Chamberlain 50HERK User's Manual
Contents
1. LOGIC 2 TERMINAL STRIP White 24 VAC AC DC 5 13 24 VAC AC DC 24 VAC AC DC omn KO 12 24 vac AC DC Herkules Microwave Sensor OR Red 7 Open Pink 2005 The Chamberlain Group Inc 01 32999 All Rights Reserved Printed in Mexico2. CHAMBERLAIN LiftMaster PROFESSIONAL FUNCTION The Herkules Motion Detector is a microwave sensor sending out a high frequency sound wave while listening for bounce back When the sound wave is returned at a different frequency the sensor knows that there is a moving object within the detection zone A signal is sent to the internal relay which is wired to the door control s activation input FACTORY DEFAULT SETTINGS The Herkules has been pre programmed to the following settings to make the installation easier and user friendly If settings need to be changed refer to manufacturer s instructions Mounting Height 13 to 16 above the ground Relay Hold Interval 1 2 seconds output Slow Motion Detection Medium detection detects very slow objects Separation People and Vehicles ON Cross Traffic Detection Medium Direction Recognition Forward movement toward the detector NOTE If other settings are desired then they can be changed by using the optional remote control or with the internal push buttons in the detector ADDRESSING THE SENSOR This assists in programming and reduces interference if multiple units are used on the same location 1 Open cover to motion detector 2 Find Dip switches 3 Adjust Dip switches Address 1 Address 2 Address 3 Address 4 r Lak E bi 2 S madres 1 GH N 01 2 Address 2 AH
3. oi 2 Address 3 HA Address Dip Switch ot 2 2B HERKULES MOTION DETECTOR PROGRAMMING PROGRAMMING MOUNTING HEIGHTS Only use if factory default is not desired Without push button remote 1 Open detectors face plate 2 Press both buttons X and Y for 2 seconds the green LED will flash you are now in programming mode Programming Buttons 3 Press X button 2 times 4 Press Y button for the desired height 2 times for 8 to 9 5 3 times for 9 5 to 12 5 4 times for 12 5 to 16 5 times for 16 to 19 6 times for 19 to 22 5 7 times for 22 5 to 23 With optional remote 1 Point the remote at the motion detector 2 Press G the Start key 3 Press F and then press the following number to set the height 2 once for 8 to 9 5 8 once for 9 5 to 12 5 4 once for 12 5 to 16 5 once for 16 to 19 6 once for 19 to 22 5 7 once for 22 5 to 23 4 When you press the number for the desired height the lighted button will stay on indicating the programming is complete If the button flashes then the sensor did not accept the program CHAMBERLAIN LiftMaster PROFESSIONAL MECHANICAL OPERATOR Herkules Microwave Sensor 24 VAC AC DC 24 VAC AC DC OlO O O O Brown White 415 7 io La La L3 e Com o amp LOGIC OPERATOR LOGIC 3 TERMINAL STRIP
Download Pdf Manuals
Related Search