Dell B-DCX-4s Replacement Procedure
Contents
1. green 2 Use the screwdriver to loosen the captive screws for the blower assembly Figure 1 or Figure 2 On the DCX the screws are at the top and bottom of the assembly and on the DCX 4S they are on the left and right 3 Support the blower assembly from beneath Use the handle to remove the blower assembly Blower Assembly Replacement Procedure 3 53 1001804 01 DCX blower assembly FIGURE 1 DCX 4S blower assembly FIGURE 2 Blower Assembly Replacement Procedure 53 1001804 01 Replacing a blower assembly To replace a blower assembly 1 Orient the blower assembly and slide it into the chassis pushing firmly to ensure that it is seated 2 Verify that the power LED displays a green light 3 Use the screwdriver or your fingers to tighten the captive screws Blower Assembly Replacement Procedure 53 1001804 01 Blower Assembly Replacement Procedure 53 1001804 012. 53 1001804 01 January 31 2010 Blower Assembly Replacement Procedure Supporting PowerConnect B DCX4S Backbone and PowerConnect B DCX Backbone 53 1001804 01 LM VU Notes Cautions and Warnings NOTE A NOTE indicates important information that helps you make better use of your computer A CAUTION See the safety and regulatory information that shipped with your system For additional regulatory information see the Regulatory Compliance Homepage on www dell com at the following location www dell com regulatory_compliance CAUTION A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed DANGER A DANGER indicates a potential for property damage personal injury or death Information in this document is subject to change without notice 2009 Dell Inc All rights reserved Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc is strictly forbidden Trademarks used in this text Dell the DELL logo Inspiron Dell Precision Dimension OptiPlex Latitude PowerEdge PowerVault PowerApp Dell OpenManage and the YOURS IS HERE logo are trademarks of Dell Inc Intel Pentium and Celeron are registered trademarks of Intel Corporation in the U S and other countries Microsoft Windows Windows Server MS DOS and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United
3. States and or other countries Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products Dell Inc disclaims any proprietary interest in trademarks and trade names other than its own Regulatory Model Codes Brocade DCX 4S Brocade DCX 2 Blower Assembly Replacement Procedure 53 1001804 01 In this guide MROAUCHOR Ke AR ka o RR TE a TIME Sid IEMS reged occ ccc pen RR POR BN Bb ni 3 Removing a blower assemDly Lans none ae Kan ose mar Mm ag na nw 3 Replacing a blower assembly nan pn an ea AR ar Ra 5 Introduction This document provides instructions for replacing a blower assembly in the PowerConnect B DCX4S and the PowerConnect B DCX chassis ATTENTION To ensure continuous adeguate cooling for the PowerConnect B DCX maintain three operating blower assemblies at all times except for the brief period when replacing a blower assembly The PowerConnect B DCX4S can continue operating during the replacement if the second blower assembly is operating Time and items reguired The replacement procedure for each blower assembly takes less than 5 minutes The following items are reguired for the blower assembly replacement e Replacement blower assembly e Phillips 2 screwdriver Removing a blower assembly 1 Before removing a blower assembly verify that the other blower assemblies are functioning correctly The power LEDs should be steady
Download Pdf Manuals
Related Search