American Standard Tendence T086.500 User's Manual
Contents
1. Installation Instructions TENDENCE TO86 502 BATH SHOWER TRIM KIT TO86 501 with EverClean Finish TO86 500 Congratulations on purchasing your American Standard faucet with EverClean finish found only on American Standard faucets EverClean Finish One wipe effortlessly removes spots Eliminates the need for cleaners and scrubbing Permanent surface protectant remains beautiful for the life of the faucet Certified to comply with ANSI A112 18 1 e EverClean available on Polished Chrome Satin Nickel U S Patent No D403 750 Stainless Steel Polished Brass or any combination of these finishes M9368380 Rev 1i To ensure that your installation proceeds smoothly please read these instructions carefully before you begin ROUGHING IN DIMENSIONS m To assure proper positioning in relation to wall note roughing in dimensions 1 5 8 TO 3 1 4 FINISHED WALL 1 2 NPT OPTIONAL TO FINISHED FLOOR USUALLY BETWEEN 65 AND 80 pr 7 1 1 2 REF 1 1 2 MIN 74 FOR HEAD CLEARANCE 48 OPTIONAL 2 NPT TOP OF TUB RIM Pra BOTTOM OF TUB INSTALL TRIM Remove PLASTER GUARD 1 Push CAP 2 on valve place ESCUTCHEON HOLDER 3 and attach with LONG SCREWS 4 Place ESCUTCHEON 5 and attach with SHORT SCREWS 6 Choose one of the DECORATIVE RINGS 7 and push it onto CAP 2 Push HANDLE 11 onto cartridge stem and t2. ighten SET SCREW 12 from below NOTE Lift handle to access SET SCREW 12 Install SHOWER ARM 8 SHOWER HEAD 9 and DIVERTER SPOUT 10 Check proper operation of HANDLE 11 and DIVERTER SPOUT 10 a ADAUST MOT EWIE STOR EE aA ADJUSTMENT WHEN WATER IS TOO HOT TEMPERATURE SETTING NUMBERS PRY RED RING FORWARD AND ROTATE 1 COUNTER CLOCKWISE ONE CLICK B ADJUSTMENT WHEN WATER IS TOO COLD PRY RED RING FORWARD AND ROTATE CLOCKWISE S ES RED RING HOT LIMIT SAFETY STOP HOT LIMIT SAFETY STOP ADJUSTMENT By restricting handle rotation and limiting the amount of hot water allowed to mix with the cold the HOT LIMIT SAFETY STOP reduces risk of accidental scalding To set the maximum hot water temperature of your faucets all you need to do is adjust the setting on the HOT LIMIT SAFETY STOP E Use a flat blade screwdriver or your fingers to pull up and rotate red HOT LIMIT SAFETY STOP 1 Follow Step A or B to adjust min max discharge temperature O being the hottest to 7 the coldest temperature setting Factory set at O 3 EverClean Finish Care Instructions American Standard s EverClean finish will wipe clean with a soft dry cloth A soft cloth with clean water may also be used if desired No additional cleaning products are required DO NOT USE Soaps acid polish abrasives harsh cleaners or a cloth with a coarse surface M968388 Rev 1 1
Download Pdf Manuals
Related Search