Blaupunkt ALBERTVILLE DJ User's Manual
Contents
1. gramme types which are available WEATHER FINANCE TRAVEL HOBBIES JAZZ COUNTRY NEWS INFO SPORT 33 CULTURE SCIENCE VARIED POP MUSIC ROCK MUSIC CLASSICS Switching PTY ON OFF Press PTY When the function is active the programme type selected last will briefly appear in the display PTY will appear permanently Checking the programme type of the station e Press PTY for approximately 2 sec onds After the beep tone the display will show the programme type offered by the tuned in sta tion If NONE appears in the display the current station has no PTY code 34 Displaying the selected programme type e Press lt lt or gt gt The programme type selected last will be displayed briefly Selecting a programme type a Using the preset buttons When PTY is switched on you can use the preset buttons 1 6 to select the programme types stored at the factory Press one of the presets 1 6 The selected programme type will be displayed for 2 seconds If you would like to listen to a station with this PTY press A V to start the seek tuning function If the radio is unable to find a station offer ing the selected programme type the dis play will show NO PTY and a beep tone will be emitted The radio will select the sta tion which was tuned into before seek tun ing was activated You can assign different programme types to each preset position Please refer to the next se2. AF is off For FM only Scrolling through the broadcasting networks if AF is on Example NDR 1 2 4 N Joy FFN Changer mode Optional Albertville RCM 149 Zermatt RCM 149 Included Aspen DJ Select CD Up w Down 25 Select title gt gt Up press briefly CUE fast forward audible hold button down lt Down press two or more times briefly Repeat title press briefly REVIEW fast reverse audible hold button down Extra function of rocker switch For additional settings use AUD DSC MODE 21 PTY 12 Requirement The respective function is activated SRC SC SRC audio source SC scan Press button briefly to select the oper ating mode tuner cassette changer The active mode appears in the dis play Press SRC SC longer to select the SCAN function samples radio stations and titles Use DSC programming to set the scan time Radio mode Press SRC SC longer The radio will scan all receivable FM stations SCAN and the station name appear on the display one after anoth er PTY Scan PTY Scan can be started if PTY is on PTY will be displayed The radio will scan all stations broad casting the selected programme type Changer mode Press SRC SC longer SCAN will be displayed To stop CD Scan Press SRC SC again G AF TA Alternative Frequency in RDS mode TA Traffic Announcement priority for traffic programs If
3. AF is displayed the radio will auto matically search for a radio frequency offering the same programme in a bet ter quality using RDS TA on off Press AF TA briefly TA will be dis played priority for traffic programs ac tivated Press AF TA briefly TA off TP will be displayed when a traffic programme is played AF on off Press AF TA longer a beep will be emitted AF appears Press AF TA longer a beep will be emitted AF disappears 42 PTY Programme Type You can select among various pro gramme types Using the rocker switch itis possible to recall all PTY programme types if PTY is activated PTY lights up in the display 13 BA TS Switches between the wavebands memory banks FM1 FM2 FMT Travelstore MW and LW Zermatt RCM 149 without MW LW Extra function Travelstore To store the six most powerful radio stations in the Travelstore bank Press BA TS until a beep sounds and T STORE appears 44 49 Preset buttons 1 to 6 Radio mode You can store six stations in each memory bank 1 2 and T On MW and LW you can store six sta tions each except for Zermatt RCM 149 Store station hold down a preset button in radio mode until a beep is emitted Recall station select a waveband and also the memory bank on FM press the relevant preset button briefly The selected preset button will briefly appear in display field 1 e g P1 Changer
4. eee 23 Quick reference 25 Important notes 28 What you need to know 28 Traffic safety eeesessesssss 28 Installations cte 28 Warning note eeeen 28 Clock einem 29 Setting the clock sesssse 29 Release Dame 29 Theft protection ssesssss 29 Fixing the release panel 30 Selecting the audio mode 30 Radio operation with RDS 31 AF Alternative frequency 31 REG regional programme 31 Selecting a waveband 31 Station tuning eeesssessss 31 Automatic seek tuning A V 31 Manual tuning with lt lt gt gt 32 Scrolling through the broadcasting networks FM only 32 Switching between the memory banks EM inre Eco s 32 Storing stations ssessssss 32 24 Automatically storing the strongest stations with Travelstore 32 Recalling stored stations 33 Scanning stations with Radio Scan 33 Changing the scan time 33 Selecting the automatic tuning sensitivity sinti a 33 PTY Programme Type 33 Programme types eeen 33 Switching PTY ON OFF 34 C
5. SRC SC to select the CD changer Press SRC SC repeatedly until CHANGER appears in the display CD playback starts with the first CD identi fied by the changer Selecting a CD When CD playback starts all active CD func tions and the CD number light up in the dis play To change the display between CD number and elapsed time indication press dur ing CD playback iw CD selection o Up Down The CD number being played appears in the display Selecting a title Up Press briefly CUE fast advance audible Hold button down Down Press two or more times briefly To re start a title Press briefly REVIEW fast reverse audible Hold button down Press the button repeatedly to skip several titles The number of the selected title appears beside T track SCAN Use this function to scan all of the CD tracks To start the Scan function Hold down SRC SC until SCAN ap pears All titles of the CD will be scanned one after the other in ascending order To stop the Scan function e Press SRC SC briefly The track currently scanned will continue to play The SCAN function will also be cancelled by pressing any other button except for the volume controls and the AUD and ON but tons RPT CD titles can be played repeatedly The following options are possible Repeat the current title REPEAT T or Repeat the CD i e all titles of the cur rent disc RE
6. active if TA lights up in the display Press the AF TA button briefly to acti vate TA 37 ENGLISH CD changer operation Optional Albertville RCM 149 Zermatt RCM 149 Included in delivery Aspen DJ This piece of equipment offers you convenient control of a Blaupunkt CD changer CDC A 08 CDC A 072 If the CD changer is connected the 2 sym bol lights up in the display The changer is equipped with a magazine for 10 discs Note Use only perfectly circular CDs with a diam eter of 12 cm CDs with a diameter of 8 cm or CDs manu factured in the shape of a mug for exam ple are not suitable for use with this equip ment Using such CDs can very likely result in the destruction of the CD and the CD drive We assume no responsibility for damages caused by using unsuitable CDs After you have inserted the magazine keep the door of the magazine closed to prevent contamination 38 Switching to the CD changer mode Make sure that at least one CD has been inserted into the magazine Press SRC SC to change the audio source Press SRC SC repeatedly until the CD functions appear in the display Inserting a CD Insert one or several CDs into the maga zine printed surface facing up Slide the magazine into the CD changer in the direction of the arrow The CDs are counted from bottom to top Ejecting a CD Open the door of the CD changer and press the eject button CD playback Press
7. fader using the rocker switch Fader front w Fader rear lt Balance left Balance right The selected values will appear in the display The last setting is stored auto matically 27 Switching AUD off Press button briefly If you do not change the tone within 8 sec the AUD mode will quit auto matically Extra function LD Loudness boosts the bass frequency at low volume Press AUD longer than 2 seconds to change the Loudness setting LD will appear Important notes What you need to know Before using your new car radio please read through the following information carefully Traffic safety As the driver of a motor vehicle it is your re sponsibility to pay attention to the traffic situ ation at all times Never use your car radio in a way that could distract you Please keep in mind that you travel a distance of 14 m per second at a speed of only 50 km h Should the traffic situation become particu larly demanding we advise you not to use the radio 28 Always make sure that you are still able to hear any warning signals coming from out side the vehicle such as police or fire engine sirens so that you can react accordingly Consequently you should always select a moderate volume for playing your car radio while you are driving Installation If you would like to install your new car ster eo yourself or add other audio components to existing ones then please read the en clo
8. mode 3 Il Pause Interrupts CD play PAUSE appears Press button again to restart CD play 4 RPT Repeat title press 4 RPT REPEAT T appears briefly The title will be repeat ed until 4 RPT is pressed again Repeat CD select REPEAT D Switch REPEAT D on Hold 4 RPT down until a beep is emitted 5 MIX MIX CD plays the titles of one CD in random order MIX ALL plays the titles of all CDs of one changer magazine in random or der To turn MIX on off Press 5 MIX briefly The current setting is briefly indicated in the display MIX CD Switch MIX ALL on Hold 5 MIX down until a beep is emitted DIS clock display Radio mode Press this button briefly and the time will be displayed for a while Changer mode Press this button to switch the display between CD number and CD time indi cation Cassette mode Press this button to switch the display between the cassette direction and clock indication 22 AUD i DSC Direct Software Control Adjusts programmable basic settings Refer to DSC programming ENGLISH Default settings for treble and bass You can store different settings for the FM MW LW cassette and CD mode Zermatt RCM 149 without MW LW Setting the tone Select the audio mode Press AUD once and set the tone using the rocker switch Treble Treble w Treble Bass se Bass gt gt Bass Press AUD twice and set the
9. the control panel Then pull it off gently as illustrated If the set was still in operation it will turn off now All current settings remain stored If a cassette is inserted it will be kept in the set The radio will turn on automatically when you attach the release panel again Attaching the release panel Slide the panel B from the left to the guide of the chassis A Gently push the left side of the panel against the front of the chassis until it snaps into place 29 ENGLISH Selecting the audio mode Fixing the release panel Use the SRC SC source button to select between radio cassette and CD mode If you wish to fix the release panel perma nently to the chassis screw down the en The CD mode is not available unless a CD closed bolt at the left hand side of the chas Changer is connected sis into the hole C see Fig To select the operating mode Press SRC SC 30 Radio operation with RDS Radio Data System The Radio Data System will enhance your enjoyment when you listen to FM radio sta tions More and more radio stations broadcast RDS information along with their regular programming As soon as a programme has been identi fied the station name including a regional identifier if applicable will appear in the dis play for example NDR1 NDS regional pro gramme in Lower Saxony Germany When RDS is activated the preset buttons bec
10. 1 045 989 90 28 015 762 241 026 130 04 41 800 266 25 28 006 535 054 47 042 175 873 212 051 214 940 02 025 255 448 014 010 73 20 023 565 63 31 018 958 383 94 044 898 644 087 501 810 094 359 92 36 016 103 93 91 015 769 473 026 130 05 14 708 681 71 88 006 535 053 12 042 175 873 229 Blaupunkt Werke GmbH Bosch Gruppe C K7 VKD 8 622 402 056
11. PEAT D RPT appears in display field 3 as long as RPT is active REPEAT T or REPEAT D lights up briefly in display field 2 when you activate this func tion and each time the title changes Switch REPEAT T on Press 4 RPT briefly Switch REPEAT D on Hold 4 RPT down until a beep is emit ted MIX You can have the CD titles played in ran dom order The following options are possible Mix all titles of one CD MIX CD or Mix all titles of all CDs MIX ALL MIX appears in display field 3 as long as the MIX function is active MIX CD or MIX ALL lights up briefly in display field 2 when you activate this func tion and each time the title changes Switch MIX CD on Press 5 MIX briefly Switch MIX ALL on Hold 5 MIX down until a beep is emit ted ENGLISH 39 DSC programming The car radio has been equipped with DSC Direct Software Control to allow you to customise certain programmable basic set tings to suit your personal needs and pref erences and then store them The basic settings for this audio equipment were made at the factory In the following you can find an overview of these settings so that you can always reset to them if desired If you wish to alter any of the programming press DSC MENU V A will light up in the display Use the V A buttons of the rocker switch to select the function you wish to change The display will s
12. Press this knob and remove the release panel 2 ON Power up down Press this button to turn the equipment on It will play at the preset volume If you press this button briefly during ra dio reception the volume will turn down instantly MUTE This function is cancelled by pressing the ON button again You can pro gramme the mute volume refer to DSC programming Press the button for about 2 seconds to turn the unit off Switching on off via the ignition If the set has been connected corre spondingly it can also be turned on and off with the vehicle ignition Press the ON button to keep on oper ating the set when the ignition is switched off The set will switch on To avoid that the battery goes flat the system will be turned off automatically after one hour of playback 3 Volume knob Turn the knob to set the volume 4 amp Eject Press this button to eject the cassette 5 Cassette slot Insert the tape into the slot with the open side showing to the right The tape will be played in the direction pre viously selected 6 Display Displays all settings operating modes and functions 7 FR Fast Rewind To fast rewind the tape FF Fast Forward To fast forward the tape 7 8 Reversing the tape PROG Press both buttons simultaneously 9 Rocker switch ENGLISH Radio mode lw Seek tuning A Up K Down lt lt gt gt Up down in short intervals on FM only if
13. Radio Cassette Albertville RCM 149 Zermatt RCM 149 Aspen DJ Operating instructions BLAUPUNKT Bosch Gruppe Display The display consists of three fields and changes according to the operating mode and function ge CD Wu LL I e s e E LE NN ato ES x o mr 5 z D Display field 1 Display field 2 Display field 3 Radio mode Radio mode Displays active functions Memory banks and wavebands Radio frequency or station name C Stereo Brief indication of preset station e g P1 PTY programme type Cassette inserted AS CD changer connected Cassette mode Cassette mode LD Loudness CAS cassette inserted TAPE1 TAPE2 side of tape being played f Displays active function Radio mode Changer mode AF RDS alternative frequency Curentirack Changer mode PTY RDS programme type CD number being played by changer TA Priority for traffic information Audio CD time elapsed time TP Traffic programme station Numeric and graphic representation of the Brief indication of functional changes GE volume and audio settings DSC CD changer mode DSC Serves as display and entry field during DSC RPT Repeat function programming MIX Titles played at random Permanent display for DSC programming Graphic representation of the adjusted vol ume level Clock display Miscellaneous Indicates new source e g when changing from radio to cassette 23 Contents Display
14. ction on Storing programme types b Using the buttons on the rocker switch When PTY is switched on you can select a programme type using buttons lt lt gt gt Press lt lt or gt gt the programme type selected last will be displayed for 3 seconds During this period press gt gt for wards or lt lt backwards to select the desired type Press lt lt or gt gt as many times as required If you would like to listen to a station with the selected PTY e press A V to start the seek tuning function If the radio is unable to find a station offer ing the selected programme type the dis play will show NO PTY and a beep tone will be emitted The radio will select the sta tion which was tuned into before seek tun ing was activated Storing programme types Each of the preset buttons 1 6 has been assigned one programme type at the facto ry If desired you can also replace these with other available programme types To do so make sure that PTY lights up in the display e If necessary press the PTY button to switch on the function Select a programme type using but tons and hold down the desired preset button 1 6 until you hear a beep Now the selected programme type can be recalled by pressing this preset if PTY lights up in the display Scanning stations with PTY SCAN Requirement PTY must appear in the dis play Press th
15. ctive during fast winding of the tape the set will switch to the radio and play the station previously re ceived SCANTIME Use this function to set the AUX DISPLAY scan time for the radio or CD player from 5 to 20 sec onds Select AUX ON if you wish to connect a Discman or Walkman instead of the CD changer Contact your deal er for more information ON OFF Display indications on or off with the car radio turned off Overview of the DSC factory settings LOUDNESS TA VOL REG SENS CLOCKTYPE CLOCKSET ON VOL MUTE BEEP RM SCANTIME AUX DIS 3 40 OFF DX1 CLOCK 24 20 10 3 OFF 10 sec OFF OFF 41 ENGLISH Appendix Specifications Amplifier Output power 4x23 W RMS power acc to DIN 45324 at 14 4V 4 x 35 W max power Tuner Wavebands FM 87 5 108 MHz MW 531 1602 kHz LW 153 279 kHz Zermatt RCM 149 without ML LW FM frequency response 35 16 000 Hz Cassette Frequency response 35 16 000 Hz 42 CD player Optional Albertville RCM 149 Zermatt RCM 149 Included Aspen DJ Frequency response 20 20 000 Hz Subject to modifications Service numbers Tel Fax Deutschland Belgique France Nederland Great Britain Danmark Sverige Suomi Osterreich Greece Ceska republika USA Singapore Slovensko 5 99 018 050 002 25 025 255 444 014 010 70 07 023 565 63 48 018 958 383 66 044 898 360 087 501 500 094 359 9
16. d number of RDS stations at the present time 35 ENGLISH Traffic programme station reception with RDS EON The abbreviation EON stands for En hanced Other Networks which means that information is exchanged within a radio net work Many FM radio stations provide their serv ice area with traffic messages at regular in tervals Along with their programmes all traffic pro gramme stations transmit a special carrier signal which is decoded by your car radio If this signal is identified TP will appear in the display Traffic Programme In addition to these there are also stations which do not actually transmit traffic infor mation themselves but by using RDS EON it is possible for them to forward the traffic messages broadcast by another traffic programme station in the same radio net work If you want to have the priority for traffic announcements activated while listening to one of these stations e g NDR4 TA must appear on the display panel If a traffic announcement is broadcast the radio will automatically switch to the linked traffic programme station in this case NDR2 for the duration of the message and return to the original programme NDR4 afterwards 36 Traffic announcement priority on off If the priority for traffic announcement pro grammes is activated TA will light up in the display To switch the priority on or off Press the AF TA button TA appears If yo
17. e SRC SC button until you hear a beep All of the stations in your current re ception area offering the selected pro gramme type will be scanned To switch off PTY SCAN Press SRC SC or the seek tuning rocker switch once again PTY priority Situation PTY is switched on and lights up in the dis play No station offering the selected programme type can be found currently in your recep tion range with seek tuning or scan The set will switch back to the station previ ously tuned into As soon as it is possible to receive a pro gramme in the broadcasting network with the PTY selected the radio will switch over to the corresponding station for the dura tion of the programme Example German broadcasting network NDR Station playing NDR3 PTY lights up in the display Programme type POP selected Seek tuning is started No station with PTY POP can be found The display shows NO PTY and automatically switches back to NDR3 NDRe airs a PTY POP programme The radio will switch to the linked sta tion NDR2 for the duration of the POP programme During cassette or CD operation the set will also switch to the programme offering the selected PTY within the broadcasting net work After the PTY programme has ended the system will switch back to the previous mode radio cassette or CD Note As already mentioned these functions are only supported by a limite
18. hecking the programme type of the Statio N eerste coc aides ates eate sett 34 Displaying the selected programme Wl 34 Selecting a programme type 34 Storing programme types ss neeeeee 35 Scanning stations with PTY SCAN 35 PTY ptlority hee Des 35 Traffic programme station reception with RDS EON 36 Traffic announcement priority on off 36 Warning beep sessirnir 36 Switching the warning beep off 36 Automatic seek tuning start Cassette and CD changer operation 36 Adjusting the volume for traffic announcements and the warning beep 37 Cassette deck operation 37 Cassette playback sssseseeeeeenensennnenne 37 Cassette ele 37 Fast ill ue E 37 Reversing the tape 37 Traffic information during cassette playback ssss 37 CD changer operation 38 Switching to the CD changer mode 38 Inserting a CD 38 Ejecting a CD iv BIOS 38 CD playback ssessseeeesss 38 Selecting a CD 38 Selecting a title esssusse 39 SCAN EE 39 RPT ig schede ie AUN 39 Klee E DE 39 DSC programming 40 Overview of the DSC factory SOMINGS iine ere Pete Dien 41 Appendix ee 42 Specifications sess 42 Installation instructions 163 Quick reference Q REL To release the detachable panel theft protection
19. how you the setting you have selected Press the lt lt gt gt buttons of the rocker switch to change the values Confirm the setting you have selected by pressing the DSC button Select function Adjust recall value AIV lt lt gt gt 40 LOUDNESS Loudness boosts the bass TA VOL REG SENS DX1 frequencies at low volume LOUD 1 Low boost LOUD 6 Max boost The traffic announcement and warning beep volume can be set between 0 to 66 The message will then come through at this volume if the standard volume is lower If the standard volume is set higher than the TA VOL lev el then the traffic report will be played at the standard volume Regional function on off To adjust the seek tuning sensitivity LO stands for local recep tion DX stands for distant re ception Select LO 3 if you want to receive strong stations in the local area select DX 1 if you want to tune into weaker stations which are further away CLOCK 24 CLOCKSET ON VOL MUTE BEEP X RM OFF To switch between 12 h and 24 h clock display To set the clock manually Press to select hours minutes Press zw to adjust the flashing value To set the turn on volume Press to adjust the turn on volume as desired To change the mute volume To change the volume of the acknowledgement tone beep between 0 and 9 0 off Radio Monitor If the Radio Monitor function is a
20. is volume was preset at the fac tory you can use the DSC function to alter the setting see DSC programming TA VOL Cassette deck operation Cassette playback Insert the tape into the slot with the open side showing to the right Press SRC SC to select the tape deck mode TAPE 1 or TAPE 2 will appear The tape will be played in the direction previously selected Cassette eject Press amp to eject the cassette Fast winding Press the FF or FR button to fast forward FF or fast rewind FR the tape during cas sette operation FORWARD or REWIND lights up in the display When the end of the tape is reached with fast winding the tape direction will change and the other side of the tape will be played With Radio Monitor ON during fast wind ing you can listen to the radio programme previously selected It is possible to change the Radio Monitor setting in the DSC mode Refer to DSC programming RM Reversing the tape To change the tape direction during cassette playback Press FR FF simultaneously The display shows TAPE 1 or TAPE 2 for the selected tape side Traffic information during cassette playback The Traffic Announcement function priori ty for traffic programmes makes it possible to receive traffic information during cassette playback If a traffic message is broadcast cassette playback will stop and the message reproduced This function is
21. lt lt gt gt buttons to tune into stations in your reception area If it is possible to receive several pro grammes in the same broadcasting network you can scroll through them in the forwards direction by pressing gt gt or backwards using the lt lt button e g NDR 1 2 3 4 N JOY For this to work properly you must have al ready tuned into the stations at least once and AF must be active lights up in the dis play 32 To do this you can start the Travelstore seek operation Press BA TS for 2 seconds the sys tem will start to run through the fre quency band If AF is not lit up Hold AF TA down A beep sounds and AF appears This fulfils the requirements for selecting stations with lt lt gt gt Switching between the memory banks FM You can switch between the memory banks 1 2 and T in order to store stations and re call them later The currently selected memory bank ap pears in the display Press the BA TS button as many times as necessary until the desired memory bank lights up in the display Storing stations On FM you can store six stations on the preset buttons 1 2 3 4 5 6 for each of the memory banks 1 2 T On MW LW you can also store six stations each Zermatt RCM 149 without MW LW e Select the appropriate waveband by pressing BA TS Tune in a station with the rocker switch either automatically A V or manually lt lt gt g
22. ock Display priority To switch the display priority press the button until you hear a beep Press as many times until the desired display mode is ac tive not during radio reception Radio mode Press the button briefly to display the clock Cassette mode Press this button to switch the display be tween the cassette direction and clock indi cation Changer mode Press the button briefly to switch the dis play between the CD number playback time and clock indication Setting the clock Press DSC briefly Press A V to selection the CLOCK SET function e Press lt lt gt gt to set the hours or min utes The adjustable option will flash in the display e Press A V to adjust the flashing value e After you have set the clock press DSC briefly to store the new setting Release panel Theft protection This unit is equipped with a detachable con trol panel A car radio without control panel is worthless for thieves Protect your car radio and detach the con trol panel when you leave your car It is very easy to attach and detach the release pan el thanks to its specific design Note Do not pull the release panel straight out from the chassis but detach it as illustrated below Be sure not to drop the panel Do not expose the release panel to direct sunlight or other heat sources Do not leave it in a humid place Detaching the release panel Press the REL button to release
23. ome programme buttons You now know exactly which programme you have tuned into making it easy to find the desired sta tion quickly But RDS offers you further advantages AF Alternative frequency The AF Alternative Frequency function makes sure that the radio always tunes into the strongest frequency of the currently se lected programme automatically This function is activated when AF appears in the display In order to switch this function on or off press the AF TA button until a beep is emitted While searching for the strongest reception signal the radio may switch to mute briefly If SEARCH appears in the display when the radio is switched on or one of the stored frequencies recalled the unit is already au tomatically searching for an alternative fre quency SEARCH will disappear from the display when the alternative frequency has been found or after the frequency band has run through completely If the reception quality of the selected pro gramme deteriorates beyond a certain point Tune into another station REG regional programme Certain radio programmes are split up at times into regional programmes offering lo cal information The 1st programme broad cast by NDR for example offers pro grammes with different contents in the north ern German states of Schleswig Holstein Hamburg and Lower Saxony at certain times of the day If you are listening to a particular regional prog
24. ramme and wish to continue doing so select REG ONT in the DSC mode If you leave the service area of the regional programme you are tuned into or if you would like to take advantage of full RDS service switch to REG OFF in the DSC mode Selecting a waveband With this car radio you can select between the following wavebands FM87 5 108 MHz MW 531 1602 kHz LW153 279 kHz Zermatt RCM 149 without MW LW Select the desired waveband by press ing the BA TS button ENGLISH Station tuning Automatic seek tuning A V Press A V the car radio will automati cally search for the next station If you hold A V pressed up or down on the rocker switch seek tuning will speed up in the upwards or downwards direction Automatic seek tuning A Up v Down lt lt gt gt Up down in short intervals on FM only if AF is switched off 31 Manual tuning with lt lt gt gt You can also tune into a station manually Requirement AF and PTY must be switched off i e the symbols do not light up in the display If necessary deactivate these functions Press AF TA or PTY Manual tuning Press lt lt gt gt the frequency will change in short intervals in the downwards or upwards direction If you hold lt lt gt gt pressed to the left or the right on the rocker switch the frequency scan will speed up Scrolling through the broadcast ing networks FM only You can use the
25. rt flashing in the display During the actual scanning process SCAN will appear in the display To select a scanned station and switch off the Scan function e Press SRC SC briefly If no station is selected scan will start again Changing the scan time The scan time can be selected from between 5 to a maximum of 20 seconds If you would like to alter the scan time please refer to the section on DSC program ming SCANTIME Selecting the automatic tuning sensitivity You can alter the automatic tuning sensitiv ity If lo is displayed the radio will only pick up strong local stations low sensitivity If lo does not light up the radio will also pick up weaker more distant stations high sensitivity If you would like to alter the sensitivity level please refer to the section on DSC program ming SENS PTY Programme Type PTY is an RDS service offered by an in creasing number of broadcasting stations This feature allows you to select FM stations according to their programme type After you have chosen the PTY of your pref erence the corresponding stations can be selected either by seek tuning or using the scan function ENGLISH Programme types Turn PTY on Use lt lt gt gt to have the last selected pro gramme type displayed and to choose a new one You can select any one of the stored types with the preset buttons 1 6 The following list indicates some of the pro
26. sed instructions on installation and con nection carefully In order to ensure that the set operates prop erly the positive power supply line must be connected via the ignition and the perma nent 12 V lead Do not ground the loudspeaker outputs A Warning note Danger of damaging the automatic power antenna in a car wash Before you drive into a car wash e switch the radio off by pressing the ON button The power antenna will retract if it doesn t press ON again Do not drive into the car wash unless the power antenna has retracted Guarantee The scope of the guarantee is determined by the laws in the country where the unit was purchased Regardless of the legal guarantee regula tions Blaupunkt affords a 12 month guar antee Your cash register receipt is a valid guarantee coupon If you have any questions about the guar antee please contact your dealer He will be happy to assist you repair your equip ment or forward itto an authorised Blaupunkt repair shop In addition our employees are there to help you on our service hotline You will find the telephone and fax numbers on the last page of this manual International telephone informa tion Have you got any questions on the operation of this equipment or do you require more in formation Give us a call You will find the international telephone and fax numbers on the last page of this manual Clock This car radio is equipped with a built in cl
27. t Press the desired preset button until the radio resumes play after the mut ing takes approximately 2 seconds confirmed by a beep Now the station has been stored The display will indicate which preset but ton is currently activated Automatically storing the strongest stations with Travel store You can automatically store the six most powerful FM stations in your current recep tion area sorted according to their signal strength This function is particularly conven ient on longer trips Press the BA TS button for 2 seconds T STORE will appear in the display The six strongest FM stations will be auto matically stored on the memory bank T Travelstore When this process has been completed the radio will play the strongest station If desired stations can also be stored man ually in the Travelstore bank see Storing stations Recalling stored stations You can recall any stored station at the touch of a button Select the waveband by pressing BA TS For FM also choose the corre sponding memory bank by pressing the BA TS button as many times as necessary until the desired bank ap pears in the display Press the corresponding preset button briefly to recall the station Scanning stations with Radio Scan You can scan through all of the stations in your reception area To start the Scan function Press SRC SC longer The scanned frequency or the station name will sta
28. u press AF TA while a message is be ing broadcast this message will be inter rupted The unit will then switch back to the previous mode The priority for other traffic messages remains active Please note that several buttons have no function while a traffic announcement is broadcast Warning beep If you leave the reception area of the traffic programme station currently tuned into you will hear a warning beep after approximate ly 30 seconds This alarm tone will also be emitted if you press a preset button for a station which does not send the traffic programme signal TP Switching the warning beep off a Tune into another station offering traf fic information Press the rocker switch or press a preset button which has a traffic programme station allocated to it Alternatively b Switch off the priority for traffic an nouncements Press TA TA will disappear from the dis play Automatic seek tuning start Cassette and CD changer operation If you leave the reception area for the traffic programme station you have tuned into while you are listening to a cassette or CD the system will automatically start search ing for a new traffic programme If no such station is found within approxi mately 30 seconds a warning beep will sound every 30 seconds To switch the warning beep off proceed as described above Adjusting the volume for traffic announcements and the warning beep Although th
Download Pdf Manuals
Related Search