Casio Watch 5191 User's Manual
Contents
1. MA1006 EA Operation Guide 5152 5191 cas o e Be sure to keep all user documentation handy for future reference e Your watch may differ somewhat from the one shown in the illustration 5152 5191 Stopwatch second hand 24 hour hand Hour hand Minute hand Stopwatch second hand 24 hour hand Hour hand Minute hand First click Fi i 2 irst click Day setting 1 Day setting gt Second click Second click Time setting Time setting Stopwatch Stopwatch minute minute hand Crown hand Crown Normal position Normal position Second hand Second hand To set the time 1 Pull out the crown to the second click e This causes the second hand to stop 2 Set the hands by rotating the crown Move the minute hand four or five minutes past the time you want to set and then back it up to the proper setting 3 Push the crown back in to the normal position to restart timekeeping To set the day 1 Pull out the crown to the first click 2 Set the day by rotating the crown 3 Push the crown back in to the normal position Avoid setting the day between 9 00 p m and 1 00 a m the day display may not change in the following day Using the Stopwatch The stopwatch lets you measure elapsed time up to 59 minutes 59 seconds To measure times with the stopwatch Elapsed Time Start Stop Re start Stop Clear To adjust the positions of the stopwatch minute hand and stopwatch second hand e This procedure should be per2. W Approximately 2 years on type SR626SW assuming one stopwatch operation 60 min day
3. formed when the stopwatch minute hand and stopwatch second hand do not return to the zero positions 1 Press to reset the stopwatch 2 Pull out the crown to the second click 3 Press to move the stopwatch second hand forward until it points to the zero position e The stopwatch minute hand is syncronized with the stopwatch second hand 4 Push the crown back in to its normal position e Note that pulling the crown out also stops the timekeeping second hand After performing the above procedure you should also adjust the timekeeping setting For watch with the elapsed time bezel Rotate the elapsed time bezel to align the 7_ mark with the minute hand After certain amount of time elapsed read the graduation on the elapsed time bezel which the minute hand points to The elapsed time is indicated e Some water resistant models are equipped with a screw lock crown e With such models you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out Do not pull too forcibly on such crowns e Also note that such watches are not water resistant while their crowns are loosened Be sure to screw the crowns back in as far as they will go after making any setting Specifications Accuracy at normal temperature 20 seconds a month Stopwatch function Measuring capacity 59 59 Measuring unit 1 second Measuring mode Elapsed time Battery One silver oxide battery Type SR626S
Download Pdf Manuals
Related Search