ATD Tools Patio Umbrella 4 User's Manual
Contents
1. Pump Suitable for use with oil based fluids heating oils motor oils diesel oil kerosene heavy amp light oils Warning The pump is constructed using plated steel components It should never be used to transfer fluids that may cause the pump to rust Never use this pump with water based fluids solvents acid antifreeze Certain fluids have a tendancy to build a coating on the surface when dry it is recommended to leave the lever handle in upright position when not in use2. ATD 5007 Lever Action Barrel Pump LBP 04 BU DESCRIPTION e Oil Pump for use with oil based fluids heating oils motor oils heavy amp light oils Diesel amp Kerosene e Premium powder coated steel pump body with ribbed section aluminum die cast pump head for maximum strength e Built in 1 1 2 amp 2 bung for use on drums with either openings e Wear resistant Brass piston rings fitted onto zinc die cast piston e Non return seal is NBR rubber e Comes complete with curved metal spout amp telescopic suction tube for use on 15 gallon 50 litres 55 gallons 205 litre barrels SPECIFICATIONS Mechanism Discharge Rate Wetted Components Bung Pump Inlet Fits Max temperature Plunger Rod Lever Handle with Rubber Grip Discharge Spout iN Aluminum Die Cast Head Barrel Telescopic Suction Tube 15 55 Gal 50 205 Litre barrels 60 C 140 F PUMP CONSTITUENTS ITEM NO PART DESCRIPTION QUANTITY Pump Assembly Pump Head fitted with Suction Tube amp Plunger Rod i 3 Lever Handle PRODUCT DETAIL PACKAGING PACKAGING INNER MASTER CARTON Net Weight 0 064 25 kg Power Cord Country of Product Certification Date Code Product Warnings Warning Origin Warranty Factory Code N A India 12 Months N A N A Recommended use for dispensing oil based fluids heating oils motor oils heavy amp light oils Diesel amp Kerosene Do NOT use this p
3. iminate possibility of leakage Note Ensure rubber gasket is positioned properly in spout nut before attaching the spout 3 Extend the telescopic suction pipe little longer than the height of the drum Note The telescopic suction tube will automatically adjust to the proper position 4 Screw the pump into the drum s bung Tighten the pump assembly securely by grasping the pump body and rotating Note Do not tighten the barrel by holding the lever handle 5 Pull the plunger rod of piston sub assembly up and attach the lever handle to the piston rod using the pivot pin and retainer clip Note Ensure that the retainer clip is bent properly so as to eliminate possibility of pivot pin coming out while using the pump Now the pump is ready start the pump by moving the lever with several quick strokes eee Pivot Pin amp Retainer Clip Compression Nut i SS ff Tae Lever Handle Rubber Grip a Delivery Spout Connecting Link epoublut Pump Head Pump Body Bung Nut Suction Tube Assembly If the pump fails to operate it may be necessary to prime Prime The Pump Turn the delivery spout upward Pour a few drops of the fluid being dispensed into the spout Start the pump by moving the lever with several quick strokes If the pump still fails to start Remove the pump from the drum and ensure the Suction tube is extended enough to reach the bottom of the drum
4. umpwith water based fluids solvents acids antifreeze gasoline etc e The pumpis constructed using plated steel components It should never be used to transfer fluids that may cause the pump to rust DISCLAIMER Whilst every effort has been made to ensure accuracy of information given in this document our policy of continuous improvement determines the right to change specifications without notice Customers must ensure that goods are suitable for the purpose intended Imperial dimensions shown as equivalent to Metric sizes are approximate and vice versa SERVICE INSTRUCTIONS LEVER ACTION BARREL PUMP Description Lever Action Barrel Pump is a hand operated heavy duty pump designed to transfer oil based fluids lubricants heating oil motor oil heavy amp light oils transmission oils and other non corrosive liquids Fits 15 gallons 50 litres to 55 gallons 205 litres barrels Delivery 300 ml 10 ounce of fluid per stroke The pump comes complete with self adjusting telescopic suction tube curved metal spout and 1 1 2 amp 2 bung nut Assembly amp Operation 1 Screw the Suction tube assembly into the bung nut Tighten the connection securely to eliminate any air leaks Note Apply thread sealent to the threads of the tube assembly before attaching it to the bung nut Do not use undue force when tightening 2 Screw the delivery spout nut part of the spout onto the pump head Tighten securely to el
Download Pdf Manuals
Related Search