Avaya AP-8 Application Note
Contents
1. At a minimum a value must also be assigned to the following FNEs for dual mode operation SELECT 32001 ACTIVE_APPEARANCE HELD_APPEARANCE_SELECT 32017 IDLE_APPEARANCE_SELECT 32018 OFF_PBX_DISABLE 32023 OFF_PBX_ENABLE 32022 Optionally values used for defining the SIP profile for the Avaya one X Mobile can be set in the configuration file or by using the procedures in Step 4 Even if the SIP profile is defined in the configuration file the edit procedures in Step 4 must be used to edit the profile and set the Default access point to the WLAN access point profile created in Step 1 TestRm15 SIP PROFILE SIP PROFILE NAME TR15sip SIP DOMAIN business com SIP SERVER IP ADDR 10 75 5 6 SIP SERVER PORT 5060 SIP USERNAME 30115 SIP PASSWORD 123456 CM PRINCIPLE 30115 SIP PROFILE CTM Reviewed Solution amp Interoperability Test Lab Application Notes 16 of 22 SPOC 10 15 2007 2007 Avaya Inc All Rights Reserved oneXmobileAP8 Step Description If the SIP profile was not defined in the settings Ime file then it can be defined using the following procedure The SIP profile must be created from within Avaya one X Mobile and not through the Nokia device settings Avaya one X Mobile is not aware of profiles created direc2. auto cback Solution amp Interoperability Test Lab Application Notes 6 of 22 2007 Avaya Inc All Rights Reserved oneXmobileAP8 Step Description 4 Map the Avaya Communication Manager extension to the Avaya SES media server extension defined in Section 4 Step 5 with the add off pbx telephone station mapping command Enter the values as shown below Station Extension Avaya Communication Manager extension Application PVFMC Phone Number Avaya SES media server extension Trunk Selection The SIP trunk group number Configuration Set Enter a valid configuration set Configuration set 1 contains the default values A second mapping is required to map the Avaya Communication Manager extension to the Avaya one X Mobile cell phone number An example of this mapping is shown below even though cellular access was not checked as part of the testing Station Extension Avaya Communication Manager extension Application PVFMC Phone Number Avaya SES media server extension Trunk Selection The SIP trunk group number Configuration Set Enter a valid configuration set Configuration set 1 contains the default values add off pbx telephone station mapping 30115 Page STATIONS WITH OFF PBX TELEPHONE INTEGRATION Station Application Dial CC Phone Number Trunk Config Extension Prefix Selection Set 30115 PVFMC 30115 1 1 30115 PBEMC 23 17325552999 ars 1 5 On Page 2 set the Call Limit of the PVFMC map
3. Test Lab Application Notes 2 of 22 SPOC 10 15 2007 2007 Avaya Inc All Rights Reserved oneXmobileAP8 CTM Reviewed SPOC 10 15 2007 Avaya 4620SW H 323 IP Telephone Analog Telephone wa Avaya one X Mobile MN B 10 75 5 47 Avaya one X x30115 Desktop Edition Avaya AP 8 10 75 5 51 10 75 5 13 x30110 TFTP Server 10 75 10 52 10 75 5 155 x30102 Corporate LAN Avaya SIP Enablement Services 10 75 5 6 Avaya 4602SW SIP IP Telephone 10 75 5 153 x30104 Avaya G700 Media Gateway with a S8300 Server 10 75 5 2 Avaya 4610SW a SIP IP Telephone ISDN PRI Trunk 10 75 5 154 732 555 1234 x30107 732 555 1235 Avaya 6210 Analog Telephone Avaya 6408D Enterprise x30114 Digital Telephone Domain business com x30106 Figure 1 Avaya one X Mobile Test Configuration Solution amp Interoperability Test Lab Application Notes 2007 Avaya Inc All Rights Reserved 3 of 22 oneXmobileAP8 2 Eguipment and Software Validated The following eguipment and software firmware were used for the sample configuration provided Eguipment Software Firmware Avaya S8300 Server with Avaya G700 Media Avaya Communication Manager 4 0 Gateway Service Pack R014x 00 0 730 5 13566 with Avaya IA 770 Intuity Audix Avaya SIP Enablement Services SES 3 1 2 Avaya AP 8 v2 5 2 Avaya one X Mobile 4 2 Nokia E61 FW 3 0633 09 04 Avaya 4602SW IP Telephone SIP version 2 2 2 Avaya 4610SW IP Telephones Avaya 4620SW IP Telephones A
4. name Organization com Up Time DD HH MM SS 29 04 28 44 Object ID 1 3 6 1 4 1 11898 2 4 12 System Alarms This table displays information on the alarms SNMP Traps generated by the access point They should be deleted once they are reviewed and resolved The alarm severity levels are Critical Major Minor and Informational Select All gt Deselect Al gt Description Severity Time Stamp O AP Cold Started Informational OdaysOhrsOm12s F Link Up Informational 0 days 0 hrs 0 m 20s o Link Up Informational OdaysOhrsOm20s Del ete CTM Reviewed Solution amp Interoperability Test Lab Application Notes 12 of 22 SPOC 10 15 2007 2007 Avaya Inc All Rights Reserved oneXmobileAP8 Step Description 2 The initial network settings can be viewed by clicking the Configure button in the left pane followed by selecting the Network tab followed by selected the IP Configuration tab Bridge as RAD RADIUS Profiles W SSID VLAN Security IP Configuration DHCP Server DHCP RA Link Integrity This tab is used to configure the internet TCPAP settings for the access point These settings can be either entered manually static IP address subnet mask and gateway IP address or obtained automatically dynamic The DNS Client functionality can also be configured so that host names used for configuring the access point can be resolved to their IP addresses Note Changes to these
5. new profile perform the following Press the Menu button Navigate to Tools gt Settings gt Connection gt Access Points Select the Options soft button and navigate to New access point gt Use default settings The example below shows the WLAN access point profile settings used for testing Default values can be used for all other fields Connection Name TestRm15 This name will appear in the list of access points to identify the profile Data bearer Wireless LAN WLAN netw name tim This name must match the SSID configured in the Avaya AP 8 in Section 5 Step 3 Network status Public WLAN netw mode Infrastructure WLAN security mode Open network For simplicity the wireless network was configured as an open network without encryption and authorization More secure network options could also be used Click the Options soft button Navigate to Advanced Settings gt IPv4 settings DHCP or static IP addressing may be used The settings below show the use of a static IP address These settings were used for the testing Default values can be used for all other parameters o Phone IP address 10 75 5 47 o Subnet mask 255 255 255 0 o Default gateway 10 75 5 1 Click the Back soft button twice to exit the sub menus Click the Back soft button to exit the access point profile 2 Download the Avaya one X Mobile software from http support avaya com to a local PC containing the Nokia PC Suite software The Nokia PC Suite sof
6. the use of the Avaya one X Mobile as a SIP endpoint on a customer enterprise No cellular functionality or hand off testing was performed These Application Notes complement the product documentation by providing a concrete example of the configuration procedures of the Avaya one X Mobile as a WiFi SIP endpoint in the network configuration shown in Figure 1 1 1 Configuration Figure 1 illustrates the test configuration The test configuration shows an enterprise site with an Avaya SES and an Avaya G700 Media Gateway with an Avaya S8300 Server running Avaya Communication Manager Both devices are connected to the corporate LAN Also connected to the LAN is an Avaya AP 8 wireless access point through which the Avaya one X Mobile running on the Nokia E61 Dual Mode phone accesses the corporate network For simplicity the wireless LAN was configured as an open network without encryption or authentication Other endpoints on the enterprise include two Avaya 4600 Series IP Telephones with SIP firmware Avaya 4600 Series IP Telephones with H323 firmware an Avaya one X Desktop Edition an Avaya 6408D Digital Telephone and an Avaya 6210 Analog Telephone An ISDN PRI trunk connects the media gateway to the PSTN Two PSTN numbers assigned to the ISDN PRI trunk at the site is mapped to a local telephone extensions The TFTP server shown in Figure 1 provides the settings file for the Avaya SIP Telephones CTM Reviewed Solution amp Interoperability
7. AVAYA Avaya Solution amp Interoperability Test Lab Application Notes for Configuring Avaya one X Mobile Avaya AP 8 Avaya SIP Enablement Services and Avaya Communication Manager Issue 1 0 Abstract These Application Notes describes the procedures for configuring Avaya one X Mobile Avaya AP 8 with Avaya SIP Enablement Services SES and Avaya Communication Manager Avaya one X Mobile provides Avaya Communication Manager SIP feature functionality to a supported set of dual mode cellular phones The release of Avaya one X Mobile referenced in these Application Notes supports the Nokia E60 E61 and E71 S60 3 Edition Dual Mode smart phones The testing focused on the use of the Avaya one X Mobile as a WiFi SIP endpoint on a customer enterprise No cellular functionality or hand off testing was performed CTM Reviewed Solution amp Interoperability Test Lab Application Notes 1 of 22 SPOC 10 15 2007 2007 Avaya Inc All Rights Reserved oneXmobileAP8 1 Introduction These Application Notes describes the procedures for configuring Avaya one X Mobile Avaya AP 8 with Avaya SIP Enablement Services SES and Avaya Communication Manager Avaya one X Mobile provides Avaya Communication Manager SIP feature functionality to a supported set of dual mode cellular phones The release of Avaya one X Mobile referenced in these Application Notes supports the Nokia E60 E61 and E71 S60 3 Edition Dual Mode smart phones The testing focused on
8. EXT RK j o nN O U C D EF n H D iw is amp le 32010j 32014 ELECT 32017 PE S DLE APPEARANCE SELEC 320 F PBX ENABLE 3202 gzl nj rd w re UO Ei D D w zj T 32018 23 23 E 32031 END_ALL_CALLS_DISAB END_ALL_CALLS_ENABLE RANSFER_TO_COVERAGE RANSFER_ON_HANGUP HHUUOQOQNHN TH FE SUB_MENU_NAME More lt Voice Mail gt 39000 lt Conference Bridge gt SIP_PROFILE SIP_PROFILE_NAME TR SIP_DOMAIN business SIP_SERVER_IP_ADDR SIP_SERVER_PORT 506 SIP_USERNAME 30115 SIP_PASSWORD 123456 CM_PRINCIPLE 30115 SIP_PROFILE CTM Reviewed SPOC 10 15 2007 32030 32027 32026 Stuff 15553331234 15sip com 10 755767 0 Solution amp Interoperability Test Lab Application Notes 2007 Avaya Inc All Rights Reserved 21 of 22 oneXmobileAP8 2007 Avaya Inc All Rights Reserved Avaya and the Avaya Logo are trademarks of Avaya Inc All trademarks identified by and are registered trademarks or trademarks respectively of Avaya Inc All other trademarks are the property of their respective owners The information provided in these Application Notes is subject to change without notice The configurations technical data and rec
9. ation Ringing H 320 Conversion Service Link Mode Multimedia Mode MWI Served User Type Emergency Location Ext y n n Yg n y single n as needed enhanced qsig mwi Page STATION Auto Select Any Idle Appearance Coverage Msg Retrieval Auto Answer Data Restriction Idle Appearance Preference Bridged Idle Line Preference Restrict Last Appearance EMU Login Allowed Per Station CPN Send Calling Number Display Client Redirection Select Last Used Appearance Coverage After Forwarding Direct IP IP Audio Connections y Always Use n IP Audio Hairpinning n CTM Reviewed SPOC 10 15 2007 Solution amp Interoperability Test Lab Application Notes 2007 Avaya Inc All Rights Reserved 5 of 22 oneXmobileAP8 Step Description CTM Reviewed On Page 3 under BUTTON ASSIGNMENTS enter the number of call appr buttons that match the number of call appearances supported by Avaya one X Mobile In addition some features require the configuration of feature buttons for the feature to function This includes the two examples shown below No Hold Conference no hld cnf and Automatic Call Back auto cback add station 30115 SITE DATA Room Jack Cable Floor Building ABBREVIATED DIALING tends BUTTON ASSIGNMENTS 1 call appr 2 call appr 3 call appr 4 SPOC 10 15 2007 Page STATION Headset Speaker Mounting Cord Length Set Color no hld cnf
10. ed in Section 4 Step 1 Navigate to Users Registered Users Verify that the Avaya one X user name 30115 is registered with the IP address assigned to the Nokia phone in Section 6 Step 1 10 75 5 47 3 Verify that calls can be made to from Avaya one x Mobile to SIP and non SIP endpoints on the enterprise 4 Verify that inbound outbound calls can be made from Avaya one X Mobile and the PSTN 5 Verify that the Avaya one X Mobile telephony feature menus invoke the corresponding FNEs defined in the settings Ime file 6 Verify that calls to Avaya one X Mobile can cover to voicemail and that messages may be retrieved However a message waiting indicator MWI is not supported 8 Troubleshooting This section provides troubleshooting tips for common problems If the Avaya one X Mobile does not lock to the wireless access point verify that the Network Name SSID is configured the same on the Avaya one X Mobile and the Avaya AP 8 wireless access point If the problem persists the Avaya one X Mobile should be power cycled to ensure CTM Reviewed Solution amp Interoperability Test Lab Application Notes 19 of 22 SPOC 10 15 2007 2007 Avaya Inc All Rights Reserved oneXmobileAP8 that the device is using the correct settings from any recent changes It has also been observed that it may take a couple of minutes before the Avaya one X Mobile locks on to the access point Ifthe Avaya one X Mobile doe
11. ide Release 4 1 Doc 16 601939 Issue 1 April 2007 8 Avaya AP 8 User s Guide Release 2 5 2 October 2004 Product documentation for Avaya products may be found at http support avaya com CTM Reviewed Solution amp Interoperability Test Lab Application Notes 20 of 22 SPOC 10 15 2007 2007 Avaya Inc All Rights Reserved oneXmobileAP8 Appendix A Avaya one X Mobile Configuration File Included below is the Avaya one X Mobile configuration file settings Ime used during testing U PEECH ACCESS NUMBER DID PREFIX 41555789 INTERNATIONAL DIRECT DIAL PREFIX 011 NATIONAL DIRECT DIAL PREFIX 1 HOME COUNTRY DIAL CODE 1 ARS CODE 9 EXTENSION LENGTH 5 NATIONAL NUMBER LENGTH 10 USERS EMERGENCY NUMBERS 911 SETTINGS PIN 1234 ENBLOC DIALING 0 J CTIVE_APPEARANCE_SE ECT 32001 Kal TO CALL BACK TOGGL 32002 ALL FORWARDING ALL ACTIVATION 32004 ALL FORWARDING BUSY NO ANSWER ACTIVATION 32005 QAaQar rn G CALL_FORWARDING_DISAB CALLING_PARTY_NUMBE E 32006 CALLING PARTY NUMBER BLOCK UNBLOCK CALL PARK 32007 CALL PICKUP DIRECTED CALL PICKUP GROUP 3 320137 2009 ENDED 32008 ON ANSWER 1 PARTY U U CALL PICKUP GROUP
12. ileAP8 Step Description 4 A user must be added on Avaya SES for Avaya one X Mobile From the left pane navigate to Users gt Add Enter the values as shown below 2 Primary Handle Enter the extension for this user This should match the Phone Number shown used in the PVFMC mapping in Section 3 Step 4 Password Enter a valid password for logging into the SIP endpoint Confirm Password Re enter the password Host Select the Avaya SES server address from the pull down menu First Name Any descriptive name Last Name Any descriptive name Help Exit Top It Profile d Users Configuration ficate n Add User Primary Handle User ID Password Confirm Password Host First Name Last Name address 1 Address 2 Office City State Country Zip add Media Server Extension Check the Add Media Server Extension checkbox Click the Add button to proceed A confirmation window will appear Click Continue on this new page to proceed A Integrated Management SIP Server Management 30115 10 75 56 Otto Smith Fields marked are required CTM Reviewed SPOC 10 15 2007 Solution amp Interoperability Test Lab Application Notes 2007 Avaya Inc All Rights Reserved 10 of 22 oneXmobileAP8 Step Description The Add Media Server Extension page will appear In the Extension field enter the same extensio
13. interface properties below Note This page aliows configuration of a single SSID Wireless Network Name in order to configure more than one SSID please visit the SSID VLAN Security page Note Changes to these parameters except Wireless Service Status require access point reboot in order to take effect sical Interface Type M Transmit Rate Auto Fallback v DTIM Period 1 255 1 RTS CTS Medium Reservation 234 7 off 2347 Enable Closed System Fj Wireless Service Status Resume ma kilis Wireless Distribution System WDS WDS can be used to establish point to point i e wireless backhaul connections with other access points This table is used to configure WDS partner access points 1 6 Configure Avaya one X Mobile This section covers the configuration of Avaya one X Mobile Some of the following steps are order dependent Care should be taken to perform these steps in the order shown In addition even if the phone is to be used only as a WiFi phone a SIM card must be installed for proper configuration and operation A SIM card is provided by the cellular service provider when cellular service is purchased CTM Reviewed SPOC 10 15 2007 Solution amp Interoperability Test Lab Application Notes 2007 Avaya Inc All Rights Reserved oneXmobileAP8 14 of 22 Step Description 1 Configure a WLAN access point profile on the Nokia phone To create and configure a
14. me Password 123456 Avaya SES user password Allow loose routing Yes default Transport type TCP Port 5060 000 oo O Oo 000 090 CTM Reviewed Solution amp Interoperability Test Lab Application Notes 17 of 22 SPOC 10 15 2007 2007 Avaya Inc All Rights Reserved oneXmobileAP8 Step Description 5 Configure an Internet telephone settings profile on the Nokia phone To create and configure a new profile perform the following Press the Menu button Navigate to Tools gt Settings gt Connection Internet tel settings Select the Options soft button and navigate to New profile The example below shows the Internet telephone settings used for testing Name Internet This name will appear in the list of Internet telephone settings profiles to identify the profile SIP profiles TR15sip This value must be the name of the SIP profile that was created in Step 3 or 4 Click the Back soft button to exit the Internet telephone settings profile 6 Set the Default Call Type to Internet SIP To set this parameter perform the following Press the Menu button Navigate to Tools gt Settings gt Call The example below shows call settings used for testing Default values can be used for all other fields Internet call waiting Activated Internal call alert on Default call type Internet Click the Back soft button to exit the call settings 7 Set the Dual Mode Network Mode To set this para
15. meter perform the following Start Avaya one X Mobile Press the Menu soft button Navigate to Settings Options and enter the PIN number to access these functions Click the OK soft button Select the General tab along the top of the display Set the Mode parameter to WiFi 1 Click the Back soft button to exit Settings gt Options menu CTM Reviewed Solution amp Interoperability Test Lab Application Notes 18 of 22 SPOC 10 15 2007 2007 Avaya Inc All Rights Reserved oneXmobileAP8 7 Verification Steps The following steps may be used to verify the configuration Step Description 1 Verify that the Avaya one X Mobile had acquired the wireless access point This is indicated by an icon in the upper right corner of the display comprised of four connected squares If the squares are filled in solid then the device has locked on to the access point If the squares are not filled in open then the device is not locked on 2 Verify that the Avaya one X Mobile has registered with Avaya SES To verify the current registration state on the Avaya one X Mobile Press the Menu button on the Nokia phone Navigate to Tools Settings gt Connection gt SIP settings A list of profiles is shown with the current registration state Verify that the profile created in Step 3 or 4 is shown as Registered To verify the registration on Avaya SES Log in to the Avaya SES web administration interface as describ
16. n used in the previous step In the Media Server field select from the pull down menu the name of the media server mentioned in Step 3 Click the Add button to complete the operation Extension Media Server Default Profile Registered Users Integrated Management F SIP Server Management m Add Media Server Extension Add Media Server extension for user 30115 30115 CMeast Fields marked are required I lt CTM Reviewed SPOC 10 15 2007 Solution amp Interoperability Test Lab Application Notes 2007 Avaya Inc All Rights Reserved 11 of 22 oneXmobileAP8 5 Configure Avaya AP 8 This section covers the configuration of the Avaya AP 8 wireless access point It assumes the Avaya AP 8 has been initially configured with and IP address using the ScanTool utility After which the Avaya AP 8 is configured via an Internet browser For details on the use of the ScanTool utility see 8 Step Description 1 Access the Avaya AP 8 web interface by entering http ip addr as the URL in an Internet browser where ip addr is the IP address of the Avaya AP 8 Log in with the appropriate credentials The main page will appear as shown below Avaya AP 8 v2 5 2 894 SN 06UT07570198 System Status v3 1 0 IP Address 10 75 5 13 ContactName Contact Name System Name AVvaVv2 AP 3 Se 75 6F ContactPhone Contact Phone Number System Location System Location Contact Email
17. nage Users Add and delete Users Manage Conferencing Add and delete Conference Extensions Manage Media Server Add and delete Media Server Extensions Extensions Manage Emergency Add and delete Emergency Contacts Contacts onfiguration Manage Hosts Add and delete Hosts Certificate Management Manage Media Add and delete Media Servers Servers Manage Adjunct Add and delete Adjunct Systems Systems Manage Services Start and stop server processes on this host As part of the Avaya SES installation and initial configuration procedures the following parameters were defined Although these procedures are out of the scope of these Application Notes the values used in the compliance test are shown below for reference After each parameter is a brief description of how to view the value from the Avaya SES administration home page shown in the previous step e SIP Domain business com To view navigate to Server Configuration gt System Parameters e Host SES IP address 10 75 5 6 To view navigate to Host List Click Edit e Media Server Avaya Communication Manager Interface Name CMeast To view navigate to Media Server List Click Edit e SIP Trunk IP Address Avaya S8300 Server IP address 10 75 5 2 To view navigate to Media Server List Click Edit CTM Reviewed Solution amp Interoperability Test Lab Application Notes 9 of 22 SPOC 10 15 2007 2007 Avaya Inc All Rights Reserved oneXmob
18. nsion be created on Avaya SES The procedure below shows the configuration necessary for the Avaya one X Mobile However the procedure is the same for any SIP endpoint Step Description 1 Access the Avaya SES administration web interface by entering http lt ip addr gt admin as the URL in an Internet browser where lt ip addr gt is the IP address of the Avaya SES server Log in with the appropriate credentials and then select the Launch Administration Web Interface link from the main page as shown below Integrated Management Standard Management Solutions Help Log Off Administration The Administration Web Interface Launch Administration Web allows you to administer this SES Interface Server Maintenance The Maintenance Web Interface Launch Maintenance Web allows you to maintain Interface troubleshoot and configure this SES server CTM Reviewed Solution amp Interoperability Test Lab Application Notes 8 of 22 SPOC 10 15 2007 2007 Avaya Inc All Rights Reserved oneXmobileAP8 Step Description The Avaya SES Top page will be displayed as shown below If any changes are made within Avaya SES an Update link appears in the bottom of the blue navigation bar on the left side of the Avaya SES administration pages It is necessary to click this link to commit the pending changes to the database Integrated Management SIP Server Management Server 10 75 5 6 Top Ma
19. ommendations provided in these Application Notes are believed to be accurate and dependable but are presented without express or implied warranty Users are responsible for their application of any products specified in these Application Notes Please e mail any questions or comments pertaining to these Application Notes along with the full title name and filename located in the lower right corner directly to the Avaya Solution amp Interoperability Test Lab at interoplabnotes list avaya com CTM Reviewed Solution amp Interoperability Test Lab Application Notes 22 of 22 SPOC 10 15 2007 2007 Avaya Inc All Rights Reserved oneXmobileAP8
20. parameters require access point reboot in order to take effect IP Address Assignment Type IP Address 4075543 Subnet Mask 255 255 255 0 Gateway IP Address 107551 Enable DNS Client El DNS Primary Server IP Address 0 0 0 0 DNS Secondary Server IP Address 0 0 0 0 DNS Client Default Domain Name Default TTL Time To Live 64 OK CTM Reviewed SPOC 10 15 2007 Solution amp Interoperability Test Lab Application Notes 13 of 22 2007 Avaya Inc All Rights Reserved oneXmobileAP8 Step Description The Avaya AP 8 can support two wireless networks Wireless A 802 11a or Wireless B 802 11bg Avaya one X Mobile will use the Wireless B network A Network Name or SSID must be defined for this network To do this select the Configure button in the left pane Navigate to the Interfaces gt Wireless B tab Enter a text string in the Network Name SSID field Default values can be used for all other fields AVAYA Status Configure Monitor Commands Help Exit Alarms 1 Bridge 1 Qos 1 RADIUS Profiles 1 S8IDMLAN Securiy Ip System Network Interfaces 1 Management 1 Filtering Operational Mode Wireless A Wireless B 1 Ethernet X Wireless interface properties determine the characteristics of the wireless medium as well as how wireless clients will communicate with the access point Verify configuration of the desired operational mode prior to configuring the wireless
21. ping to the number of WiFi call appearances supported on the Avaya one X Mobile same as used in Step 3 Set the Call Limit of the PBFMC mapping to the number of cellular call appearances supported on the Avaya one X Mobile This may be different than the number supported for WiFi Verify that the Mapping Mode is set to both add off pbx telephone station mapping 30115 STATIONS WITH OFF PBX TELEPHONE INTEGRATION Station Call Mapping Calls Bridged Extension Limit Mode Allowed CEES 2015 3 both all both SORS 2 both all both CTM Reviewed Solution amp Interoperability Test Lab Application Notes 7 of 22 SPOC 10 15 2007 2007 Avaya Inc All Rights Reserved oneXmobileAP8 4 Configure Avaya SES This section covers the configuration of Avaya SES Avaya SES is configured via an Internet browser using the administration web interface It is assumed that the Avaya SES software and the license file have already been installed on the server During the software installation an installation script is run from the Linux shell of the server to specify the IP network properties of the server along with other parameters In addition it is assumed that the Setup screens of the administration web interface have been used to initially configure Avaya SES For additional information on these installation tasks refer to 5 Avaya SES was configured as a combined home edge server Each SIP endpoint used in the testing required that a user and media server exte
22. s not register with the Avaya SES verify the SIP settings on the Avaya one X Mobile Section 6 Step 3 or 4 with the corresponding settings on the Avaya SES In particular verify the Proxy server address Registrar serv addr Realm User name and Password If the problem persists use a LAN sniffer or Avaya SES traces to determine the reason for the registration failure 9 Conclusion These Application Notes describe the procedures required to configure Avaya one X Mobile to operate as a WiFi SIP endpoint using the Avaya AP 8 wireless access point with Avaya SIP Enablement Services and Avaya Communication Manager 10 Additional References 1 Feature Description and Implementation For Avaya Communication Manager Doc 555 245 205 Issue 5 0 February 2007 2 Administrator Guide for Avaya Communication Manager Doc 03 300509 Issue 3 1 February 2007 3 SIP support in Avaya Communication Manager Running on the Avaya 8300 S8400 S8500 Series and S8700 Series Media Server Doc 555 245 206 Issue 6 1 March 2007 4 Avaya Extension to Cellular and Off PBX Station OPS Installation and Administration Guide Release 3 0 version 6 0 Doc 210 100 500 Issue 9 June 2005 5 Installing and Administering SIP Enablement Services Doc 03 600768 Issue 4 May 2007 6 Avaya IA 770 INTUITY AUDIX Messaging Application Doc 11 300532 May 2005 7 Avaya one X Mobile for S60 3 Edition Dual Mode Installation and Administration Gu
23. teroperability Test Lab Application Notes 4 of 22 SPOC 10 15 2007 2007 Avaya Inc All Rights Reserved oneXmobileAP8 Step Description Create a station on Avaya Communication Manager to be used by Avaya one X Mobile To do this use the add station n command where n is an unused extension to be added Set the Type field to 4620 Enter an X in the Port field This indicates a station is being added without identifying a physical port for the station to use Enter a descriptive name in the Name field The default values may be retained for all other fields add station 30115 Extension 30115 Type 4620 Port X Name Otto STATION OPTIONS Loss Group Speakerphone Display Language Survivable GK Node Name Survivable COR Survivable Trunk Dest a 2 way english internal y STATION Lock Messages n Security Code Coverage Path 1 1 Coverage Path 2 dunes bo Station Time of Day Lock Table Personalized Ringing Pattern 1 Message Lamp Ext 30115 Mute Button Enabled y Expansion Module n Media Complex Ext IP SoftPhone n Customizable Labels y On Page 2 set the Restrict Last Appearance field ton This will allow the last call appearance to be available for both incoming and outgoing calls add Sslavion SOULS FEATURE OPTIONS LWC Reception LWC Activation LWC Log External Calls CDR Privacy Redirect Notification Per Button Ring Control Bridged Call Alerting Active St
24. tly via the Nokia Tools gt Settings menus To create a SIP profile from the Avaya one X Mobile menus The example below shows the SIP profile settings used for testing Default values can be used for all other fields Start Avaya one X Mobile Click the Menu soft button Navigate to Settings Options and enter the PIN number to access these functions Click the OK soft button Select the WiFi tab along the top of the display Click the Menu soft button and select Create New Profile Enter a unique name for this profile Click the OK soft button This profile will now appear in a list of profiles and will contain default values The profile can be modified by highlighting the profile name clicking the Options soft button and selecting Edit Profile Name TR15sip Service Profile IETF default Default access point TestRm15 This is the WLAN access point created in Step 1 Public user name sip 30115 business com Use compression No default Registration Always On Use security No default Proxy Server o Proxy server address sip 10 75 5 6 The IP address of Avaya SES Realm business com The SIP domain of Avaya SES User name 30115 Avaya SES user name Password 123456 Avaya SES user password Allow loose routing Yes default Transport type TCP o Port 5060 Registrar Server o Registrar serv addr sip 10 75 5 6 The IP address of Avaya SES Realm business com The SIP domain of Avaya SES User name 30115 Avaya SES user na
25. tware is available from http www nokia co uk Install the Avaya one X Mobile software on the Nokia phone using the Nokia PC Suite software For more information on installing Avaya one X Mobile refer to 7 CTM Reviewed Solution amp Interoperability Test Lab Application Notes 15 of 22 SPOC 10 15 2007 2007 Avaya Inc All Rights Reserved oneXmobileAP8 Step Description Create and download an Avaya one X Mobile configuration file with the name settings Ime This file contains parameters relating to the dialing plan SIP profile and feature name extensions FNEs that are mapped to Avaya one X Mobile feature menus The file is downloaded to the Nokia phone using the Nokia PC Suite software For more details on file syntax available parameters and download procedures see 7 The complete configuration file used for testing is shown in Appendix A All parameter values defined in the configuration file must match the corresponding values on Avaya Communication Manager and or Avaya SES The values shown below were used for testing A value must be assigned to the following parameters in the configuration file DID PREFIX 1555789 INTERNATIONAL DIRECT DIAL PREFIX 011 NATIONAL DIRECT DIAL PREFIX 1 HOME COUNTRY DIAL CODE 1 ARS CODE 9 EXTENSION LENGTH 5 NATIONAL NUMBER LENGTH 10 USERS EMERGENCY NUMBERS 911 SETTINGS PIN 1234
26. vaya one X Desktop Edition 2 1 SP1 Build 70 Windows XP Professional Avaya 6408D Digital Telephone Avaya 6210 Analog Telephone Analog Telephone x Windows PC TFTP Server Windows XP Professional Table 1 Equipment Used 3 Configure Avaya Communication Manager This section describes the Avaya Communication Manager configuration It assumes the procedures necessary to support SIP have been performed as described in 3 This includes the configuration of a SIP trunk to Avaya SES It also assumes that an off PBX station OPS has been configured on Avaya Communication Manager for each SIP endpoint in the configuration other than the Avaya one X Mobile endpoint as described in 3 and 4 This section will describe the configuration of the off PBX station on Avaya Communication Manager associated with the Avaya one X Mobile The configuration of Avaya Communication Manager was performed using the System Access Terminal SAT After the completion of the configuration in this section perform a save translation command to make the changes permanent The testing used a single IP region which contained the Avaya S8300 Server Avaya SES and all the IP endpoints Direct IP IP audio also known as media shuffling was enabled for both inter region and intra region calls The authoritative domain was set to business com The codec set chosen for this region contained G 711MU and G 729AB CTM Reviewed Solution amp In
Download Pdf Manuals
Related Search