Audiovox ACA600 Installation Manual
Contents
1. Audiovox ACA600 Rear View Camera When Installed correctly this camera will automatically turn on when your vehicle is placed in the reverse gear setting There are no options or user settings on this camera Please refer to your Monitor owners manual for viewing instructions Reference position Questions Audiovox Tech Support 1 800 323 4815 All specifications and documents are subject to change at any time Audiovox is in no way responsible for damage incurred due to incorrect installation or improper use Rearview cameras are designed to aid and assist drivers it is your responsibility to check and double check your surroundings before moving your vehicle Always use due care when operating a motor vehicle Installation H 6m Yellow Video Out D Il q I Camera SS Black Red Ground 12v 12v Positive Yellow socket is connected to video Power socket is connected to DC 12V Monitor Professional Installation Is Recommended This camera is designed to be mounted at the rear of the vehicle Find a location that will not obstruct any equipment on your vehicle and will allow you to safely route the power video cable into the vehicle Use caution to not block or obstruct airbags or any safety device All connections should be made inside the vehicle as the power and video connections are not waterproof Always check2. OD OF 24 MONTHS FROM THE DATE OF ORIGINAL PURCHASE IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product The company does not warrant that this product cannot be compromised or circumvented THE EXTENT OF THE COMPANY S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND IN NO EVENT SHALL THE COMPANY S LIABILITY EXCEED THE PURCHASE PRICE PAID BY Audiovox Electronics Corporation 150 Marcus Blvd Hauppauge New York 11788 1 800 645 4994 128 7075C
3. s to the original retail purchaser of this product that should this product or any part thereof other than transmitters under normal use and conditions be proven defective in material or workmanship within 12 months from the date of original purchase such defect s will be repaired or replaced with new or reconditioned product at the Company s option without charge for parts or repair labor To obtain repair or replacement within the terms of this Warranty the product is to be delivered with proof of warranty coverage e g dated bill of sale specification of defect s transportation prepaid to an approved warranty station This Warranty is not assignable or transferable This Warranty does not cover damage to the vehicle s electrical system or costs incurred for removal or reinstallation of the product This Warranty does not cover batteries nor apply to any product or part thereof which in the opinion of the Company has suffered or been damaged through alteration improper installation mishandling misuse abuse neglect accident or by removal or defacement of the factory serial number bar code label s This Warranty is in lieu of all other express warranties or liabilities ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERI
4. twice before drilling a hole or screwing into something to insure there is nothing behind that surface Connect the RED power cable to the 12 Volt Positive wire from your White Reverse Lamp Connect the Black power cable to a 12 Volt Ground Example a screw or bolt Connect the video output yellow connection to the included extension cable and route the cable to the front of the vehicle Connect this to your Monitor s rear view camera input Adjust the camera angle direction to optimize your view on your monitor and tighten the mounting screws Specifications When using the flush Mount method Image sensor ov7740 always double check to make sure you do not hit anything behind your mounting System PAL NTSC surface The drill bit included is designed Effective Pixels 656 x 488 for plastic bumpers and trim panels If you will be mounting this in Metal you Resolution 420 TV lines will need a metal hole saw NOT Viewing Angle 135 Degree INCLUDED Use a16 5mm metal cutting LUX lt 1 0 Lux hole saw if needed It is always a good Power Supply DC12V idea to cover or protect the area around Operating Tem 506 4700 your mounting location with masking p o EMR IS tape before drilling IP Rating IP67 Size 170 130 mm Material Both side coated paper 127g QQ AUDIOVOX 12 MONTH LIMITED WARRANTY Applies to Audiovox Series Control Modules and Sensors AUDIOVOX Electronics Corporation the Company warrant
Download Pdf Manuals
Related Search