Annovi Reverberi BLUE CLEAN 850 User's Manual
Contents
1. or those who have not read and understood the instructions in the manual is for bidden The introduction of inflammable explosive and toxic liquids into the cleaner is prohibited Use of the cleaner in a potentially inflammable or explo sive atmosphere is forbidden The use of non original accessories and any other accessories not specifically intended for the model in question is prohibited All modifications to the cleaner are prohibited Any modifications made to the appliance shall render the Declaration of Conformity null and void and relieve the manufacturer of all liability under civil and criminal law Main components B1 Engine B2 Reduction gearbox where fitted B3 Pump B4 Gun with safety catch B5 Lance B6 High pressure hose B7 Oilcaps 2 4 1 Accessories C1 Nozzle cleaning tool C2 Rotopower where fitted Technical data The technical data are specified in the enclosure Safety devices Caution Danger Never tamper with the safety devices Safety valve and pressure limiting valve The safety valve is also a pressure limiting valve When the gun trigger is released the valve opens and the water recirculates through the pump inlet Thermostat valve D1 If the water temperature exceeds the temperature set by the manufacturer the thermostat valve discharges the hot water and draws in an amount of cold water equal to the amount of water discharged Safety catch D prevents accident2. the cleaner on a flat surface Remove the casing where fitted to top up the oil level Replace the casing where fitted when done 6 2 1 Topping up the pump oil Add oil through the intake hole to restore the correct level For oil characteristics refer to the Oil characteris tics table 6 2 2 Topping up the reduction gearbox oil where fitted Add oil through the intake hole to restore the correct level For oil characteristics refer to the Oil characteris tics table 12 English 6 3 OilChange Caution Danger Spent oil must not be dumped because it is a pollutant It must be disposed of in accordance with legal reguirements Change pump and reduction gearbox oil where fitted after first 50 hours of operation and every 500 hours thereafter Remove the casing where fitted to change the oil Replace the casing where fitted when done 6 3 1 Changing the pump oil 6 3 2 Unscrew the drain plug and allow all the spent oil to flow out Screw the plug back into place Pour in oil through the filler hole Check that the oil level is correct For oil characteristics refer to the Oil characteris tics table Changing the reduction gearbox oil where fitted Unscrew the drain plug and allow all the spent oil to flow out Screw the plug back into place Pour in oil through the filler hole Check that the oil level is correct For oil characteristics refer to the Oil charact
3. CE EB PEE ELS HDSLNIA ONVITVLI cod 90665 FZ FR EN INSTRUCTIONS DE Sie besonders auf die SICHERHEITSANWEISUNGEN IT Leggere questo manuale prima dell installazione uso dell idropulitrice prestando particolare attenzione alle ISTRUZIONI PER LA SICUREZZA ES SOBRE SEGURIDAD RU C D CLARATION DE CONFORMIT FR Nous d clarons en assumant la pleine responsabilit de cette d claration que le produit est conforme aux normes suivantes et aux documents correspondants EN 60335 2 79 2004 Selon les prescriptions des directives 98 37 CE 73 23 CEE 89 336 CEE 2000 14 CE Date 24 03 2006 MODENA I Stefano Reverberi Managing Director de CE DICHIARAZIONE DI CONFORMITA IT Dichiariamo assumendo la piena responsabilita di tale dichiarazione che il prodotto amp conforme alle seguenti normative e ai relativi documenti EN 60335 2 79 2004 in base alle prescrizioni delle direttive 98 37 CE CEE 73 23 CEE 89 336 2000 14 CE Data 24 03 2006 MODENA I Stefano Reverberi Managing Director d CE DECLARATION OF CONFORMITY EN We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents EN 60335 2 79 2004 In accordance with the regulations 98 37 EC EEC 73 23 EEC 89 336 2000 14 EC n Date 24 03 2006 MODENA I Stefano Reverberi Managing Director C DECLARACI N DE CO
4. NFORMIDAD ES Declaramos asumi ndonos la plena responsabilidad al respecto que el producto cumple con lo establecido por las siguientes normativas y relativos documentos EN 60335 2 79 2004 sobre la base de lo dispuesto por las directivas 98 37 CE 73 23 CEE 89 336 CEE y 2000 14 CE Fecha 24 03 2006 M DENA 1 Stefano Reverberi Managing Director Lire ce manuel avant l installation utilisation du nettoyeur en faisant tr s attention aux INSTRUCTIONS POUR LA S CURIT Read this manual through carefully before installing using the cleaner paying special attention to the SAFETY Lesen Sie dieses Handbuch vor der Installation und dem Gebrauch des Hochdruckreinigers aufmerksam durch und achten Leer este manual antes de la instalaci n uso de la hidrolimpiadora prestando particular atenci n a las INSTRUCCIONES Mpoyuma me daHHoe pykosodcmeo neped ycmaHosko moeyHo MaWUHbI o6pauaa ocobeHHoe BHUMAHUE Ha WUHCTPYKIJUU TIO BE3OMACHOCTU KONFORMIT TSERKL RUNG Wir erkl ren in alleiniger Verantwortung dass das Produkt den folgenden Normen und normativen Dokumenten entspricht EN 60335 2 79 2004 gem den Bestimmungen der Richtlinien 98 37 EG 73 23 EWG 89 336 EWG 2000 14 EG Jo DE ce Datum 24 03 2006 MODENA I Stefano Reverberi Managing Director CE NEKNAPALMA COOTBETCIBMA RU 3aaBnaem Bo3naraa Ha CEGA NOJIHYIO OTBETCTBEHHOCTb 3a BAHHyHO AeKAapauyuio uro AaHHaA TIPOJYKLJMA COOTBETCTBYET CNEAYIOLJUM H
5. OPMaM u COOTBETCTBYIOLJUM AOKYMEHTIM EN 60335 2 79 2004 Ha OCHOBAHWU TPe60BaHUN AUPEeKTUB 98 37 EC 73 23 EEC 89 336 EEC 2004 14 EC Hara 24 03 2006 Mogena Vitanua Credano Pegep6epu Ynpaenaiouuti dupekmop NS N WHE A 10 English El GENERAL INFORMATION FIG 1 1 1 1 2 1 3 1 4 Use of the manual The USE MAINTENANCE manual forms an integral part of the power jet cleaner and should be kept for future reference Please read it carefully before installing using the appli ance Read the engine manufacturer s manual carefully If the appliance is sold the seller must pass on the manuals to the new owner along with the appliance Delivery The cleaner is delivered partially assembled in a card board box fixed to a pallet Caution Danger Suitable lifting equipment must be used when lifting the power jet cleaner The supply package is illustrated in fig 1 1 2 1 Documentation supplied with the appliance A1 Use and maintenance manual A2 Safety instructions A3 Declaration of conformity A4 Technical data A5 Engine instruction manual Disposing of packaging The packaging material must be disposed of in accord ance with the relevant legal requirements Safe
6. al spraying of water Noise levels At even short exposure times noise may cause hearing impairment in the long term Users must wear ear defenders to protect their hearing INSTALLATION FIG 2 3 1 3 2 Assembly Caution Danger All installation and assembly operations must be performed with the engine off The assembly sequence is illustrated in fig 2 Fitting the pressure release caps To prevent oil leaks the appliance is delivered with the oil intakes sealed with red caps which must be replaced with the pressure release caps supplied English 11 33 34 Assembling the rotating nozzle where fitted The rotating nozzle kit delivers greater washing power Water supply connection Caution Danger Only clean or filtered water should be used for intake The delivery of the water intake tap should be egual to that of pump capacity Do not use container and tanks to supply the appli ance Place the cleaner as close to the water supply system as possible 3 4 1 Connection points Water outlet OUTLET W Water inlet with filter INLET 3 42 Connection to the mains water supply The cleaner can be connected directly to the mains drinking water supply only if the supply hose is fitted with a backflow preventer valve as per current regulations in force Make sure that the hose is at least 13 mm and that it is reinforced ES ADJUSTMENTS FIG 3 4 1 4 2 Adjusting the pressure The regula
7. er istics table TROUBLESHOOTING Nozzle worn 6 4 Table 1 Oil characteristics Component Oil type Quantity kg Pump 850 SAE 30 W 0 9 Pump 840 SAE 30 W 0 9 Pump 830 SAE 30 W 0 3 Pump 820 SAE 30 W 0 3 Pump 810 SAE 75 W90 0 135 Reduction gearbox AGIP BLASIA W90 0 21 Storage Treat the appliance with non corrosive non toxic anti freeze before storing it away for winter Replace nozzle Water filter fouled Clean filter fig 5 Water supply pressure low Turn on water supply tap fully Pump does not reach work Air being sucked into system ing pressure Check tightness of hose fittings Air in pump Switch off the cleaner and keep depressing and releasing the gun trigger until the water comes out in a steady flow Switch the cleaner back on again Adjustable nozzle not positioned correctly Turn the adjustable nozzle E fig 3 Water intake from external tank Connect cleaner to the mains water supply Pressure drops during use Intake water too hot Reduce temperature Nozzle clogged Clean nozzle fig 5 Water leakage Seals worn Have the seals replaced at your nearest Authorised Service Centre Cleaner noisy Water too hot Reduce temperature see technical data Oil leakage Seals worn Contact your nearest Authorised Service Centre Engine malfunction Refer to the engine manufacturer s manual Water escapes from th
8. er mostat valve max rated value stated on nameplate Water temperature inside nozzle has exceeded With appliance in operation do not stop the water jet for more than 5 minutes at a time
9. tor G is used to adjust the working pressure The pressure is shown on the pressure gauge Adjusting the nozzle Water flow is adjusted by regulating the nozzle E HEH INFORMATION FOR USE FIG 4 5 1 5 2 5 3 Caution Danger Never use the cleaner when malfunctioning In the event of damage the high pressure hose must be replaced immediately to prevent bursts Preliminary checks Before using the cleaner check the oil level in the engine see engine constructor s manual in the reduction gearbox where fitted inthe pump Check the reduction gearbox and pump oil gauges to check the oil level It should be halfway up the gauge If necessary top up with oil having the same characteris tics see the Oil characteristics table Controls For information about the engine controls refer to the engine constructor s manual Water jet control lever I Caution Danger During operation the cleaner must be posi tioned on a flat surface firm enough to support it securely Starting the appliance Caution Danger Before starting up the cleaner check that the water supply hose is connected properly use of the cleaner without water will damage the appliance 1 Turn the water supply tap fully on 2 Release the safety catch D 5 4 5 5 5 6 5 7 3 Keep the gun trigger depressed and start the engine 4 Keep the gun trigger depressed for a few seconds to vent the air from the p
10. ty signs Comply with the instructions provided by the safety signs fitted to the cleaner Check that they are present and legible otherwise fit replacements in the original positions E1 sign indicates that the cleaner must not be dis posed of as municipal waste it may be handed in to the dealer on purchase of a new cleaner The cleaner s electrical and electronic parts must not be reused for improper uses since they contain substances which constitute health hazards E2 sign indicates that ear defenders must be worn JPY TECHNICAL INFORMATION FIG 1 2 1 2 2 Envisaged use This appliance has been designed for individual and professional use for the cleaning of vehicles machines boats masonry etc to remove stubborn dirt using clean water and biodegradable chemical detergents Vehicle engines may be washed only if the dirty water is disposed of as per regulations in force Intake water temperature below 60 C Intake water pressure below 10 bar Operating ambient temperature above 0 C The power jet cleaner is compliant with the 98 37 EC Directive Operator Use of the cleaner requires specific technical skill and training and a good sense of responsibility The operator must meet specific physical and mental requirements to be suitable for the job in hand the clean er must therefore only be used by the appointed person 2 3 2 4 2 5 2 6 2 7 Improper use Use by unskilled persons
11. ump To prevent damage to the appliance when running do not stop the water jet for more than 5 minutes at a time Stopping 1 Stop the engine 2 Depress the gun trigger and discharge the residual pressure inside the hoses 3 Engage the gun safety catch D Refilling and using detergent IPlace the hose straight in the detergent container Recommended cleaning procedure Dissolve dirt by applying the detergent mixed with water to the surface while still dry When dealing with vertical surfaces work from the bot tom upwards Leave the detergent to act for 1 2 minutes but do not allow the surface to dry Starting from the bottom use the high pressure jet at a minimum distance of 30 cm Do not allow the rinse water to run onto unwashed surfaces Ending the working session 1 Stop the engine 2 Turn off the water supply tap 3 Discharge the residual pressure from the gun until all the water has come out of the nozzle 4 Engage the gun safety catch D 5 Remove the water intake hose 6 Remove the detergent hose from the container KH MAINTENANCE FIG 5 6 1 6 2 Any maintenance operations not covered by this chap ter should be carried out by an Authorised Sales and Service Centre Caution Danger Stop the engine before doing any work on the cleaner Cleaning the filter Clean the suction filter L after every 50 hours of operation Topping up the oil level The oil level must be topped up with
Download Pdf Manuals
Related Search