Casio Watch 5079 User's Manual
Contents
1. BCN Barcelona Welli MAD Madrid Ellington PAR Paris MIL Milan ROM Rome BER Berlin e Based on data as of June 2008 e The rules governing global times GMT differential and UTC offset and summer time are determined by each individual country In December 2007 Venezuela changed its offset from 4 to 4 5 Note however that this watch displays an offset of 4 the old offset for the CCS Caracas Venezuela city code2. Illumination automatically turns off whenever an alarm sounds e Frequent use of illumination runs down the batteries To illuminate the face of the watch In any mode except when a setting screen is on the display press 8 to turn on illumination for about one second Reference This section contains more detailed and technical information about watch operation It also contains important precautions and notes about the various features and functions of this watch Button Operation Tone MUTE indicator The button operation tone sounds any time you press one of the watch s buttons You can turn the button operation tone on or off as desired e Even if you turn off the button operation tone the alarm and Hourly Time Signal all operate normally To turn the button operation tone on and off In any mode except when a setting screen is on the display hold down to toggle the button operation tone on MUTE indicator not displayed and off MUTE indicator displayed e Since the button is also the mode change button holding it down to turn the button operation tone on or off also causes the watch s current mode to change e The MUTE indicator is displayed in all modes when the button operation tone is turned off Auto Return Features e If you leave the watch in the Alarm Mode or Hand Setting Mode for two or three minutes without performing any operation it automatically changes to the Timekeeping Mode
3. MA0905 EA Operation Guide 4397 5079 About This Manual Module 4397 Module 5079 e The operational procedures for Modules 4397 and 5079 are identical All of the illustrations in this manual show Module 4397 e Depending on the model of your watch display text appears either as dark figures on a light background or light figures on a dark background All sample displays in this manual are shown using dark figures on a light background e Button operations are indicated using the letters shown in the illustration e Each section of this manual provides you with the information you need to perform operations in each mode Further details and technical information can be found in the Reference section General Guide e Press to change from mode to mode e In any mode except when a setting screen is on the display press to illuminate the face of the watch for about one second Timekeeping Mode World Time Mode Mode indicator Timekeeping Use the Timekeeping Mode to set and view a digital display of the current time and date e All of the operations in this section are performed in the Timekeeping Mode which you enter by pressing e In the Timekeeping Mode you can press to change the display format as shown below Day of the Week Day Hour Minutes Seconds PM indicator Digital Time and Date When setting the digital time you can also configure settings for summer time Daylight Savi
4. allowances for different month lengths and leap years Once you set the date there should be no reason to change it except after you have the watch s batteries replaced e The day of the week is automatically displayed in accordance with the date year month and day settings Daylight Saving Time DST Setting Daylight Saving Time summer time advances the digital time setting by one hour from Standard Time Remember that not all countries or even local areas use Daylight Saving Time To toggle the Timekeeping Mode digital time between DST and Standard Time 1 In the Timekeeping Mode hold down until the Home City code setting start to flash which indicates the setting screen 2 Press once to display the DST setting screen 3 Press D to toggle between Daylight Saving Time ON displayed and Standard Time OFF displayed 4 Press to exit the setting screen e The DST indicator appears to indicate that Daylight DST indicator Saving Time is turned on Operation Guide 4397 5079 Analog Timekeeping The analog time of this watch is synchronized with the digital time The analog time setting is adjusted automatically whenever you change the digital time Note e The hands for the analog timepiece move to adjust to a new setting whenever any of the following occurs When you change the digital time setting When you change the Home City code and or DST setting e If the analog time does not match the digital time f
5. dard Time setting affects only the currently displayed city code Other city codes are not affected DST indicator e Note that you cannnot use the World Time Mode to change the DST setting of the Home City code you currently have selected in the Timekeeping Mode See To toggle the Timekeeping Mode digital time between DST and Standard Time for information about turning the Home City code DST setting on and off Stopwatch The stopwatch lets you measure elapsed time The display range of the stopwatch is 59 minutes 59 99 seconds e The stopwatch continues to run restarting from zero after it reaches its limit until you stop it e The stopwatch measurement operation continues even if you exit the Stopwatch Mode e All of the operations in this section are performed in the Stopwatch Mode which you enter by pressing Minutes Seconds 1 100 second To measure times with the stopwatch Elapsed Time Start Stop Re start Stop Clear Alarm Alarm on indicator Alarm time Hour Minutes To set an alarm time Alarm Operation CASIO When the alarm is turned on the alarm tone sounds when the alarm time is reached You can turn on an Hourly Time Signal that causes the watch to beep twice every hour on the hour e All of the operations in this section are performed in the Alarm Mode which you enter by pressing In the Alarm Mode hold down until the hour setting of the alarm time starts t
6. de indicator Alarm Mode Mode indicator Hand Setting Mode Mode indicator When the setting you want to change is flashing use and to change it as described below CASIO Screen To do this Do this Tt Change the Home City code Press aswar and westward es Toggle between Daylight Saving Time ON Press OFF and Standard Time OFF 12H Toggle between 12 hour 12H and 24 hour 24H timekeeping J6 Reset the seconds to 00 40 18 Change the hour or minutes gl ii Change the year Ball Change the month or day Press and e See Daylight Saving Time DST Setting below for details about the DST setting 5 Press to exit the setting screen e Resetting the seconds to 00 while the current count is in the range of 30 to 59 causes the minutes to be increased by 1 In the range of 00 to 29 the seconds are reset to 00 without changing the minutes e With the 12 hour format the P PM indicator appears on the display for times in the range of noon to 11 59 p m and no indicator appears for times in the range of midnight to 11 59 a m e With the 24 hour format times are displayed in the range of 0 00 to 23 59 without any indicator e The 12 hour 24 hour timekeeping format you select in the Timekeeping Mode is applied in all modes e The year can be set in the range of 2000 to 2099 e The watch s built in full automatic calendar makes
7. e If you leave a screen with flashing digits on the display for two or three minutes without performing any operation the watch automatically saves any settings you have made up to that point and exits the setting screen Operation Guide 4397 5079 CASIO Scrolling The and buttons are used in various modes and setting screens to scroll through data on the display In most cases holding down these buttons during a scroll operation scrolls at high speed Initial Screens When you enter the World Time the data you were viewing when you last exited the mode appears first World Time e The seconds count of the World Time is synchronized with the seconds count of the Timekeeping Mode e All World Time Mode times are calculated from the current Home City time in the Timekeeping Mode using UTC time differential values e The UTC differential is a value that indicates the time difference between a reference point in Greenwich England and the time zone where a city is located e The letters UTC is the abbreviation for Coordinated Universal Time which is the world wide scientific standard of timekeeping It is based upon carefully maintained atomic cesium clocks that keep time accurately to within microseconds Leap seconds are added or subtracted as necessary to keep UTC in sync with the Earth s rotation Specifications Accuracy at normal temperature 30 seconds a month Digital Timekeeping Hour minutes second
8. ng Time or DST your Home City code the code for the city where you normally use the watch and the 12 24 hour format e This watch is preset with a number of city codes each of which represents the time zone where that city is located When setting the digital time it is important that you select the correct city code for your Home City If your location is not included in the preset city codes select the preset city code that is in the same time zone as your location e Note that all of the times for the World Time Mode city codes are displayed in accordance with the digital time and date settings you configure in the Timekeeping Mode e After you correctly set your Home City time and date you can set the watch up for timekeeping with a different city code simply by changing the Home City code in the Timekeeping Mode To set the digital time and date 1 In the Timekeeping Mode hold down until the Home City code starts to flash which indicates the setting screen 2 Use and to select the code you want e Make sure you select your Home City code before changing any other setting e For full information on city codes see the City Code Table 3 Press to move the flashing in the sequence shown below to select the other settings Home City Code gt DST gt 12 24 Hour format gt Seconds A Day lt Year lt Minutes Hour Stopwatch Mode Mo
9. o flash which indicates the setting screen e This operation automatically turns on the alarm Press to move the flashing between the hour and minute settings While a setting is flashing use and to change it e When setting the alarm time using the 12 hour format take care to set the time correctly as a m no indicator or p m P indicator Press to exit the setting screen The alarm sounds at the preset time for about 10 seconds regardless of the mode the watch is in e To stop the alarm tone after it starts to sound press any button To test the alarm In the Alarm Mode hold down to sound the alarm To turn the daily alarm and the Hourly Time Signal on and off In the Alarm Mode press to cycle through the settings shown below Dark figures on a light background m Alarm On Signal On Alarm Off Signal Off Alarm On Signal Off Alarm Off Signal On Light figures on a dark background Alarm On Signal On Alarm Off Signal Off Alarm On Signal Off Alarm Off Signal On e The alarm on indicator and the Hourly Time Signal on indicator are shown on the display in all modes while these functions are turned on Illumination Two LEDs light emitting diodes illuminate the face of the watch for easy reading in the dark Illumination Precautions e Illumination may be hard to see when viewed under direct sunlight e
10. or any reason use the procedure described under To adjust the analog time to match the analog setting to the digital setting e Whenever you need to adjust both the digital and the analog time settings manually make sure you adjust the digital setting first e Depending on how much the hands have to move in order to adjust to the digital time it may take some time before they stop moving To adjust the analog time 1 In the Timekeeping Mode press four times to enter the Hand Setting Mode 2 Hold down until the current digital time starts to flash which indicates the analog setting screen 3 Use and to adjust the analog setting as described below When you want to do this Move the hand setting forward 20 seconds Move the hand setting a short way Hold down forward at high speer Release when the hands reach the setting you want While holding down to move the hands at high speed press to lock the high speed hand movement e To stop the hand movement press any button e Hand movement stops automatically if the hour hand makes one full 12 hour revolution or if a daily alarm or Hourly Time Signal starts to sound Perform this button operation Press O Move the hand setting a long way forward at high speed 4 Press to exit the setting screen e The watch will automatically adjust the minute hand slightly to match its internal second count when you e
11. s p m P day day of the week Time format 12 hour and 24 hour Calendar system Full Auto calendar pre programmed from the year 2000 to 2099 Other 2 screen formats Day of the Week Day Hour Minutes Home City code can be assigned one of 48 city codes Daylight Saving Time summer time Standard Time Analog Timekeeping Hour minutes hand moves every 20 seconds World Time 48 cities 29 time zones Other Daylight Saving Time Standard Time Stopwatch Measuring unit 1 100 of a second Measuring capacity 59 59 99 Measuring mode Elapsed time Alarm Daily alarm Hourly Time Signal Illumination 2 LEDs light emitting diodes Other Button operation tone on off Battery Two silver oxide batteries Type SR726W Approximately 2 years on type SR726W assuming alarm operation 10 seconds per day and one illumination operation 1 5 seconds per day Frequent use of illumination shortens the battery life City Code Table Ci UTC Offset UTC Offset cde Sty GMT Differential City GMT Differential PPG Pago Pago M Stockholm HNL Honolulu 10 Athens ANC Anchorage 9 Cairo 2 YVR _ Vancouver 8 Jerusalem LAX Los Angeles Moscow YEA Edmonton 7 Jeddah DEN Denver Tehran MEX Mexico City Dubai YWG Winnipeg Kabul CHI Chicago Karachi MIA Miami Delhi YTO Toronto Dhaka NYC New York Yangon CCS Caracas Bangkok YHZ Halifax Hong Kong YYT St Johns f Seoul RIO Rio De Janeiro Tokyo RAI Praia Adelaide LIS Lisbon LON London Sne
12. xit the setting screen e To return to the Timekeeping Mode press World Time World Time digitally displays the current time in 48 cities 29 time zones around the world e All of the operations in this section are performed in the World Time Mode which you enter by pressing To view the time in another city 1 In the World Time Mode press to display the currently selected city code 2 While the city code is displayed press to scroll eastwardly through the city codes e The city code is displayed for about one second and then it is replaced with the current time for that city code e For full information about city codes see the City Code Table e If the current time shown for a city is wrong it probably means there is a problem with your Timekeeping Mode time and or Home City code settings Go to the Timekeeping Mode and make the necessary adjustments Current time for the selected city code City code To toggle a city code time between Standard Time and Daylight Saving Time 1 In the World Time Mode use to display the city code whose Standard Time Daylight Saving Time setting you want to change 2 Hold down A for about one second to toggle between Daylight Saving Time DST indicator displayed and Standard Time DST indicator not displayed e The DST indicator is on the display whenever you display a city code for which Daylight Saving Time is turned on e Note that the DST Stan
Download Pdf Manuals
Related Search