Blaupunkt Toronto RDM 128 User's Manual
Contents
1. CD operation Title selection Up GE KE Down Press once to go back to the be ginning of the current title Fast advance audible CUE Hold down as long as required Fast reverse audible REVIEW Hold down as long as required Changer operation optional CD selection gt gt Up se Down Title selection Upwards Press briefly CUE fast advance audible Keep depressed vw Downwards Press as many times as reguired To restart a title Press briefly REVIEW fast reverse audible Keep depressed Extra rocker switch functions Further setting functions with AUD GEO DSC MODE PTY Condition The corresponding function has to be activated 7 Display a NDR2 b VIVALDI c 1 52 Station name CD name or CD time playback time and number for changer op eration optional Waveband Preset button 1 6 Memory bank I Il or Travelstore A CD is inserted Stereo Seek tuning sensitivity Alternative frequency for RDS operation Priority for traffic stations A traffic station is being re ceived m PTY Programme type function n MIX CD playback in random or der o TPM To select and store CD ti tles p T5 Track no 5 is played back KeyCard theft protection system To operate the set it is necessary that the KeyCard is inserted BLAUPUNKT Cer For this purpose introduce the KeyCard with the contact area show ing up into the sl2. el the Loudness function will create a more natural sound by emphasising the low frequency range To switch the Loudness on off Press the AUD button for approximate ly two seconds until you hear a beep The Loudness function is active if LD appears in the display For more information see chapter DSC programming Important notes Precautions Before starting to use your new car radio please read the following information care fully Traffic safety As the driver of a motor vehicle it is your responsibility to pay attention to the traffic situation at all times Never use your car radio in a way that could distract you Please keep in mind that you travel a dis tance of 14 m per second at a speed of only 50 km h Should the traffic situation become particu larly demanding we advise you not to use the radio Always make sure that you are still able to hear any warning signals coming from out side of the vehicle such as police or fire engine sirens so that you can react accord ingly Therefore you should always select a mod erate volume for playing your car radio while you are driving Installation If you would like to install your new car ster eo yourself or add other audio components to existing ones then please read carefully the enclosed instructions on installation and connection In order to ensure that the set operates prop erly it is necessary that the positive power supply lin
3. To toggle between MW and LW e Press MeL Station tuning Automatic tuning A V e Press A V the car radio will automati cally search for the next station When keeping the upper or lower part A V of the rocker switch depressed seek tuning will soeed up in upwards or downwards di rection Seek tuning Up Down se Down in short intervals AF must be switched off x Up in short intervals AF must be switched off Manual tuning with lt lt gt gt You can also tune in a station manually Condition AF and PTY must be switched off i e the symbols do not light up in the display If necessary deactivate these functions e Press AF or PTY Manual tuning e Press lt lt gt gt the frequency will change in short intervals in downwards or up wards direction When holding the right or left part of the rock er switch depressed the frequency scan is speeded up Scrolling through the broadcast ing networks only FM You can use the lt lt gt gt buttons to tune in Stations of your reception area If several programmes of the broadcasting networks can be received you can scroll through them in forwards direction pressing gt gt or backwards using the lt lt button e g NDR 1 2 3 4 N JOY EEN ANTENNE For this it is necessary that the stations have been tuned in at least once and that AF is active lights up in the display For this purpose you m
4. station TA priority AF REG ON OFF SCANTIME seek tuning sensitivity and VOL FIX will also remained stored This ensures that you will find your basic settings re adjusted automatically as soon as you have inserted your KeyCard Putting the unit into operation e Turn on the set Introduce the KeyCard into the slot with the contact area showing up KeyCard tongue sticking out The car radio is now ready for operation Ifa wrong KeyCard is inserted then CARD 38 ERR will appear in the display In this case please do not make any further adjustments The system will switch off after approximate ly ten seconds When inserting another card type e g phone or credit card the display will show WRONG KC for approximately two sec onds Remove the wrong card and introduce the correct KeyCard After the display indications CARD ERR or WRONG KC e Press ON to turn on the set Removing the KeyCard Never pull out the KeyCard directly e First slightly push in the KeyCard This releases the card and puts it in the prop er position for being removed e Now you can pull it out Training a second KeyCard Replacing a KeyCard While operating the unit with the first KeyCard you can train a second one to be also used with the set e Insert the first KeyCard and turn on the set e Press the DSC button and select LEARN KC with A V e Press lt lt or gt gt The displa
5. CD titles will be played at random The individual discs are selected in nu meric order MIX MAG The CD titles will be played at random The individual discs are also selected in random order MIX OFF The Mix function is deactivated Press SC MIX as many times until the desired function briefly appears in the display CD Scan Press SC MIX for approximately two seconds until you hear a beep CDC SCAN will appear in the dis play All CD titles will be scanned brief ly To stop CD Scan Press SC MIX once again lo CLR Radio operation To switch the seek tuning sensitivity level Press button briefly To switch between mono and stereo reception Press button for approximately two seconds beep The stereo symbol will disappear for mono playback CD and CDC operation optional To clear CD titles from the TPM mem ory 1 TPM Track Program Memory To select and store titles during CD CDC playback In each operating mode it is possible to manage a maxi mum of 30 discs Please refer to chap ter TPM programming 2 TA priority for traffic announcements When TA lights up in the display the system will play traffic stations only Priority on off Press TA 13 AF Radio operation Alternative frequency during RDS op eration When AF lights up in the display the system will automatically seek a fre quency offering better reception of the same RDS programm
6. approxi mately eight seconds until CLR CD appears in the display Now this disc has been cleared from the TPM c Clearing a magazine from the TPM e Switch on TPM e Press the CLR button for approxi mately 16 seconds until CLR MAG appears in the display Now this magazine has been cleared from the TPM d Clearing all magazines from the TPM e Switch on TPM e Press the CLR button for approxi mately 24 seconds until CLR TPM appears in the display Now all magazines have been cleared from the TPM CD and CDC operation Entering CD names In the CD mode you can name up to 30 discs and up to 99 for CDC operation The specified name e g VIVALDI will ap pear in the display if you play the disc in the same operating mode CD CDC that was active when entering the name Be sure to select the display mode NAME using the AF button To start the entry e Press the DSC button CD NAME or CDC NAME will be displayed Press fl The first underscore character will flash e Select the first character with the help of the rocker switch Ar You have the choice between the capital letters A to Z special characters and the numbers 0 to 9 e Use the rocker switch lt lt gt gt to move to the next underscore and select a character You can select up to eight characters for CD and up to seven characters for CDC opera tion Once you have completed the name as de s
7. 5 or CDC F05 is connected AUX ON must be adjusted in the DSC menu The CD mode is only available if a disc is inserted To switch to another mode e press SRC briefly I CL Z D 39 Radio operation with RDS Radio Data System The Radio Data System offers you more convenience when listening to FM radio sta tions More and more radio stations have begun to broadcast RDS information alongside their programmes As soon as a programme has been identi fied the station name including a regional identifier if applicable will appear in the dis play for example NDR1 NDS regional pro gramme in Lower Saxony Germany When RDS is activated the preset buttons become programme buttons You now know exactly which programme you have tuned into making it easy to find the desired sta tion quickly But RDS offers you further advantages AF Alternative frequency The AF Alternative Frequency function makes sure that the strongest frequency of the currently selected programme is always tuned in automatically This function is activated when AF appears in the display In order to switch this function on or off e press the AF button briefly While searching for the strongest reception signal the radio may switch to mute briefly 40 If SEARCH appears in the display when switching on the radio or recalling one of the stored frequencies the unit is automatically searching for an altern
8. Radio CD Toronto RDM 128 Operating instructions BLAUPUNKT Bosch Gruppe Al la TR Cr AF TA PTT RATE ul rs a ENGLISH Contents Quick reference 222222u22222 31 Important notes cccceesseeeeeeeeees 37 FP NOC AUNOING een 37 Traffic SAI E 37 Installation E 37 Telephone mute ccccccseeeeeeeeeeeees 37 PCOCSSONIES un rn nennen 37 KeyCard theft protection SY SLEM E 38 Putting the unit into operation 38 Removing the Key and 38 Training a second KeyCard Replacing a key ad 38 Displaying the radio pass data 38 Short Additional Memory S A M 39 Turn On Message T O M 39 Optical indication for extra security 39 Care of your KeyCard sceeceeeeeees 39 Switching the audio source 39 Radio operation with RDS 40 AF Alternative frequency eaaneeaan 40 REG regional programme a oonnnoannnn 40 Selecting a waveband eens 40 Slalom TUNING E 40 Automatic tuning AN 40 Manual tuning with lt lt gt gt 41 Scrolling through the broadcasting net works only FM aussen 41 Changing the memory bank FM 41 30 Storing stations ooooorooovnnn nn 41 Automatically storing the strongest sta tions with Travelstore ees 42 Recalling stored stations 42 Scanning stored stations with Preset Sc
9. an NEE 42 Scanning stations with Radio Scan 42 Changing the scan me 42 Selecting the seek tuning sensitivity 42 Switching from stereo to mono FM 43 PTY Programme Type ainnnennnnennan 43 Switching PTY on off 43 Programme type orion none 43 Checking the programme type of the station uses 43 Displaying the selected programme Eege 43 Selecting a programme type 43 Storing programme types 000 n 44 Scanning stations with PTY SCAN 44 PITY OLY een 44 Receiving traffic programme stations with RDS EON 45 Traffic announcement priority on off 45 Warning beep nennen 45 Switching the warning beep off 46 Automatic seek tuning start 46 Adjusting the volume for traffic announcements and the warning beep 46 Adjusting GEO for traffic messages and the warning Deen 46 CD and CDC changer operation optional ana 47 Switching to CD operation 47 Inserting a Cl 47 Removing a CD 47 Selecting a title 00 eeeeeeeeeeeeeeees 47 MIX playback cccccccseeeeeeeeeeeeeeeeeneees 48 Switching to CDC operation a000 48 Selecting CDs and titles 48 MIX ee 48 Selecting the display mode n00000n 49 Storing the display mode aannnaaaannn 49 SCAN operation cccccccssseeeeeeeeeeeaes 49 TPM Track Program Memory 49 Stor
10. aring TPM information and CD names with DSC UPDATE This menu item is not avail able if you have connected a CD changer A 05 or F 05 The setting made at the fac tory is AUX OFF If you have connected an external piece of equipment via AUX this function must be set to AUX ON Use this function to select the volume at which the ra dio is set when it is switched on Adjust the desired vol ume level with lt lt gt gt When adjusted to VOL 0 the system will come on with the volume selected before switching the radio off To quit the DSC programming mode and store the adjustment e Press DSC Overview of the DSC factory settings CD NAME LOUDNESS TA VOL SPEECH BEEP ANGLE BRIGHT COLOUR LED LEARN KC READ KC PTY LANG SCANTIME S DX S LO CD UPD AUX VOL FIX 3 35 0 4 0 16 green ON ENGLISH 10 sec 4 4 OFF 0 Appendix Specifications Amplifier Output power 4x23 W RMS power acc to DIN 45324 at 14 4 V 4 x 35 W max power Tuner Wavebands FM 87 5 108 MHz MW 531 1602 kHz LW 153 279 kHz FM sensitivity 0 9 uV at 26 dB signal to noise ratio FM frequency response 30 16 000 Hz CD player Frequency response 20 20 000 Hz Compatible with DAB box Digital Audio Broadcasting Subject to modifications Blaupunkt telephone hoiline Address of the next service centre in your vicinity only for Germany If you would li
11. ative frequency SEARCH will disappear from the display when the alternative frequency has been found or after the frequency band has been run through completely If the reception quality of the selected pro gramme becomes too bad e Tune into another station REG regional programme Certain radio programmes are split up at times into regional programmes offering lo cal information The 1st programme broad cast by NDR for example offers pro grammes with different contents in the northern states of Germany Schleswig Holstein Hamburg and Lower Saxony at certain times of the day If you are listening to one programme and move to an area where another linked re gional programme becomes stronger the unit will switch to that programme If you wish to continue listening to the first programme e press the AF button for approximately two seconds REG ON appears in the display If you leave the service area of the regional programme tuned into or if you would like to take advantage of the full RDS service switch to REG OFF e Press the AF button for approximately two seconds until REG OFF appears REG ON or REG OFF will be briefly dis played each time the radio is switched on Selecting a waveband With this car radio you can select between the following wavebands FM 87 5 108 MHz MW 531 1602 kHz LW 153 279 kHz e Select the desired waveband by press ing the FMT or MeL buiton
12. ay start Travelstore seek operation e Press FMT for two seconds the sys tem starts to run through the frequency band If AF does not light up e press AF With this the requirements for selecting sta tions with lt lt gt gt are fulfilled Changing the memory bank FM You can shift between the memory banks Il and T in order to store stations and recall them later The currently selected memory bank is in dicated in the display e Press the FMT button as many times until the desired memory bank lights up in the display Storing stations On FM you can store six stations on the preset buttons 1 6 for each of the memory banks I Il and T On MW LW you can store six stations each e Select the appropriate waveband with FMT or MeL e Tune in a station with the rocker switch either automatically A V or manually lt lt gt gt e Press the desired preset button until the radio resumes play after the mut ing takes approximately two seconds confirmed by beep Now the station has been stored The activated preset button is indicated in the display Notice Should you tune in a station which has al ready been stored before on another mem ory bank the corresponding preset button and the memory bank will briefly flash in the display 41 I CL O Z D Automatically storing the strongest stations with Travelstore You can automatically store the six most powerful FM
13. cker switch as many times until you have reached the desired title The number displayed beside T indicates the track number of the currently played title 47 a CL O Z D MIX playback When the MIX function has been activated the CD tracks will be played in random or der MIX will then appear in the display In order to switch the MIX function on or off e press SC MIX briefly CDC operation optional Switching to CDC operation Make sure that at least one CD has been inserted into the magazine Press SRC to go through the available au dio sources e Press as many times until the display briefly shows CDC 48 Selecting CDs and titles CD selection ax Up se Down Title selection Upwards Press briefly CUE fast advance audible Keep depressed Downwards Press as many times as required To restart a title Press briefly REVIEW fast reverse audible Keep depressed MIX playback You can have the CD tracks played in ran dom order MIX CD The titles of the selected CD will be played at random The next disc will be selected in numeric order MIX MAG CDC A 05 CDC F 05 All titles of the CD will be played at random The next disc will then also be selected and played ran domly etc MIX OFF The Mix function is deactivat ed Discs and titles will be selected in numeric order To alter the setting e Press SC MIX as many times un
14. correspond ing station for the duration of the pro gramme Example German broadcasting network NDR Station tuned in NDR3 PTY lights up in the display Programme type POP selected Seek tuning is started No station with PTY POP can be found The display shows NO PTY and automatically switches back to NDR3 NDR2 airs a PTY POP programme The system will switch to the linked station NDR2 for the duration of the POP programme During CD or CDC operation the set will also switch to the programme offering the selected PTY within the broadcasting net work After the PTY programme the system will remain in the radio mode Notice As earlier mentioned these functions are currently only supported by a limited number of RDS stations Receiving traffic programme stations with RDS EON The abbreviation EON stands for En hanced Other Networks meaning the exchange of information within a radio net work Many FM broadcasters offer traffic messag es for their service area at regular intervals All traffic programme stations transmit a special carrier signal alongside their pro grammes which is decoded by your car ra dio If this signal is identified TP will ap pear in the display Traffic Programme In addition to these there are also stations which do not actually transmit traffic pro grammes themselves but by using RDS EON they offer the possibilit
15. e AF on off Press AF briefly Regional function on off Press the AF button for approximately two seconds until you hear a beep REG ON or REG OFF will appear in the display see chapter REG re gional programme CD operation To switch between the name and time playback time display modes Press AF briefly CDC operation optional To switch between the name time playback time and number CD number display modes Press AF briefly PTY Programme Type In the PTY mode the preset buttons become programme type buttons With each preset you can select one programme type such as for example NEWS SPORT POP MUSIC EDUCATE etc 15 A e SRC SRC source When having a CD inserted you can switch between the different audio sources radio CD and CDC AUX if activated amp Eject Hold down the button for approximate ly two seconds beep and the CD will eject 1 2 3 4 5 6 preset buttons On FM you can store six stations for each of the memory banks II and T On MW LW you can store six stations each To store a station Press a preset button during radio operation and hold down until the set resumes play after the muting and you hear a beep To recall a station Select the desired waveband On FM adjust the corre sponding memory bank and press the relevant preset button briefly Extra function preset buttons To store and recall a PTY programme type On FM yo
16. e after the oth er in ascending order To stop the Scan function e Press SC MIX once again briefly The track currently being scanned is con tinued to be played SCAN will also be terminated by e pressing one of the buttons AUD GEO DSC SRC TPM GI lt lt gt gt Or ANN TPM Track Program Memory Use this feature to programme and play your favourite CD titles Up to 30 CDs can be managed in the CD mode up to 99 discs in the CDC mode Storing tracks with TPM Make sure that the TPM function is switched off TPM not shown on the display panel If you have not yet stored a track in the TPM the function will be unavailable If required e switch TPM on off by pressing the TPM button e Use A to select a track The track number will be displayed e Hold down the TPM button until you hear a beep Now the track has been stored With CDC operation a lt symbol will ap pear in front of the CD name Then select the next track with A w and store with TPM as detailed above You can also store a track at any time dur ing CD playback For this it is necessary that TPM and SCAN are deactivated Programme TPM information for other CDs in the same way 49 I CL O Z D CD playback with TPM e The TPM function must be switched on TPM on off with the TPM button The tracks stored with TPM will be played in ascending order Any tracks which were not stor
17. e hour 2 VOL VOL To alter the volume Each time the set is switched on it will play with the pre adjusted volume VOL FIX You may also change the VOL FIX set ting see chapter DSC programming OA For instantly muting the volume By pressing the Gl button the volume will be muted immediately MUTE will appear in the display The function is cancelled by pressing button Z or VOL When pressing VOL the normal vol ume will be by one grade lower than the mute volume To programme the mute volume level proceed as follows e Adjust the desired volume e Press Mfor two seconds until you hear a beep Now this volume level is stored as your mute volume Extra function Z Memory button in the DSC menu 4 FMT Press repeatedly to switch between the FM memory banks I Il and T Travelstore When pressing this button the system will automatically switch to FM Extra function FMT To store the six most powerful stations automatically with Travelstore Press FMT until you hear a beep or T STORE appears in the display 5 MeL toggle switch To toggle between medium and long wave reception 31 6 Rocker switch 32 Radio operation A F ih W lt lt gt gt lt lt gt gt Station search Up Down Up Down in short intervals when AF is off To scroll through the station net works when AF is on e g NDR 1 2 3 4 N UOY FFN ANTENNE
18. e is connected via the ignition and the permanent 12 V lead Do not ground the loudspeaker outputs Telephone mute If you have a mobile telephone installed in your vehicle radio or CD playback can be muted automatically when using the phone telephone mute PHONE will then appear in the display When TA is active traffic messages will al ways have priority The announcement will be aborted by pressing the TA button Accessories Use only the accessories and spare parts approved by Blaupunkt You can use the following Blaupunkt prod ucts with this car stereo I CL O Z D Changer CDC A 05 or CDC F 05 Remote control With the infrared remote control RC 05 you can control all of the important functions of your car hi fi system from the steering wheel Amplifier All Blaupunkt amplifiers 37 KeyCard theft protection system This car radio is supplied with one KeyCard as standard though it can also be operated with a second card If you have lost your KeyCard or if it was damaged you can buy a new one from your specialised dealer When using two KeyCards the settings stored on the first card will be adopted How ever you can individually store the follow ing functions Preset button assignments bass treble balance and fader settings Loudness TA traffic announcement volume beep vol ume In addition the settings activated before switching the radio off such as the wave band
19. ed will be skipped over Clearing TPM information Using the CLR clear button you can clear single tracks all of the tracks for one CD or the entire Track Programme Memory For CDC operation you can also clear the TPM information of either the inserted mag azine or all magazines In order to clear any of this information TPM must be switched on TPM lights up in the display If the TPM contains no data then NO TPM will appear in the display CD operation a Clearing a track from the TPM e Switch on TPM e Select the track with Al e Press the CLR button for approxi mately two seconds until CLR TR appears in the display Now this track has been cleared from the TPM 50 b Clearing a CD from the TPM e Switch on TPM e Press the CLR button for approxi mately four seconds until CLR DISC appears in the display Now this disc has been cleared from the TPM c Clearing all CDs from the TPM e Switch on TPM e Press the CLR button for approxi mately eight seconds until CLR TPM appears in the display Now all of the discs have been cleared from the TPM CDC operation a Clearing a track from the TPM e Switch on TPM e Select the track with aw e Press the CLR button for approxi mately two seconds until CLR TR appears in the display Now this track has been cleared from the TPM b Clearing a CD from the TPM e Switch on TPM e Press the CLR button for
20. er than the TA VOL level then the traffic report will be played slightly louder than the standard volume SPEECH BEEP In future many RDS radio stations will differentiate be tween music and speech programmes You can alter the tone for speech programmes from between SPEECH 0 4 SPEECH 0 Music speech off SPEECH 1 Linear reproduction bass treble and Loudness set to 0 SPEECH 2 4 Different settings for vol ume bass and treble with the Loudness being switched off Try out which SPEECH set ting you like most Acknowledgement tone for all functions which require a button to be pressed for more than one second The volume can be adjusted from between 0 to 9 0 off ANGLE BRIGHT COLOUR Variocolour Use this setting to alter the viewing angle to your liking from 1 to 0 to 1 You can adjust the display LEARN KC brightness from between 1 to 16 You can also select different values for day and night Selecting the night bright ness Switch on the vehicle lights and programme the bright ness value The car radio s lighting connector must be hooked up to the vehicle s electric system for this to function properly READ KC For gradually matching the radio illumination with the dashboard lighting Here you can choose be tween LED ON or LED OFF With LED ON the KeyCard tongue will flash for extra anti theft protection when the unit has been switched off and
21. ess a preset button which has a traffic programme station allocated to it Alternatively b Switch off the priority for traffic an nouncements e Press TA TA will disappear from the dis play Automatic seek tuning start CD and CDC operation When leaving the reception area of the tuned in traffic programme station while listening to a CD the system will automatically start searching for a new TA programme If no such station is found within approxi mately 30 seconds CD operation will be stopped and a warning beep will sound To switch the warning beep off proceed as described above 46 Adjusting the volume for traffic announcements and the warning beep This volume was preset at the factory though you can alter the value using the DSC function see DSC programming TA VOL Adjusting GEO for traffic mes sages and the warning beep You can separately adjust the balance and fader settings for both traffic announcements and the warning beep For example it is possible to listen to traffic reports via the front left right soeaker only This provides the driver with the important traffic information without bothering the rear passengers too much To make a setting e During an announcement adjust the balance and fader settings to suit your personal preferences CD and CDC changer operation optional This car stereo is equipped with a CD drive In addition it offers you convenient contr
22. ing tracks with TPM 49 CD playback with TPM 50 Clearing TPM information 50 Entering CD names sonnnnnennnensennnna 51 Deleting a CDname 51 Clearing TPM information and CD names with DSC UPDATE 51 DSC programming 52 Overview of the DSC factory le 54 Appendix uusununanennnnnennnnnonnannennnn 55 Specifications ee ccecceeeeeeceeeeeeeeeeeeaeees 55 Guick reference 1 Switching on off with the ON button Press ON When switching the set on with the ON button the KeyCard has to be insert ed The unit will play with the pre ad justed volume Switching on off with the KeyCard The set has to be turned on via the ON button Note Read the information in chapter KeyCard theft protection system Switching on off via the ignition When connected correspondingly the set can also be turned on and off via the vehicle ignition After the ignition has been switched off a double beep tone will remind you that you should remove the KeyCard before leaving your vehicle Switching on with the ignition being switched off To keep on operating the set when the ignition is switched off KeyCard is in serted proceed as follows Press ON after the double beep tone The unit will be turned on To avoid that the battery goes flat the system will be turned off automatically after a playback time of on
23. ired e Press gin order to store it To quit the naming mode e leave the DSC menu by pressing DSC If you would like to name another CD e insert a new disc in the CD mode or select a new one for CDC operation You can change any existing name by en tering and storing a new one overwriting Deleting a CD name Use the DSC feature to delete a CD name e Press DSC e Press av as many times until CD NAME or CDC NAME shows on the display panel e Press CLR The name will disappear To quit the DSC menu e Press DSC Clearing TPM information and CD names with DSC UPDATE With the help of the DSC update function you can clear CDs from the TPM and delete their names Use CD UPD or CDC UPD to confirm all of the CDs for which the TPM information is not to be deleted e Insert a CD or magazine with CDs for which the TPM information is to be maintained e Press the DSC button e Press k y to select CD UPD or CDC UPD e Press lt lt gt gt After the update has been completed NEXT CD or NEXT MAG appears in the display e Press amp for approximately two sec onds in the CD mode on the car ster eo for CDC operation on the changer The CD or magazine will eject e Insert the next CD or magazine Proceed as described above for all of the CDs magazines for which the TPM infor mation and the CD name is to be main tained 51 I CL O Z D e Afte
24. ke to know the address of the next Blaupunkt service centre of your area without having our service list at hand Find out your area code Then call the following chargeable phone number 01 80 5 25 56 66 Using the area code to be entered vou will be automatically given the address and phone number of the next Blaupunkt service centre You can also reguest this information by fax 99 ENGLISH 1 98 Blaupunkt Werke GmbH Bosch Gruppe K7 VKD 8 622 401 500 Ce
25. lay a special turn on message each time the radio is switched on The freely selectable text with a maximum of 48 characters can be programmed by all dealers who have the required equipment available The programmed text will be displayed each time you turn on your system with the sec ond KeyCard Optical indication for extra security Flashing KeyCard tongue When the vehicle is stationary and the KeyCard removed the KeyCard tongue can be switched to flash for extra anti theft secu rity For this it is necessary that the positive pow er supply line and the permanent 12 V lead are connected such as described in the in Stallation instructions Be sure that LED ON is adjusted in the DSC mode If required please refer to chapter DSC programming LED Switching off the flashlight The flashlight can be switched off by push ing in the KeyCard and lock If you would like to deactivate the flashing tongue with general effect adjust the rele vant item in the DSC menu to LED OFF Care of your KeyCard For a proper function of the KeyCard it is important that the contacts are free from any foreign particles Avoid direct skin contact If necessary clean the KeyCard contacts using a cotton swab soaked with alcohol Switching the audio source Using the SRC button you can switch be tween the following audio sources radio CD or CDC AUX AUX is only available if no Blaupunkt chang er CDC A0
26. n e Press SC MIX briefly The scanned frequency or the station name will start flashing in the display During the actual scanning process SCAN will be dis played To select a scanned station and switch off the Radio Scan function e Press SC MIX briefly If no station is selected the scan function will be automatically switched off after the frequency band has been run through com pletely The unit will tune in the station lis tened to before starting the scan Changing the scan time The scan time can be changed from be tween five to a maximum of 30 seconds Please refer to chapter DSC programming SCANTIME Selecting the seek tuning sensi tivity You can alter the automatic seek tuning sensitivity If lo is displayed the radio will only pick up strong local stations low sensitivity If lo does not light up the radio will also pick up weaker distant stations high sen sitivity The sensitivity level can be altered in both modes see also chapter DSC program ming Switching from stereo to mono FM If reception is poor you may get better sound quality by switching to mono e Press the lo button for approximately two seconds With mono playback the stereo sign amp will disappear from the display Each time the radio is switched on stereo playback is activated The unit will automatically switch to mono if the received signal is not strong enough for stere
27. o playback PTY Programme Type PTY is an RDS service offered by more and more radio broadcasters This feature allows you to select FM stations according to their programme type After you have chosen the PTY of your preference the corresponding stations can be selected either by seek tun ing or using the scan function Switching PTY on off e Press PTY When the function is active the programme type selected last will briefly appear in the display PTY will be permanently indicat ed in the lower right corner of the display panel Programme type Use lt lt gt gt to have the last selected pro gramme type displayed and to choose a new one You can select any one of the stored types with the preset buttons 1 6 Condition PTY must be active Using DSC you can choose between Ger man and English see DSC programming PTY LANG All of the programme types listed below are available The letters printed in bold are identical to the actual short time indication in the dis play NEWS CURRENT AFFAIRS INFORMATION SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP MUSIC ROCK MUSIC M O R M middle of the road music LIGHT M light classical CLASSICS serious classical OTHER M other music PTY 16 to PTY 30 are not yet assigned Checking the programme type of the station e Press PTY for approximately two sec onds After the beep tone the display will show the programme ty
28. ol of a Blaupunkt CD changer CDC A05 or CDC F05 These changers are not includ ed in the scope of delivery and can be pur chased from your specialised dealer CD operation Switching to CD operation Make sure that a disc is inserted CD IN shows on the display panel Press SRC to go through the available au dio sources e Press as many times until the display briefly shows CD Inserting a CD e Switch on the radio e Insert a CD with the label facing up without the use of force The CD will be transported to its playing position automatically CD playback will Start Removing a CD e Press the 2 button for approximately one second beep The CD will be ejected To protect the CD mechanism do not im pair or try to help the automatic insertion and ejection of the disc in any way Ifthe CD is not removed within approximate ly 30 seconds it will be re inserted automat ically Selecting a title After having inserted the CD the activated CD functions will appear on the display pan el If the TPM indicator is inactive you can select and play all CD titles If TPM lights up you can only select and play the titles programmed with TPM Aw Title selection Up W Down Press once to go back to the begin ning of the current title Kei Fast advance audible CUE Hold down as long as required se Fast reverse audible REVIEW Hold down as long as required Press the ro
29. ot above the tongue sticking out of the unit To remove the card press first to un lock Read also the information in chapter KeyCard theft protection system lt 6 Flashing KeyCard tongue When the radio Is turned off and the KeyCard removed the KeyCard tongue can be programmed to flash for optical theft protection For more information see chapter DSC programming This flashlight can be switched off by pushing in the tongue and lock 9 SC MIX I CL O Z D Radio operation Scan Press SC MIX briefly FM SCAN and the name of the scanneg station will alternately appear in the display The unit will scan all sta tions which can be received Preset Scan Press SC MIX for approximately two seconds until you hear a beep SCAN and the name of the scanned station will alternately appear in the display The unit will scan all stations stored on the preset buttons To stop Scan Preset Scan Press SC MIX once again CD operation MIX playback The Mix function is switched on if MIX appears in the display The CD tracks will be played at random To switch Mix on and off Press SC MIX briefly 33 34 CD Scan Press SC MIX for approximately two seconds until you hear a beep CD SCAN appears in the display The unit will scan all CD titles To stop CD Scan Press SC MIX once again Changer CDC operation optional MIX CD The
30. pe offered by the tuned in sta tion If NO PTY appears in the display the cur rent station has no PTY code I CL O Z D Displaying the selected programme type e Press lt lt or gt gt The programme type selected last will be displayed briefly Selecting a programme type a Using the preset buttons When PTY is switched on you can use the preset buttons 1 6 to select the programme types stored at the factory e Press one of the presets 1 6 The selected programme type will be displayed for two seconds If you wish to listen to a station with this PTY e press A V to start seek tuning op eration 43 If the system is unable to find a station of fering the selected programme type the dis play will show NO PTY and a beep tone will be released The station received be fore starting seek tuning will be tuned in You can assign different programme types to each preset position Please refer to the next chapter Storing programme types b Using the lt lt gt gt buttons of the rocker switch When PTY is switched on you can se lect a programme type using buttons lt lt gt gt e Press lt lt or gt gt the programme type selected last will be displayed for three seconds e During this period press gt gt for wards or lt lt backwards to select the desired type e Press lt lt or gt gt as many times as required If you wish to listen to a sta
31. r having updated the last CD or magazine press TPM for approximate ly two seconds beep To quit the function e press DSC The system has saved the TPM information for all of the CDs which were inserted For all other discs the TPM information and CD names have been deleted o2 DSC programming DSC Direct Software Control allows you to customise certain programmable basic settings to suit your personal needs and preferences and then store them The basic settings for this audio equipment were made at the factory In the following you can find an overview of these settings so that you can always reset to these if desired If you wish to alter any of the programming e press DSC Use the rocker switch and the g button to select and adjust the functions described in the following The display will show you the adjusted condition A V lt lt gt gt Select function Adjust recall value CD CDC NAME LOUDNESS TA VOL Only available for CD CDC playback Use this function to name your CDs See Entering CD names Loudness When listening at a low level the Loudness function creates a more nat ural sound by boosting the low frequency range LOUD 1 Low boost LOUD 6 Max boost To adjust the traffic an nouncement and warning beep volume from between 0 to 63 The message will then come through at this volume if the standard volume Is lower Should the standard volume be high
32. stations of your current recep tion area sorted according to their signal strength This function is particularly con venient on longer trips e Press the FMT button for two seconds T STORE will appear in the display The six strongest FM stations will be auto matically stored on the memory bank T Travelstore When this process has been completed the radio will play the first sta tion If desired stations can also be stored man ually on the Travelstore bank see Storing stations Recalling stored stations You can recall any stored station at the touch of a button e Select the waveband by pressing FMT or MeL On FM also choose the corre sponding memory bank by pressing the FMT button as many times until the desired bank appears in the display e Press the corresponding preset button briefly to recall the station 42 Scanning stored stations with Preset Scan You can have all of the stored stations briefly scanned on all wavebands To start Preset Scan e Press SC MIX for approximately two seconds All of the stored stations of the adjusted waveband will be scanned one after the oth er The memory bank and preset position of the currently scanned station will flash in the display To select a scanned station and switch off Preset Scan e Press SC MIX briefly Scanning stations with Radio Scan You can also scan all stations which can be received To start the Scan functio
33. the KeyCard re moved I CL O Z D To train a second KeyCard Please read the information in chapter KeyCard theft protection system Train ing a second KeyCard To read out the KeyCard data The card supplied with the radio is used to display the model name type number 7 6 and the serial number With the extra card it is pos sible to display the Short Additional Memory S A M data entered by your spe cialised dealer See chapter Short Additional Memory S A M If you remove the KeyCard during the reading process READ KC will show on the display panel The unit con tinues to play but does not 53 PTY LANG SCANTIME S DX S LO 54 accept any operations ex cept from being switched off Re insert the card To select the programme type language DEUTSCH or ENGLISH Use this function to set the scan time for the radio or CD player from between five and 30 seconds ASA To adjust the seek tuning sensitivity for distant recep tion DX 1 high sensitivity DX 3 low sensitivity To adjust the seek tuning sensitivity for local recep tion LO 1 high sensitivity LO 3 low sensitivity The seek tuning sensitivity values can be separately set for AM and FM VOL FIX CD CDC UPD Use this function to clear TPM information and CD names during CD and CDC operation in order to have more storage capacity for new discs available See Cle
34. til the desired function is briefly displayed If the function is active MIX will appear in the right display corner CD and CDC operation Selecting the display mode You can select the desired display mode for CD operation NAME The specified name for example MADONNA will be displayed TIME The elapsed playback time of the title is dis played for example id In addition for CDC operation NUMBER The CD position in the magazine disc number is displayed for example CD 8 To switch the display mode e Press the AF button during CD play back The display mode and the corresponding setting or value will briefly show on the dis play panel e g TIME 2 32 If you have selected NAME without hav ing specified a name for the corresponding disc CD PLAY will appear in the display Please read also the chapter Entering CD names Storing the display mode You can store your preferred display mode which will then be active each time the ra dio is switched on If required e press AF as many times until the de sired setting is displayed e Hold down the AF button until you hear a beep SCAN operation Use this function to scan all of the CD tracks For CDC operation the system will scan the titles of all discs To start the Scan function e Press SC MIX for approximately one second The titles will be scanned on
35. tion offering the selected PTY e press A V to start seek tuning op eration If the system is unable to find a station of fering the selected programme type the dis play will show NO PTY and a beep tone 44 will be released The station received be fore starting seek tuning will be tuned in Storing programme types One programme type was assigned to each of the preset buttons 1 6 at the factory If desired you can also store other availa ble programme types To do so make sure that PTY lights up in the display e If necessary press the PTY button to switch on the function e Select a programme type using but tons lt lt gt gt and e hold down the desired preset button 1 6 until you hear a beep Now the selected programme type can be recalled by pressing this preset For this the PTY function must be active Scanning stations with PTY SCAN Condition PTY must appear in the display e Press the SC button All received stations offering the selected programme types will be scanned To switch off PTY SCAN e Press SC once again PTY priority Situation PTY is switched on and lights up in the dis play No station offering the selected programme type can currently be received with seek tuning or scan The set will switch back to the previous sta tion As soon as a programme with such PTY can be received within the broadcasting network the unit will switch over to the
36. u can store and recall one programme type on from each preset button when PTY is active PTY lights up in the display 17 CD slot When inserting a disc with the label side facing up it will be pulled in auto matically and transported to the play back position CD playback is adjusted automatically DSC Direct Software Control Use the DSC function to customise certain programmable basic settings to suit your personal needs and prefer ences See chapter DSC program ming for more information 35 GEO To adjust the balance left right and fader front rear with the rocker switch AA Fader front WW Fader rear see Balance left pr Balance right The last setting will be stored automat ically To switch off GEO Press button once again If the setting remains unchanged with in four seconds the display will switch back to the previous condition Extra function GEO Separate balance and fader settings for traffic messages See chapter Ad justing GEO for traffic messages and the warning beep AUD To adjust the treble and bass frequen cies with the rocker switch Treble vw Treble ee Bass s Bass The last setting will be stored automat ically To switch off AUD Press button once again If the setting remains unchanged with in four seconds the AUD setting will be terminated automatically Extra function AUD Loudness When listening at a low lev
37. y to receive the traffic messages broadcast by another traf fic programme station in the same radio network If you wish to have the priority for traffic an nouncements activated while listening to one of these stations e g NDR3 TA must appear on the display panel If a traffic announcement is broadcast the radio will automatically switch to the linked traffic programme station in this case NDR2 for the duration of the message and return to the original programme NDR3 afterwards Traffic announcement priority on off If the priority for traffic announcement pro grammes is activated TA will light up in the display To switch the priority on or off e Press the TA button When pressing TA while a message is be ing broadcast this message will be interrup ted The unit will then switch back to the pre vious condition The priority for other traffic messages remains active Please note that several buttons have no function while a traffic announcement is broadcast Warning beep If you leave the reception area of the traffic programme station currently tuned into you will hear a warning beep after approximate ly 30 seconds This alarm tone will also be released when pressing a preset button which has no traf fic programme allocated to it 45 I CL O Z D Switching the warning beep off a Tune into another station offering traf fic information e Press the rocker switch or e pr
38. y will switch to CHANGE e Push in the KeyCard The card is re leased and put in the proper position for being removed e Remove the first KeyCard and insert the new one while CHANGE is still being displayed After the display indication READY or LEARN KC e press DSC Now you can also use the new KeyCard for operating your unit A maximum of two cards can be used for the set When trying to train a third one the ac cess authorisation for the KeyCard not used for the training process will be deleted automatically Displaying the radio pass data Using the KeyCard supplied with your set you can have the radio pass data such as the model name product number 7 6 and serial number indicated on the display panel Please refer to chapter DSC programming READ KC Short Additional Memory S A M The second KeyCard available from your specialised dealer offers you the possibility to read out any short information which will be moved through the display such as for example the phone number of your car deal er or the emergency call number of your automobile association Please refer to chapter DSC programming READ KC The freely selectable text with a maximum of 48 characters can be programmed by all dealers who have the required equipment available Turn On Message T O M The second KeyCard available from your specialised dealer also allows you to dis p
Download Pdf Manuals
Related Search