the vehicle will achieve the desired speed before you reach the starting line 5 Set the rate setting stop at a position that you feel would be an appr
Download Pdf Manuals
Related Search