Audiovox VOH1042 DL User's Manual
Contents
1. AUDIOVOX ELECTRONICS CORP N 7 VOH1042 DL 10 4 LCD OVERHEAD TV MONITOR OWNER S MANUAL IMPORTANT NOTICE It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a television viewer or screen that is located in the motor vehicle at anv point forward of the back of the driver s seat or that is visible directly or indirectly to the driver while operating the vehicle In the interest of safety the VOH1042 DL should never be installed where it will be visible directiv or indirectiv bv the operator of the motor vehicle 2 210 1 Congratulations on vour purchase of the Audiovox VOH1042 DL drop down TV Video Monitor The VOH1042 DL has been designed to give vou and vour familv manv vears of video entertainment in the mobile environment Please read the directions that follow to familiarize vourself with the product and to ensure that you obtain the best results from your equipment NOTE Installation options varv See the individual Owner s Manuals for each component in vour svstem to obtain a full understanding of each component s operation SAFETV PRECAUTION For safetv reasons when changing Video Media it is recommended that the vehicle is not in motion and that vou do not allow children to unfasten seat belts to change Video Media or make adjustments to the system System adjustments can be accomplished using the Remo2. Slides in the direction of the arrow to release the drop down screen 4 TVIAV video equipment connected to the AUDIO VIDEO inputs can be used with the TV by pressing this button Each time the button is pressed the Audio Video source will change in the following sequence VIDEO 1 VIDEO 2 and TV Volume Up Down Controls Volume to Headphone Jacks and external Speakers if connected Also used to adjust the picture control setting when contrast bright color or tint is displayed the screen Infrared Transmitter Used to transmit audio to Wireless Headphones Picture Select Each time this button is pressed the screen picture adjustment display cycles through adjustment bars for CONTRAST BRIGHTNESS COLOR and TINT Once the desired adjustment bar is displayed use the VOLUME UP DOWN buttons to adjust the setting The display will automatically turn off if no adjustments are made within 6 seconds or if any other button is depressed Dome Lights Provide additional illumination REMOTE CONTROL OPERATION BATTERV INSTALLATION Before attempting to operate the Remote Control install the batteries as described below 1 Turn the Remote Control face down Press down on the ridged area of the batterv cover and GOO slide it off 2 Install Two batteries as shown Make sure that proper polaritv 1 observed 3 Slide
3. the factory serial number bar code label s THE EXTENT OF THE COMPANY S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND IN NO EVENT SHALL THE COMPANY S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT This Warranty is in lieu of all other express warranties or liabilities ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 48 MONTHS FROM DATE OF ORIGINAL PURCHASE IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY EXPRESS OR IMPLIED WHATSOEVER No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you This Warranty gives you specific legal rights and you may also have other rights which vary from state to state U S A AUDIOVOX ELECTRONICS CORPORATION 150 MARCUS BLVD HAUPPAUGE NEW YORK 11788 1 800 645 4994 CANADA CALL 1 800 645 4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA Copyrigh
4. H BUTTON This button selects between SKIP and SEARCH mode In SKIP mode the TV only stops on channels that are programmed into memory when the CHANNEL UP DOWN buttons are used When the SKIP mode is turned off the TV will stop on all active channels 10 ERASE WRITE BUTTON When tuned to a channel press this button to store or erase the channel from memory The stored channel numbers are displayed in GREEN on the screen and the erased channels are in When skip mode is on the VOH1042 DL will tune to only the stored channels when using the CHANNEL UP DOWN buttons REMOTE CONTROLLED VCP FUNCTIONS These features can only be used with an Audiovox Video Tape Player if this option was installed with your video package For more information consult the Audiovox VCP Owner s Manual 11 POWER BUTTON This button is used to turn the VCP on and off 12 REW REWIND BUTTON If this button is pushed while the tape is stopped the Video Tape will rewind If this button is pushed while the tape is playing the VCP will go into rewind search mode 13 PLAY BUTTON Press this button to activate play mode while a Video Tape is loaded into the VCP This button may also be used to disengage search and pause modes 14 FFWD FAST FORWARD BUTTON If this button is pushed while the tape is stopped Video Tape will fast forward If this button is pressed while the Video Tape is playing the VCP will go into fast forward s
5. L Grey PIN 10 Video Out Yellow PIN 11 Video GND Black PIN 12 Line Out R Red PIN 13 Power 12V FM Trans Red PIN 14 Power GND FM Trans Black PIN 15 Audio L Out FM Trans White PIN 16 Audio GND FM Trans Black PIN 17 Audio R Out FM Trars Red PIN 18 Line Out GND Black Troubleshooting PROBLEM SOLUTION Poor TV Reception Poor radio reception FM modulator installed IR sensor inoperative Perform auto programming of the tuner Verifv antenna condition NOTE Due to the nature of TV signals vehicle motion direction the vehicle is facing distance from the transmitter nearby surroundings weather may adversely affect TV reception These conditions may result in the following picture roll snowy picture or momentary loss of color Please refer to page 2 for more information on TV reception Check the condition of the vehicle s radio antenna Verify that the antenna is fully raised If a wired RF modulator has been installed verify that it s switch is turned to the off position Verify that the batteries in the remote are fresh Verify that the remote eye is not obstructed Verify that the infrared transmitter is affixed over the sensor eye of the component to be controlled 13 Specifications LCD Brightness Resolution SVGA Operation Temperature Storage Temperature Vi
6. deo Displav Svstem Audio Output Current Draw Weight Overall Dimensions 300 nits min 800 x 600 10 65 40 85 NTSC 1W 160 2 5 3 Lbs 2 2 x 11 x 11 2 Inch H x W x D 36 MONTH LIMITED WARRANTV Applies to Audiovox Mobile Video Products AUDIOVOX ELECTRONICS CORP the Company warrants to the original retail purchaser of this product that should this product or any part thereof under normal use and conditions be proven defective in material or workmanship within 36 months from the date of original purchase such defect s will be repaired or replaced with reconditioned product at the Company s option without charge for parts and repair labor To obtain repair or replacement within the terms of this Warranty the product is to be delivered with proof of warranty coverage e g dated bill of sale specification of defect s transportation prepaid to the Company at the address shown below This Warranty does not extend to the elimination of externally generated static or noise to correction of antenna problems to costs incurred for installation removal or reinstallation of the product or to damage to tapes discs speakers accessories or vehicle electrical systems This Warranty does not apply to any product or part thereof which in the opinion of the Company has suffered or been damaged through alteration improper installation mishandling misuse neglect accident or by removal or defacement of
7. earch mode 15 REPLAY BUTTON Pressing this button will rewind the Video Tape and immediately begin playback when the Video Tape is fully rewound 16 STOP BUTTON Press this button to stop the Video Tape iT CHANNEL TUNING SETUP In order to easilv access all available channels it mav be necessarv to perform the channel Auto Programming procedure whenever the vehicle s geographic location has changed i e citv to citv weak signal area 1 Press the AUTO MEMORY button on the remote control unit or the AUTO PROGRAM AP button on the flip down video unit You will see the TV cycle through all the channels The built in microprocessor will automatically store each channel that is actively broadcasting in your area A To tune only strong clear channels with the CHANNEL UP DOWN buttons press the SKIP SEARCH button on the Remote Control Unit until SKIP MODE is displayed on the bottom of the screen The TV will now tune only to channels that are stored in memory when the UP or DOWN buttons are used on the monitor or the remote control B To tune to weak or marginal channels with the CHANNEL UP DOWN buttons press the SKIP SEARCH button on the Remote Control Unit until SKIP OFF is displayed on the bottom of the screen The TV will tune to all active channels when using the CHANNEL UP DOWN buttons or you can go directly to the channel by using the 0 9 buttons on the Remote Control 2 To ERASE a cha
8. may be equipped with an auxiliary A V stereo input connector optional These inputs are provided to facilitate the temporary connection of optional audio video equipment such as a camcorder or video game system To play a source with these inputs an RCA patch cord is required to connect the audio video signals to their respective jacks Mono audio sources will require the use of an RCA Y cable P N 0892165 to connect to both right and left inputs if patch cords are installed into the AUX inputs the VIDEO INPUT 2 will be temporarily bypassed Once the connections have been made turn the VOH1042 DL on and press the source button on the VOH1042 DL or the TV Video button on the remote control until Video 2 is displayed on the screen The unit will now play the audio and video signals from the accessory connected The remote control will not operate the accessory components VOH1042 DL Jack Panel HEADPHONES AUDIOR AUDIOL VIDEO HEADPHONES 10 WIRED FM MODULATOR P N FMM100 Vour video svstem mav be equipped with an optional RF modulator that allows vou to listen to the VOH1042 DL s audio signal by tuning your vehicle s radio to the selected frequency 88 7 or 89 1 check with your installer and tuning on the remote mounted RF modulator switch In most cases this toggle switch will be located underneath the driver s side of the dash check with your installer for the exact location Whenever the RF Modulator is ON b
9. me Light 9 REMOTE INFRARED SENSOR REPEATER The VOH1042 DL incorporates an Infrared Sensor which relays the signals from the Remote Control to allow the VOH1042 DL to be controlled simply by pointing its Remote Control at the remote sensor This provides control of auxiliary equipment such as an Audiovox VCP or DVD Player The Remote Infrared Sensor can relay signals from most manufacturers Remote Control to its respective component connected to the Video 1 and 2 inputs In this case you must use the Remote Control supplied with the other manufacturers component Remote Infrared Sensor OPTIONAL ACCESSORIES WIRELESS HEADPHONES The VOH1042 DL includes a built in Infrared Transmitter for use with Audiovox Wireless Headphones P N MVIRHS Turning the Headphone switch ON will activate the internal IR Receiver the volume can then be adjusted using the controls on each headset Anv number of wireless headphones can be used but all must be within a line of sight from the transmitter as infrared transmissions like visible light travel only in a straight line The VOH1042 DL has a Jack labeled to FM Transmitter this Jack is for connection of an optional Audiovox RF Transmitter P N WTXRFO1 This Transmitter is for use with the Audiovox Wireless RF Headphones P N WHPRFOT Consult the documentation accompanying the Audiovox Wireless Headphones for more information AUXILIARY A V STEREO INPUTS JACK The VOH1042 DL
10. nnel press the ERASE WRITE button on the Remote Control Unit until MANUAL MEMORY XX ERASE is displayed on screen To STORE a channel press the button until the MANUAL MEMORY XX ADD is displayed on screen TURNING THE VOH1042 DL ON AND OFF 1 Sliding the screen release lock forward will unlock the screen and it will drop down slightly Pivot the screen downward until a comfortable viewing angle is reached After the unit has been turned on and is displaying a picture adjustment to the viewing angle can be made by pivoting the screen to optimize the picture quality The internal friction detent will hold the screen in position while the system is in use 2 Pressing the power button on the pod or remote will alternately turn the system on or off When in use the internal back lighting will illuminate the controls 3 Remember to turn the unit off and pivot the display screen to the locked position when not in use 8 OPERATION OVERHEAD DOME LIGHTS A three position slide switch controls the Dome Lights on the VOH1042 DL Sliding the switch to the ON position will turn the Dome Lights ON The OFF position will prevent the Dome Lights from turning ON at all times and the auto position will allow the Dome Lights to turn ON and OFF with the vehicle s interior lighting Do not leave the vehicle unattended with the Dome Lights switch in the ON position as this could result in a discharged batterv Dome Light Dome Light Switch Do
11. roadcast radio reception will be poor Turning the remote mounted toggle switch OFF will allow for normal radio reception VIDEO OUTPUT The VOH1042 DL provides a video output for an optional Video monitor s This output will provide a video signal that duplicates the signal displayed by the VOH1042 DL to an additional Monitor or Video display Please see your installer for more information 11 TYPICAL SYSTEM CONNECTIONS IR Transmitter LED Accessor Harness 2 PIN IR Connector gt 4 PIN Power Connector i S Anten na Negative Dome Light Switching Lamp Auto Purple Brown Constant 12V Black Red Lamp ON Red Black Positive Dome Light Switching Lamp Auto Purple Brown Ground Black Red 12Vdc Red Black Yellow RCA Video White RCA Audio Left TE Red RCA Audio Right 12 PIN 1 Power Red PIN 2 Power GND Black PIN 3 Dome Light ON Red Black PIN 4 Lamp Common Black Red PIN 5 Dome Light Auto Purple Brown PIN 6 Line Out L White PIN 7 Spk Out R Green PIN 8 Spk Out GND Black PIN 9 Spk Out
12. s headphones or a wired RF modulator When using these devices the volume must be adjusted with the headphone volume control or with your radio s volume control See page 10 Headphones or page 11 Wired FM Modulator PICTURE SELECT BUTTON Each time this button is pressed the screen picture adjustment display cycles through adjustment bars for CONTRAST BRIGHTNESS COLOR and TINT Once the desired adjustment bar is displayed use the VOLUME UP DOWN buttons to adjust the setting The display will automatically turn off if no adjustments are made within 6 seconds or if any other button is depressed MUTE BUTTON Press this button to shut off the sound to the Wired Headphones and External Speakers if installed The screen will display the volume adjustment bar for 6 seconds indicating that the sound has been turned off Pressing the button again restores sound to the previously set level The mute feature may also be released by pressing the VOLUME UP DOWN buttons 7 TV VIDEO BUTTON 263 video equipment connected the AUDIO VIDEO inputs can be used with the TV by pressing this button Each time the button is pressed the Audio Video source will change in the following sequence VIDEO1 VIDEOZ and TV 8 AUTO BUTTON When the AUTO MEMORY BUTTON is depressed all channels in TV mode are searched and all channels with strong signals detected automatically stored 9 SKIP SEARC
13. t 2002 Audiovox Electronics Corp 150 Marcus Blvd Hauppauge NY 11788 For Customer Service Visit Our Website At www audiovox com Product Information Photos FAQ s Owner s Manuals 2002 Audiovox Electronics Corp Hauppauge NV 11788 128 6331
14. te Control while seat belts remain fastened Enjoy your Audiovox entertainment system but remember safety of all passengers remains the number one priority 205 FEATURES 10 4 TFT Thin Film Transistor Active Matrix LCD Liquid Crvstal Displav Monitor OSD On Screen Displav For Control Of Picture Qualitv And Functions Full Function Remote Control Television Tuner Remote Sensor Eve Three Audio Video Sources Speaker Amplifier Back Lit Controls For Low Light Operation Infrared Wireless Headphone Transmitter Dual Dome Lights Optional Jack for RF Transmitter for the Wireless RF Headphones FRONT PANEL FEATURE Figure 1 3 FRONT PANEL FEATURES See Figure 1 1 Power Button Bright red when svstem is ON dim when svstem is OFF Channel Up Down Changes the TV channel Muto Program Switch AP Auto Program used to program local channels into TV memorv Press when vehicle is in a new location Sensor Eve Allows the remote control to operate the VOH802 DL s OSD svstem On Screen Displav volume to Wired Headphone Jacks and optional external speakers and for control of Video Media Plaver and other accessories Three Position Dome Light Switch e Auto Automaticallv switched on the dome lights conjunction with the vehicles interior illumination e Off The Dome lights will not turn on in this position e Turns on the Dome lights Screen release
15. the cover back until it clicks into position 8 SE AUTO ERA SKIP SEARCH WRITE MEMORY v VOLUME The Remote Control will operate the VOH1042 DL Audiovox Televisions and Video Media Players It is 10 not a universal remote control and will not control ey equipment from other manufacturers f a universal Remote Control is used with the VOH1042 DL choose the remote control encoding scheme for Audiovox Televisions when programming the remote REMOTE CONTROLLED TV FUNCTIONS POWER ON OFF Press this button to turn the VOH1042 DL on The channel number or current video source will be displaved on screen and the picture will appear in a few seconds Press the button again to turn the VOH1042 DL off DIRECT ACCESS 0 9 BUTTONS Use these buttons to make a direct channel selection The channel number chosen will be displayed on the screen for about 4 seconds The direct access is carried out with 0 9 keys 0 99 The 1__ key will not function as it is only used for cable channels above 99 CHANNEL UP DOWN BUTTONS Use these buttons to advance to the next higher or lower channel See also SKIP SEARCH BUTTON VOLUME UP DOWN BUTTONS Use these buttons to raise or lower the volume level of the Wired Headphones or External Speakers if installed They are also used to make adjustments in the picture select mode NOTE These buttons will not affect the volume of wireles
Download Pdf Manuals
Related Search