Home

Casio EX-TR350S Owner's Manual

1. Auto With this setting the camera detects available light levels and automatically adjusts the brightness of the monitor screen accordingly ag Brightness that is greater than 1 which makes the screen easier to view This setting consumes more power 1 Bright setting for outdoor use etc Brightness that is greater than 0 0 Normal monitor screen brightness for indoor use etc 1 Screen brightness for viewing in a dark environment without disturbing others around you Automatically Orienting the Monitor Screen Contents to Match Camera Orientation Auto rotate Procedure MENU Setup Auto rotate When On is selected for Auto rotate the orientation of icons and monitor screen image is automatically changed to match the orientation of the camera Resizing Snapshots before Sending Them to a Smartphone Resize before send Procedure MENU Setup Resize before send See page 92 for details 105 Other Settings Set Up Configuring Camera Sound Settings Sounds Procedure MENU Setup Sounds Startup Half Shutter Shutter Operation Toggles the operation tone between on and off Operation Specifies the sound volume This volume setting is also Vol used during video output from the HDMI port page 73 Playback Specifies the volume of movie audio output This volume y setting is also used during video output from the HDMI Vol Volume port page 73
2. l NOTE You also can shoot a snapshot by touching a point on the monitor screen page 58 You can specify the image size for snapshots See page 60 for more information E If the image does not focus If the focus frame stays red and the back lamp is flashing green it means that the image is not in focus because the subject is too close etc Re point the camera at the subject and try to focus again B Shooting with Auto Focus lock page 66 is the name of a technique you can use when you want to shoot an image in which the subject to be focused on is not within the focus frame in the center of the screen 33 Quick Start Basics Bi Shooting with Premium Auto Pro Some menu items are not available while Premium Auto Pro is in use page 57 Only the menu items whose settings can be configured will be displayed on the menus while Premium Auto Pro is in use In addition to shutter speed and ISO sensitivity the camera automatically executes the following operation as required when shooting with Premium Auto Pro Auto Focus is normally performed until you half press the shutter button The camera automatically determines the focus point on the screen and focuses there When shooting people the face detection feature detects the faces of up to ten individuals and adjusts focus and brightness accordingly When shooting with Premium Auto Pro the message Processing Premium Auto may appear on the
3. Charge the Battery You can use either of the two following methods to charge the battery Before charging the battery use the procedure under Opening and Closing the Frame page 14 to open the frame USB AC adaptor USB connection to a computer B To charge with the USB AC adaptor The adaptor lets you charge the battery while it is loaded in the camera While the camera is turned off connect in the sequence shown below Charging time Approximately 140 minutes USB port USB AC adaptor w S i o C L Micro USB cable included with camera lt mark of the small micro USB connector facing the side opposite that of the monitor screen When disconnecting the USB AC adaptor from the camera be sure to disconnect from the camera first 20 Quick Start Basics at IMPORTANT A battery that has not been used for a long time or ambient temperature extremes can cause charging to take longer than normal If charging takes longer than about five hours a timer will terminate it automatically even if the battery is not fully charged This is indicated by the back lamp flashing red If the battery has not been used for a very long time charging may be terminated automatically and the back lamp may start flashing red after only about 60 minutes In either case disconnect the USB cable from the camera and then reconnect it to resume charging Pressing 0 Power while the USB AC adaptor is connected to the c
4. Specifies the volume of Posing Shot voice guidance Posina Vol Voice guidance is output in accordance with this setting 9 even if Off is selected for the Shutter operation tone setting Setting a volume level of 0 mutes output Time Stamping Snapshots Timestamp Procedure MENU Setup Timestamp You can configure the camera to stamp the recording date only or date and time in the lower right corner of each snapshot Once date and time information is stamped into a snapshot it cannot be edited or deleted Example July 10 2015 1 25 p m Date 2015 7 10 Date amp Time 2015 7 10 1 25pm Off No stamping of date and or time Even if you do not stamp the date and or time with Timestamp you can do so later using some printing application Stamping is performed in accordance with the date and time settings page 108 and the display style settings page 108 106 Other Settings Set Up Configuring World Time Settings World Time Procedure MENU Setup World Time Setting a Travel Destination You can use the World Time screen to view the current time in a zone that is different from your Home City when you go on a trip etc World Time displays the current time in 162 cities in 32 time zones around the globe 1 Touch Destination To change the geographic area and city for the time where you normally use the camera select Home
5. 00 0 0 cece eee eee 86 Using a Smartphone as a Camera Remote Controller Remote Capture 86 Sending a Just recorded Snapshot to a Smartphone Quick Send 88 Sending a Snapshot or Movie File from Camera Memory to a Smartphone Send to phone 90 Resizing Snapshots before Sending Them to a Smartphone 0000 ccc eee eee eee Resize before send 92 Viewing Snapshots and Movies in Camera Memory on a Smartphone View on phone 92 BiPrinting 94 Printing with a Computer lllsssseeeele eee 94 Using the Camera with a Computer 96 Things you can do using a computer 0 000 eee 96 Using the Camera with a Windows Computer a na sasaaa aasa aaa 96 W Viewing and Storing Images on a Computer issues 97 B Playing Movies oci ote mtt seme uve qne Berens QI 99 Using the Camera with a Macintosh llle 100 W Connecting the Camera to Your Computer and Saving Files 100 BP Playing a Movies ser de Pee CRY exc p Bede ga ERU 102 Files and Folders eme eatin hee ER Rer ork down SR 103 Memory Card Data s i vaaia ea iai Eia ns 103 Other Settings Set Up 105 Adjusting Monitor Screen Brightness issus Screen 105 Automatically Orienting the Monitor Screen Contents to Match Camera Orientation 00020 0 eae Auto rotate 105 Resizing Snapshots before Sending Them to a Smartphone 00055 Resiz
6. CASIO EN Digital Camera EX TRSS0S User s Guide Thank you for purchasing this CASIO product Before using it be sure to read the precautions contained in this User s Guide Keep the User s Guide in a safe place for future reference For the most up to date information about this product visit the official EXILIM Website at http www exilim com Cea E V Accessories As you unpack your camera check to make sure that all accessories shown below are included If anything is missing contact your original retailer Rechargeable lithium ion USB AC adaptor battery NP 150 AD C54UC Micro USB cable To attach the strap to the camera Attach strap here Read this first The contents of this manual are subject to change without notice The contents of this manual have been checked at each step of the production process Feel free to contact us if you notice anything that is questionable erroneous etc Any copying of the contents of this User s Guide either in part or its entirety is forbidden Except for your own personal use any other use of the contents of this manual without the permission of CASIO COMPUTER CO LTD is forbidden under copyright laws CASIO COMPUTER CO LTD shall not be held liable for any damages or lost profits suffered by you or any third party due to the use or malfunction of this product CASIO COMPUTER CO LTD shall not be held liable for any d
7. 2 Touch City To specify summer time for the destination city select DST and then select the On setting Summer time is used in some geographical areas to advance the current time setting by one hour during the summer months 3 Drag upwards and downwards to display the area of the destination city and then touch OK 4 Drag upwards and downwards until you find the city you want and then touch to select it zt IMPORTANT Before configuring World Time settings make sure that the Home City setting is the place where you live or normally use the camera If it isn t select Home on the screen in step 1 and configure the Home City date and time settings as required page 108 i Selecting the Time Display Use this procedure to specify the time displayed by the camera for your home city and destination 1 Touch Time 2 Touch Home or Destination This will configure the time setting of the location you touched in the previous step 107 Other Settings Set Up Setting the Camera s Clock Adjust Procedure MENU Setup Adjust 1 Touch the value you want to change year month day hour minute Adjust 2 Touch a or Y to change the currently aoa Ez selected value You can specify a date from 2001 to 2049 Be sure to select your Home City page 107 before setting the time and date If you set the 12 24 hour switch icon time and date while the wrong
8. With the Self timer pressing the shutter button starts a timer The shutter is released and the image is shot after a fixed amount of time REC Screen Setting Icon Display Description 10 sec T 10 second Self timer 2 second Self timer 3856 When shooting under conditions that slow down the 2 shutter speed you can use this setting to prevent image blur due to camera movement Off None Self timer is disabled You can interrupt an ongoing Self timer countdown by pressing the shutter button Advanced Recording Settings 58 g g l NOTE The Self timer configured with the above menu cannot be used under the following conditions Slide Panorama page 55 Motion Shutter page 51 When the monitor screen and lens are facing in the same direction J Using the LED Light LED Procedure Enter the REC Mode MENU LED Use the LED light when shooting where lighting is dim The effectiveness of the LED light is reduced the further you are from the subject REC Screen me Setting Icon Display Description The LED lights automatically under dark shooting Auto ES conditions when the shutter button is half pressed to focus or full pressed to shoot On E LED always lights when shooting Off None LED never lights 3 IMPORTANT Do not turn on the LED light near a person s eyes and do not allow anyone to look directly into the light You should c
9. lt or gt D gt l NOTE Pressing the shutter button while in the PLAY mode or while a menu screen is displayed will switch directly to the REC mode A question mark will be displayed for images that cannot be displayed for some reason Deleting Snapshots and Movies If memory becomes full you can delete snapshots and movies you no longer need in order to free up storage and record more images E IMPORTANT Remember that a file image delete operation cannot be undone E To delete a single file 1 In the PLAY mode touch lt or gt to display the file you want to delete 2 Touch qr f tf is not displayed on the screen touch the tab to display it 3 Touch 1 File This will delete the selected image Quick Start Basics 35 E To delete specific files 1 Enter the PLAY mode 2 Touch th If m is not displayed on the screen touch the tab to display it 3 Touch Select This displays a file selection screen 4 Touch a file you want to delete This will select the check box of the selected file s image 5 After you are finished selecting files touch Delete 6 Touch Delete This deletes the files you selected To cancel the delete operation touch Cancel in step 6 B To delete all files 1 Enter the PLAY mode 2 Touch qr If m is not displayed on the screen touc
10. uploading or distributing on the Internet images of TV programs live concerts music videos etc that were photographed or recorded by you may infringe upon the rights of others Note that CASIO COMPUTER CO LTD shall not be held liable for use of this product in any way that infringes on the copyrights of others or that violates copyright laws The following terms which are used in this manual are registered trademarks or trademarks of their respective owners Note that trademark and registered trademark 9 are not used within the text of this manual microSDXC Logo is a trademark of SD 3C LLC Microsoft Windows Windows Vista Windows 7 and Windows 8 are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries Macintosh Mac OS QuickTime iPhoto and iPhone are trademarks of Apple Inc HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC Android is a registered trademark of Google Inc iOS is a trademark or registered trademark of Cisco Systems Inc of the United States Wi Fi is a registered trademark of the Wi Fi Alliance EXILIM and EXILIM Remote are registered trademarks or trademarks of CASIO COMPUTER CO LTD All other company or product names mentioned herein are registered trademarks or trademarks of their respective companies Any and all unauthorized copying distribution and transfer for c
11. 30 Protect indicator page 81 Folder name file name page 103 Movie quality pages 47 61 G Image menu icon page 72 9 Movie recording time page 68 mage scroll icons pages 35 68 Q Battery level indicator page 25 Date time pages 25 108 P Movie play icon page 68 10 Selecting Display Information DISP Each touch of DISP will cycle through settings that display or hide on screen information You can configure separate settings for the REC mode and PLAY mode If DISP is not displayed on the screen touch the tab to display it Display information cannot be changed during movie recording Off No information displayed Information On Shows information about image settings etc Status On Shows more detailed information about settings When Status On is selected you will not be able to view the subject on the monitor screen When Status On is selected for display information in the PLAY mode the exposure shutter speed and ISO sensitivity setting values of the currently displayed image are displayed in orange when the current image s Auto Exposure AE is not correct 11 Quick Start Basics What you can do with your CASIO camera Your CASIO camera is packed with a powerful selection of features and functions to make recording of digital images easier including the following main functions A variety of shooting styles The frame can be ope
12. Digital zoom page 44 Snapshot image size page 60 9 Movie quality pages 47 61 LED light page 59 Zoom icons pages 32 44 Quick send icon page 88 O Movie icon pages 33 47 Battery level indicator page 25 D Movie capacity recording time page 32 B Snapshot capacity number of shots page 32 D PLAY mode icon page 30 B Information icon page 11 Remote capture icon page 86 Recording mode icon page 39 B Menu icon page 57 l NOTE D Movie capacity and B Snapshot capacity do not appear in the following cases even if Information On is selected for the information display setting page 11 Portrait orientation display When the monitor screen and lens are facing in the same direction B Movie Recording Movie quality pages 47 61 Recording time switch icon page 48 Movie remaining time icon page 48 Remaining movie memory capacity Movie recording time pages 48 135 GQ Zoom icons pages 32 44 9 Q Movie stop icon pages 33 48 Tab page 30 Protect indicator page 81 Folder name file name page 103 Snapshot image size page 60 G Image menu icon page 72 Q Image scroll icons pages 35 68 Battery level indicator page 25 Date time pages 25 108 REC mode icon page 30 Information icon page 11 B Image send icon pages 90 92 DDelete icon page 35 B Menu icon page 75 Tab page
13. Start Basics Rotating the Monitor Screen Use the steps below to rotate the monitor screen l NOTE While holding the monitor screen panel as shown in the illustration you can rotate it 180 degrees clockwise and 90 degrees counterclockwise The monitor screen panel can also be rotated when the frame is closed 1 Hold the camera as shown in the illustration 2 Firmly holding the frame carefully rotate the monitor screen panel CE 180 degrees clockwise 90 degrees counterclockwise 15 Quick Start Basics i Camera Configurations You can open the frame and rotate the monitor screen for a variety of different styles Normal Shooting Movie Recording Shoot with the monitor screen facing the opposite direction of the lens Open the frame 90 degrees and hold the frame You can also shoot with the camera upside down if you like Tabletop Shooting Self portrait Shooting Point the monitor screen and lens in the same direction and open the frame about 30 degrees so the camera can stand up Open the frame point the monitor screen and lens in the same direction and press the shutter button on the frame to shoot Quick Start Basics 16 l NOTE When shooting hold the camera still Carefully press the shutter button and take care to avoid all movement as the shutter releases and for a few moments after it releases Take care that
14. and combine them into a 6 second or 15 second movie that includes effects and music 1 Touch a or Y or drag upwards or downwards to display the snapshot you want to use in your Promotion Movie 2 Touch the snapshot you want to use as the first image 75 Other Playback Functions PLAY 3 Repeat steps 1 and 2 to select a total of five snapshots The snapshots will appear in the Promotion Movie in the same sequence that you select them Touch a selected snapshot will de select it 4 Touch OK 5 Touch Length Transition and Music and configure settings for each item as required Length Select 15 seconds or 6 seconds Enable or disable the transition effect Selecting On enabled Transition applies a transition effect when changing from one image to the next Select the background music you want to use Selecting Off Music ad creates a movie without music 6 Touch Create l NOTE This creates a Promotion Movie in accordance with the settings you configured Movies and images recorded using Slide Panorama cannot be converted to a promotion movie You may experience conversion problems if you try to include snapshots recorded with a camera other than this one Promotion movies are HD movie quality with an aspect ratio of 16 9 This means that the upper and lower parts of a snapshot will be trimmed off when it is converted to a
15. automatically if you do not perform any operation for about five minutes Quick Start Basics 30 To Shoot a Snapshot Your camera has a variety of different recording modes to suit various shooting conditions and objectives page 39 This section explains general shooting procedures using the auto recording mode i Selecting an Auto Recording Mode You can select one of two auto recording modes Auto or Premium Auto Pro according to your digital imaging needs REC Screen Setting Icon Display Description Auto This is the standard Auto recording mode Premium Auto Pro On With Premium Auto Pro recording the camera automatically determines whether you are shooting a subject or scenery and other conditions Premium Auto Pro recording delivers higher image quality than standard Auto recording Some of the settings configured automatically by Premium Auto Pro cannot be changed by you It also requires more power and runs down the battery quicker than Auto 1 Press 5 Power to turn on the camera 2 Touch the second icon from the top second icon from the right in the case of landscape display orientation Recording mode If the icon is not displayed on the screen touch the tab to display it 3 Touch Auto or Premium Auto Pro to ow 0 select the auto recording mode you want a amp renters Ato Pre 31 Quick Start Basics i To shoo
16. camera is left turned on and ambient temperature in the area where the camera is used all greatly affect recording time and number of shots values Power Consumption 3 7 V DC Approximately 3 5 W Dimensions 128 9 W X 61 6 H X 14 9 D mm 5 1 W X 2 4 H X 0 59 D Weight Approximately 170 g 6 0 oz including battery and memory card Approximately 149 g 5 3 oz excluding battery and memory card 16GB microSDHC memory card SanDisk Corporation 138 Appendix B Rechargeable lithium ion battery NP 150 Rated Voltage 3 7V Rated Capacitance 950 mAh Operating Temperature Requirements 0 to 40 C 32 to 104 F Dimensions 34 2 W X 39 8 H X 6 9 D mm 1 35 W X 1 57 H X 0 27 D excluding projections Weight Approximately 20 g 0 7 oz B USB AC adaptor AD C54UC Input Power 100 to 240 V AC 50 60 Hz 90 mA Output Power 5 0 V DC 650 mA Operating Temperature Requirements 5 to 35 C 41 to 95 F Dimensions 64 6 W X 38 4 H X 24 D mm 2 5 W X 1 5 H X 0 9 D excluding projections Weight Approximately 40 g 1 4 oz 139 Appendix CASIO CASIO COMPUTER CO LTD 6 2 Hon machi 1 chome Shibuya ku Tokyo 151 8543 Japan M29 MA1402 A 2014 CASIO COMPUTER CO LTD
17. city is selected for your Home City the times and dates of all of the World Time cities page 107 will be wrong To switch between 12 hour and 24 hour format touch the 12 24 hour switch icon Touching and holding A or W scrolls at high speed 3 Touch OK Specifying the Date Style Date Style Procedure MENU Setup Date Style You can select from among three different styles for the date Example July 10 2015 YY MM DD 15 7 10 DD MM YY 10 7 15 MM DD YY 7 10 15 108 Other Settings Set Up Specifying the Display Language Language Procedure MENU Setup gt Language E Specify the display language you want 1 On the menu screen touch Setup 2 Touch Language 3 Drag u the lan select it pwards and downwards until you find guage you want and then touch to Adjust 2015 3 19 Date Style YY MM DD Language English Camera models sold in certain geographic areas may not support display language selection Selecting the HDMI Terminal Output Method HDMI Procedure MENU Setup HDMI Use this setting to select the digital signal format when connecting to a TV with an HDMI cable Auto This setting will cause the format to change automatically in accordance with the connected TV Normally you should use this mode 1080i 1080i format output 480p 480p format output 576
18. image after half pressing the shutter button to perform Auto Focus may not produce the desired results if there are considerable differences in the brightness color and or focus of the individual images If this happens try changing the focus position by focusing on a different subject etc Since a Slide Panorama image is created by joining multiple images together there may be some roughness at the point where two images are joined Shooting under a flickering light source such as fluorescent lighting may result in uneven brightness and or coloring in the final Slide Panorama image The exposure and white balance when shooting Slide Panorama images are fixed at the levels measured when you half press the shutter button at the beginning of the operation With this BEST SHOT scene the LED light setting automatically becomes off 56 Using BEST SHOT Advanced Recording Settings The following are menu operations you can use to configure various camera settings Using the REC Menu E Example Menu Screen Operation 1 In the REC mode touch MENU m This will display the menu screen If MENU is not displayed on the screen touch the tab to display it Menu contents are different in the REC mode and PLAY mode Image Size Touch Shutter Self timer 2 Drag upwards and downwards until you find the item whose setting you want to change 3 Touch the item 4 Configure the setting of the item in a
19. inside the monitor screen Doing so creates the risk of skin inflammation Should monitor screen liquid ever get into your mouth immediately rinse your mouth out and contact your physician Should monitor screen liquid ever get into your eyes or onto your skin immediately rinse with clean water for at least 15 minutes and contact your physician E Backing Up Important Data Always keep backup copies of important data in camera memory by transferring it to a computer or other storage device Note that data can be deleted in the case of camera malfunction repair etc E Memory Protection Whenever replacing the battery be sure to follow the correct procedure as described in the documentation that comes with the camera Incorrectly replacing the battery can result in corruption or loss of data in camera memory E LED Light Do not fire the LED light or use other light emitting functions while the light is pointed in the direction of and too close to a person s face Doing So creates the risk of momentary loss of eyesight o e e eeoo 118 Appendix Precautions During Use E Data Error Precautions Your digital camera is manufactured using precision digital components Any of the following creates the risk of corruption of data in camera memory Removing the battery or memory card while the camera is performing some operation Removing the battery or memory card while the back lamp is flashing green after tu
20. may terminate automatically and the back lamp may start flashing red or go out after only about 60 minutes In either case use of the USB AC adaptor that comes with the camera is recommended If you turn on the camera while charging over a USB connection to a computer is in progress the camera will establish a USB connection with the computer Though charging normally should continue at this time certain types of computers or connection environments may stop charging if supply power is low This will be indicated by the camera s back lamp lighting green Charging is not performed while the connected computer is in the hibernate mode 23 Quick Start Basics Back Lamp Operation Lamp Status Description Back lamp Lit Red Lit Flashing Amber Charging Flashing Red charging taking abnormally long or Abnormal ambient temperature battery problem page 124 Off Lit Green Charging complete The information in parentheses in the above table shows the lamp status while the camera is turned on during charging Other Charging Precautions With the two charging methods described above you can charge the camera s battery NP 150 without removing it from the camera Never use any other type of charger device Attempting to use a different charger can result in unexpected accident This model can be charged only via from USB 2 0 specification USB port only USB charging devices and power s
21. more information Paint Draw figures write text or stamp information into a recorded snapshot See page TT for more information Wireless LAN Connection Turns your smartphone into a camera remote controller and allows you to send images recorded with your camera to your smartphone See page 84 tor more information 13 Quick Start Basics Changing the Camera Style to Suit Shooting Conditions You can change the configuration of the camera by opening or closing the frame and rotating the monitor screen panel to suit shooting conditions E IMPORTANT Do not apply strong pressure to the surface of the monitor screen Doing so can damage it Never touch the lens with your fingers Finger smudges dirt and other foreign matter on the lens can interfere with proper operation of the camera Use a blower or other means to keep the lens and flash window free of dirt and dust and wipe gently with a soft dry cloth Opening and Closing the Frame The frame of the camera can be rotated 360 degrees 1 With the monitor screen facing towards you hold onto the frame 2 Push the monitor screen panel from behind 3 Holding the edges of the monitor screen panel swing the frame open ae IMPORTANT Do not try to open or close the frame while the monitor screen panel is rotated Doing so can cause the frame to come into contact with the monitor screen panel and cause malfunction 14 Quick
22. setup of the camera simply find the scene that matches what you are trying to achieve and the camera sets up for it automatically This helps to minimize the chance of ruined images due to poor exposure and shutter speed settings E To shoot an image with BEST SHOT 1 Inthe REC mode touch the recording mode icon page 39 If the icon is not displayed on the screen touch the tab to display it REC Mode 2 Touch G3 BEST SHOT This will display a menu of BEST SHOT scenes 3 Touch the scene you want to select Touching in the upper right corner of the screen and then touching a BEST SHOT scene will display detailed information about the scene 4 Press the shutter button if you are shooting a snapshot or touch C Movie if you are shooting a movie With some BEST SHOT scenes the message Busy Please wait will appear on the monitor screen after you press the shutter button The camera is in the process of recording an image until the message appears Keep the camera still The image processing operation takes some time to complete after the message appears You will not be able to record another image while the message is displayed E BEST SHOT Precautions BEST SHOT scene images were not shot using this camera Images shot using a BEST SHOT scene may not produce the results you expected due to shooting conditions and other factors You can modify the camera settings that are con
23. the EV value A higher EV value is best for dark color subjects and value is best for light colored subjects for shooting outdoors on a clear day and backlit subjects 2 Touch OK This applies the exposure compensation value The exposure compensation value you set remains in effect until you change it or turn off the camera which causes it to revert to 0 0 l NOTE When shooting under very dark or very bright conditions you may not be able to obtain satisfactory results even after performing exposure compensation Advanced Recording Settings 62 PE I Adjusting White Balance White Balance Procedure Enter the REC Mode MENU White Balance You can adjust white balance to match the source of light available where you are shooting and avoid the blue cast that results when shooting outdoors when it is cloudy and the green cast that results when shooting under fluorescent lighting 1 Touch the type of white balance you want to select You can see the affect of the white balance setting you select on the monitor screen Setting Description Auto WB Configures the camera to adjust white balance automatically E3 Daylight For shooting outdoors on a clear day Z Overcast For shooting outdoors on an overcast rainy day in the shade etc Shade For shooting on a clear day in the shade of trees or Z buildings ki Day White Fluor For shooting under white or day wh
24. to resume Using the camera s built in memory or certain types of memory cards can slow down processing speed Whenever possible use an Ultra High Speed Type memory card Note however that not all operations can be guaranteed even if an Ultra High Speed Type memory card is used Certain movie quality settings can result in too much time being required to record data which can result in breaks in the image and or audio during playback If this happens the movie icon will turn yellow on the monitor screen Microphone Except for High Speed Movie zoom operations are supported during movie recording page 44 Zoom is disabled during high speed movie recording If you want to use zoom perform the zoom operation before you touch O Movie to start recording SR Zoom page 44 is disabled during movie recording The effects of camera movement in an image become more pronounced when you shoot close up or with a large zoom factor Because of this stabilizing the camera by placing it on a level surface etc is recommended During High Speed Movie recording focus is fixed at the position where it was when recording started To focus an image half press the shutter button for Auto Focus before you touch O Movie to start recording 49 Recording Images Using BEST SHOT BEST SHOT provides you with a collection of sample scenes that show a variety of different types of shooting conditions When you need to change the
25. use a commercially available HDMI cable to connect the camera to a TV HDMI connector HDMI input H amp S AE HDMI output micro HDMI cable commercially available HDMI micro connector Make sure that the camera is turned off before plugging in or unplugging the cable Check the user documentation that comes with the TV for information about requirements before plugging into or unplugging from the TV 4 Turn on the TV and select its video input mode If the TV has more than one video input select the one where the camera is connected 73 Viewing Snapshots and Movies 5 Turn on the camera The camera monitor screen will shows a remote controller image The TV screen will show a recorded image 108 0026 13 3 5 10 50 The contents of the remote controller image will depend on the type of image that is displayed on the TV screen 6 Touch the camera monitor screen to perform l NOTE operations Use a HDMI cable with a plug that is compatible with the camera s HDMI micro connector on one end and a plug that is compatible with your TV s HDMI connector on the other end Proper image and or audio output and other operations may not be possible with some devices Connecting the camera to the HDMI connector of another device can damage both the camera and the other device Never connect two HDMI output connectors to each other Disconnect the HDMI cable when you a
26. with your camera to your smartphone After sending an image to a smartphone 90 you can then upload it to a social networking service Use a smartphone or computer to view and download snapshots and movies 92 stored in camera memory Requires installation of the EXILIM Remote app on your smartphone zt IMPORTANT Never use wireless LAN functions inside an aircraft or anywhere else where such operation is restricted 84 Establishing a Wireless LAN Connection l NOTE Note that using wireless LAN functions requires more battery power usage than normal Make sure that the camera battery is sufficiently charged before starting a wireless LAN operation The operating range depends on the local communication environment and on the type of smartphone you are connected to Establishing a Connection between a Smartphone and Your Camera Installing the EXILIM Remote Smartphone app on your smartphone makes it possible to remotely control the camera from your smartphone and to send images recorded with the camera to your smartphone For information about how to install and operate EXILIM Remote see the User s Guide or visit the official Exilim Remote Website http www casio com cn dc app Note that an Exilim Remote Website may not be available for a particular language If you cannot find an Exilim Remote Website in a language you want please use a version in anoth
27. AN connection is broken for some reason during data communication between the camera and smartphone File could not be saved because battery is low Battery power is low so an image file could not be saved Folder cannot be created You are trying to record a file while there are already 9999 files stored in the 999th folder If you want to record more delete files you no longer need page 35 LENS ERROR This message appears and the camera turns off whenever lens performs some unexpected operation If the same message appears after you turn power back on contact a CASIO authorized service center or your original retailer 133 Appendix Memory Full Memory is full with images you recorded and or files saved by editing operations Delete files you no longer need page 35 Record Error Image compression could not be performed for some reason during image data storage Shoot the image again SYSTEM ERROR Your camera system is corrupted Contact your retailer or a CASIO authorized service center There are no files There are no files in built in memory or on the memory card This card is not formatted The memory card loaded in the camera is not formatted Format the memory card page 111 This function cannot be used This message will appear part way through an operation when you attempt to use a function that is not allowed in combination with another fu
28. ARD HDMI cover and pull the cover in the direction indicated by the arrow to open it 3 Load a memory card Positioning the memory card so its back is facing upwards towards the monitor screen side of the camera slide it into the card slot all the way in until you hear it click securely into place 4 Close the CARD HDMI cover and then return the frame to its original position 3 IMPORTANT Never insert anything besides a supported memory card page 27 into the memory card slot Should water or any foreign object ever get into the card slot immediately turn off the camera and contact your retailer or nearest CASIO authorized service center 28 Quick Start Basics B To replace the memory card Press the memory card and then release it This will cause it to pop out of the memory card slot slightly Pull the card out the rest of the way and then insert another one Never remove a card from the camera while the back lamp is flashing green Doing so can cause the image save operation to fail and even damage the memory card i To format initialize a new memory card Format a memory card on the camera before using it for the first time zx IMPORTANT Formatting a memory card that already has snapshots or other files on it will delete its contents Normally you do not need to format a memory card again However if storing to a card has slowed down or if you notice any other abnormalit
29. Effects of Camera Movement during Movie Recording You can configure the camera to minimize the effects of camera movement during Full HD and HD movie recording Note however that this does not prevent image blur due to subject movement High Speed Movie Recording Precautions When shooting a high speed movie shoot in a well lit environment When recording a high speed movie light source flicker can cause horizontal bands to appear in the image This does not indicate malfunction of the camera 48 Recording Images xt IMPORTANT l NOTE Spending a long time using movie recording will cause the camera to become slightly warm to the touch This is normal and does not indicate malfunction The camera may automatically adjust its monitor screen brightness in order to reduce heat generation The camera also records audio along with Full HD and HD movies Note the following points when shooting a movie Take care that the microphone is not blocked by your fingers etc Good audio recording results are not possible when the camera is too far away from what you are trying to record Shooting movies for long periods in areas where temperature is relatively high can cause digital noise dots of light to appear in the movie image A rise in the camera s internal temperature also may force movie recording to stop automatically If this happens stop recording and allow the camera to cool down which should cause normal operation
30. Pressing the shutter button on the frame to shoot a Shutter button self portrait while this function is enabled On will display an image for review before it is saved When this function is disabled Off self portrait images are stored directly into memory as soon as you shoot them The self portrait check function can be used under the conditions described below Recording mode Auto Premium Auto Pro Make up Monitor screen Pointed in the same direction as the lens 1 Touch On 2 Press the shutter button on the frame to shoot the image 3 Review the recorded image When this function is enabled you can perform the following image review and store operations after shooting a self portrait Setting Description Zooms the review image Two finger squeeze and spread screen operations can also be used to zoom the review image An enlarged image can be scrolled by dragging on the screen Returns a zoomed image to its original size Returns to image recording standby without saving the currently displayed review image Saves the currently displayed review image and returns to image recording standby Touching E3 while a zoomed review image is displayed still saves the image in normal not zoomed size pooma Advanced Recording Settings 67 g g Viewing Snapshots and Movies Viewing Snapshots See page 34 for the procedure for viewing
31. Touch OK This will cause the background of the subject you outlined to become gray 3 Touch Z to select the area to be extracted and then touch OK This will display the cut out subject To scroll back one screen touch the Kg icon in the upper right corner of the display Extracted subject screen Original image with subject extracted 4 After confirming that the part of the image to be extracted is the way you want touch OK This saves the extracted image l NOTE You cannot extract from an extracted subject Attempting to do so will cause an error 79 Other Playback Functions PLAY Inserting a Subject into another Snapshot or Adding a Built in Frame to a Snapshot Paste subject Procedure Enter the PLAY Mode MENU Paste subject You can add the camera s built in characters or frames to snapshots or you can insert characters you create with Cut out subject page 78 into snapshots Only an image that satisfies the following conditions can be used as a background image It must be a snapshot recorded with this camera or a snapshot transferred to this camera s memory It must be an image with an aspect ratio of 4 3 1 Touch lt or gt or drag left or right to scroll through images Select image you want to use as the background and then touch OK 2 Touch lt or gt or drag left or right to scroll though subjects Select the s
32. USB compliance USB charging terminal HDMI output Micro TypeD Microphones Monaural Speaker Monaural Power Requirements Rechargeable lithium ion battery NP 150 X1 137 Appendix Approximate Battery Life All of the values provided below represent the approximate amount of time under normal temperature 23 C 73 F before the camera turns off These values are not guaranteed Low temperatures shorten battery life Number of snapshots Operating Time 260 shots Actual movie recording time Full HD movie 55 minutes Approximate continuous movie recording time Full HD Movie Approximate continuous movie recording time High speed movie Continuous Playback Snapshots 3 hours 20 minutes Temperature 23 C 73 F Battery NP 150 Rated Capacity 950 mAh Recording Medium 16GB SDHC memory card SanDisk Corporation UHS I series 1 hour 30 minutes 1 hour 40 minutes In accordance with CIPA Camera and Imaging Products Association standards 2 n accordance with CASIO standards 3 One image scroll approximately every 10 seconds The above values are based a new battery starting from a full charge Repeated charging shortens battery life The above values are for reference only They do not guarantee that the specified battery life will be attained under actual operating conditions Frequency of Auto Focus usage configured settings the amount of time the
33. a Hue Soft Focus Effect level Light Tone Hue Pop Effect level Sepia Effect level Monochrome Effect level Fisheye Effect level 5 Touch the level you want to select 6 Touch OK 7 Press the shutter button to shoot l NOTE This function works best when the camera is made stationary by placing it on a level surface etc With the HDR Art scene the settings below are configured automatically LED light Off Shooting with this REC mode makes the shooting range narrower than normal The desired effect may not be attained if the camera or subject moves during shooting Depending on shooting conditions and image composition this REC mode may not be able to produce the desired result 42 Recording Images i Recording Beautiful Portraits Make up Make up smoothes the skin texture of the subject and softens facial shadows caused by harsh sunlight for better looking portraits 1 In the REC mode touch the recording mode icon page 39 Touch p Make up Touch Make up Level 2 3 Touch the tab 4 5 Touch the mode and level you want to select Brightening Lightens the skin tone of the Brightening subject Produces a beautifully natural looking skin tone Natural You can select a make up level effect intensity within the range of 0 Off to 12 Strongest Make up Level 6 Touch OK 7 Pr
34. ad the camera s battery and reconfigure the time and date settings page 25 Do not remove the battery from the camera for at least 24 hours after configuring time and date settings After that the settings will not be reset if you remove the battery If the time and date are reset to their factory default settings when you remove the battery after it has been loaded for more than 24 hours it could mean that the camera s setting memory is defective Contact your retailer or a CASIO authorized service center Buttons are not responsive right after the power has been turned on With large capacity memory cards there is a delay after the power has been turned on before the buttons become responsive l Display Messages ALERT The camera s protection function may have activated because camera temperature is too high Turn off the camera and wait until it cools down before trying to use it again Battery is low Battery power is low Card ERROR There is something wrong with the memory card Turn off the camera remove the memory card and then reload it into the camera If this message re appears when you turn the camera back on format the memory card page 111 xt IMPORTANT Formatting a memory card deletes all its files Before formatting try transferring recoverable files to a computer or some other storage device Communication stopped This message appears when the wireless L
35. amages lost profits or claims by third parties arising out of the use of EXILIM Remote CASIO COMPUTER CO LTD shall not be held liable for any damages or lost profits caused by loss of memory contents due to malfunction repair or any other reason Note that the example screens and product illustrations shown in this User s Guide may differ somewhat from the screens and configuration of the actual camera LCD Panel The liquid crystal panel of the monitor screen uses high precision technology that provides a pixel yield in excess of 99 9996 This means that some very small number of pixels may not light or may remain lit at all times This is due to the characteristics of the liquid crystal panel and does not indicate malfunction Take test shots Before shooting your final image shoot a test shot to ensure that the camera is recording correctly Contents ACCESSO E Siaa e oec haved ane He ERO eae bb eru ee ER e 2 Read this first esc c rest ee aad ee dee pet d oa 3 General Guide cee arraya Y rhe ipt e ieee Eo Pen amd Rm EP ar et 8 Monitor Screen Contents and How to Change Them 9 B Quick Start Basics 12 What you can do with your CASIO camera liliis leslie 12 Changing the Camera Style to Suit Shooting Conditions 14 W Opening and Closing the Frame llle 14 W Rotating the Monitor Screen 2 2 0 0 esee ees 15 W Camera Configurations sagara aeaa e
36. amera will turn on the camera with power being supplied by the battery Because of this charging will stop The USB AC adaptor will become warm during charging This is normal and does not indicate malfunction The shape of the power plug depends on each country or geographic area Back Lamp Operation Lamp Status Description Back lamp Lit Red Charging Abnormal ambient temperature USB AC Flashing Red adaptor problem or battery problem page 124 or charging terminated by the timer Off Charging complete 21 Quick Start Basics USB Cable Connection Precautions When connecting the USB cable to the camera make sure that the cable connector and monitor screen panel are oriented correctly as shown in the illustration below Make sure that the lt gt mark side of the USB cable connector and the front of the monitor screen panel the side opposite that of the monitor screen are facing in the same direction ar Front of monitor screen panel The back lamp always initially light after charging starts Even if the battery is already fully charged the lamp will light momentarily If the lamp does not light check the orientation of the USB cable connector Make sure that you insert the cable connector into the USB port until you feel it click securely into place Failure to insert the connector fully can result in poor communication or malfunction No
37. arer Snapshots Multi SR Zoom Multi SR Zoom uses super resolution technology and multiple Continuous Shutter CS images for higher quality and clarity across the entire image For information about the zoom factor see page 45 When shooting with Multi SR Zoom the camera may require more time for image data processing between shots 1 Select Multi SR Zoom scene page 50 2 Press the shutter button to shoot l NOTE e Multi SR Zoom is effective when you want to capture delicate textures With this BEST SHOT scene the LED light setting automatically becomes off The desired Multi SR Zoom effect may not be attained if the camera or subject moves during shooting Shooting with Priority on Subject Faces HS Best Selection With High Speed Best Selection the camera automatically shoots a series of images and selects the best one based on facial image blur and facial expression whether the subject is smiling or blinking 1 Select HS Best Selection scene page 50 2 Press the shutter button to shoot l NOTE With this BEST SHOT scene the LED light setting automatically becomes off If one or more of the faces are blurred in all of the images that are shot they will be blurred in the final image as well The following conditions may make it impossible for the camera to determine if the subject is blinking or smiling This may result in a final image in which the subject is blinking or not smi
38. artup Screen at Power On Startup Procedure MENU Setup Startup Selecting On for Startup causes a built in startup screen to appear on the monitor screen whenever the camera is turned on 110 Other Settings Set Up Formatting Built in Memory or a Memory Card Format Procedure MENU Setup Format If a memory card is loaded in the camera this operation will format the memory card It will format built in memory if no memory card is loaded The format operation will delete all contents on the memory card or in built in memory It cannot be undone Make sure you do not need any data currently on the card or in built in memory before you format it Formatting built in memory or a memory card will delete all protected images stored there Check the battery level before starting a format operation and make sure it is not too low Formatting may not be performed correctly and the camera may stop operating normally if the camera powers down while formatting is in progress Resetting the Camera to Factory Defaults Reset Procedure MENU Setup Reset See page 127 for details about the camera s factory default settings The settings below are not reset World Time settings clock settings date style screen language WLAN password 111 Other Settings Set Up Appendix Safety Precautions N DANGER This symbol indicates information that if ignored or applied incorrectly creates the danger of de
39. ath or serious personal injury N WARNING This indication stipulates matters that have the risk of causing death or serious injury if the product is operated incorrectly while ignoring this indication AN CAUTION This indication stipulates matters that have the risk of causing injury as well as matters for which there is the likelihood of occurrence of physical damage only if the product is operated incorrectly while ignoring this indication Symbol Examples This circle with a line through it Q means that the indicated action must not G be performed Indications within or nearby this symbol are specifically prohibited The example at left indicates that disassembly is prohibited The black dot means that the indicated action must be performed Indications within this symbol are actions that are specifically instructed to be performed The example at left indicates that the power plug must be unplugged from the electrical socket N DANGER B Rechargeable Battery To charge the battery use only the method specifically described in this manual Attempting to charge the battery by an unauthorized means creates the risk of battery overheating fire and explosion Do not expose or immerse the battery in fresh water or salt water Doing CN so can damage the battery and cause deterioration of its performance bt and loss of service life The battery is intended for use with a CASIO Digital Camera only Use with any other d
40. ation 1 Touch lt or gt or drag upwards or downwards to display the image you want to rotate 2 Touch Rotate This will rotate the image 90 degrees to the left 3 When the image is in the orientation you want touch lt l NOTE Rotation of a panorama image is not supported Note that this procedure does not actually change the image data It simply alters how the image is displayed on the camera s monitor screen An image that has been protected or zoomed cannot be rotated i Resizing a Snapshot Resize Procedure Enter the PLAY Mode MENU Resize You can reduce the size of a snapshot and save the result as a separate snapshot The original snapshot is also retained You can select resize an image to one of three image sizes 5M 3M VGA 1 Touch lt or gt or drag left or right to display the image you want to resize 2 Touch a size This resizes the image to the selected size and saves the result as a new photograph l NOTE Resizing a 3 2 size snapshot will create an image with an aspect ratio of 4 3 with both sides cut off The recording date of the resized version of the snapshot will be the same as the recording date of the original snapshot 82 Other Playback Functions PLAY i Cropping a Snapshot Trimming Procedure Enter the PLAY Mode MENU Trimming You can crop a snapshot to trim parts you do not need and save the resu
41. ble click the copied DCIM folder to open it 2 Double click the folder that contains the images you want to view 3 Double click the image file you want to view For information about file names see Memory Folder Structure on page 104 98 Using the Camera with a Computer i Playing Movies To play back a movie first copy it to your computer and then double click the movie file Some operating systems may not be able to play back movies If this happens you need to install separately available software If you are unable to play back movies go to the URL below to download QuickTime 7 and install it on your computer http Awww apple com quicktime E Minimum Computer System Requirements for Movie Playback The minimum system requirements described below are necessary to play back movies recorded with this camera on a computer Operating System Windows 8 Windows 7 Windows Vista Windows XP SP3 CPU Image Quality Full HD HD Core 2 Duo 3 0GHz or higher Image Quality HS240 Pentium 4 2 0GHz or higher Required Software QuickTime 7 The above are recommended system environments Configuring one of these environments does not guarantee proper operation Certain settings and other installed software may interfere with proper playback of movies B Movie Playback Precautions Be sure to move the movie data to the hard disk of your computer before trying to play it Proper movie playback may n
42. ccordance with the screen contents To cancel and exit the menu touch MENU or press the shutter button l NOTE Depending on the recording mode some of the items on the menu that appears may not be usable While Premium Auto Pro is in use only the menu items whose settings can be configured will be displayed on the menus B Menu Operations in This Manual Menu operations are represented in this manual as shown below Touch the indicated icons and items and perform operations as they are indicated from left to right Procedure Enter the REC Mode MENU Touch Shutter Advanced Recording Settings 57 g g i Using Touch Shutter Touch Shutter Procedure Enter the REC Mode MENU Touch Shutter You can use the procedure below to shoot a snapshot 1 Touch On 2 Point the camera at the subject 3 When you want to shoot touch the monitor screen The camera automatically comes into focus and then shoots You can still use the shutter button to shoot even when On is selected for Touch Shutter l NOTE When Auto is selected as the recording mode the camera will automatically focus on the point you touch When Premium Auto Pro is selected as the recording mode the camera will automatically determine the optimum focus point s and focus automatically i Using the Self timer Self timer Procedure Enter the REC Mode MENU Self timer
43. cident B USB AC Adapter Misuse of USB AC adapter creates the risk of fire and electric shock Be sure to observe the following precautions Use only the specified USB AC adapter Never use the USB AC adapter with another device Use a power outlet that matches the power supply specified for the USB AC adapter Never plug the USB AC adapter or power cord into a wall outlet that is shared by other devices or into a shared extension cord Never locate the USB AC adapter near a stove or other heating device Misuse of the USB AC adapter can cause them to become damaged creating the risk of fire and electric shock Be sure to observe the following precautions Never place heavy objects on the USB AC adapter or subject it to direct heat Do not modify the USB AC adapter allow it to become damaged or forcibly bend it Do not twist or pull on the power cord When in use locate the cord where it will not be tripped over 114 Appendix N WARNING Never touch the power plug while your hands are wet Doing so creates the risk of electric shock Should the power cord or power plug become damage contact your retailer or nearest CASIO authorized service center Do not use the USB AC adapter in areas where liquids might spill on them Liquids create the risk of fire and electric shock Liquids Water sports drinks seawater animal or pet urine etc Do not place a flower vase or any
44. compose an image in which the subject you want to focus on is not within the focus frame in the center of the screen es wt 1 Align the monitor screen s focus frame with the subject you want to focus on and then half press the shutter button Focus frame 2 Keeping the shutter button half pressed which maintains the focus setting move the camera to compose the image goa td 3 When you are ready to shoot the image press the shutter button the rest of the way down l NOTE Focus lock also locks exposure AE The focus frame does not appear on the display when the Touch Shutter is enabled On B Turning on Image Review Review Procedure Enter the REC Mode MENU Review While Review is turned on the camera will display an image immediately after it is recorded Type 1 Displays a full screen view of the image for about one second Displays a Review image in the lower left corner of the monitor screen Type 2 Touching the Review image will enter the PLAY mode and display a full screen view of the image Off Turns off review image display When Type 1 is selected the aperture shutter speed and ISO sensitivity will be orange if the Auto Exposure is not correct Advanced Recording Settings 66 g g Checking a Snapshot before Saving It Self portrait check Procedure Enter the REC Mode MENU Self portrait check
45. corded with this camera on a computer Operating System Image Quality Full HD Mac OS X 10 4 11 or higher Image Quality HD HS240 Mac OS X 10 3 9 or higher Required Software QuickTime 7 or higher The above are recommended system environments Configuring one of these environments does not guarantee proper operation Certain settings and other installed software may interfere with proper playback of movies B Movie Playback Precautions Proper movie playback may not be possible on some Macintosh models If you experience problems try the following Upgrade to the latest version of QuickTime Shut down other applications that are running ae IMPORTANT Be sure to move the movie data to the hard disk of your Macintosh before trying to play it Proper movie playback may not be possible for data accessed over a network from a memory card etc 102 Using the Camera with a Computer Files and Folders The camera creates a file each time you shoot a snapshot record a movie or perform any other operation that stores data Files are grouped by storing them in folders Each file and folder has its own unique name For details about how folders are organized in memory see Memory Folder Structure page 104 Name and Maximum Number Allowed Example File Each folder can contain up to 9999 files named 26th file name CIMGO0001 through CIMG9999 The extension CIMG0026 JPG on the file nam
46. ded with this camera Viewing Snapshots and Movies 69 g P i Editing a Movie on the Camera Movie Editing The Movie Editing feature lets you cut out a specific part of a movie 1 Enter the PLAY mode and then start playback of the movie you want to edit 2 When playback reaches the location where you want to cut touch II to pause 3 Touch y 4 Touch the option that specifies what you want to cut 8 Cuts everything from the beginning of the movie up to LI the current location Cuts everything from the current location to the end of LET Next Cut the movie 5 Touch Cut The selected cut operation will take considerable time to complete Don t try to perform any camera operation until the Busy Please wait message disappears from the monitor screen Note that a cut operation can take a long time if the movie being edited is long Fu IMPORTANT When you edit a movie only the result is saved The original movie is not retained An editing operation cannot be undone l NOTE A movie that is shorter than five seconds cannot be edited Editing of movies recorded with a different type of camera is not supported You will not be able to edit a movie if the amount of remaining memory capacity is less than the size of the movie file you want to edit If there is not enough memory available delete files you no longer need to free up more Splitting of a
47. dicator Color Cyan Yellow Red Red Bil indicates battery power is low Charge the battery as soon as possible Recording is not possible when W is indicated Charge the battery immediately The level shown by the battery indicator may change when you switch between the REC mode and PLAY mode Leaving the camera for about 30 days with no power supplied while the battery is dead will cause its date and time settings to be cleared A message telling you to configure time and date settings will appear the next time you turn on the camera after restoring power When this happens configure date and time settings page 108 See page 138 for information about battery life and number of shots Configuring Basic Settings the First Time You Turn On the Camera The first time you turn on the camera a screen appears for configuring the display language date and time settings Failure to set the date and time correctly will cause the wrong date and time data to be recorded with images E IMPORTANT A screen for language selection will not appear in step 2 of the procedure below if you purchased a camera intended for the Japanese market To change the display language from Japanese in this case use the procedure under Specifying the Display Language Language page 109 Note that a version of this manual in the language you select may not be included with a camera intended for the Japanese market Camera models sold
48. e F2 8 f 3 8 mm equivalent to 21 mm in 35 mm format Zoom Up to 4 0X when SR zoom and Digital zoom are used in combination Up to 15 9X when SR Zoom HD Zoom and Digital zoom are used in combination VGA size Focusing Contrast Detection Auto Focus Focus Modes Auto Focus Macro Focus Pan Focus Infinity AF Area Spot ntelligent AF area used when Premium Auto Pro is selected Approximate Focus Range Snapshot From Lens Surface Auto Focus 8 cm to CO 3 1 to CO Macro Focus 8 cm to 50 cm 3 1 to 19 7 Infinity CO Metering Multi pattern by imaging element Exposure Control Program AE Exposure 2 0 EV to 2 0 EV in 1 3EV steps Compensation Shutter CMOS electronic shutter Shutter Speed Snapshot Auto 1 10 to 1 16000 second Snapshot Premium Auto Pro 1 to 1 16000 second May differ due to the camera setup Aperture Value F2 8 Appendix 136 White Balance Auto Daylight Overcast Shade Daywhite Fluorescent Daylight Fluorescent Tungsten Manual WB Sensitivity Snapshots Standard Output Auto ISO 100 ISO 200 ISO 400 ISO 800 ISO 1600 Sensitivity ISO 3200 equivalent Movies Auto Wireless data transfer Standard IEEE 802 11b g n Operation frequency range 1 to 11ch Encryption WPA2 Monitor Screen 3 0 inch TFT color LCD Super Clear LCD 921 600 dots Capacitive type touch panel External connection Micro USB port Hi Speed
49. e BB 16 Using the Touch Panel 4 neni niiden hx ttn yr eg hod det 17 First charge the battery prior to use naana elles 19 F Loading the Battery Rl mE lee eke bed eed 19 W Charge the Battery srne oe aE cette eee 20 Configuring Basic Settings the First Time You Turn On the Camera 25 Preparing a Memory Card iiisilsielellse se 27 W Supported Memory Cards lisse 27 W To load a memory card 28 W To format initialize a new memory card 0 cee eee 29 Turning Power On and Off 0 0 0 0 cece 30 To Shoot a Snapshots siaii aasa e mni cee eee 31 W Selecting an Auto Recording Mode isses 31 a Tostioota snapsno ood slg lE xL E ex ERE REG REE Sed kee 22 Viewing Snapshots sssslsssleele ns 34 Deleting Snapshots and Movies 000 0c cece eee eee eee 35 Snapshot Shooting Precautions 0 000 c eee eee eee 36 Recording Images 38 Selecting a Recording Mode 000 c eects 39 W Shooting with Posing Shot 0000 e eee Posing Shot 40 W Shooting with Artistic Effects 00 0 c eee eee ART SHOT 41 W Recording Beautiful Portraits llle Make up 43 Shooting WIth Zoom bua re Cave EM etd uet Ra 44 Shooting a Self portrait llle 46 To recorda movie csse Rhe e Rr Res Re hn Rin 47 4 Contents Using BEST SHOT 50 Shooting with Triple Shot 0 0000000 eee 51 Using Moti
50. e before send 105 Configuring Camera Sound Settings Sounds 106 Time Stamping Snapshots 00200 e eee Timestamp 106 Configuring World Time Settings World Time 107 W Setting a Travel Destination lllilelieeeseeemR 107 W Selecting the Time Display lsllleee ee BBBIRR 107 Setting the Camera s Clock slslseleleeelssesn Adjust 108 Specifying the Date Style 00 Date Style 108 Specifying the Display Language Language 109 Selecting the HDMI Terminal Output Method HDMI 109 6 Contents Changing the Camera Password for Wireless LAN Connection 2 000055 WLAN password 110 Displaying a Startup Screen at Power On Startup 110 Formatting Built in Memory or a Memory Card Format 111 Resetting the Camera to Factory Defaults Reset 111 WlAppendix 112 Safety Precautions ie ke kilxa io doa te dts ecd i t akha da 112 Precautions During Use lsilsieseleele ee 119 Power Supply Arretan aA nn E nil eee et ure otc ed Los toe Uae Wt soto gutta La 124 l Charging sc o cimo Gate Ge ne wipe ae Into earam in 124 Wl Battery Precautions lllilisesieeeeeeRRBBnRVIA 125 W Using the Camera in another Country 00 0 0 eese 125 Using a Memory Card anaana aaea 126 Reset Initial Defau
51. e commercially available software as required The procedures you need to perform are different for Windows and the Macintosh Windows users should refer to Using the Camera with a Windows Computer on page 96 Macintosh users should refer to Using the Camera with a Macintosh on page 100 Using the Camera with a Windows Computer When you want to do Operating z Required Software ses this System Version page Save images Windows 8 to aicomputer Windows 7 Installation not required 97 and view them Windows Vista there manually Windows XP SP3 Windows 8 se Windows 7 QuickTime 7 Play movies d You need to download QuickTime 7 on 99 Vows Vista the Web if you want to use it Windows XP SP3 y i 96 Using the Camera with a Computer Viewing and Storing Images on a Computer You can connect the camera to your computer in order to view and store images snapshot and movie files Never use your computer to modify delete move or rename any image files that are in the camera s built in memory or on its memory card Doing so can cause problems with the camera s image management data which will make it impossible to play back images on the camera and can drastically alter remaining memory capacity Whenever you want to modify delete move or rename an image do so only on images that are stored on your computer ae IMPORTANT Never u
52. e conditions can cause the battery to swell to the point that you may not be able to remove it Battery fluid can damage your eyes Should battery fluid get into your eyes accidentally immediately rinse them with clean tap water and then Q consult a physician 113 Appendix ZAN WARNING E Smoke abnormal odor overheating and other abnormalities Continued use of the camera while it is emitting smoke or strange odor or while it is overheating creates the risk of fire and electric shock Immediately perform the following steps whenever any of the above symptoms are present 1 Turn off the camera 2 If you are using the USB AC adapter to power the camera unplug the power plug from the power outlet Also remove the battery from the camera taking care to protect yourself against burn injury 3 Contact your retailer or nearest CASIO authorized service center B Keep Away From Fire Never expose the camera to fire which can cause it to explode and creates the risk of fire and personal injury Q B Avoid Use While In Motion Never use the camera to record or play back images while operating an automobile or other vehicle or while walking Looking at the monitor Q while in motion creates the risk of serious accident E LED Light Never use the LED light while it is pointed in the direction of a person operating a motor vehicle Doing so can interfere with the driver s vision Q and create the risk of ac
53. e depends on the file type CIS Extension Serial number 4 digits Folders Folders are named from 100CASIO to 100th folder name 999CASIO 100CASIO There can be up to 900 folders in memory EI Serial number 3 digits You can view folder and file names on your computer For details about how file names are displayed on the camera s monitor screen see page 10 The total number of folders and files allowed depends on the image size and quality and capacity of the memory card being used for storage Memory Card Data The camera stores images you shoot in accordance with the Design Rule for Camera File System DCF E About DCF The following operations are supported for DCF compliant images Note however that CASIO makes no performance guarantees concerning these operations Transferring this camera s DCF compliant images to another manufacturer s camera and view them Printing this camera s DCF compliant images on another manufacturer s printer Transferring another camera s DCF compliant images to this camera and view them 103 Using the Camera with a Computer B Memory Folder Structure J Dcim DCIM Folder 100CASIO Recording Folder CIMGOO001 JPG Image File CIMGO0002 MOV Movie File 101CASIO Recording Folder 102CASIO Recording Folder B Supported Image Files Image files shot with this camera DCF compliant image files This camera may not be able to disp
54. e shooting with this function If Type 1 is selected in another mode selecting the Triple Shot scene will cause the Review setting to change to Type 2 Using Motion Shutter to Trigger a Self timer Operation Motion Shutter With Motion Shutter the camera automatically triggers a self timer countdown whenever it detects subject movement within an icon you specify on the monitor screen This means you can control operation of the self timer from a distance by waving your hand so you can include yourself in the image being shot 1 Select y Motion Shutter scene page 50 2 Drag the start self timer icon and preview icon Q to the location in the image where you want movement to be detected Keep the two icons separate from each other Whenever you move an icon to a location where it overlaps the other icon the other icon will move out of the way automatically 51 Using BEST SHOT 3 When everything is ready press the shutter button all the way down The start self timer icon will change to to indicate that the camera is in standby for shooting 4 Facing the camera move your hand or perform some other movement in the area of the start self timer icon you positioned in step 3 When the camera detects subject movement within the icon it will automatically start a self timer countdown The camera will shoot an image when the countdown reaches zero and then go back int
55. ence is generated Radio wave reception may be poor in certain environments Also note that other devices using the same 2 4GHz band used by this product may cause reduced processing speeds in both devices Connecting to a public LAN This product does not support wireless LAN connection over a public wireless LAN environment Intended Areas of Use This camera s wireless LAN function is intended for use in China only CASIO COMPUTER CO LTD shall be held in no way responsible if the wireless LAN function is used outside of China in violation of the radio laws and or regulations that apply in the country or geographic area where it is used B Other Precautions The camera becomes slightly warm during use This is normal and does not indicate malfunction 121 Appendix B Copyrights Except for your own personal enjoyment unauthorized use of snapshots or movies of images whose rights belong to others without the permission of the right holder is forbidden by copyright laws In some cases shooting of public performances shows exhibitions etc may be restricted entirely even if it is for your own personal enjoyment Regardless of whether such files are purchased by you or obtained for free posting them on a website a file sharing site or any other Internet site or otherwise distributing them to third parties without the permission of the copyright holder is strictly prohibited by copyright laws and international treaties For example
56. er language W App operation guarantees No guarantees are made concerning the ability to operate the EXILIM Remote app on any particular smartphone or tablet Installing the EXILIM Remote App on Your Smartphone E Android terminal Supported Versions Android 2 3 3 to 4 3 Visit the Exilim remote Website at the URL provided above E iPhone Supported Versions iOS 5 1 to 7 0 Visit the Exilim remote Website at the URL provided above 85 Establishing a Wireless LAN Connection i Configuring Wireless LAN Settings Use the procedure below to establish a wireless LAN connection between the camera and a smartphone for the first time This operation is required for the first connection only 1 On your camera enter the REC mode and then touch the fj Remote Capture icon If the By Remote Capture icon is not displayed on the screen touch the tab to display it This will enable connection with a smartphone and the camera will display a screen for input of an SSID and password password SSID 2 Forthe smartphone Wi Fi setting input the camera SSID and password When the message Start up the phone app appears on the camera s monitor screen it means that the smartphone has established a wireless connection with the camera To break the wireless connection touch Cancel What you need to do to establish a wireless LAN connection depends on the type of smartphone you are using For details ab
57. erature as the air in the new location After that remove the camera from the bag and open the battery cover for a few hours 119 Appendix B Lens Never apply too much force when cleaning the surface of the lens Doing so can scratch the lens surface and cause malfunction You may sometimes notice some distortion in certain types of images such as a slight bend in lines that should be straight This is due to the characteristics of lenses and does not indicate malfunction of the camera B Caring for your camera Never touch the lens with your fingers Finger smudges dirt and other foreign matter on the lens can interfere with proper operation of the camera Use a blower or other means to keep the lens and flash window free of dirt and dust and wipe gently with a soft dry cloth To clean the camera wipe it with a soft dry cloth B Old Rechargeable Battery Handling Precautions Insulate the positive and negative terminals with tape etc Do not peel the covering off of the battery Do not try to take the battery apart B Discarding or Transferring Ownership of a Memory Card or the Camera The format and delete functions of the camera do not actually delete files from the memory card The original data remains on the card Note that responsibility for the data on a memory card lies with you The following procedures are recommended whenever you discard a memory card or the camera or if you transfer ownership to anot
58. es on web services etc 87 Establishing a Wireless LAN Connection Sending a Just recorded Snapshot to a Smartphone Quick Send You can use Quick Send to send a snapshot you just recorded with the camera to a smartphone After sending an image to a smartphone you can then upload it to a social networking service Note that you will not be able to use Quick Send to send a snapshot to a smartphone if you performed any one of the operations below after recording the snapshot Exiting the REC mode to the PLAY mode or turning off the camera Resetting the camera page 111 or formatting camera memory page 111 Selecting Remote Capture Performing a movie recording operation 1 On the smartphone start up EXILIM Remote In the upper right corner of the screen that appears tap Setting 2 If you plan to upload the image to a social networking service after sending it to the smartphone turn Send to SNS on Otherwise turn it off 3 On the camera enter the REC mode and shoot the snapshot 4 Touch the H Quick Send icon 5 Touch Send 6 On your smartphone start up the EXILIM Remote app This will establish a connection between your camera and the smartphone and send the snapshot you just recorded to the smartphone If the message Connect your phone to the access point below remains on the camera s monitor screen change the smartphone s Wi Fi settings so your camera is
59. es the image BRONCO l NOTE After selecting Ea you can change either the color or eraser or thickness setting only To change the other setting select Ea again 77 Other Playback Functions PLAY i Playing a Slideshow on the Camera Slideshow Procedure Enter the PLAY Mode MENU Slideshow You can use the slideshow mode to automatically scroll through all of the images in camera memory l NOTE All operations are disabled while the slideshow is transitioning from one image to another The time required for transition from one image to another may be longer in the case of an image that was not recorded with this camera To return to normal single image display touch the screen i Extracting an Image from a Snapshot Cut out subject Procedure Enter the PLAY Mode Display snapshot MENU Cut out subject You can draw an outline around a subject person or object and extract it from the snapshot You can then insert the extracted subject into another snapshot Extracted Subject 1 Touch the drawing tool you want and then draw a boundary around the subject that you want to extract Drawing Tool Line Type Description L Thin Draws a line for cutting out a subject 9 Thick e Erases a drawn line The boundary line should be continuous which means it starts and ends at the same point 78 Other Playback Functions PLAY 2
60. ess of the shutter button while HS Anti Shake is enabled causes the camera to record multiple images and automatically combine them 1 Select HS Anti Shake scene page 50 2 When you are ready to shoot press the shutter button l NOTE With this BEST SHOT scene the LED light setting automatically becomes off High Speed Anti Shake may not operate properly resulting in blurred images if the camera is moved more than the allowable range or if the subject moves during shooting When shooting with this BEST SHOT scene the ISO sensitivity setting is fixed at AUTO 5A Using BEST SHOT Shooting a Panorama Image Slide Panorama With Slide Panorama you move the camera to compose and record multiple images which are then combined to a panorama This feature lets you shoot a panorama which is dramatically greater than the physical capabilities of the lens NN HUA The final panorama image can be one of the two sizes shown below Slide Direction is Right or Left Maximum 115201080 pixels Slide Direction is Up or Down Maximum 1920X7296 pixels Zoom operations are not supporting during Slide Panorama shooting The zoom setting is fixed at full wide angle You can shoot a panorama image for approximately 360 degrees horizontally or approximately 180 degrees vertically 1 Select tm Slide Panorama scene page 50 2 Touch the icon for the slide direction the direction the camera will move while s
61. ess the shutter button to shoot l NOTE Note that Make up can be used even when the recording mode is Premium Auto Pro or Motion Shutter In either of these recording modes perform steps 3 through 7 of the above procedure to select the Make up mode and level you want 43 Recording Images Shooting with Zoom Your camera is equipped with various types of zoom HD Zoom SR Zoom and digital zoom The maximum zoom factor depends on the image size setting Allows greater zoom capabilities by cutting out a portion of the HD Zoom original image and enlarging it without deterioration of image quality SR Zoom Applies super resolution technology to suppress image deterioration A digital process is used to enlarge the center of the image so Digitalzoom there is deterioration of image quality 1 In the REC mode touch the zoom icons to Zoom icons zoom JA Telephoto Wide Angle Telephoto Enlarges the subject and narrows the range Wide Angle Reduces the size of the subject and broadens the range 2 Press the shutter button to shoot the image l NOTE Telephoto images are prone to blurring caused by camera movement when you press the shutter button Because of this stabilizing the camera by placing it on a level surface etc is recommended Zoom operations are disabled during high speed movie recording Perform the zoom operation before you
62. est CASIO authorized service center B Disassembly and Modification Never try to take it apart or modify it in any way Doing so creates the risk of electric shock burn injury and other personal injury Be sure to G leave all internal inspection maintenance and repair up to your retailer or nearest CASIO authorized service center 115 Appendix N WARNING B Dropping and Rough Treatment E Memory Cards E Precaution when Camera is On E Interference with other digital devices Continued use of the camera after it is damaged by dropping or other rough treatment creates the risk of fire and electric shock Immediately S perform the following steps whenever any of the above symptoms are present 1 Turn off the camera 2 If you are using the USB AC adapter to power the camera unplug the power plug from the power outlet Also remove the battery from the camera taking care to protect yourself against burn injury 3 Contact your retailer or nearest CASIO authorized service center Memory cards are small and present a risk of accidentally being swallowed by infants and young children Keep memory cards out of the reach of infants and young children If a memory card is ever swallowed accidentally contact a physician immediately Do not touch the camera for long periods while it is on The camera becomes warm when on and long term contact creates the risk of low temperature burns Should you notice radio
63. evice creates the risk of the battery damage or deterioration of battery performance and service life hens Appendix 112 N DANGER Failure to observe any of the following precautions creates the risk of battery overheating fire and explosion Never use or leave the battery near open flame Do not expose the battery to heat or fire Q Make sure the battery is oriented correctly when charging it Never carry or store the battery together with items that can conduct electricity necklaces pencil lead etc Never disassemble the battery pierce it with a needle or expose it to strong impact hit it with a hammer step on it etc and never apply solder to it Never place the battery into a microwave oven dehumidifier high pressure generating device etc Never remove the outer sticker from the battery Should you ever notice leakage strange odor heat generation discoloration deformation or any other abnormal condition while using o charging or storing a battery immediately remove it from the camera and keep it away from open flame Also do not use the affected battery after the abnormal symptoms disappear Do not use or leave the battery under direct sunlight in an automobile S parked in the sun or in any other area subject to high temperatures Doing so can damage the battery and cause deterioration of its performance and loss of service life Also thes
64. figured after you select a BEST SHOT scene Note however that the BEST SHOT settings revert to their defaults when you select another BEST SHOT scene or turn off the camera Movie recording is supported only while HS Night Scene is selected Selecting HS240 for the movie quality setting while the HS Night Scene BEST SHOT Scene is selected will cause the camera to record movies using the auto recording mode 50 Using BEST SHOT Shooting with Triple Shot Triple Shot shoots a burst of three images and stores them in memory This feature is great for making sure you don t miss those special moments when kids are around 1 Select Triple Shot scene page 50 2 Point the camera at the subject and then half press the shutter button The camera will start pre recording images at this time If you release the half pressed shutter button before pressing it the rest of the way down all of the images currently in the pre record buffer will be deleted 3 Press the shutter button all the way down to record This will record three images one of the action before the shutter button is fully pressed plus two real time images Pressing the shutter button all the way without first half pressing it will result in only two images being recorded l NOTE The following functions cannot be used with this function Touch Shutter Self timer Self portrait check Type 1 cannot be selected for the Review setting whil
65. finger against the screen as you bring them together Use squeeze to reduce the size of the screen image ae IMPORTANT Never use a pointed or hard object to perform screen operations Doing so can damage the screen l NOTE Applying a commercially available LCD protective sheet will reduce the operation sensitivity of the monitor screen 18 Quick Start Basics First charge the battery prior to use Note that the battery of a newly purchased camera is not charged Perform the steps below to load the battery into the camera and charge it Your camera requires a special CASIO rechargeable lithium ion battery NP 150 for power Never try to use any other type of battery Loading the Battery 1 Open the cover While depressing the BATT OPEN button slide the cover in the direction indicated by the arrow in the illustration BATT OPEN button 2 Load the battery With the CASIO logo on the battery upwards load the battery into the camera as shown in the illustration Battery 3 Close the cover While holding down the BATT OPEN button align the tabs of the cover with the notches on the camera and then slide the cover in the direction of the arrow 19 button Quick Start Basics To replace the battery 1 Open the battery cover and remove the current battery As shown in the illustration pull up the edge of the battery to remove it 2 Load a new battery
66. g in dimly lit Some coarseness ISO 3200 sensitivity areas increased digital noise Since higher ISO sensitivity values tend to result in digital noise in images the camera performs a noise filtering process Because of this it may take relatively longer for the camera to finish recording an image after it is shot You will not be able to perform any operation while image recording is in progress Advanced Recording Settings 64 gone f Selecting a Focus Mode Focus Procedure Enter the REC Mode MENU Focus Changing to a different focus mode can help to achieve better focus A REC Screen Focus Mode Approximate Focus Range Settings l Type of Shot con Display Snapshot Movies Snapshot Movies AF General 8cmto 46 cm to Auto None henstdin oo infinity oo infinity Focus 9 Automatic 3 1 to co 18 1 to oo Maro Close uns 8 cm to 50 cm 17 cm to 27 cm P Fixed 3 1 to 19 7 6 7 to 10 6 Shooting focal point with a 46 cm to didis PF relatively Ped reo oo infinity wide focus P P 18 1 to 00 range Scenery and Infinit other distant Fixed Infinity Wide Angle y y g subjects The focus range is the distance from the lens surface 2 The distance depends on shooting conditions 65 Advanced Recording Settings Using Focus Lock Subject to be focused on Focus lock is a technique you can use when you want N to
67. g precautions Never cover the USB AC adapter or power cord with a quilt blanket or other cover while it is in use and do not use it near a heater Doing so can interfere with heat radiation and cause the area around them to become hot Do not use detergent when cleaning the power cord the USB AC adapter or the USB cable especially the plugs and jacks Insert the power plug into the wall outlet as far as it will go Unplug the power plug from the wall outlet before leaving the camera Q unattended for long periods such as when leaving on a trip etc At least once a year use a cloth or vacuum cleaner to clean any dust build up on the prongs of the power plug and in the area around them Power cord included with your camera When unplugging from the wall outlet never pull on the power cord Grasp the power plug and pull B Rechargeable Battery If battery charging does not end normally within the specified charging time stop charging anyway and contact your local CASIO authorized Service center Continued charging creates the risk of battery overheating fire and explosion Be sure to read the user documentation that comes with the camera before using or charging the battery Store batteries in a location that cannot be reached by infants and young children When using a battery where infants and young children are present be on guard to ensure that they do not have the chance to remove the battery from the came
68. green at this time In this mode your Macintosh recognizes the memory card loaded in the camera or the camera s built in memory if it does not have a memory card loaded as a drive The appearance of the drive icon depends on the Mac OS version you are using Drag the DCIM folder to the folder to which you want to copy it After the copy operation is complete drag the drive icon to Trash Disconnect the camera from the computer On the camera press Power to turn off the camera After checking to make sure that the back lamp is unlit or lit red disconnect the USB cable 101 Using the Camera with a Computer B To view copied images 1 Double click the camera s drive icon Double click the DCIM folder to open it 2 3 Double click the folder that contains the images you want to view 4 Double click the image file you want to view For information about file names see Memory Folder Structure on page 104 An image that was rotated on the camera will be displayed on your Macintosh screen in its original unrotated orientation J Playing a Movie You can use QuickTime which comes bundled with your operating system to play back movies on a Macintosh To play back a movie first copy it to your Macintosh and then double click the movie file E Minimum Computer System Requirements for Movie Playback The minimum system requirements described below are necessary to play back movies re
69. h the tab to display it 3 Touch All Files 4 Touch Delete This will cause the message There are no files to appear Snapshot Shooting Precautions Operation If unwanted light is shining onto the lens shade the lens with your hand when shooting an image Monitor Screen when Shooting Snapshots Subject brightness conditions can cause monitor screen response to slow and can cause digital noise in the monitor screen image The image that appears on the monitor screen is for image composition The actual image will be recorded in accordance with the currently selected recording mode page 39 36 Quick Start Basics Shooting Indoors under Fluorescent Lighting Minute flickering of fluorescent lighting can affect the brightness or color of an image Other Precautions The slower the shutter speed the greater the possibility that noticeable noise will be generated in an image Because of this the camera automatically performs a noise reduction at slow shutter speeds The noise reduction process causes it to take longer to record images at lower shutter speeds The shutter speeds for which noise reduction is performed depend on the camera setup and shooting conditions A noise reduction process is performed when ISO sensitivity is set to a high value This can cause the camera to take relatively longer to be ready to shoot again after you press the shutter button Do not perform any operation while the image reco
70. hat the battery is faulty Contact your nearest CASIO authorized service center 124 Appendix i Battery Precautions E Precautions during Use Operation provided by a battery under cold conditions is always less than operation under normal temperatures This is due to the characteristics of the battery not the camera Charge the battery in an area where the temperature is within the range of 15 C to 35 C 59 F to 95 F Outside this temperature range charging can take longer than normal or even fail Do not tear or remove the battery outer label If a battery provides only very limited operation following a full charge it probably means the battery has reached the end of its service life Replace the battery with a new one BW Storage Precautions Storing the battery for a long time while it is charged can cause deterioration of battery characteristics If you do not plan to use a battery for some time fully use up its charge before storing it Always remove the battery from the camera when you are not using it A battery left in the camera can discharge and go dead which will require some time to charge when you need to use the camera Store batteries in a cool dry place 20 C 68 F or lower To prevent over discharging of an unused battery fully charge it and then load it in the camera and fully use up the charge about once every six months i Using the Camera in another Country B Precaut
71. her party When discarding a memory card either physically destroy the memory card or use commercially available data delete software to completely delete the data on the memory card When transferring ownership of a memory card to another party use commercially available data deletion software to completely delete the data on it Use the format function page 111 to completely delete the data in built in memory before discarding or transferring ownership of the camera 120 Appendix BW Precautions when using the wireless LAN function This product uses wireless data communication which can cause interference with or be subject to interference by other nearby devices Radio transmission interception Note that the radio waves that are used to send and receive data can be intercepted by third parties Unauthorized access CASIO COMPUTER CO LTD shall be held in no way liable for any unauthorized access and or use of the access point equipped on this product if the product is ever lost or stolen Use as a wireless LAN device Use the wireless LAN function of this product only as specifically described in this manual Any other use is unintended use and CASIO COMPUTER CO LTD shall be held in no way liable for any damages arising out of unintended use Magnetism electrostatic charge and radio interference Do not use this product near a microwave oven or any other area where magnetism electrostatic charge or radio interfer
72. hooting You can select one of four different slide directions ea right Beg left IT up H down 3 Point the camera at the start of the panorama and half press the shutter button to allow the camera to focus automatically 4 Press the shutter button the rest of the way down and a slide cursor will appear on the monitor screen Slowly move the camera in the direction indicated by the arrow on the screen until the slide cursor reaches the other end of its movement range i e all the way to the right when moving the camera to the right The camera will start composing the panorama image internally when the slide cursor reached the other end of the movement range Image composing also will start automatically if you stop moving the camera during panorama shooting Slide cursor 55 Using BEST SHOT l NOTE The following conditions are not compatible with Slide Panorama shooting Subject whose brightness is very different from that of its surroundings due to artificial light sunlight etc Rivers waves waterfalls or other subject with constantly changing patterns Sky beach or other subject with continuous patterns Camera too close to the main subject Moving subject Dark surroundings Slide Panorama may stop part way through in the following cases Subject or camera movement Camera movement that is too fast or too slow Shooting a Slide Panorama
73. in certain geographic areas may not support display language selection 25 Quick Start Basics 1 Press 5 Power to turn on the camera 2 Drag page 18 upwards and downwards until you find the language you want and then touch to select it 3 Touch the date display format you want Example July 10 2015 i YY MM DD 15 7 10 O Power DD MM YY 10 7 15 MM DD YY 7 10 15 4 Touch the value you want to change year month day hour minute 0 00 5 Touch 4A or Y to change the currently o ENG selected value e Touching and holding A or Ww will change the setting at high speed To switch between 12 hour and 24 hour format 12 24 hour switch icon touch the 12 24 hour switch icon 6 When the date and time settings are the way you want touch OK 7 Touch Auto or Premium Auto Pro to select the default auto recording mode you want 8 Touch Apply You will be able to change this setting later if you want See page 31 for details If you make a mistake configuring display language date or time settings with the above procedure refer to the following pages for information about how to correct the settings Display language Page 109 Date and time Page 108 l NOTE Each country controls its local time offset and the use of summer time and so they are subject to change 26 Quick Start Basics Preparing a Memor
74. ing Shot Posing Shot Posing Shot lets you shoot five successive snapshots as the camera provides voice guidance The result is a series of shots with different poses and expressions 1 In the REC mode touch the Recording mode icon page 39 2 Touch amp 9 Posing Shot 3 Press the shutter button to start recording Shoot in accordance with the voice guidance from the camera l NOTE To adjust the volume of the voice guidance use the Posing Vol setting under Sounds page 106 To interrupt an ongoing Posing Shot operation press the shutter button or touch the monitor screen Note that preview images are not displayed when shooting with this function B Changing the Voice Guidance Type You can use the procedure below to select one of three types for the voice guidance that sounds while you are shooting 1 Touch g Voice 2 Touch the number of the voice guidance you want to use This will cause the corresponding voice to sound 3 After selecting the voice guidance type you want to use touch OK 40 Recording Images i Shooting with Artistic Effects ART SHOT A variety of artistic effects help to make even common ordinary subjects become more novel and exciting Scene Description Applies HDR High Dynamic Range page 52 photography HDR Art to transform snapshots into works of art that provide a greater degree of expression than conventional imaging Crysta
75. ing a Wireless LAN Connection Resizing Snapshots before Sending Them to a Smartphone Resize before send Procedure MENU Setup Resize before send This feature can be use to resize snapshots before they are sent to a smartphone using Quick Send Remote Capture or Send to phone Images are converted to 3M size before being sent 3M If an original image is 3M size or smaller it is sent without resizing Off Images are sent in the size they were originally recorded Viewing Snapshots and Movies in Camera Memory on a Smartphone View on phone You can use this function to enable up to eight smartphones and or computers to access snapshots and movies in camera memory for viewing and download A smartphone does not need to have the EXILIM Remote app installed in order to access camera images using this function 1 On the camera touch PLAY to enter the PLAY mode 2 Touch the ij Image Send icon If the Hf Image Send icon is not displayed on the screen touch the tab to display it 3 Touch E View on phone This establishes a connection between the smartphone and camera and displays a URL f the message Connect your phone to the access point below remains on the camera s monitor screen change the smartphone s Wi Fi settings so your camera is selected for connection page 86 After about 60 seconds the camera s monitor screen will g
76. interference or other problems on other devices is being caused while using this product do not use the wireless functions of this product Use of wireless functions creates the risk of radio interference and abnormal operation of other devices When in a medical facility or aircraft comply with instructions of personnel in charge Electromagnetic waves and other signals emitted by the camera s wireless function create the risk of accident Do not use the camera s wireless function while in the vicinity of high precision digital devices or digital devices that use weak signals Doing so can interfere with proper operation of such digital devices and create the risk of accident When using the camera s wireless function keep it away from any person wearing a pacemaker Magnetism emitted by the camera may o affect cardiac pacemakers and other medical devices Should you ever notice any abnormality immediately move away from the product and contact a physician On a crowded train or any other crowded location where there is the possibility of being in the vicinity of a person wearing a cardiac o pacemaker turn off the camera s wireless function or turn off the camera Radio waves emitted by the camera s wireless function may affect pacemaker operation oeoe 116 Appendix Z CAUTION B USB AC Adapter Misuse of the USB AC adapter creates the risk of fire and electric shock Make Sure you observe the followin
77. ions during Use The bundled USB AC adaptor is designed for operation with any power supply in the range of 100V to 240V AC 50 60Hz Note however that the shape of the power plug depends on each country or geographic area Before taking the camera and USB AC adaptor along on a trip check with travel agent about the power supply requirements in your destination s Do not connect the USB AC adaptor to a power supply through a voltage converter or similar device Doing so can lead to malfunction B Extra Batteries Taking along extra fully charged batteries NP 150 is recommended while on a trip in order to avoid not being able to shoot images due to the battery going dead 125 Appendix Using a Memory Card See page 27 for information about supported memory cards and how to load a memory card B Using a Memory Card f a memory card starts to behave abnormally during image playback you can restore normal operation by reformatting it page 111 However it is recommended that you always take along multiple memory cards whenever using the camera far away from the home or office As you record data to and delete data from a memory card a number of times it loses its ability to retain data Because of this periodic re formatting of a memory card is recommended Electrostatic charge electrical noise and other phenomena can cause data to become corrupted or even lost Make sure that you always back up important data on
78. ite fluorescent lighting iow Daylight Fluor For shooting under daylight fluorescent lighting E3 Tungsten For shooting under light bulb lighting Manual WB For configuring the camera manually to suit a particular light source CD Touch W Manual WB Blank white paper In the location where you plan to shoot point the camera at a blank white piece of paper so it fills the entire monitor screen j k Touch an area of the screen JUS yu where no icon is located The white balance setting is retained even if you turn off the camera When Iff Auto WB is selected for the white balance setting the camera automatically determines the white point of the subject Certain subject colors and light source conditions can cause problems when the camera tries to determine the white point which makes proper white balance adjustment impossible If this happens select the white balance setting that matches your shooting conditions Daylight Overcast etc 2 Touch OK Advanced Recording Settings 63 g g i Specifying ISO Sensitivity ISO Procedure Enter the REC Mode MENU ISO ISO sensitivity is a measure of sensitivity to light Setting Description AUTO Adjusts sensitivity automatically according to conditions ISO 100 Lower Slow shutter speed Less noise sensitivity ISO 200 ISO 400 ISO 800 ISO 1600 Fast shutter speed Set Higher for shootin
79. ith Mac OS X 10 0 Operation is supported with Mac OS 10 1 10 2 10 3 10 4 10 5 10 6 10 7 and 10 8 using the OS standard USB driver only l NOTE You also can use your computer s card slot if it has one or a commercially available card reader to access image files directly from the camera s memory card For details see the user documentation that comes with your computer 100 Using the Camera with a Computer B To connect the camera to your computer and save files 1 Turn off the camera and then USB port use the micro USB cable that comes with the camera to connect it to your Macintosh For details about connecting to the camera and precautions when connecting see page 23 j Micro USB cable included with camera 2 Press D Power to turn on the camera When you turn on the camera check to make sure that the color of its back lamp changes from red to green or orange page 24 In this mode your Macintosh recognizes the memory card loaded in the camera or the camera s built in memory if it does not have a memory card loaded as a drive The appearance of the drive icon depends on the Mac OS version you are using The first time you connect the camera to your Macintosh with the USB cable an error message may appear on your computer If this happens disconnect and then reconnect the USB cable 3 Double click the camera s drive icon The camera s back lamp will light
80. ity is always STD 640480 when shooting with Remote Capture B Controlling Your Camera with a Smartphone EXILIM Remote supports the Remote Capture operations listed below This manual explains EXILIM Remote operations based on screens that appear using the iPhone version Some operations may differ depending on your smartphone type Exits Remote Capture OQ Select to configure self timer and LED light settings for snapshot shooting The Remote Capture self timer countdown time is 10 seconds fixed Displays current LED light settings O Displays what is being picked up by the camera s lens G Performs a zoom operation Toggles between snapshot and movie shooting Shoot a snapshot or start movie recording Sends the snapshot that was just recorded to the smartphone Displays location information settings Displays current self timer settings A Location Information You can use to add location information to snapshots shot with Remote Capture when they are sent to a smartphone On an Android terminal select Options on the Remote Capture screen On an iPhone perform the following operation Settings Privacy gt Location Services E IMPORTANT Enabling location based services causes the recording date location information and other personally identifiable information to be included in the snapshot data Take care when sharing or publishing such imag
81. ize through a print service attaching an image to e mail when viewing the image on a computer etc The size of an image indicates how many pixels it contains and is expressed as horizontal pixels X vertical pixels Example Image size pixels 12M 40003000 Approximately 12 million pixels 5M 2560X1920 Approximately 5 million pixels Note that larger images have more pixels so they take up more memory space For information about image size and number of images that can be stored see page 134 For information about movie image size see page 47 For information about resizing existing snapshots see page 82 i Movie Image Quality Settings Movie Quality Procedure Enter the REC Mode MENU Movie Quality This setting can be used to configure movie image quality settings and to select either normal movie recording or High Speed Movie recording For information about movie image quality settings see page 47 61 Advanced Recording Settings I Correcting Image Brightness EV Shift Procedure Enter the REC Mode MENU EV Shift You can manually adjust an image s exposure value EV value before shooting it Exposure Compensation Range 2 0 EV to 2 0 EV Unit 1 3 EV 1 Touch a level you want to set To cancel exposure compensation change the EV value to 0 0 2 1 B D ES E 2 0 4 42 0 Decreases the EV value A lower EV Increases
82. l ball Creates a mysterious effect by placing the image in a bubble floating in midair Sparkling Shot Softens the overall image and adds points of light for a sparkle effect Darkens the periphery and changes hues for a toy camera Toy Camera effect Soft Focus Blurs overall focus for a mysteriously soft effect Light Tone Weakens contrast to create an elegantly subdued effect Pop Strengthens saturation for richer colors Sepia Sepia colors are used to create a retro effect Monochrome Enhances contrast to create a grainy print effect Blurs some of the focus to make the image look like a Miniature E miniature Humorous effect that looks like it was shot with a fisheye Fisheye lens 1 In the REC mode touch the recording mode icon page 39 2 Touch fXij ART SHOT 3 Touch the ART SHOT scene you want to use Touch the arrow on the right side of the monitor screen to display another scene Touching 6 in the upper right corner of the Screen and then touching a ART SHOT scene will display detailed information about the scene 41 Recording Images 4 Touch the ART icon The intensity of the selected effect can be adjusted as described below Note however that the Miniature effect cannot be adjusted Scene Adjustment HDR Art Effect level Crystal ball Effect type Sparkling Shot Effect type Toy Camer
83. l networking service 1 On the smartphone start up EXILIM Remote In the upper right corner of the screen that appears tap Setting 2 If you plan to upload the image to a social networking service after sending it to the smartphone turn Send to SNS on Otherwise turn it off 3 On the camera touch P PLAY to enter the PLAY mode 4 Touch the i Image Send icon If the B Image Send icon is not displayed on the screen touch the tab to display it 5 Touch H Send to phone 6 Touch the images of the files you want to send to the smartphone Touching the image of a file causes its check box to become selected 7 After selecting the images of all of the files you want to send to the smartphone touch OK 8 On your smartphone start up the EXILIM Remote app This will establish a connection between your camera and the smartphone and send the files to the smartphone If the message Connect your phone to the access point below remains on the camera s monitor screen change the smartphone s Wi Fi settings so your camera is selected for connection page 86 90 Establishing a Wireless LAN Connection 9 After image send is complete perform either of the operations described below If you turned Send to SNS on in step 2 of this procedure A screen for uploading the image to a social networking service will appear on the smartphone screen after image se
84. lay an image even if itis DCF compliant When displaying an image recorded on another camera it may take a long time for the image to appear on this camera s monitor screen B Built in Memory and Memory Card Data Handling Precautions Whenever copying memory contents to your computer you should copy the DCIM folder and all of its contents A good way to keep track of multiple DCIM folders it to change their names to dates or something similar after you copy them to your computer If you later decided to return a DCIM folder to the camera however be sure to change its name back to DCIM The camera is designed to recognize only a root file with the name DCIM Note the camera also will not be able to recognize the folders inside the DCIM folder unless they have the names they originally had when you copied them from the camera to your computer Folders and files must be stored in accordance with the Memory Folder Structure shown on page 104 in order for the camera to be able to recognize them correctly 104 Using the Camera with a Computer Other Settings Set Up This section explains menu items that you can use to configure settings and perform other operations in both the REC mode and PLAY mode For information about menu operations see page 57 Adjusting Monitor Screen Brightness Screen Procedure MENU Setup Screen You can use the following procedure to change the brightness of the monitor screen
85. ling Faces that are partially or completely darkened by shadows etc Hair that is hiding or near the eyes Eye glasses Small faces Faces that are not looking directly at the camera Shooting a large group of people will cause processing of the image after shooting to take longer 53 Using BEST SHOT Shooting with High Speed Night Scene HS Night Scene With High Speed Night Scene the camera automatically detects shooting conditions When you press the shutter button the camera will record a burst of images and merge them in a way that minimizes image blur due to low light conditions 1 Select HS Night Scene scene page 50 2 When you are ready to shoot press the shutter button l NOTE With this BEST SHOT scene the LED light setting automatically becomes off When holding the camera by hand while shooting with this BEST SHOT scene make sure that the subjects remain as still as possible as the camera shoots the series of images Movement of the camera while it is placed on a surface may cause erroneous judgment that it is hand held If surroundings are extremely dark when shooting with HS Night Scene the camera may not be able to shoot at proper brightness due to insufficient exposure When shooting with this BEST SHOT scene the ISO sensitivity setting is fixed at AUTO Shooting with High Speed Anti Shake HS Anti Shake In addition to optical Anti Shake a single pr
86. lt Settings liliis 127 When things don t go right llis 129 E Tro bleshootirig s once nd Bees eee oe olet eA 129 F Display Messages ene sere ters eS Be eee ee 133 Number of Snapshots Movie Recording Time 00 00 134 Specifications 2e e eR REI NIMM ees a 136 7 Contents General Guide The numbers in parentheses indicate the pages where each item is explained Frame page 14 Memory card slot Shutter button Speaker pages 28 29 page 32 Shutter button HDMI HDMI output B Monitor screen Self portrait shutter micro page 73 pages 9 10 105 button pages 32 67 CARD HDMI cover D USB port Lens pages 28 73 pages 20 23 97 101 G Microphone Back lamp Strap hole page 2 pages 17 49 pages 21 24 30 32 BATT OPEN button LED light page 59 D C Power page 30 pages 19 19 Your camera has two shutter buttons p Battery slot page 19 Monitor Screen Contents and How to Change Them The monitor screen uses various indicators icons and values to keep you informed of the camera s status The sample screens in this section are intended to show you the locations of all the indicators and figures that can appear on the monitor screen in various modes They do not represent screens that actually appear on the camera E Snapshot Recording Tab page 30 Q Focus mode page 65 Self timer mode page 58
87. lt in a separate file The original snapshot is also retained 1 Touch lt or gt or drag left or right to display the image you want to crop 2 Touch OK 3 Drag the image until the part you want to Zoom factor keep is displayed To enlarge the image touch or touch the screen with your thumb and forefinger and then spread them apart To reduce the size of the image touch or touch the screen with your thumb and forefinger and then squeeze them Represents snapshot area together 4 Touch OK This will crop the image leaving only the displayed part Part of snapshot that is currently displayed l NOTE The image produced by cropping a 3 2 image will have an aspect ratio of 4 3 The recording date of the cropped image will be the same as the recording date of the original snapshot 83 Other Playback Functions PLAY Establishing a Wireless LAN Connection Wireless LAN Functions Establishing a wireless LAN connection between the camera and a smartphone enables the functions described below With this function You can do this eee page Remote Capture Remotely control and shoot with the 86 camera using a smartphone Send a snapshot that was just recorded with the camera to a smartphone After sending an image to a smartphone you 88 can then upload it to a social networking service Send snapshots and movies recorded
88. mer countdown The battery may be dead Charge the battery page 19 The monitor screen image is out of focus 1 You may be using Macro for scenery or portraits Use Auto Focus for scenery and portrait shots page 65 2 You may be trying to use Auto Focus or Infinity when shooting a close up shot Use the Macro for close ups page 65 There is digital noise in images 1 Sensitivity may have been increased automatically for a dark subject which increases the chance of digital noise Use a light or some other means to illuminate the subject 2 Shooting with a snapshot with a high ISO sensitivity setting can increase digital noise in the image If digital noise becomes a problem try changing the ISO sensitivity setting to a lower value A recorded image was not saved 1 Camera power may have been turned off before the save operation was complete which will result in the image not being saved If the battery indicator shows W charge the battery as soon as possible page 19 2 You may have removed the memory card from the camera before the save operation was complete which will result in the image not being saved Do not remove the memory card before the save operation is complete Though available lighting is bright the faces of people in the image are dark Not enough light is reaching the subjects Adjust EV shift to the side page 62 Night shots come out bad Use the HS Night Sce
89. monitor screen If you feel the camera is taking too long to process data try shooting with standard Auto instead In some cases Premium Auto Pro may not be able to interpret the shooting environment correctly If this happens shoot with standard Auto If Hs is displayed the camera will shoot a series of CS images and merge them into a final image Take care to avoid any camera and subject movement until shooting of all of the CS images is complete Viewing Snapshots Use the following procedure to view snapshots on the camera s monitor screen 1 Touch PLAY to enter the PLAY mode For information about how to play back movies see page 68 This will display one of the snapshots currently stored in memory f Premium Auto Pro is selected as the recording mode touch the Review image page 66 in the lower left corner of the monitor screen Information about the displayed snapshot also is included page 10 eJ PLAY You also can clear the information to view only the snapshot page 11 You can zoom the screen image by touching the monitor screen page 72 If you are recording a snapshot that is very important to you it is recommended that you zoom the image and check its details after recording it 34 Quick Start Basics 2 Touch lt or gt or drag left or right across the screen image to scroll through the snapshots To scroll at high speed touch and hold
90. movie into two movies and splicing of two different movies into a single movie are not supported Viewing Snapshots and Movies 70 g P Viewing a Panorama Image 1 Touch PLAY to enter the PLAY mode 2 Touch lt or gt or drag upwards or downwards to display the panorama image you want to view To scroll at high speed touch and hold lt or gt 3 Touch to play the panorama Panorama playback causes the image to scroll left right up or down Playback Controls Pause Play Touch II pause or p play Stop playback During playback touch W Scroll the panorama image While playback is paused drag the screen Information display on off Touch the screen l NOTE The following functions cannot be performed on a panorama image Movie Editing Rotation 71 Viewing Snapshots and Movies Viewing the Image Menu The image menu shows multiple images on a single screen 1 In the PLAY mode touch gg This displays the image menu Touch A or V or drag upwards or downwards to scroll to the next page of images To view the normal single image display mode touch the image your want to view or touch LI n the case of a movie the first image in the movie is displayed A question mark will be displayed for images that cannot be displayed for some reason Zooming an On screen Image Snapshot
91. ms on the menu that appears may not be usable Recording Images 38 g g Selecting a Recording Mode The camera has a variety of different recording modes 1 Inthe REC mode touch the recording mode icon Ifthe icon is not displayed on the screen touch the tab to display it 2 Touch the icon of the recording mode you want to use Recording mode icon This enters the selected recording mode Auto Standard Auto recording mode This is the mode normally used for shooting page 31 Premium Auto Pro With Premium Auto Pro recording the camera automatically determines whether you are shooting a subject or scenery and other conditions Premium Auto Pro recording delivers higher image quality than standard Auto recording mode page 31 Posing Shot Posing Shot lets you shoot five successive snapshots as the camera provides voice guidance page 40 With BEST SHOT simply select the sample scene that resembles the type of shot you want and the camera ERAT SIMI automatically configures ideal settings for the subject and shooting conditions page 50 A variety of artistic effects help to make even common ART SHOT ordinary subjects become more novel and exciting page 41 Make up Make up smoothes the skin texture of the subject and Softens facial shadows caused by harsh sunlight for better looking portraits page 43 39 Recording Images i Shooting with Pos
92. na Dru MER adderet eun pcdes ER Nego n 68 W Editing a Movie on the Camera lusus Movie Editing 70 Viewing a Panorama Image 0 00 e eee eee 71 Viewing the Image Menu 0 0000 cece eee eee 72 Zooming an On screen Image 0 0 eee eee 72 Viewing Snapshots and Movies on a TV Screen 20000000 73 lBllOther Playback Functions PLAY 75 Using the PLAY Menu 00 0c c e ne 75 W Creating a Promotion Movie s sues Promotion Movie 75 W Performing Paint Operations on an Image 4 Paint 77 W Playing a Slideshow on the Camera isse Slideshow 78 W Extracting an Image from a Snapshot Cut out subject 78 W Inserting a Subject into another Snapshot or Adding a Built in Frame to a Snapshot Paste subject 80 W Protecting a File Against Deletion 0 000 Protect 81 W Rotating an Image 02 cece ee Rotation 82 B Resizing a Snapshot 0 0 0 c eee Resize 82 E Cropping a Snapshot 0 0 00 c cece eee Trimming 83 Contents Establishing a Wireless LAN Connection 84 Wireless LAN Functions 0 0 0 cece eee eee 84 Establishing a Connection between a Smartphone and Your Camera 85 W Installing the EXILIM Remote App on Your Smartphone 85 E Configuring Wireless LAN Settings
93. nction Number of Snapshots Movie Recording Time Snapshot Image Size Approximate Built in Memory M eee ate Pixels File Size Recording Capacity Recording Capacity 12M 40003000 4 13 MB 7 2286 3 2 40002656 3 62 MB 8 2728 5M 2560X1920 1 72 MB 14 4283 VGA 640X480 290 KB 87 26809 Appendix 134 Movies Maximum i Built in Recording File Size Continuous Image e a eta Maximum Memory Time with of Recording Audio Frame Rate File Size Recording microSD 1 minute Time per Capacity Memory Movie Movie Card 14 2 Megabits Full HD 2 hours 1920x1080 Second 26 seconds 44 minutes 106 5 MB 29 minutes 30 frames af Monaural second 55 seconds 10 9 Megabits HD second 4 GB or 2 nour 1280X720 34 seconds 56 minutes 81 8 MB 29 minutes 30 frames 29 minutes Monaural second 25 seconds 40 0 Megabits Brem second 9 seconds 48 minutes 300 0 MB 12 minutes No audio 240 frames 5 seconds 58 seconds second Built in memory capacity after formatting Approx 49 9MB 2 When using a 16GB microSDHC memory card SanDisk Corporation Number of image and recording time values depend on the memory card you are using 3 The allowable recording time will be shorter if the capacity of the microSD memory card you are using is smaller than the maximum size of one file 4 The data transfer rate of built in memory i
94. nd from the camera is complete The wireless LAN between the camera and smartphone will be disconnected at this time On the social networking service upload screen select the service you want to upload to If you turned Send to SNS off in step 2 of this procedure After image send is complete tap OK on your smartphone The connection between your camera and the smartphone will be terminated automatically after the send operation is complete xt IMPORTANT l NOTE Some smartphone models may not be able to play back movie files Depending on your smartphone model its operating system version and or its remaining storage capacity can cause failure of a movie or snapshot save operation After send operation perform the required operation on your smartphone to ensure that the movie or snapshot was saved properly Viewing a movie received on an Android terminal Note that movies are not displayed by Gallery Movies are stored in a folder named EXILIM Remote A separate movie player is required to playback movies whose files have the file name extension MOV Depending on your movie player you may not be able to playback movies and or audio You can specify the size of the snapshots sent to the smartphone using Resize before send page 92 You can use the smartphone apps below to view snapshots after sending them iPhone Camera Roll Android terminal Gallery or another photo browser app 91 Establish
95. ne BEST SHOT scene page 50 when shooting at night Subjects are too dark when shooting images in a seashore or ski area Sunlight reflected by water sand or snow can cause underexposure of images Adjust EV shift to the side page 62 Appendix 130 Problem Possible Cause and Recommended Action The image is out of focus during movie recording 1 Focusing may not be possible because the subject is outside the focus range Shoot within the allowable range 2 The lens may be dirty Clean the lens page 120 3 During High Speed Movie recording focus is fixed at the position where it was when recording started To focus an image half press the shutter button for Auto Focus before you touch Movie to start recording can t change the settings of menu items Menu items for some settings are not displayed on the menu Some menu items may not be available depending on the recording mode in use While Premium Auto Pro is in use only the menu items whose settings can be configured will be displayed on the menus Playback The color of the playback image is different from what appears on the monitor screen when shooting Sunlight or light from another source may be shining directly into the lens when you are shooting Position the camera so sunlight does not shine directly into the lens Images are not displayed This camera cannot display non DCF image
96. ned and the LCD monitor screen rotated into positions that make long term shooting more comfortable and simplify self shooting See page 14 for more information Simple touch panel operation The monitor screen is a touch panel that can be used to perform operations See page 17 for more information Simple self portrait shooting The monitor screen can be rotated so it faces in the same direction as the camera s lens making self shooting much easier See page 46 for more information Make Up Make up smoothes the skin texture of the subject and softens facial shadows caused by harsh sunlight for better looking portraits See page 43 tor more information Posing Shot Posing Shot lets you shoot five successive snapshots as the camera provides voice guidance See page 40 for more information 12 Quick Start Basics ART SHOT A variety of artistic effects help to make even common ordinary subjects become more novel and exciting ART SHOT provides the following effects HDR Art Crystal ball Sparkling Shot Toy Camera Soft Focus Light Tone Pop Sepia Monochrome Miniature Fisheye See page 411 for more information Extract a subject from one photo and insert it into another You can extract a person or object out of one snapshot and insert into another snapshot or you can add a built in frame to a snapshot gt See pages 78 80 for
97. nplug the USB cable or operate the camera while viewing or storing images Doing so can cause data to become corrupted l NOTE You also can use your computer s card slot if it has one or a commercially available card reader to access image files directly from the camera s memory card For details see the user documentation that comes with your computer E To connect the camera to your computer and save files 1 Turn off the camera and then USB port use the micro USB cable that comes with the camera to connect it to your computer For details about connecting to the camera and precautions when connecting see page 23 j Micro USB cable included with camera 2 Press Power to turn on the camera When you turn on the camera check to make sure that the color of its back lamp changes from red to green or orange page 24 The first time you connect the camera to your computer with the USB cable an error message may appear on your computer If this happens disconnect and then reconnect the USB cable 3 Windows 8 users Click Desktop and then Explorer Windows 7 Windows Vista users Click Start and then Computer Windows XP users Click Start and then My Computer 97 Using the Camera with a Computer Double click Removable Disk Your computer recognizes the memory card loaded in the camera or built in memory if there is no card a
98. nt images stored on a computer This section shows one standard printing example E Printing on a Windows Computer 1 Use the procedure under Viewing and Storing Images on a Computer page 97 to store the image you want to print and then display the image on your computer screen 2 Windows XP users Click File and then Print Windows 8 Windows 7 Windows Vista users Click Print and then Print 3 Configure the desired print settings and then print Windows XP users Follow the instructions on the print wizard that appears configure settings and then print Windows 8 Windows 7 Windows Vista users Configure print settings and then click Print 94 Printing BW Printing on a Macintosh 1 Use the procedure under Connecting the Camera to Your Computer and Saving Files page 100 to store the image you want to print and then display the image on your Macintosh screen 2 Click File and then Print 3 Configure print settings and then click Print This will print the selected image 95 Printing Using the Camera with a Computer Things you can do using a computer You can perform the operations described below while the camera is connected to a computer Save images to a computer and view them there Save images and view them manually USB connection pages 97 100 Play back and edit movies You can play back movies pages 99 102 To edit movies us
99. o Motion Shutter standby to wait for the next trigger movement l NOTE The trigger time of the Motion Shutter self timer is fixed at two seconds The preview icon will appear on the monitor screen when a snapshot is shot When the camera detects movement within the preview icon it will display the image that was shot for three seconds Motion Shutter exits standby automatically after it shoots six images To cancel Motion Shutter standby at any time press the shutter button or touch the monitor screen Motion Shutter may not operate properly when there is little difference in the color of the subject and the color of the background enclosed by the boundary or when the subject is located far away from the camera making it too small Digitally Correcting for Overexposure and Underexposure HDR With HDR High Dynamic Range the camera shoots a series of CS images using different exposure settings and combines them into a final image to correct for overexposure or underexposure of subjects of different brightness levels 1 Select HDR scene page 50 2 Press the shutter button to shoot l NOTE This function works best when the camera is made stationary by placing it on a level surface etc With this BEST SHOT scene the LED light setting automatically becomes off The desired HDR effect may not be attained if the camera or subject moves during shooting 52 Using BEST SHOT Shooting Cle
100. o blank Touching the monitor screen will cause its image to reappear 92 Establishing a Wireless LAN Connection 4 On the smartphone start up its browser app The browser will automatically access the URL displayed by the camera in step 3 of this procedure and then display an image stored in camera memory If no camera image appears automatically manually input the URL into the browser To exit the wireless LAN function touch Exit on Men letra the camera s monitor screen View on phone http llexilim remotel URL Ei IMPORTANT Some smartphone models may not be able to play back movie files l NOTE You can also view image in camera memory on a computer s browser by establishing a wireless LAN connection with the computer 93 Establishing a Wireless LAN Connection Printing Professional Print Service You can take a memory card that contains the images you want to print to a professional print service and have them printed d Tr Printing on a Home Printer You can use a printer equipped with a memory card slot to print images directly from a memory card For details ED GSS see the user documentation that comes with your D J e printer Printing with a Computer After transferring the images to your computer use 117 commercially available software to print LI Ss PA Printing with a Computer There are a variety of different ways to pri
101. ommercial purposes of the software provided by CASIO for this product are prohibited 122 Appendix OpenVG 1 1 Reference Implementation Copyright c 2007 The Khronos Group Inc Permission is hereby granted free of charge to any person obtaining a copy of this software and or associated documentation files the Materials to deal in the Materials without restriction including without limitation the rights to use copy modify merge publish distribute sublicense and or sell copies of the Materials and to permit persons to whom the Materials are furnished to do so subject to the following conditions The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Materials THE MATERIALS ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM DAMAGES OR OTHER LIABILITY WHETHER IN AN ACTION OF CONTRACT TORT OR OTHERWISE ARISING FROM OUT OF OR IN CONNECTION WITH THE MATERIALS OR THE USE OR OTHER DEALINGS IN THE MATERIALS 123 Appendix Power Supply i Charging E If the camera s back lamp starts flashing red If the back lamp starts flashing red during charging it means that further charging is not possible for one of the reasons below Perform the acti
102. ompose the image so the main subject is in the center of the image when using the LED light Since the camera is equipped with a wide angle lens the center tends to be brighter while the periphery tends to be darker Advanced Recording Settings 59 g g i Changing the Image Size Image Size Procedure Enter the REC Mode MENU Image Size This setting can be used to configure snapshot image size Jupes Ree soe Sia as Description Pixels Icon Display Application TM Poster Print 4000X 3000 Good detail for better clarity even for images cropped from the 3 2 original on a computer etc 4000x2656 Poster Print 5M 2560X1920 E A4 Print Good detail Image files are smaller which is VGA better when attaching images to e 640X480 Eval mail However images are relatively coarser The initial factory default image size setting is 12M 12 million pixels Selecting 3 2 records images with an aspect ratio of 3 2 which matches the standard aspect ratio of print paper You should regard the print paper sizes suggested here as guidelines only 200 dpi print resolution Advanced Recording Settings 60 PE B Pixels and image size A digital camera image is a collection of small Pixel dots called pixels The more pixels there are MW NW Ww in an image the more detail there will be However you generally can do with fewer pixels when printing an image L s
103. on Shutter to Trigger a Self timer Operation Motion Shutter 51 Digitally Correcting for Overexposure and Underexposure HDR 52 Shooting Clearer Snapshots 5 Multi SR Zoom 53 Shooting with Priority on Subject Faces HS Best Selection 53 Shooting with High Speed Night Scene HS Night Scene 54 Shooting with High Speed Anti Shake HS Anti Shake 54 Shooting a Panorama Image Slide Panorama 55 Advanced Recording Settings 57 Using the REC Menu 2 00000 57 W Using Touch Shutter 0 0 00 c eee eee eee Touch Shutter 58 W Using the Self timer llli Self timer 58 F Using the LED Eight desereret Nee P AER LED 59 W Changing the Image Size 00 eee Image Size 60 BH Movie Image Quality Settings 00 Movie Quality 61 W Correcting Image Brightness 00 0 eee eee EV Shift 62 W Adjusting White Balance sees White Balance 63 W Specifying ISO Sensitivity llle ISO 64 W Selecting a Focus Mode sees Focus 65 W Turning on Image Review 0 000 cece eee Review 66 E Checking a Snapshot before Saving It Self portrait check 67 BllViewing Snapshots and Movies 68 Viewing Snapshots virei naien ia a x eiue eu Lived eme 68 Viewing a Movie siga
104. ons described below to correct the problem and then try charging again Ambient temperature or the temperature of the battery is abnormally high or low Unplug the USB cable from the camera and wait for a while until the camera is within the temperature range of 15 C to 35 C 59 F to 95 F and then try charging again Safety timer activated A battery that has not been used for a long time certain types of computers and connection conditions can cause charging to take longer than normal If charging takes longer than about five hours a safety timer will terminate it automatically even if the battery is not fully charged If the battery has not been used for a very long time charging may terminate automatically after only about 60 minutes 1 Using a battery that has not been used for a long time Disconnect and then reconnect the USB cable to resume charging 2 Insufficient power supply when connected to computer The camera can be charged only via a USB 2 0 standard USB port Connect directly to a USB port what supplies a current of 500mA For details about the power supply capacity of a computer s USB port contact the manufacturer of the computer Though disconnecting and then reconnecting the USB cable will resume charging you may need to do so repeatedly if the power supply capacity of the computer is low If problems persist after you perform the above steps or if the battery fails to charge after 5 hours it could mean t
105. ot be possible for data accessed over a network from a memory card etc Proper movie playback may not be possible on some computers If you experience problems try the following Quit any other applications you have running and stop resident applications 99 Using the Camera with a Computer Using the Camera with a Macintosh When you want to do Operating System Reauiredisoware See this Version q i page Save images to your Macintosh and view OSX Installation not required 100 them there manually Save images to your iPhoto which comes Macintosh OS x bundled with some automatically Manage Macintosh products images QuickTime which comes Play movies OSX bundled with your operating 102 system i Connecting the Camera to Your Computer and Saving Files Never use your computer to modify delete move or rename any image files that are in the camera s built in memory or on its memory card Doing so can cause problems with the camera s image management data which will make it impossible to play back images on the camera and can drastically alter remaining memory capacity Whenever you want to modify delete move or rename an image do so only on images that are stored on your computer E IMPORTANT Never unplug the USB cable or operate the camera while viewing or storing images Doing so can cause data to become corrupted The camera does not support operation w
106. other liquid container on top of the USB AC adapter Water creates the risk of fire and electric shock Do not touch the camera or USB AC adapter during lightning storms eoe OO If a power cord was included with your camera The power cord that comes with the camera is designed for use in the country where the camera was purchased If you use the camera in another country be sure to use a power cord that conforms to that country s ratings and power supply voltage Use of an improper power cord creates the risk of fire and electric shock Before going out be sure to unplug the USB AC adapter from the power outlet and put in a place away from objects used by animals and pets o An animal or pet chewing on the power cord can cause it short leading to the risk of fire E Water and Foreign Matter Water other liquids or foreign matter especially metal getting inside a q g esp y getting Q the camera creates the risk of fire and electric shock Immediately perform the following steps whenever any of the above symptoms are present Particular care is required when using the camera where it is raining or snowing near the ocean or other body of water or in a bathroom 1 Turn off the camera 2 If you are using the USB AC adapter to power the camera unplug the power plug from the power outlet Also remove the battery from the camera taking care to protect yourself against burn injury 3 Contact your retailer or near
107. other media CD R CD RW hard disk etc E Memory Card Handling Precautions Certain types of memory cards can slow down processing speed Whenever possible use an Ultra High Speed Type memory card Note however that not all operations can be guaranteed even if an Ultra High Speed Type memory card is used Certain movie quality settings can result in too much time being required to record data which can result in breaks in the image and or audio during playback If this happens the movie icon will turn yellow on the monitor screen 126 Appendix Reset Initial Default Settings The tables in this section show the initial default settings on menus that appear in the REC mode and PLAY mode when you reset the camera page 111 A dash indicates an item whose setting is not reset or an item for which there is no reset setting xx IMPORTANT Some menu items may not be available depending on the recording mode being use E REC Menu Touch Shutter Off ISO Auto Self timer Off Focus AF LED Off Review Type 2 Image Size 12M Self portrait Off Movie Quality Full HD dreds EV Shift 0 0 Setup See below White Balance Auto Default setting depends on country or geographic region E PLAY Menu Promotion E Protect Movie Rotation pani Resize Slideshow Trimming i ELM Setup gt See below Paste subject 127 Appendi
108. out how to establish a wireless LAN connection see the user documentation that comes with your smartphone Using a Smartphone as a Camera Remote Controller Remote Capture This function lets you remotely shoot a snapshot or movie with the camera using a smartphone You also can perform remote zoom self timer and other operations as well 1 On your camera enter the REC mode and then touch the fj Remote Capture icon If the B Remote Capture icon is not displayed on the screen touch the tab to display it 2 On your smartphone start up the EXILIM Remote app This will establish a connection between the smartphone and your camera About 60 seconds after your camera establishes a connection with the smartphone the camera s monitor screen will go blank and its back lamp will light green If the message Connect your phone to the access point below remains on the camera s monitor screen change the smartphone s Wi Fi settings so your camera is selected for connection page 86 86 Establishing a Wireless LAN Connection 3 Compose the image on your smartphone s screen as you shoot After you are finished using Remote Capture touch Exit on the camera or exit the app on your smartphone E IMPORTANT For snapshots Premium Auto Pro is automatically selected as the recording mode while shooting with Remote Capture You cannot shoot with BEST SHOT or other recording modes The Movie Qual
109. p 576p format output 1080i corresponds to 1080 60i but not 1080 50i Because of this the required output method may be 576p when outputting to a digital TV in a PAL reception area that does displayed If an imag changing not support 1080i 60i If you are in a PAL reception area and nothing is automatically change the setting to 576p e does not appear when Auto is selected as the output method try this setting to something else 109 Other Settings Set Up Changing the Camera Password for Wireless LAN Connection WLAN password Procedure MENU Setup WLAN password Use procedure to change the password you used when establishing a wireless LAN connection between the camera and a smartphone 1 Touch the password digit you want to change 2 Touch A and Y to change the currently selected digit 3 When the password is the way you want touch OK l NOTE Note that after changing the wireless LAN password on the camera you will also need to change the Wi Fi settings of the smartphone iPhone Tap the right arrow of the field where the SSID of the camera is displayed in the Wi Fi settings to delete network settings After deleting select the camera SSID again and input the new password Android terminal Touch the field where the SSID of the camera is displayed in the Wi Fi settings and select Forget Select the camera SSID again and input the new password Displaying a St
110. promotion movie Selecting a portrait orientation snapshot with the Transition setting enabled On will trim the top and bottom of the image with the bottom portion somewhat larger than the top When Transition is disabled Off black bands will appear on the sides of the image This function cannot be used for fewer than five images 76 Other Playback Functions PLAY i Performing Paint Operations on an Image Paint Procedure Enter the PLAY Mode Display snapshot MENU Paint You can use this function to draw on write on or stamp information into a recorded snapshot If the original image size is 3M or larger the post paint image is saved as a 3M size image 1 Onthe right side of the monitor screen touch m or amp I 2 Touch the pen type or the stamp you want to use 3 Use the pen to write text or draw figures or use the stamp to stamp information The stamp will be located at the final position your finger is in when you remove it from the screen Before removing your finger you can drag the stamp to the location you want Touch OK Touch Yes This will save the image as a new image B Paint Functions Exits paint without saving an image For selecting the pen color and thickness for drawing or writing Also can be used to select the eraser and its thickness For selecting the stamp type Goes back to the previous screen Sav
111. ra Do not leave batteries near areas used by pets A pet chewing on a battery can lead to accidents caused by the battery leaking overheating or exploding Should fluid from a battery accidentally get onto clothing or your skin immediately rinse it off with clean tap water Prolonged contact with battery fluid can cause skin irritation B Connections Never plug any devices that are not specified for use with this camera into connectors Connecting a non specified device creates the risk of fire and electric shock B Unstable Locations Never place the camera on an unstable surface on a high shelf etc Doing so can cause the camera to fall creating the risk of personal injury oo eo ee 117 Appendix ZN CAUTION E Locations To Be Avoided Never leave the camera in any of the following types of locations Doing so creates the risk of fire and electric shock Areas subject to large amounts of humidity or dust Food preparation areas or other locations where oil smoke is present Q Near heaters on a heated carpet in areas exposed to direct sunlight in a closed vehicle parked in the sun or other areas subject to very high temperatures B Monitor Screen Do not apply strong pressure to the LCD panel surface or subject it to strong impact Doing so can cause the display panel glass to crack and lead to personal injury Should the monitor screen ever become cracked never touch any of the liquid
112. rding operation is in progress Due to the characteristics of the imaging element used by the camera very fast moving objects in an image may appear distorted Bl Auto Focus Restrictions Any of the following can make proper focus impossible Solid color wall or other very low contrast subject Strongly back lit subject Very shiny subject Blinds or other subject with a repeating horizontal pattern Multiple subjects at varying distances from the camera Subject in a dark location Camera movement while shooting Fast moving subject Subjects outside the focus range of the camera If you cannot focus properly try using focus lock page 66 37 Quick Start Basics Recording Images Touching the monitor screen in the REC mode will display a screen for configuring REC mode settings E To configure REC mode settings 1 Press Power to turn on the camera and enter the REC mode If the camera is in the PLAY mode touch REC to enter the REC mode ot 0 Power 2 Touch the item whose setting you want to change If there are no icons along the left side of the screen touch the tab to display them Tab page 30 Menu page 57 Recording mode page 39 Remote capture page 86 Information page 11 9 PLAY mode Make up Level pages 30 43 Zoom page 44 Quick send page 88 Movie page 47 Depending on the recording mode some of the ite
113. re not using HDMI output The camera s monitor screen may not operate normally while the HDMI cable is connected Audio is monaural Audio is initially output by the camera at maximum volume When you first start displaying images set the TV volume control at a relatively low level and then adjust it as required To select the digital signal format see page 109 74 Viewing Snapshots and Movies Other Playback Functions PLAY The following are menu operations you can use to configure various camera settings Using the PLAY Menu E Example Menu Screen Operation 1 In the PLAY mode touch MENU This will display the menu screen If MENU is not displayed on the screen touch the tab to display it Menu contents are different in the REC mode and PLAY mode 2 Touch the item whose setting you want to change 3 Configure the setting of the item in accordance with the screen contents To cancel and exit the menu touch MENU or press the shutter button B Menu Operations in This Manual Menu operations are represented in this manual as shown below Touch the indicated icons and items and perform operations as they are indicated from left to right Procedure Enter the PLAY Mode MENU Protect J Creating a Promotion Movie Promotion Movie Procedure Enter the PLAY Mode Display snapshot MENU Promotion Movie With this function you can select five snapshots
114. recorded with this setting is 16 9 Select this setting to record high definition HD movies HD 30fps 1280X720 The aspect ratio of movies recorded with this setting is 16 9 Select this setting to record high speed movies at a speed HS240 E 240fps 512X384 of 240 fps Audio is not recorded 4 To close the menu screen touch MENU or press the shutter button 47 Recording Images 5 Touch Movie Recording time This will start recording Remaining recording time Monaural audio is also recorded during movie recording while Full HD or HD is selected for the movie quality setting Touching 4 while recording is in progress will cause the remaining recording time and R to appear Touch amp again to switch back to the elapsed recording time When Full HD or HD is selected as the movie quality you can perform a zoom operation while recording is in progress by touching the zoom icons When Macro is selected as the movie focus mode page 65 you can half press the shutter button before starting recording to focus Movie Movie Stop 6 Touch O Movie Stop to stop recording Each movie can be up to 29 minutes long Movie recording stops automatically after 29 minutes of recording Movie recording also will stop automatically if memory becomes full before you stop movie recording Minimizing the
115. rning off the camera Disconnecting the USB cable while communication is in progress Shooting with a battery that quickly goes low right after it is charged Shooting with a battery that quickly goes low right after it is charged can also cause camera malfunction Replace the battery with a new one immediately Other abnormal operations Any of the above conditions can cause an error message to appear on the monitor screen page 133 Perform the action indicated by the message that appears E Operating Environment Operating Temperature Requirements 0 to 40 C 32 to 104 F Operating Humidity 10 to 85 non condensation Do not place the camera in any of the following locations n an area exposed to direct sunlight or large amounts of moisture dust or sand Near heating or cooling devices or in other areas subjected to extreme changes in temperature or humidity Inside of a motor vehicle on a hot day or in an area subjected to strong vibration E Condensation Sudden and extreme temperature changes such as when the camera is moved from the outdoors on a cold winter day into a warm room can cause water droplets called condensation to form on the interior and the exterior of the camera which creates the risk of malfunction To prevent condensation from forming seal the camera in a plastic bag before changing locations Then leave the bag sealed to allow the air inside to naturally change to the same temp
116. s a removable disk Right click the DCIM folder On the shortcut menu that appears click Copy Windows 8 users Click Documents Windows 7 Windows Vista users Click Start and then Documents Windows XP users Click Start and then My Documents f you already have a DCIM folder in Documents Windows 8 Windows 7 Windows Vista or My Documents Windows XP the next step will overwrite it If you want to keep the existing DCIM folder you need to change its name or move it to a different location before performing the next step Windows 8 users On the Documents menus click Home and then Paste Windows 7 users On the Documents Organize menu select Paste Windows Vista users On the Documents Edit menu select Paste Windows XP users On the My Documents Edit menu select Paste This will paste the DCIM folder and all the image files it contains into your Documents Windows 8 Windows 7 Windows Vista or My Documents Windows XP folder You now have a copy of the files that are in camera memory on your computer After you finish copying images disconnect the camera from the computer On the camera press Power to turn off the camera After checking to make sure that the back lamp is unlit or lit red disconnect the USB cable B To view images you copied to your computer 1 Dou
117. s can be zoomed on the monitor screen up to 8X The actual available zoom factors depend on the size of the original image 1 In the PLAY mode touch lt or gt or drag left or right to display the image you want to view 2 Spread your thumb and forefinger page 18 Zoom factor on the displayed image to enlarge it Dragging an enlarged screen image will change Image area the part of the image that is displayed Squeezing your thumb and forefinger page 18 on the displayed image will reduce it in size When monitor screen contents are turned on a graphic in the lower right corner of the screen shows what part of the zoomed image is currently displayed Touching lt or gt while an enlarged image is displayed will scroll to the next sequential image while maintaining the current zoom factor To return to normal single image display touch Current display area 72 Viewing Snapshots and Movies Viewing Snapshots and Movies on a TV Screen Use a commercially available HDMI cable to connect the camera to the TV f LJ IT p Use a commercially available HDMI cable that is marked with the logo shown to the HIGH DEFINITION MULTIMEDIA INTERFACE right 1 Open the frame page 14 CARD HDMI cover 2 Hook your nail into the groove of the CARD HDMI cover and pull the cover in the direction indicated by the arrow to open it 3 Turn off the camera and
118. s not sufficient for Full HD movies Whenever possible use an Ultra High Speed Type memory card Snapshot and movie recording capacity values are approximate and intended for reference only Actual capacity depends on image contents File size and data rate values are approximate and intended for reference only Actual values depend on the type of image being shot When using a memory card with a different capacity calculate the number of images as a percentage of 16GB The time it takes to play back a high speed movie will be different from the time it takes to record it If you record a high speed movie for 10 seconds for example it will take 80 seconds to play it back Each movie can be up to 29 minutes long Movie recording stops automatically after 29 minutes of recording 135 Appendix Specifications File Format Snapshots JPEG Exif Version 2 3 DCF 2 0 standard Movies MOV format H 264 AVC standard IMA ADPCM monaural Recording Media Built in Memory Image Storage Area 49 9MB microSD microSDHC microSDXC Built in memory capacity after formatting Recorded Image Sizes Snapshots 12M 4000X3000 3 2 40002656 5M 25601920 VGA 640480 Movies Full HD 19201080 30 fps HD 1280X720 30 fps HS240 512384 240 fps Effective Pixels 12 1 Megapixels Imaging Element Size 1 2 3 inch square pixel high speed CMOS Total Pixels 12 76 Megapixels Lens Focal Distanc
119. s recorded onto a memory card using another digital camera Images cannot be rotated Note that you cannot edit the following types of snapshots Panorama images Snapshots recorded with another camera Extracted subjects File Deletion A file cannot be deleted The file may be protected Unprotect the file page 81 Appendix 131 Problem Possible Cause and Recommended Action Wireless LAN can t establish a wireless LAN connection The wireless LAN connection is 1 The camera cannot connect with a smartphone if they are too far apart from each other 2 The smartphone may be connected with another wireless LAN Check the smartphone s Wi Fi settings and confirm that the camera is selected for wireless LAN connection broken page 86 3 Connection may have been lost due to interference caused by a nearby microwave oven cordless phone or other wireless LAN device Move the camera away from the device causing the problem Other The wrong date and time are displayed or the wrong date and time are being stored along with image data The date and time setting is off Set the correct date and time page 108 The messages on the display are in the wrong language The wrong display language is selected Change the display language setting page 109 Images cannot be transferred over a USB connection 1 The USB cable may not be connected sec
120. selected for connection page 86 88 Establishing a Wireless LAN Connection 7 After image send is complete perform either of the operations described below If you turned Send to SNS on in step 2 of this procedure A screen for uploading the image to a social networking service will appear on the smartphone screen after image send from the camera is complete The wireless LAN between the camera and smartphone will be disconnected at this time On the social networking service upload screen select the service you want to upload to If you turned Send to SNS off in step 2 of this procedure After image send is complete tap OK on your smartphone The connection between your camera and the smartphone will be terminated automatically after the send operation is complete l NOTE You can specify the size of the image sent to the smartphone using Resize before send page 92 You can use the smartphone apps below to view snapshots after sending them iPhone Camera Roll Android terminal Gallery or another photo browser app 89 Establishing a Wireless LAN Connection Sending a Snapshot or Movie File from Camera Memory to a Smartphone Send to phone You can select one more snapshot and or movie file in camera memory and send it to a smartphone You can select up to 100 files totaling no more than 500MB for a single send After sending an image to a smartphone you can then upload it to a socia
121. snapshots Viewing a Movie 1 Touch amp PLAY to enter the PLAY mode Image quality E Movie icon 2 Touch lt or gt or drag left or right across the screen image to scroll through the movies until the one you want is displayed To scroll at high speed touch and hold lt or Movie recording time 3 Touch p Movie to start playback Playback in progress Playback paused LI 00 00 29 ei Progress bar Viewing Snapshots and Movies 68 g P Movie Playback Controls Pause Play Touch Il pause or p gt play During playback touch lt q fast reverse or pp fast forward Each touch of either button increases the speed of the fast forward or fast reverse operation To return to normal playback speed touch p gt Fast forward Fast reverse Stop playback During playback touch W During playback touch 45 and then drag the volume bar to the desired level Volume can be adjusted only while movie playback is in progress Volume adjustment While playback is paused touch Jp or 4P Touching and holding this icon advances frames continuously 1 frame forward back Information display onloff Touch the screen Pause movie play at the location where you want to cut Meis editing and then touch 3 page 70 Playback may not be possible for movies not recor
122. t 2 Remove the battery from the camera and then reload it charge page 20 Image Recording Image is not recorded when the shutter button is pressed 1 If the camera is in the PLAY mode touch gy REC to enter the REC mode 2 If the message Memory Full appears transfer images to your computer delete images you no longer need or use a different memory card Auto Focus does not focus properly 1 If the lens is dirty clean it off 2 The subject may not be in the center of the focus frame when you compose the image 3 You may be moving the camera when shooting Try shooting with the HS Anti Shake BEST SHOT scene place the camera on a tabletop or some other stable surface or find some way to fix the camera in place 4 You may be pressing the shutter button all the way without waiting for Auto Focus Half press the shutter button and allow enough time for Auto Focus to focus Appendix 129 Problem Possible Cause and Recommended Action The subject is out of focus in the recorded image The image may not be focused properly When composing the image make sure the subject is located inside the focus frame The LED light does not light 1 If the battery is dead charge it page 19 2 LED light operation is disabled automatically whenever you are shooting with a BEST SHOT scene and HDR Art Select a different recording mode page 39 Camera powers down during Self ti
123. t a snapshot 1 Point the camera at the subject Movie capacity If you are using Premium Auto Pro text will recording time appear in the lower right corner of the monitor Snapshot capacity Screen describing the type of shot the camera has number of shots detected TAN FHD Touch the zoom icons to change the zoom factor page 44 ms Type of shot Jn Telephoto Wide Angle Zoom icons 2 Half press the shutter button to focus Shutter buttons the image l When focus is complete the camera will beep the back lamp will light green and the focus frame will turn green Half press de Press lightly until d the button stops Back lamp Focus frame Beep beep Image is in focus When you half press the shutter button the camera automatically adjusts exposure and focuses on the subject it is currently pointed at Mastering how much pressure is required for a half press and a full press of the shutter button is an important technique for good looking images 32 Quick Start Basics 3 Continuing to keep the camera still Full press press the shutter button the rest of the way down This records the snapshot Snap Image is recorded Recording a Movie Touch Movie to start movie recording Touch Movie Stop to stop recording See page 47 for details Movie Movie Stop
124. te that even while the connector is fully inserted you still will be able to see the metal part of the connector as shown in the illustration 22 Quick Start Basics E To charge using a USB connection to a computer USB connection lets you charge the battery while it is loaded in the camera While the camera is turned off connect in the sequence shown below D 2 Computer USB port power turned on USB port ei Micro USB cable included with camera lt mark of the small micro USB connector facing the side opposite that of the monitor screen Ee If the camera is on press D Power to turn it off before connecting it to your computer Charging time Approximately 170 minutes at IMPORTANT The first time you connect the camera to your computer with the USB cable an error message may appear on your computer If this happens disconnect and then reconnect the USB cable A battery that has not been used for a long time certain types of computers and connection conditions can cause charging to take more than approximately five hours which will trigger a timer that terminates charging automatically even if the battery is not fully charged If this happens disconnect and then reconnect the USB cable to restart charging To complete charging faster use of the included USB AC adaptor is recommended If the battery has not been used for a very long time charging
125. tion as the lens page 14 2 Select Auto Premium Auto Pro or Make up for the recording mode pages 31 43 Drag X Self timer downwards to specify the self timer countdown duration The camera will shoot an image when the countdown reaches zero You can set a self timer countdown duration within the range of two to ten seconds The further you drag the longer the duration To cancel an ongoing countdown touch anywhere on the screen except where the self timer icon is displayed Pressing the shutter button during an ongoing countdown will cancel the countdown and shoot an image 46 X Self timer Recording Images To record a movie The following procedure explains how to record a movie MENU You can record a movie while one of the following recording modes is selected Auto Premium Auto Pro BEST SHOT HS Night Scene Make up 1 In the REC mode touch MENU If MENU is not displayed on the screen touch the tab to display it 2 Drag upwards and downwards until you find Movie Quality and then touch to select it 3 Touch the item whose setting you want to change Movie REC Screen Frame Image Size Quality Icon Display Rate Pixels Description Select this setting to record full high definition Full HD Full HD FHD 30fps 1920X1080 movies The aspect ratio of movies
126. touch Movie to start recording Zoom operations are not supporting during Slide Panorama shooting The zoom setting is fixed at full wide angle Q is displayed on the monitor screen while digital zoom is being used 44 Recording Images B Zoom Factor The image deterioration point depends on the image size page 60 and recording mode page 39 The smaller the image size the higher the zoom factor you can use before reaching the image deterioration point Auto Premium Auto Pro Motion Shutter Undeteriorated Maximum ERE SMS Zoom Limit Zoom Factor 12M 1 5X 4 0X 3 2 5M 2 3X 6 2X VGA 9 4X 15 9X BEST SHOT Multi SR Zoom Undeteriorated Maximum MUSEI Zoom Limit Zoom Factor 12M 2 0X 4 0X 3 2 5M 3 1X 6 2X VGA 12 5X 15 9X ART SHOT BEST SHOT excluding Multi SR Zoom A Undeteriorated Maximum Imet Siks Zoom Limit Zoom Factor 12M 1 0X 4 0X 3 2 5M 1 6X 6 2X VGA 6 2X 15 9X 45 Recording Images Shooting a Self portrait You can configure the camera so the monitor screen and lens are facing in the same direction This means you can shoot with the self timer as you compose the self portrait on the monitor screen When using the self timer to shoot a self portrait select one of the following recording modes Auto Premium Auto Pro Make up 1 Rotate the monitor screen panel so the screen is facing in the same direc
127. ubject you want to insert and then touch OK 3 Touch zoom in and zoom out to adjust the size of the subject You also can drag the subject around the screen to reposition it 4 After the subject s size and position are the way you want touch OK This inserts the subject into the background image l NOTE Performing a delete or format operation will not delete the built in subjects 80 Other Playback Functions PLAY i Protecting a File Against Deletion Protect Procedure Enter the PLAY Mode MENU Protect You can protect images to prevent them from being deleted A protected image will be indicated by EX All Files On Protects all files All Files Off Unprotects all files Protects and unprotects specific files D Touch A or V or drag upwards or downwards to display the image you want to protect Touch an image to be protected and EX will appears on the image You can repeat steps 1 and 2 as many times as necessary to select multiple images Touch Ok To unprotect an image touch it in step 2 of the above procedure to remove EM Select ae IMPORTANT Note that even if a file is protected it will be deleted if you perform the format operation page 111 81 Other Playback Functions PLAY i Rotating an Image Rotation Procedure Enter the PLAY Mode MENU Rot
128. upply devices are subject to fixed standards Use of an inferior device or a device that is not up to standard can cause malfunction and or failure of your camera Operation is not guaranteed in the case of a computer built or modified by you Even in the case of a commercially available computer certain USB port specifications may make it impossible to charge via the USB cable A battery that is still warm immediately after normal use may not charge fully Give the battery time to cool before charging it A battery discharges slightly even when it is not loaded in the camera Because of this it is recommended that you charge the battery immediately before you need to use it Charging the camera s battery may cause interference with TV and radio reception If this happens plug the USB AC adaptor into an outlet that is further away from the TV or radio Actual charging time depends on current battery capacity and charging conditions Do not use the USB AC adaptor with any other device Never use the power cord with another device Use only the USB AC adaptor and USB cable specified in this manual for charging Use of any other type of devices may result in improper charging 24 Quick Start Basics Checking the Current Battery Level As battery power is consumed a battery indicator on the monitor screen indicates its current level as shown below Level High lt gt Low Battery Indicator can gt m Bm gt m In
129. urely Check all connections 2 If the camera is not turned on turn it on 3 Your computer may not be able to recognize the camera if you connect via a USB hub Always connect directly to the computer s USB port Language selection Screen appears when the camera is turned on 1 You did not configure initial settings after purchasing the camera or the camera may have been left with a dead battery Check the camera setup pages 25 108 2 There may be a problem with the camera s memory data If this is the case perform the reset operation to initialize the camera s setup page 111 After that configure each setting If the language selection screen does not re appear when you turn the camera on it means that the camera s memory management data has been restored If the same message appears after you turn power back on contact your retailer or a CASIO authorized service center There are various indicators and values on the monitor screen The monitor screen shows indicators and other information about shooting conditions and the image you are recording You can touch the tab and then touch the DISP to select what information you want to include on the display page 9 Appendix 132 Problem Possible Cause and Recommended Action The time and date settings configured the first time after purchasing the camera are reset to their factory defaults when I remove the camera s battery Lo
130. x E Setup Menu Auto On 3M Auto Startup On Half Shutter On Shutter On Operation On Operation Vol 3 Playback Vol 7 Posing Vol 7 Off Off 128 Appendix When things don t go right i Troubleshooting Problem Possible Cause and Recommended Action Power Supply Power does not turn on 1 The battery of new camera is not charged Charge the battery before using the camera 2 The camera battery may be dead Charge the battery page 19 If the battery goes dead soon after being charged it means the battery has reached the end of its life and needs to be replaced Purchase a separately available CASIO NP 150 rechargeable lithium ion battery The camera suddenly powers down 1 The camera is designed to turn off automatically after no operation is performed for about five minutes Turn power back on 2 The battery may be dead Charge the battery page 19 3 The camera s protection function may have activated because camera temperature is too high Turn off the camera and wait until it cools down before trying to use it again Power will not turn off Nothing happens when a button is pressed Remove the battery from the camera and then reload them Charging The back lamp does not light red and the 1 Unplug the USB cable from the camera and then plug it back in again battery won
131. y re format the card Be sure to use the camera to format a memory card Formatting a card on a computer will result in a non SD standard format which can greatly slow down processing time and cause compatibility performance and other problems 1 Load a memory card page 28 2 Turn on the camera and then touch MENU If MENU is not displayed on the screen touch the tab to display it page 38 3 Drag upwards and downwards until you find Setup and then touch it 4 Touch Format 5 Touch Format and then touch Yes This starts the memory card format operation 29 Quick Start Basics Turning Power On and Off E To turn on the camera Back lamp Press Power This will turn on the camera which is indicated when the back lamp lights green and enter the REC mode Entering the REC Mode and PLAY Mode In the REC mode touch PLAY If Auto BEST SHOT or ART SHOT LLL 3g To enter the is selected as the recording mode A PLAY mode you can also switch to the PLAY Power mode by touching the tab and then touching amp PLAY Screen after tab is touched In the PLAY mode touch the tab On the screen image that appears touch 6 REC To enter the REC mode B To turn off the camera Press W Power ab P PLAY I0 REC l NOTE To conserve battery power an Auto Power Off function will turn off power
132. y Card Though the camera has built in memory that can be used to store images and movies you probably will want to purchase a commercially available memory card for greater capacity The camera does not come with a memory card Images recorded while a memory card is loaded are saved to the memory card When no memory card is loaded images are saved to built in memory For information about memory card capacities see page 134 i Supported Memory Cards microSD Memory Card microSDHC Memory Card micro microSDXC Memory Card DP The above are supported memory card types as of January XC I 2014 This camera supports use of microSD memory cards of the following types and capacities microSD memory cards up to 2GB microSDHC memory cards from 2GB up to 32GB microSDXC memory cards from 32GB up to 2TB Note that the ability to use any particular card with this camera even if it satisfies the above capacity and type requirements is not guaranteed AN Warning Memory cards are small and present a risk of accidentally being swallowed o by infants and young children Keep memory cards out of the reach of infants and young children If a memory card is ever swallowed accidentally contact a physician immediately 27 Quick Start Basics i To load a memory card CARD HDMI cover 1 Press 5 Power to turn off the camera and then open the frame page 14 2 Hook your nail into the groove of the C
133. your fingers and the strap do not cover LED light any of the areas indicated in the illustration To protect against accidentally dropping the camera o attach the wrist strap and make sure it is around your fingers or wrist while you are operating the camera Never swing the camera around by its strap The supplied strap is intended for use with this camera only Never use it for any other purpose Microphone Lens 3 IMPORTANT Take care to ensure that your finger is not blocking or is not too close to the LED light Fingers can cause unwanted shadows when shooting Using the Touch Panel The monitor screen of the camera is a touch panel This means you can perform the following operations by touching the screen with your fingers Touch Momentarily touching the screen with your finger Touch the screen to select an icon or menu item and to configure settings Touch and hold Holding your finger against the screen Touch and hold the screen to scroll images at high speed or to perform continual frame by frame playback of a movie 17 Quick Start Basics Drag Holding your finger against the screen as you drag it up down left or right Use drag to move a screen image to a different location and to scroll between images Spread Holding your thumb and forefinger against the screen as you spread them out Use spread to enlarge the screen image Squeeze Holding your thumb and fore

Casio EX-TR350S Owner's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents