Avenview EDID Reader / Writer C-EDID-RW User's Manual
Contents
1. Avenview EDID Reader Writer User s Guide Models C EDID RW 2008 Avenview Inc All rights reserved The contents of this document are provided in connection with Avenview Inc Avenview products Avenview makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice No license whether express implied or otherwise to any intellectual property rights is granted by this publication Except as set forth in Avenview Standard Terms and Conditions of Sale Avenview assumes no liability whatsoever and disclaims any express or implied warranty relating to its products including but not limited to the implied warranty of merchantability fitness for a particular purpose or infringement of any intellectual property right Reproduction of this manual or parts thereof in any form without the express written permission of Avenview Inc is strictly prohibited Avenview www avenview com Fal Table of Contents SECU IOI GUNG Ua COG eecatccacen sence sant csae sc acetenoseaesatesosee E 3 1 1 PME D Sh UA IS vacate Sats tea EEE E cc EEEE AA AAE EEA 3 1 2 Salei IMSUFUCTIONS sr E 3 1 3 Regulatory Notices Federal Communications Commission FCC esessssessessseeresrrrereerrrrrresn 4 1 4 OU UUM eco E cece aetna E E E E anes 4 1 5 PaK EE CONO e EE 4 1 6 Berore US aO r E A2. E EE E 4 1 7 PEC DOS O aa anaen eget svaranes sacar couesacansseur a auraneeaaneuceeuecoaeee nesses 5 1 8 EPS WPCC OM mC O E E E 6 1 9 Hardware Installation su viscsssenersssavecsamcasanenaanventioeannetasernedtaneadeasieetenseinaaeautuncensdeunstdauteoeduneeaneies 7 1 9 1 Read the EDID from a Display siccccsscncsccasiencesrdeccroausdedusnidseasunrisecweandsaeiammieadayasissaaameieenencesaans 7 192 Recall the default Universal EDID cccccccssssssseccccccseeeseeeccccessaeeeseeeececesseueeseeeeseeeesaeas 7 1 9 3 Write EDID to Display exisssssncisevsctecassenickdecsstesratonbebsecentesanbonsadseveeenssat aiubandisuncbopedeatsiovsneesaenens 7 LIO Sonwa Malato eer A EE E 7 LOT REO EDID e o E E E E E 8 LIOS W eE DID era E S 8 TIOS DHMO Or WIG se n E S 9 OOA PECETON e E cues maseddensesaeuconsasauees eens saneeeestobanecos 9 Avenview www avenview com al Section 1 Getting Started 1 1 Important Safeguards Please read all of these instructions carefully before you use the device Save this manual for future reference What the warranty does not cover e Any product on which the serial number has been defaced modified or removed e Damage deterioration or malfunction resulting from e Accident misuse neglect fire water lightning or other acts of nature unauthorized product modification or failure to follow instructions supplied with the product e Repair or attempted repair by anyone not authorized by us e Any dam
3. age of the product due to shipment e Removal or installation of the product e Causes external to the product such as electric power fluctuation or failure e Use of supplies or parts not meeting our specifications e Normal wear and tear e Any other causes which does not relate to a product defect e Removal installation and set up service charges 1 2 Safety Instructions The C EDID RW EDID Reader Writer has been tested for conformance to safety regulations and requirements and has been certified for international use However like all electronic equipments the C EDID RW should be used with care Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit Do not dismantle the housing or modify the module Dismantling the housing or modifying the module may result in electrical shock or burn Refer all servicing to qualified service personnel Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage or other hazards Keep the module away from liquids e Spillage into the housing may result in fire electrical shock or equipment damage If an object or liquid falls or spills on to the housing unplug the module immediately Have the module checked by a qualified service engineer before using it again e Do not use liquid or aerosol cleaners to clean this unit Always unplug the power t
4. er you have changed the position of the DIP Switch DO NOT plug DVDI cable into PC DVI connector when you are changing from one mode to another Avenview WwWW avenview com 1 9 Hardware Installation To setup Avenview C EDID RW follow these steps for connecting to a device 1 9 1 Read the EDID from a Display 1 Before connecting the Power and other devices to C EDID RW set the DIP switches at the bottom of C EDID RW at 1 OFF 2 ON Connect your monitor to the C EDID RW and plug in 5V DC Power cord Remove 5V DC power cord when the green LED turns off Connect the C EDID RW to your computer by a DVI cable and boot up your computer 1 9 2 Recall the default Universal EDID 1 Before connecting the Power and other devices to C EDID RW set the DIP switches at the bottom of C EDID RW at 1 ON 2 ON Plug in 5V DC power cord and remove the power when the green LED turns off Connect your monitor to C EDID RW Connect the C EDID RW to your computer by a DVI cable and boot up your computer 1 9 3 Write EDID to Display 1 Before connecting the Power and other devices to C EDID RW set the DIP switches at the bottom of C EDID RW at 1 ON 2 OFF Plug in 5V DC power cord Connect your monitor DVI cable and computer s RS232 cable to C EDID RW Boot up your computer and install the software E E a Refer to software installation below 1 10 Software Installation Before launching the software installation please make sure 1 The power supply is
5. incomplete EDID Therefore DVI Monitor Write is not recommended to Always make a backup copy of monitor s EDID before proceeding Click on Analyze button or you can load the previously saved EDID information in the analysis use windows by clicking on Load File button Click on DVI Monitor Write button wait for Finish writing EDID data from PC to Monitor to display Section 2 Specifications Video Bandwidth 1 65 Gbps Display Side Connector 1 x DVI I female digital only 256 byte Power Supply 5V DC 2Amp Dimension L x W x H 3 3 x 1 6 x 1 1 180g 6 302 Environmental Avenview WwwW avenview com ral Avenview Disclaimer While every precaution has been taken in the preparation of this document Avenview Inc assumes no liability with respect to the operation or use of Avenview hardware software or other products and documentation described herein for any act or omission of Avenview concerning such products or this documentation for any interruption of service loss or interruption of business loss of anticipatory profits or for punitive incidental or consequential damages in connection with the furnishing performance or use of the Avenview hardware software or other products and documentation provided herein Avenview Inc reserves the right to make changes without further notice to a product or system described herein to improve reliability function
6. nction e Don t place the product in too high temperature over 50 C too low temperature under 0 C or high humidity e Use the DC power adapter with correct specifications If inappropriate power supply is used then it may cause a fire e Do not twist or pull by force ends of the optical cable It can cause malfunction Avenview WwwW avenview com a 1 7 Panel Description FRONT PANEL 5V Monitor DVI ORC 1 DVI Port for Display 2 Power Connector 3 Red LED Power indicator 4 Green LED Indicates EDID s writing REAR PANEL PC DVI 5 6 5 RS232 Port 6 DVI Port for connecting the PC Avenview WwWW avenview com o 1 8 DIP Switch Configuration 1 2 Mde FN Recording Connect the monitor to the DVI monitor connector Once the recording process is completed C EDID RW has copied the EDID from the monitor into flash memory the green LED will turn off Writing Default Write the default EDID into C EDID RW to replace the existing EDID in the C EDID RW Once the writing process is completed the green LED will turn off OF eotitteromeceomaw nn Pomenbtereyeusonmectyowe computer to the C EDID RW To avoid initiating undesired errors during switching between modes e g changing from Recording mode to Connection mode might overwrite the EDID of display in the C EDID RW by default EDID please unplug the power cord before you change on of the above modes to another Plug in the power cord aft
7. o the device before cleaning Avenview WwWW avenview com Em 1 3 Regulatory Notices Federal Communications Commission FCC This equipment has been tested and found to comply with Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation Any changes or modifications made to this equipment may void the user s authority to operate this equipment 1 4 Introduction Avenview C EDID RW can emulate the EDID Extended Display Identification Data information It stores and recalls a default EDID setting in non volatile memory allowing your computer boot directly from EDID Reader Writer It can also read and store the EDID of your display and even let you modify the EDID and upload the modified EDID to displays Keeps computers from deactivating inactive DVI port Reads and remembers the EDID of displays Writes EDIDs into the EDID Reader Writer or the displays Default EDID built in No power required after initial programming Maintains DVI video resolution Easy configuration 1 5 Package Contents Before you start the installation of the converter please check the package contents C EDID RW x1 Power Adapter 5VDC 2A x1 DVDIM M 6 foot cable optional x1 User s Manual x1 1 6 Before Installation e Put the product in an even and stable location If the product falls down or drops it may cause an injury or malfu
8. or design With respect to Avenview products which this document relates Avenview disclaims all express or implied warranties regarding such products including but not limited to the implied warranties of merchantability fitness for a particular purpose and non infringement Avenview WwWW avenview com
9. well connected 2 DIP switches are at the right position as shown below Avenview WwWW avenview com 7o 8 8 12 3 5 9 TE Port Select COM I Rmi AAA 6 10 Her es wmm fi y7 Auto Sean ComPort DVI Moniter Weier t 1 Ensure that power is connected and proper Com Port is selected Then click on Auto Scan ComPort 1 10 1 Read EDID Ifyou would like to read EDID information from the connected monitor simply click on the button Read EDID If everything is connected properly you will see a message Finish reading the EDID data from PC to EDID Clone Click on Analyze button to make a quick analysis on the read EDID information which users can monitor or modify To save the EDID information for future reference click on Save File button 1 10 2 Write EDID You can modify EDID content in the pop up after clicking Analyze button Also you can load the previously saved EDID information in the analysis window by clicking on Load File button While finish editing EDID content you can click on Write EDID button to write the EDID information to EDID Reader Writer Avenview WwWW avenview com 1 10 3 DVI Monitor Write Please ensure that all cables are connected securely and both monitor and C EDID RW are connected to backup power supply If during EDID update to DVI monitor a power surge happens or serial cable is not unplugged then this might result in
Download Pdf Manuals
Related Search