Aiphone KBW-M User's Manual
Contents
1. at KBW M Connector BNC Connector Wire Aiphone wire 871802 18AWG 2 conductor solid non shielded FPLR type Wiring distance With Aiphone 871802 wire Max 650 from KBW M to KB 3MRD Dimensions 5 1 2 H x 3 W x 1 1 2 D Note Only information pertaining to the connection and operation of the KBW M and connection of a color CCTV camera is included here For complete installation wiring and operational information about the KB system please refer to the KB 3MRD Installation Manual Aiphone Communication Systems Toll Free Technical Support 1700 130th Ave N E Bellevue WA 98005 1 800 692 0200 Pg 2 425 455 0510 FAX 1 800 832 3765 KBW M Instr FAX 425 455 0071 E mail tech serv aiphone com 0703bkjs2. switch to Camera 3 CCTV and a fourth time turns the monitor off 2 OPTIONAL An input for a motion detector is provided to activate the CCTV camera The Monitor will turn on and a chime will be heard The monitor will stay on for approximately 30 seconds Pg 1 OPERATIONS Activation of a camera from a Monitor 1 The CCTV camera can be viewed on any of the KB monitors in the system by pressing the MONITOR button 2 The video door stations and or camera s will come up sequentially based on the inputs that they are on One press of MONITOR button brings up camera 1 second press brings up camera 2 third press brings up camera 3 3 After the last camera in the system is activated the next press of the MONITOR button will turn off the monitor If the monitor is left on it will automatically time out after approximately 30 seconds Activation of a camera by the motion detector Optional feature Any motion detector with a normally open contact can be connected to the KBW M to activate the CCTV camera 1 When the motion detector is tripped the camera will turn on and be viewed on all KB monitors in the system 2 Achime will be heard and the appropriate LED will be lit on the monitor s Door 1 4 Stroke Chime and LED 1 Door 2 2 Stroke Chime and LED 2 Door 3 8 Stroke Chime and LED 3 3 The camera will automatically turn off in 30 seconds SPECIFICATIONS Power Supplied by KB 3MRD CCTV Camera input 1V Peak to Peak
3. AIPHONE Special Order Products Video Modulator for the KB Series Color Video System INSTRUCTIONS The KBW M adaptor converts a standard CCTV camera s signal to a 2 wire signal compatible with the KB 3x5 Color Video system This allows the utilization of a color camera on a video input on the KB system viewable from any monitor in the system A camera and KBW M can be added to any input that is not used by a KB DAR video door station KBW M Camera Output to O input KB 3MRD A1 A2 MD MD Input from Motion Detector KBW M TERMINAL DEFINITIONS BNC Connector Coax input from CCTV camera 2 Wire output to KB 3MRD Input from motion detector with normally open contacts WIRING DIAGRAM KBW M Modulator for Standard CCTV camera KB DAR Non Polarized Non Polarized Non Polarized CCTV Camera 75 Ohm 1V Peak to peak Independently powered BE Motion Detector _ PS 2420UL Optional Motion Detectors with N O Contacts Detection Systems DS720I Pulnix 6612 Intellisense 8140S Ademco 1998PI Sentrol AP750 Or any signaling device that provides a normally open momentary dry closure KB 3MRD NOTES 1 In this system example the CCTV camera is on input 3 Cameras are viewed by pressing the MONITOR button on any monitor Press once to turn on camera 1 KB DAR press again to switch to camera 2 KB DAR 2 Pressing MONITOR a third time will
Download Pdf Manuals
Related Search