Belkin RK4000 User's Manual
Contents
1. BELKIN RK4000 INSTRUCTIONS RK4000 Product Inventory Corner Post 4 3 8 16 x 1 Hex Head Bolt 16 3 8 Split Lock Washer 16 Nut Plate 8 Top Bottom Panel 2 1 4 20 Hex Nut 8 M6 Screws 50 M6 Cage Nuts 50 Instructions 1 Take two of the U Shaped mounting rails and place them on the floor such that the RMU markings are facing in opposite directions 2 Make sure that the RMU markings start with 1 at the same end 3 Take the bottom panel the one without the Belkin logo and then insert the side of the two mounting rails onto the bottom panel Repeat with top panel 4 Align the bolt holes and place nut plate on inside of mounting rail start 3 8 bolt with lock washer 2 times Repeat with top panel Hand tighten See Detail A 5 Turn the rack over and repeat step 4 Make sure your U markings match on all uprights 3 8 16 x1 Hex Head Bolt Nut Plate 3 8 Split Lock Washer www belkin com Belkin Corporation 501 West Walnut Street Compton CA 90220 5221 USA Tel 310 898 1100 Fax 310 898 1111 2005 Belkin Corporation All rights reserved All trade names are registered trademarks of respective manufacturers listed RK4000 Instructions Page 1 P35779 BELKIN Instructions cont d 6 Stand the frame upright This should be done with at least two people 7 Square rack using a level or carpenter square and tighten the assembly bolts 8 Take the 1 4 20 hex nut and p2. lace and tighten them over the studs inside each mounting rail Do not over tighten See Detail B Detail B A Rack frame has to be bolted to the floor before equipment is mounted www belkin com Belkin Corporation 501 West Walnut Street Compton CA 90220 5221 USA Tel 310 898 1100 Fax 310 898 1111 2005 Belkin Corporation All rights reserved All trade names are registered trademarks of respective manufacturers listed RK4000 Instructions Page 2 P35779
Download Pdf Manuals
Related Search