Home
Clarion DXZ525 User's Manual
Contents
1. gt button e Press the button to selects a station age What is Sirius Satellite Radio S RIUS Sirius is radio the way it was meant to be Up to 100 new channels of digital quality programming delivered to listeners coast to coast via satellite That means 50 channels of completely commer cial free music Plus up to 50 more channels of news sports and entertainment from names like CNBC Discovery SCI FI Channel A amp E House of Blues E NPR Speedvision and ESPN Sirius is live dynamic entertainment completely focused on listeners Every minute of every day of every week will be different All 50 commer cial free music channels are created in house and hosted by DJs who know and love the mu sic Do you like Reggae How about Classic Rock or New Rock Sirius has an array of choices spanning a vast range of musical tastes including the hits of the 50 s 60 s 70 s amp 80 s as well as Jazz Country Blues Pop Rap R amp B Bluegrass Alternative Classical Heavy Metal Dance and many others From its state of the art digital broadcasting fa cility in Rockefeller Center New York City Sirius will deliver the broadest deepest mix of radio entertainment from coast to coast Sirius will bring you music and entertainment programming that is simply not available on tra ditional radio in any market across the country It s radio like you ve never heard before So Get Sirius and Listen Up For more informa tion
2. Loading a CD 1 Press the OPEN button to access the CD SLOT behind the FLIP DOWN PANEL 2 Insert a CD into the centre of the CD SLOT with the label side facing up The CD plays automatically after loading Notes e Never insert foreign objects into the CD SLOT e If the CD is not inserted easily there may be an other CD in the mechanism or the unit may re quir e service Discs not bearing the EG mark and CD ROMs cannot be played by this unit Some CDs recorded in CD R CD RW mode may not be usable Loading 8 cm compact discs No adapter is required to play an 8 cm CD Insert the 8 cm CD into the centre of the insertion slot 3 Close the FLIP DOWN PANEL ACAUTION Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL Notes e If the FLIP DOWN PANEL does not open fully gently open with your hand After loading a CD always close the FLIP DOWN PANEL Listening to a CD already inserted Press the FUNC button to select the CD mode Play starts automatically If no CD is loaded in the unit NO DISC appears in the display Pausing play 1 Press the gt II button to pause play PAUSE appears in the display 2 To resume CD play press the gt II button again 16 DXZ525 eeina a CD Press the OPEN button to open the FLIP DOWN PANEL 2 Press the 4 to eject the CD Take it out from the ejected position 3 Close the FLIP DOWN P
3. CD SLOT CD insertion slot Major button operations when external equipment is connected to this unit When the CD MD DVD changer is connected For details see the section CD MD changer operations For the DVD changer refer to the Owner s Manual pro vided with the DVD changer DIRECT button e Designates the disc to be played RDM button Performs random play Also performs disc ran dom play when the button is pressed and held RPT button Performs repeat play When this button is pressed and held disc repeat play is performed BAND button Moves the next disc in increasing order SCN button Performs scan play for 10 seconds for each track Disc scan play is performed when the button is pressed and held lt 4 b gt button Selects a track when listening to a disc Press and hold the button for 1 second or longer to switches the fast forward fast back ward 11 button Plays or pauses a CD MD or DVD When the Sirius Satellite Radio is connected For details refer to the Owners Manual provided with the Sirius Satellite Radio FUNC button e Press the button to switch the operation mode among the SIRIUS mode etc SCN button e Performs category scan while in the SIRIUS mode When the button is pressed and held preset scan is performed DIRECT button Stores a station into memory or recall it di rectly while in the SIRIUS mode lt lt
4. Operating range 30 in all directions WwW Signal transmitter Remote control unit dre 2 re ia QRS a a BAND ISR A SEARCH PROG MUTE _ RDM RPT clarion A Inserting the Batteries 1 Turn the remote control unit over then slide the rear cover in the direction of the arrow 2 Insert the AA SUM 3 IECR 6 1 5V batteries that came with the remote control unit facing in the directions shown in the figure then close the rear cover Notes Using batteries improperly can cause them to explode Take note of the following points e When replacing batteries replace both batteries with new ones Do not short circuit disassemble or heat batteries e Do not dispose of batteries into fire or flames Dispose of spent batteries properly AA SUM 3 IECR 6 1 5V Batteries Rear cover 10 10 DXZ525 Functions of Remote Control Unit Buttons PE js SS ia sige Switches among radio SIRIUS tuner CD CD MD changer DVD changer and AUX Switches reception band Plays the first track Moves the next disc in Top play increasing order 4 w Increases and decreases volume in all modes lt 4 p gt Moves preset Moves tracks up and down channels up and When pressed and held for 1 second down Fast forward fast backward No function Switches between playback and pause Turns mute on and off Recalls ISR radio station in memory
5. lights in the display and the current track is repeated 2 To cancel repeat play press the RPT button again RPT goes off from the display and normal play resumes 20 DXZ525 Disc repeat play After all the tracks on the current disc have been played disc repeat play automatically replays the current disc over from the first track This function continues automatically until it is can celled 1 Press and hold the RPT button for 1 second or longer DISC and RPT light in the dis play and disc repeat play starts 2 To cancel disc repeat play press and hold the RPT button again DISC and RPT go off from the display and normal play resumes on the current track Random play Random play selects and plays individual tracks on the disc in no particular order This function continues automatically until it is cancelled 1 Press the RDM button RDM lights in the display and random play begins 2 To cancel random play press the RDM but ton again RDM goes off from the display and normal play resumes Disc random play The disc random play selects and plays indi vidual tracks or discs automatically in no par ticular order This function continues automati cally until it is cancelled 1 Press and hold the RDM button for 1 sec ond or longer DISC and RDM light in the display and disc random play starts 2 To cancel disc random play press and hold
6. 1 kHz 100 dBA Dynamic Range 1 kHz 95 dB Harmonic Distortion 0 01 Channel Separation 1 kHz 85 dB Notes Audio Maximum Power Output 200 W 50 W X 4 ch Continuous Average Power Output 18 W X 4 into 4 Q 20 Hz to 20 kHz 1 THD Bass Control Action 60 Hz 100 Hz 200 Hz 15 dB Treble Control Action 10 kHz 15 kHz 12 dB Line Output Level CD 1 kHz 2V General Power Supply Voltage 14 4 V DC 10 8 to 15 6 V allowable negative ground Current Consumption Less than 15 A Speaker Impedance 40 4 Q to 8 Q allowable Weight Source unit 3 30 lb 1 5 kg Weight Remote control unit 1 oz 30 g including battery Dimensions Source unit 7 Width X 2 Height X 6 1 8 Depth 178 W X 50 H X 155 D mm Dimensions Remote control unit 1 3 4 Width X 4 5 16 Height X 1 1 8 Depth 44 W X 110 H X 27 D mm e Specifications and design are subject to change without notice for further improvement 66 DXZ525 11 SP CIFICATIONS Tuner FM Plage de fr quence 87 9 107 9 MHz Sensibilit utilisable 9 dBf Seuil de sensibilit 50dB 15 dBf S lectivit de canal de substitution 70 dB S paration st r o 1 kHz 35 dB R ponse en fr quence 3 dB 30 Hz 15 kHz Tuner AM Plage de fr quence 530 kHz 1710 kHz Sensibilit utilisable 25 UV Lecteur CD Syst me Syst me audionum rique de disque compact Disques
7. The top function plays from the first track track No 1 of the disc Press the DIRECT button 1 to 6 with the same number as the MD playing If an MD is not loaded in a slot of MD changer pressing the DIRECT button corresponding to its disc number is invalid Scan play Scan play locates and plays the first 10 seconds of each track on a disc automatically This func tion continues on the disc until it is cancelled The scan play is useful when you want to select a desired track 1 Press the SCN button to start track scan ning SCN lights in the display 2 To cancel the scan play press the SCN but ton again SCN goes off from the display and the current track continues to play Disc scan play Disc scan play locates and plays the first 10 seconds of the first track on each disc in the cur rently selected CD MD changer This function continues automatically until it is cancelled Disc scan play is useful when you want to select a desired CD MD 1 Press and hold the SCN button for 1 sec ond or longer DISC and SCN light in the display and disc scan play starts 2 To cancel disc scan play press the SCN button again DISC and SCN go off from the display and the current track continues to play Repeat play Repeat play continuously plays the current track This function continues automatically until it is cancelled 1 Press the RPT button RPT
8. visit siriusradio com DXZ525 7 5 DCP The control panel can be detached to prevent theft When detaching the control panel store it in the DCP DETACHABLE CONTROL PANEL case to prevent scratches We recommend taking the DCP with you when leaving the car Removing the DCP 1 Press the FUNC button for 1 second or longer to turn off the power POWER 2 Deeply push in OPEN button to unlock the flip down panel If the flip down panel does not open fully gen tly open it with your hand OPEN button HOLD FLAP ACAUTION Be sure to close the HOLD FLAP for safety when removing the DCP Attaching the DCP 1 Insert the right side of the DCP into the main unit 2 Insert the left side of the DCP into the main unit ACAUTION The DCP can easily be damaged by shocks After removing it be careful not to drop it or subject it to strong shocks If the FLIP DOWN PANEL is kept open the DCP may drop due to vibration of the car This results in damage to the DCP So close the FLIP DOWN PANEL or remove the DCP to store into the case The connector connecting the source unit and the DCP is an extremely important part Be careful not to damage it by press ing on it with fingernails screwdrivers etc Note e If the DCP is dirty wipe off the dirt with a soft dry cloth only DXZ525 9 6 REMOTE CONTROL Receiver for remote control unit
9. 6 mode is reached 3 Press the gt or lt d button to select B lt F coe Aajusting the fader Turninng the ROTARY knob clockwise or Press the A M button and select FAD counterclockwise to select the frequency The factory default setting is B lt F 60 gt Ad justment 60 100 200 Hz 4 Press the gt or lt d button to select B lt Q 1 gt 2 Turning the ROTARY knob clockwise em phasizes the sound from the front speakers turning it counterclockwise emphasizes the sound from the rear speakers Turninng the ROTARY knob clockwise or The factory default setting is FAD 0 Adjust counterclockwise to select the Q curve ment range F12 to R12 The factory default setting is B lt Q 1 gt Ad 3 When the adjustment is complete press the justment 1 1 25 1 5 2 A M button several times until the function 5 When the adjustment is complete press the mode is reached A M button several times until the function mode is reached DXZ525 13 Basic Operations Adjusting the Z Enhancer Plus 1 Press the Z E button and select the Z En hancer Plus mode to adjust 2 Press the A M button and turning the RO TARY knob clockwise adjusts in the direc tion tuning it counterclockwise adjusts in the direction O When B BST 0 selected you can adjust the bass in the range of 3 to 3 O When IMPACT 0 selected you can adjust the bass and treble in the range o
10. Loudness indication Stereo indication e Preset channel indication 1 to 6 Disc number indication 1 to 6 5712 CD MD DVD changer mode indication DISC Disc indication Scan indication D Repeat indication ED Random indication LCD Screen In extreme cold the screen movement may slow down and the screen may darken but this is normal The screen will recover when it returns to normal temperature 8 DXZ525 2 PRECAUTIONS 1 When the inside of the car is very cold and the player is used soon after switching on the heater moisture may form on the disc or the optical parts of the player and proper playback may not be possible If moisture forms on the disc wipe it off with a soft cloth If moisture forms on the optical parts of the player do not use the player for about one hour The conden sation will disappear naturally allowing normal operation This equipment has been tested and found to com ply with the limits for a Class B digital device pur suant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a resi dential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communica tions However there is no guarantee that inter ference will not occur in a particular installation If
11. Veuillez d plier et vous r f rer la page suivante Cerci rese de desplegar y de leer la pagina siguiente DXZ525 4 3 CONTROLS LES COMMANDES CONTROLES Source unit Appareil pilote Unidad fuente El sie3uel AN RDM With the FLIP DOWN PANEL opened Ouvrez le PANNEAU RABATTABLE Apertura del PANEL ABATIBLE Note Be sure to unfold this page and refer to the front diagrams as you read each chapter Remarque Veuillez d plier cette page et vous r f rer aux sch mas quand vous lisez chaque chapitre Nota Cuando lea los cap tulos despliegue esta p gina y consulte los diagramas 4 NOMENCLATURE Note Be sure to read this chapter referring to the front diagrams of chapter 3 CONTROLS on page 5 unfold Names of the Buttons and their Functions OPEN button Deeply push in OPEN button to unlock the flip down panel ROTARY knob e Adjust the volume by turning the knob clock wise or counterclockwise Use the knob to perform various settings FUNC button Press the button to turn on the power Press and hold the button for 1 second or longer to turn off the power Switches the operation mode among the ra dio mode etc DIRECT button Stores a station into memory or re
12. canales 1 kHz 35 dB Respuesta en frecuencia 3 dB 30 Hz a 15 kHz Sintonizador de AM Gama de frecuencias 530 a 1710 kHz Sensibilidad til 25 uV Reproductor de discos compactos Sistema Sistema audiodigital de discos compactos Discos utilizables Discos compactos Respuesta en frecuencia 1 dB 10 Hz a 20 kHz Relaci n se al ruido 1 kHz 100 dBA Gama din mica 1 kHz 95 dB Distorsi n arm nica 0 01 Separaci n entre canales 1 kHz 85 dB Notas Audio Salida m xima de potencia 200 W 50 W X 4 canales Salida media continua de potencia 18 W X 4 con 4 Q de 20 Hz a 20 kHz 1 de distorsi n arm nica total Acci n de control de graves 60 Hz 100 Hz 200 Hz 15 dB Acci n de control de agudos 10 kHz 15 kHz 12 dB Salida de linea reproductor de discos compactos 1 kHz 2V Generales Tensi n de alimentaci n 14 4 V CC permisible de 10 8 a 15 6 V negativo a masa Consumo de corriente Menos de 15 A Impedancia de los altavoces 4 Q permisible de 4 a 8 Q Peso Unidad fuente 3 30 lb 1 5 kg Peso Controlador remoto 1 oz 30 g incluyendo la pila Dimensiones Unidad fuente 7 An X 2 Al X 6 1 8 Prf 178 An X 50 Al X 155 Prf mm Dimensiones Controlador remoto 1 3 4 An X 4 5 16 Al X 1 1 8 Prf 44 An X 110 Al X 27 Prf mm e Las especificaciones y el dise o estan sujetos a cambio sin previo aviso por motivo de mejor
13. justment range 6 to 6 O When EXCITE is set 3 Press the gt or lt d button to select T lt F EXCITE BAL 0 gt FAD 0 gt LOUD aa OFF 3 Last function mode Turninng the ROTARY knob clockwise or O When CUSTOM is set counterclockwise to select the frequency BASS gt TREB 3 BAL 0 3 FAD 0 gt The factory default setting is T lt F 10 gt Ad s justment 10 kHz 15 kHz se 5 i DEAR Last Neon med 4 When the adjustment is complete press the O When Z OFF is set A M button several times until the function BAL 0 3 FAD 0 3 LOUD OFF 3 Last mode is reached function mode Acos ng the balance Press the A M button and select BAL 2 Turning the ROTARY knob clockwise em phasizes the sound from the right speaker turning it counterclockwise emphasizes the Adjusting the bass Gain Frequency Q curve This adjustment can be performed when the Z Enhancer Plus is set to CUSTOM 1 Press the A M button and select BASS sound from the left speaker 2 Turning the ROTARY knob clockwise em The factory default setting is BAL 0 Adjust phasizes the bass turning it counterclock ment range L13 to R13 wise attenuates the bass 3 When the adjustment is complete press the The factory default setting is B lt G 0 gt Ad A M button several times until the function justment range 6 to
14. the DISP button each time you press and hold the number 6 of the DI RECT buttons for 2 seconds or longer the reception area switches from inside the USA to outside the USA or from outside the USA to inside the USA Any station preset memories are lost when the reception area is changed Listening to the radio 1 Press the FUNC button and select the radio mode The frequency appears in the display 2 Press the BAND button and select the radio band Each time the button is pressed the ra dio reception band changes in the following order FM1 gt FM2 3 FM3 gt AM gt FM1 3 Press the lt d or gt button to tune in the desired station Tuning There are 3 types of tuning mode available seek tuning manual tuning and preset tuning Radio Operations Seek tuning 1 Press the BAND button and select the de sired band FM or AM If MANU is lit in the display press and hold the BAND button for 1 second or longer MANU in the display goes off and seek tun ing is now available 2 Press the lt d or P gt button to automatically seek a station When the gt button is pressed the station is sought in the direction of higher frequencies if the lt d button is pressed the station is sought in the direction of lower frequencies Manual tuning There are 2 ways available Quick tuning and step tuning When you are in the step tuning mode the fre quency changes one
15. utilisables Disques compacts R ponse en fr quence 1 dB 10 Hz 20 kHz Rapport signal bruit 1 kHz 100 dBA Plage dynamique 1 kHz 95 dB Distorsion harmonique 0 01 S paration des canaux 1 kHz 85 dB Remarques Audio Puissance de sortie maximale 200 W 50 W X 4 canaux Puissance de sortie continue moyenne Tl 18 W X 4 4 W 20 Hz 20 kHz DHT 1 D Plage de variation des graves 60 Hz 100 Hz gt 200 Hz Y 15 dB o Plage de variation des aigus 10 kHz 15 kHz 12 dB Sortie de ligne CD 1 kHz 2V Donn es g n rales Tension d alimentation 14 4 V CC 10 8 V 15 6 V admissible masse n gative Consommation Inf rieure 15 A Imp dance de haut parleurs 4 Q 4 Q 8 Q admissible Poids Appareil pilote 3 30 lb 1 5 kg Poids T l commande 1 oz 30 g avec la pile Dimensions Appareil pilote 7 largeur X 2 hauteur X 6 1 8 profondeur 178 L X 50 H X 155 P mm Dimensions T l commande 1 3 4 largeur X 4 5 16 hauteur X 1 1 8 profondeur 44 L x 110 H x 27 P mm e La conception et les sp cifications sont sujettes modification sans pr avis pour des raisons d am lioration DXZ525 67 11 ESPECIFICACIONES Sintonizador de FM Gama de frecuencias 87 9 a 107 9 MHz Sensibilidad til 9 dBf Sensibilidad a 50 dB de silenciamiento 15 dBf Selectividad de canal alternativo 70 dB Separaci n entre
16. 2002 2 D C Clarion Co Ltd All Rights Reserved Copyright 2002 Clarion Co Ltd Printed in China Imprim en Chine Impreso en China PE 2509B 280 7813 00 Clarion esoAuciao Owner s manual Mode d emploi Manual de instrucciones DXZ525 AM FM CD PLAYER WITH DVD CD MD CHANGER CONTROL RADIO AM FM LECTEUR CD AVEC COMMANDE DE CHANGEUR DVD CD MD RADIO REPRODUCTOR AM FM DE DISCOS COMPACTOS CON CONTROL DE CAMBIADOR DE DVD DISCOS COMPACTOS MINIDISCOS LE2INET Clarion Sees E PE ds y DIGITAL AUDIO Thank you for purchasing this Clarion product Please read this owner s manual in its entirety before operating this equipment After reading this manual be sure to keep it in a handy place e g glove compartment Check the contents of the enclosed warranty card and keep it carefully with this manual This manual includes the operating procedures of the CD changer MD changer AUX DVD and PHONE MUTE connected via the CeNET cable The CD changer and MD changer have their own manuals but no explanations for operating them are described Contents T FEATURES nent 2 2 PRECAUTIONS 3 Flip Down Panel 4 Handling Compact DISCS 4 3 CONTROLS 5 4 NOMENCLATURE 0 0 eee eee 6 Names of the Buttons and their Functions 6 Major button ope
17. ANEL ACAUTION Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL Notes If the FLIP DOWN PANEL does not open fully gently open with your hand e After taking out the CD be sure to close the FLIP DOWN PANEL If a CD 12 cm is left in the ejected position for 15 seconds the CD is automatically reloaded Auto reload 8 cm CDs are not auto reloaded Be sure to remove it when ejected Note e If you force a CD into before auto reloading this can damage the CD Selecting a track Track up 1 Press the gt button to move ahead to the beginning of the next track 2 Each time you press the gt button the track advances ahead to the beginning of the next track Track down 1 Press the lt d button to move back to the beginning of the current track 2 Press the lt d button twice to move to the beginning of the previous track Fast forward fast backward O Fast forward Press and hold the gt button for 1 second or longer O Fast backward Press and hold the lt d button for 1 second or longer Top function The top function resets the CD player to the first track of the disc Press the BAND button to play the first track track No 1 on the disc CD Operations Scan play The scan play locates and plays the first 10 sec onds of each track on a disc automatically This function continues on the disc until it is cancelled The sc
18. M button to return to the previ ous mode AUX function This system has an external input jack so you can listen to sounds and music from external devices connected to this unit Selecting AUX IN sensitivity Make the following settings to select the sensi tivity when sounds from external devices con nected to this unit are difficult to hear even after adjusting the volume The factory default setting is MID 1 Press and hold the A M button for 1 second or longer to switch to the adjustment selec tion display 2 Press the lt d or gt button and select AUX SENS 3 Turn the ROTARY knob clockwise or coun terclockwise as needed and select from HIGH MID or LOW 4 Press the A M button to return to the previ ous mode STO the clock Press and hold the A M button for 1 second or longer to switch to the adjustment selec tion display 2 Press the lt d or P gt button to select CLOCK En 3 Press the gt II button 4 Press the lt d or gt button to select the hour or the minute DXZ525 17 Operations Common to Each Mode 5 Turn the ROTARY knob clockwise or coun Triggered audio mute for cellular terclockwise to set the correct time telepones The clock is displayed in 12 hour fonat This unit requires special wiring to mute the au 6 Press the I1 button to store the time into dio signal automatically when a cellular tele memory
19. Press and hold for 2 seconds or longer Stores current station into ISR memory radio mode only Switches among main display clock display Preset scan Scan play Scan play When pressed and held for 2 When pressed and held for 1 seconds Auto store second Disc scan play No functuon Repeat play Repeat play peat play When pressed and held for 1 second Disc repeat play No functuon Random play Random play When pressed and held for 1 second Disc random play Some of the corresponding buttons on the main unit and remote control unit have different functions DXZ525 1 1 7 OPERATIONS Basic Operations ACAUTION Be sure to lower the volume before switch ing off the unit power or the ignition key The unit remembers its last volume setting If you switch the power off with the volume up when you switch the power back on the sud den loud volume may hurt your hearing and damage the unit Turning on off the power Note e Be careful about using this unit for a long time with out running the engine If you drain the car s battery too far you may not be able to start the engine and this can reduce the service life of the battery 1 Press the FUNC button 2 Theillumination and display on the unit light up The unit automatically remembers its last operation mode and will automatically switch to display that mode 3 Press and hold the FUNC button for 1 sec ond or lon
20. UFAC TURER WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL EJ Bottom View of Source Unit DXZ525 3 Flip Down Panel This unit uses a flip down structure that makes possible large size displays ACAUTION When opening and closing the FLIP DOWN PANEL be careful not to catch your fingers They could be injured 1 Always use this unit with the FLIP DOWN PANEL closed 2 Do not force operations or use this device abnormally when opening or closing the FLIP DOWN PANEL 3 Do not use the FLIP DOWN PANEL as a tray to place objects on when it is open Handling Compact Discs 4 When closing the FLIP DOWN PANEL do not press the OPEN button 5 Strong impacts to the operating or display section can cause damage or deformation 6 If the FLIP DOWN PANEL does not open fully gently open it with your hand Use only compact discs bearing the dise mark Do not play heart shaped octagonal or other specially shaped compact discs Some CDs recorded in CD R CD RW mode may not be usable Handling Compared to ordinary music CDs CD R and CD RW discs are both easily affected by high tem perature and humidity and some of CD R and CD RW discs may not be played Therefore do not leave them for a long time in the car New discs may have some roughness around the edges If such discs are used the player may not work or the sound may skip Use Ba point pen a ball point pen or the l
21. an play is useful when you want to select a desired track 1 Press the SCN button to start scan play SCN lights in the display 2 To cancel the scan play press the SCN but ton again SCN goes off from the display and the current track continues to play Repeat play The repeat play continuously plays the current track This function continues automatically until it is cancelled 1 Press the RPT button RPT lights in the dis play and the current track is repeated 2 To cancel the repeat play press the RPT but ton again RPT goes off from the display and normal play resumes Random play The random play selects and plays individual tracks on a disc in no particular order This function con tinues automatically until it is cancelled 1 Press the RDM button RDM lights in the display an individual track is selected ran domly and play begins 2 To cancel the random play press the RDM button again RDM goes off and normal play resumes Operations Common to Each Mode Hi Lo dimmer control You can adjust the reduced illumination level of the dimmer The factory default setting is ON 1 Press and hold the A M button for 1 second or longer to switch to the adjustment selec tion display 2 Press the lt d or gt button to select DIM MER 3 Turn the ROTARY knob clockwise to ON or counterclockwise to OFF 4 Press the A
22. as 68 DXZ525
23. call it di rectly while in the radio mode RDM button Performs random play while in the CD mode RPT button Repeat play while in the CD mode BAND button Switches the band or seek tuning or manual tuning while in the radio mode Plays a first track while in the CD mode ISR button Recalls ISR radio station in memory Press and hold for 2 seconds or longer Stores current station into ISR memory radio mode only Z E button Use the button to select one of the three types of sound characteristics already stored in memory 6 DXZ525 DISP button e Switches the display indication Main display clock display SCN button e Performs preset scan while in the radio mode When the button is pressed and held auto store is performed e Performs scan play for 10 seconds for each track while in the CD mode A M button e Press and hold the button for 1 second or longer to make the System Adjustments Use the button to switch to the audio mode bass treble balance fader Z Enhancer Plus loudness adjustment lt 4 b gt button Selects a station while in the radio mode or selects a track when listening to a CD These buttons are used to make various settings Press and hold the button for 1 second or longer to switches the fast forward fast back ward 11 button Plays or pauses a CD while in the CD mode 4 button Ejects a CD when it is loaded into the unit
24. en reload it properly MD changer ERROR H Displayed when the temperature in the MD changer is too high and playback has been stopped automatically Lower the surrounding temperature and wait for a while to cool off MD changer ERROR 2 An MD inside the MD changer is not loaded This is a failure of MD changer s mechanism and consult your store of purchase ERROR 3 An MD inside the MD changer cannot be played due to scratches etc Replace with a non scratched non warped disc ERROR 6 An MD inside the MD changer cannot be played because it is loaded upside down Eject the disc then reload it properly Displayed when a non recorded MD is loaded in the MD changer Load a pre recorded MD in the MD changer If an error display other than the ones described above appears press the reset button If the problem persists turn off the power and consult your store of purchase 22 DXZ525 11 SPECIFICATIONS FM Tuner Frequency Range 87 9 MHz to 107 9 MHz Usable Sensitivity 9 dBf 50dB Quieting Sensitivity 15 dBf Alternate Channel Selectivity 70 dB Stereo Separation 1 kHz 35 dB Frequency Response 3 dB 30 Hz to 15 kHz AM Tuner Frequency Range 530 kHz to 1710 kHz Usable Sensitivity 25 uV CD Player System Compact disc digital audio system Usable Discs Compact disc Frequency Response 1 dB 10 Hz to 20 kHz Signal to Noise Ratio
25. er compact disc is already loaded Eject the compact disc before loading the new one Sound skips or is noi sy Compact disc is dirty Clean the compact disc with a soft cloth Compact disc is heavily scratched or warped Replace with a compact disc with no scratches Sound is bad directly after power is turned on Water droplets may form on the internal lens when the car is parked in a humid place Let dry for about 1 hour with the power on 21 DXZ525 10 ERROR DISPLAYS If an error occurs one of the following displays is displayed Take the measures described below to eliminate the problem Error Display ERROR 2 ERROR 3 A CD is caught inside the CD deck and is not ejected A CD cannot be played due to scratches etc Measure This is a failure of CD deck s mechanism and consult your store of purchase Replace with a non scratched non warped disc ERROR 6 A CD is loaded upside down inside the CD deck and does not play Eject the disc then reload it properly CD changer ERROR 2 ACD inside the CD changer is not loaded This is a failure of CD changer s mechanism and consult your store of purchase ERROR 3 ACD inside the CD changer cannot be played due to scratches etc Replace with a non scratched non warped disc ERROR 6 ACD inside the CD changer cannot be played because it is loaded upside down Eject the disc th
26. f 3 to 3 O When EXCITE 0 selected you can adjust the bass and treble in the range of 3 to 3 When Z Enhancer Plus is selected press and hold the Z E button for 2 seconds or longer to change the CUSTOM mode Bass treble charasteristics become flat and the indication FLAT is shown in the dis play Press the Z E button again to change the Z OFF mode Turning on off the loudness The loudness effect emphasizes the bass to create a natural sound tone When you are lis tening to music at a low volume it is recom mended to use the loudness effect 1 Press the A M button to select LOUD OFF 2 Turning the ROTARY knob clockwise or counterclockwise to select LOUD ON on or LOUD OFF off When loudness effect is turned on LD lights on the display The factory default setting is LOUD OFF 14 DXZ525 Radio Operations FM reception For enhanced FM performance the MAGITUNEEZ tuner includes signal actuated stereo control Enhanced Multi AGC Impulse noise reduction curcuits and Multipath noise reduction circuits Changing the reception area This unit is initially set to USA frequency intervals of 10kHz for AM and 200kHz for FM When using it outside the USA the frequency reception range can be switched to the intervals below Setting the reception area 1 Press the BAND button and select the de sired radio band FM or AM 2 While pressing
27. ger to turn off the power for the unit Note e System check The first time this unit is turned on after the wire connections are completed it must check what equipment is connected When the power is turned on SYSTEM and PUSH PWR appear in the display alternately so press the FUNC button The system check starts within the unit When the system check is complete the power is turned off so press the FUNC button again Selecting a mode 1 Press the FUNC button to change the op eration mode 2 Each time you press the FUNC button the op eration mode changes in the following order Radio mode SIRIUS mode gt CD mode gt CD changer mode gt MD changer mode gt DVD changer mode AUX mode gt Radio mode External equipment not connected with CeNET is not displayed 12 DXZ525 Note Be sure to read this chapter referring to the front diagrams of chapter 3 CONTROLS on page 5 unfold Adjusting the volume Turning the ROTARY knob clockwise increases the volume turning it counterclockwise de creases the volume The volume level is from 0 minimum to 33 maximum Switching the display Press the DISP button to select the desired dis play Each time you press the DISP button the dis play switches in the following order Main display Clock display y Main display Once selected the preferred display becomes the display default When a function adju
28. ike to remove any roughness from the edge of the disc Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen Never play a compact disc with any cellophane tape or other glue on it or with peeling off marks If you try to play such a compact disc you may not be able to get it back out of the CD player or it may damage the CD player Roughness Do not use compact discs that have large scratches are misshapen cracked etc Use of such discs may cause misoperation or damage To remove a compact disc from its storage case press down on the center of the case and lift the disc out holding it carefully by the edges Do not use commercially available CD protec tion sheets or discs equipped with stabilizers etc These may damage the disc or cause breakdown of the internal mechanism Storage Do not expose compact discs to direct sunlight or any heat source Do not expose compact discs to excess hu midity or dust Do not expose compact discs to direct heat from heaters Cleaning To remove fingermarks and dust use a soft cloth and wipe in a straight line from the center of the compact disc to the circumference Do not use any solvents such as commercially available cleaners anti static spray or thinner to clean compact discs After using special compact disc cleaner let the compact disc dry off well before playing it Be sure to unfold and read the next page
29. mber is invalid Selecting an MD Each DIRECT button corresponds to an MD loaded into the MD changer Press the corre sponding DIRECT button 1 to 6 to select the desired disc fan MD is not loaded in a slot of MD changer pressing the DIRECT button corresponding to its disc number is invalid Selecting a track Track up 1 Press the gt button to move ahead to the beginning of the next track 2 Each time you press the gt button the track advances ahead to the beginning of the next track Track down 1 Press the lt d button to move back to the beginning of the current track 2 Press the lt d button twice to move to the beginning of the previous track Fast forward fast backward O Fast forward Press and hold the gt button for 1 second or longer O Fast backward Press and hold the lt d button for 1 second or longer Top function CD The top function plays from the first track track No 1 of the disc O When playing a disc 1 to 6 Press the DIRECT button 1 to 6 with the same number as the CD playing O When playing a disc 7 to 12 only when a 12 disc CD changer is used Press and hold for 1 second or longer the DI RECT button 1 to 6 with the same number as the CD playing If a CD is not loaded in a slot of magazine press ing the DIRECT button corresponding to its disc number is invalid DXZ525 19 CD MD Changer Operations Top function MD
30. phone rings in the car 7 Press the A M button to return to the previ This function is not compatible wiht all cellular ous mode telepones Contact your local authorized Clarion Note dealer for information on proper installation and compatibility You cannot set the clock when it is displayed with only the ignition on If you drain or remove the cars battery or take out this unit the clock is re set While setting the clock if another button or operation is selected the clock set mode is can celed Turning the screen saver function on or off This unit is provided with the screen saver func tion You can turn on and off this function If the button operation is performed with the screen saver function on the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display The factory default setting is ON 1 Press and hold the A M button for 1 second or longer to switch to the adjustment selec tion display 2 Press the lt d or gt button and select AUTO SS 3 Turn the ROTARY knob clockwise or coun terclockwise to select ON or OFF 4 Press the A M button to return to the previ ous mode The following illustration presents one of the patterns which are shown when the screen saver function is turned on 18 DXZ525 8 OPERATIONS OF ACCESSORIES CD MD Changer Operations CD MD change
31. r functions When an optional CD MD changer is connected through the CeNET cable this unit controls all CD MD changer functions This unit can control a total of 2 changers MD and or CD Press the FUNC button and select the CD MD changer mode to start play If 2 CD MD chang ers are connected press the FUNC button to select the CD MD changer for play If NO MAGA appears in the display insert the magazine into the CD changer DISC CHK ap pears in the display while the player loads checks the magazine x If NO DISC appears in the display eject the magazine and insert discs into each slot Then reinsert the magazine back into the CD changer If NO DISC appears in the display load MDs into the MD changer ACAUTION CD ROM discs cannot be played in the CD changer Pausing play 1 Press the gt II button to pause play PAUS appears in the display 2 To resume play press the gt II button again Selecting a CD Each DIRECT button corresponds to a disc loaded into the magazine Selecting a disc from 1 to 6 Press the corresponding DIRECT button 1 to 6 to select the desired disc Selecting a disc from 7 to 12 only when a 12 disc CD changer is used Press and hold the DIRECT button 1 to 6 for 1 second or longer to select the desired disc If a CD is not loaded in a slot of magazine press ing the DIRECT button corresponding to its disc nu
32. rations when external equip ment is connected to this unit 7 Display Items me LCD Serea Manne cities ote 8 6 REMOTE CONTROL Inserting the Batteries Functions of Remote Control Unit Buttons 11 7 OPERATIONS Basic Operations Radio Operations CD Operations s s je Operations Common to Each Mode 8 OPERATIONS OF ACCESSORIES CD MD Changer Operations 9 IN CASE OF DIFFICULTY 10 ERROR DISPLAYS o n 11 SPECIFICATIONS ooocoionicnicccccccicccncnnon 1 FEATURES Rotary Encoder Volume with Rubber Controller for Optional SIRIUS Tuner Modules CD R CD RW Compatible MAGITUNEEZ FM Reception System Zero Bit Detector Mute Circuit 2 DXZ525 Flip Down Detachable Aluminum Face amp High Visibility Multi Color LC Display Z Enhancer Plus for Sound Creation with 3 Adjustment Modes 2 Band P EQ CeNET with Balanced Audio Line Transmission and Dynamic Noise Cancelling 8 Times Oversampling Digital Filter and Dual 1 Bit D A Converters 4 Channel RCA Line Level Output with Fader Control 2 Channel RCA AUX Input with 3 Level Adjustments Display Items Z Enhancer Plus indication Operation status indication Frequency clock etc are displays SIRIUS indication CAT Category indication MANU Manual indication
33. st ment such as volume is made the screen will momentarily switch to that function s display then revert back to the preferred display sev eral seconds after the adjustment Setting the Z Enhancer Plus This unit are provided with 3 types of sound tone ef fects stored in memory Select the one you prefer The factory default setting is Z OFF Each time you press the Z E button the tone effect changes in the following order Z OFF gt B BOOST 3 IMPACT gt EX CITE 3 CUSTOM 3 Z OFF B BOOST bass emphasized IMPACT bass and treble empha sized EXCITE bass and treble empha sized mid de emphasized CUSTOM user custom Z OFF no sound effect Basic Operations Adjusting the tone Adjusting the treble Gain Press the A M button and select the item to Frequency adjust Each time you press the A M button This adjustment can be performed when the Z the item changes in the following order Enhancer Plus is set to CUSTOM O When B BOOST is set 1 Press the A M button and select TREB B BOOST X BALE gt FAD 075 LOUD 2 Turning the ROTARY knob clockwise em OFF Last function mode phasizes the treble turning it counterclock O When IMPACT is set wise attenuates the treble IMPACT 3 BAL 0 3 FAD 0 3 LOUD The factory default setting is T lt G 0 gt Ad OFF 3 Last function mode
34. step at a time In the quick tuning mode you can quickly tune the desired frequency 1 Press the BAND button and select the de sired band FM or AM If MANU is not lit in the display press and hold the BAND button for 1 second or longer MANU is lit in the display and manual tuning is now available 2 Tune into a station Quick tuning Press and hold the lt d or P gt button for 1 second or longer to tune in a station O Step tuning Press the lt d or P gt button to manually tune in a station Recalling a preset station A total of 24 preset positions 6 FM1 6 FM2 6 FM3 6 AM exists to store individual radio sta tions in memory Pressing the corresponding DIRECT button recalls the stored radio fre quency automatically 1 Press the BAND button and select the de sired band FM or AM 2 Press the corresponding DIRECT button to recall the stored station Press and hold one of the DIRECT buttons for 2 seconds or longer to store that station into preset memory Manual memory 1 Select the desired station with seek tuning manual tuning or preset tuning 2 Press and hold one of the DIRECT buttons for 2 seconds or longer to store the current station into preset memory Auto store Auto store is a function for storing up to 6 sta tions that are automatically tuned in sequentially If 6 receivable stations cannot be received a previously stored station remains uno
35. the RDM button again DISC and RDM go off from the display and normal play re sumes from the current track 9 IN CASE OF DIFFICULTY Problem Power does not turn on No sound is pro duced Fuse is blown Measure Replace with a fuse of the same amperage If the fuse blows again consult your store of purchase Incorrect wiring Consult your store of purchase No sound output when operating the unit with amplifiers or power antenna attached Power antenna lead is shor ted to ground or excessive current is required for remote on the amplifiers or power antenna 1 Turn the unit off 2 Remove all wires attached to the power antenna lead Check each wire for a possible short to ground using an ohm meter 3 Turn the unit back on Reconnect each amplifier remote wire to the power antenna lead one by one If the amplifiers turn off before all wires are attached use an external relay to provide remote on voltage excessive current required Nothing happens when buttons are pressed Display is not accu rate The microprocessor has malfunctioned due to noise etc Turn off the power then press the OPEN button and remove the DCP Press the reset button for about 2 seconds with a thin rod Reset button DCP or main unit connec tors are dirty Wipe the dirt off with a soft cloth moistened with cleaning alcohol Compact disc cannot be loaded Anoth
36. this equipment does cause harmful interference to radio or television reception which can be de termined by turning the equipment off and on the user is encouraged to consult the dealer or an ex perienced radio TV technician for help Clarion 12V GROUND AM 530 1710kHz FM 87 9 107 9 MHz THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES TO THE FOLLOW CAUSE UNDESIRED OPERATION THIS PRODUCTION COMPLIES WITH DHHS RULES 21 CFR SUB CHAPTER J APPLICABLE AT DATE OF MANUFACTURE CLARION CO LTD 50 KAMITODA TODA SHI SAITAMA KEN JAPAN 051 722 877 MANUFACTURED SERIAL No 286 Clarion Go Lid PEL MADE IN E 2 Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip 3 This unit uses a precision mechanism Even in the event that trouble arises never open the case disassemble the unit or lubricate the ro tating parts ACAUTION USE OF CONTROLS ADJUSTMENTS OR PER FORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE THE COMPACT DISC PLAYER and MINI DISC PLAYER SHOULD NOT BE ADJUSTED OR RE PAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL CHANGES OR MODIFICATIONS NOT EX PRESSLY APPROVED BY THE MANUFAC TURER FOR COMPLIANCE COULD VOID THE USER S AUTHORITY TO OPERATE THE EQUIP MENT INFORMATION FOR USERS CHANGES OR MODIFICATIONS TO THIS PROD UCT NOT APPROVED BY THE MAN
37. verwritten at the memory position 1 Press the BAND button and select the de sired band FM or AM 2 Press and hold the SCN button for 2 seconds or longer The stations with good reception are stored automatically to the preset channels If auto store is performed in the FM bands the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations Preset scan Preset scan receives the stations stored in pre set memory in order This function is useful when searching for a desired station in memory 1 Press the SCN button 2 When a desired station is tuned in press the SCN button again to continue receiving that station Note e Be careful not to press and hold the SCN button for 2 seconds or longer otherwise the auto store function is engaged and the unit starts storing Stations Instant station recall ISR Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button The ISR function even oper ates with the unit in other modes ISR memory 1 Select the station that you wish to store in ISR memory 2 Press and hold the ISR button for 2 seconds or longer Recalling a station with ISR In any mode press the ISR button to turn on the radio function and tune the selected radio station ISR appears in the display Press the ISR button again to return to the previous mode DXZ525 15 CD Operations
Download Pdf Manuals
Related Search
Related Contents
PD1020L - Black & Decker Service Technical Home Page EDS-828 Series User`s Manual v2 Manual de usuario de electrónica de control SM-SS-F ゴ七海道暮らしフェア会場で TT-S-955WH Operating Manual 講演資料-pdf - 安全安心社会研究センター C-more Micro-Graphic Hardware User Manual Crate Amplifiers GFX-20 User's Manual EndoStim User Manual Copyright © All rights reserved.
Failed to retrieve file