American Standard STUDIO 621.001 User's Manual
Contents
1. VANITY INSTALLATION Assemble vanity as per instructions Mounting holes are provided on the rear of the lavatory so it can be secured to the wall if desired Shut Off Valves Mount the faucet and drain assembly not included on the sink following the Connect supply line to faucet finger tight and manufacturer s instructions Be certain carefully bend tubes to engage with the supply to apply a bead of sealing putty on the shut off valves Tighten connections at faucet underside of the drain Part A in order and shut off valves for secure seal to ensure a watertight seal between the sink and drain Remove excess putty after installing drain on sink e Place the sink on the vanity to check for alignment and clearance e The sink should be centered left to right on the vanity with the front edge of the sink even with the front of the vanity e Secure sink to furniture as per vanity instructions Connect trap to drain assembly hand tight to check alignment It may be necessary to cut off part of the tailpiece area B or part of the horizontal leg of the trap area C Secure joints for watertight assembly REPAIR PART NO DESCRIPTION 738990 0020A CHROME OVERFLOW CAP 2 7301244 100 Rev A2. INSTALLATION INSTRUCTIONS American Standard CARE AND MAINTENANCE Style That Bit Better ABOVE COUNTER SINK FOR USE WITH 0621 001 STUDIO Thank you for selecting American Standard the benchmark of fine quality for over 100 years To ensure this product is installed properly please read these instructions carefully before you begin Certain installations may require professional help Also be sure your installation conforms to local codes A CAUTION PRODUCT IS FRAGILE TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE NOTE Pictures may not exactly define contour of china and components RECOMMENDED FAUCET 2064 101 ONE lavatory faucet xLog on to www americanstandard us com for additional faucet selections RECOMMENDED TOOLS AND MATERIALS Putty Knife Regular Screwdriver Adjustable Wrench Hacksaw Phillips Screwdriver Pipe Wrench Tubing Cutter Tape Measure Silicone Adhesive OBSERVE LOCAL PLUMBING AND BUILDING CODES COUNTERTOP INSTALLATION Using the template provided locate the position of the sink ij on the countertop Provide proper clearance under the countertop for the faucet supply lines drain assembly and the structural parts of the cabinet NOTE If replacing an existing sink be certain to shut off water supply before removing old sink Channel Lock Pliers Jig Saw Basin Wrench Drill Plumber s Putty or Caulking After checking fit and alignment turn sink upside down and apply a generous portion of silicone
3. adhesive around the under side of the rim near the edge Place sink in position Wipe off excess adhesive Drill a clearance hole inside the perimeter line of the template for countertop installation Perimeter of Perimeter template of template 6 Mounting holes are provided on the rear of the lavatory so it can be secured to the wall if desired Mount the faucet and drain assembly not included on ae 7 the sink following the manufacturer s instructions Be certain to apply a bead of sealing putty on the Connect supply line to faucet finger tight and carefully bend tubes to engage with the supply A in order to ensure a watertight seal between the sink and drain Remove excess putty after installing drain on sink e Place the sink temporarily into the template e Check for alignment and clearance e Mark the sink and countertop in several places as a guide for the installation location Product names listed herein are trademarks of AS America Inc AS America Inc 2009 shut off valves Tighten connections at faucet and shut off valves for secure seal Shut Off Valves Connect trap to drain assembly hand tight to check alignment It may be necessary to cut off part of the tailpiece area B or part of the horizontal leg of the trap area C Secure joints for watertight assembly 7301244 100 Rev A USE FUTURE R F O SAVE
Download Pdf Manuals
Related Search