Behringer Y600 User's Manual
Contents
1. BASS SYNTHESIZER BSY600 Ultimate Bass Synthesizer Effects Pedal Thank you for showing your confidence in us by purchasing the BEHRINGER BASS SYNTHESIZER BSY600 This high quality effects pedal reproduces the fat and powerful sound of classic analog synthesizers at the touch of a footswitch 1 Controls C The DIRECT control adjusts the level ofthe CX direct unaffected signal Miera 2 The EFFECT control adjusts the levelofthe 2 H x synthesizer effect signal 3 The RES onance control adjusts the ann ine 9 strength of the low pass filter frequency BASS peak see below 10 SYNTHESIZER The FREQ uency control adjusts the IR OUT EXP4 11 low pass allpass filter frequency which monoms CEAC cuts the high frequencies and therefore determines the upper and lower limit of the frequency range the filter moves along The DECAY RATE control has 2 different functions Depending on the MODE switch position see below it adjusts either the LFO speed that modulates the amplitude of the filter frequency RATE mode 3 and 6 only or sets the time over which the filter frequency moves DECAY When the decay time is set to MAX the cut off filter frequency is fixed 5 Use the MODE switch to dial up one of 11 synthesizer modes with 4 different waveforms SAW sawtooth wave that produces sharp edged sound SAW sawtooth wave one octave lower than mode 1 SAW sawtoot2. IVE OWNERS MUSIC GROUP ACCEPTS NO LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION PHOTOGRAPH OR STATEMENT CONTAINED HEREIN COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS ONLY FULLFILLERS AND RESELLERS ARE NOT AGENTS OF MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSIC GROUP BY ANY EXPRESS OR IMPLIED UNDERTAKING OR REPRESENTATION THIS MANUAL IS COPYRIGHTED NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS ELECTRONIC OR MECHANICAL INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND FOR ANY PURPOSE WITHOUT THE EXPRESS WRITTEN PERMISSION OF MUSIC GROUP IP LTD ALL RIGHTS RESERVED 2012 MUSIC Group IP Ltd Trident Chambers Wickhams Cay P 0 Box 146 Road Town Tortola British Virgin Islands behringer com behringer
3. h wave with automatic filter frequency shifting SQUARE square wave that produces milder sound than the sawtooth modes SQUARE similar to mode 4 with additional square wave one octave below SQUARE square wave with automatic filter frequency shifting PULSE pulse wave that produces sharp edged sound different from sawtooth modes PULSE pulse wave with all pass filter for more depth and motion so PN DMF WN gt PULSE pulse wave with pulse width modulation for fat spre ading sound WAVE input signal is directly transformed to a synthesizer sound Filter rises when string is played and returns gradually 11 WAVE similar to mode 10 but filter drops when string is played and returns gradually The ON BATT LED illuminates when the effect is activated and flashes when the PITCH HOLD function is active see below It also serves as a battery level indicator Use the footswitch to activate deactivate the effect Keeping the footswitch depressed will activate the PITCH HOLD function modes 1 9 only that causes the unit to output the effect signal continuously even if the bass is not played at this moment ON BATT LED flashes You can also play the bass while keeping the footswitch pressed and mix the continuously output effect signal with the direct bass signal Release the footswitch to deactivate this function Use this 14 TS IN connector to plug in the instrument cable 6 amp The two 4 TS OUT and DIR OUT connecto
4. rs send the signal to your amp Use both connectors if you want to separate the unprocessed input signal gt DIR OUT and the synthesized signal gt OUT To mix both signals together use OUT only behringer com behringer BASS SYNTHESIZER BSY600 Use the 14 TRS EXP ression connector to connect an expression pedal This way you can externally control the movement of the filter frequency DECAY or for mode 3 and 6 the speed of the effect RATE When using an expression pedal the DECAY RATE control determines the max value expression pedal fully pressed Use the DC IN connection at the front of the unit to plug in a 9 V power supply not included The BATTERY COMPARTMENT is located underneath the pedal cover To install or replace the 9 V battery press the hinges with a ballpen and remove the pedal cover Be careful not to scratch the unit The BSY600 has no on off switch As soon as you insert the plug into the in connector the BSY600 begins running When not using the BSY600 remove the plug from the in connector This extends the life of the battery The SERIAL NUMBER is located at the underside Inrare cases interferences of the normal function may appear by external influence e g electrostatic discharge as for example sound disturbances or malfunctions If this occurs please turn down the volume on subsequent amplifiers and disconnect the input connector briefly to restart the application 2 Safety Inst
5. ructions Do not use near water or install near heat sources Use only authorized attachments accessories Do not service product yourself Contact our qualified servicing personnel for servicing or repairs especially when power supply cord or plug is damaged 3 Warranty Please register your new BEHRINGER equipment right after your purchase by visiting http behringer com and read the terms and conditions of our warranty carefully 4 Specifications CD 220 50 Connector MA TS Korea 220 V 60 Hz Impedance 500 kd Japan 100 V 50 60 Hz Power connector 2mm DCjack ut negative enter Connector TS Battery 9V type 6LR61 Impedance 1kQ Power consumption 30mA Connector TS Dimensions approx 2 Vex 234x444 Impedance 1k0 HxWxD approx 54x 70 x 123 mm Weight approx 0 73 Ibs 0 33 kg 9 V 100 mA regulated BEHRINGER is constantly striving to maintain the BEHRINGER PSU SB highest professional standards Asa result ofthese efforts modifications may be made from time to time to existing USA Canada 120 V 60 Hz products without prior notice Specifications and appearance Europe U K 230 V 50 Hz may therefore differ from those listed or shown Australia TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED BEHRINGER IS PART OF THE MUSIC GROUP MUSIC GROUP COM ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECT
Download Pdf Manuals
Related Search