Addonics Technologies DDU3SAS User's Manual
Contents
1. Press ENT to start simulation If rewriteable disc is used all contained data will be erased before simulation 3 Test amp Copy Function 3 will do copy simulation before copy function Press ENT to start simulation and copy Note only passed test disc will do the copy 4 Verify Function 4 check readability of the burned disc 5 Compare Function 5 to check if target disc is identical to source disc Compare result OK Source and target disc are identical Fail TOC not match compare skipped due to contains do not match Diff Shows how many bytes are different 6 Prescan Function 6 to check if source disc is readable and without read error 7 Disc Info Function 7 to report disc information disc type and capacity 8 Select Source Function 8 to set which drive as source device The drive on CH01 will be chosen as source device Press ENT and then press A Y to select the source Assume that HDD is selected as the source device and selected partition contains no data an error message Source Drive Not Ready will show on LCD while trying copy function In that case go to Function 9 Image to load the data into the chosen partition first 9 Image Function 9 Image is valid only when a hard disk is installed Disc is loaded to hard disk as an image file 9 1 Load Load function loads whole disc data from any writers into the current partition of the hard disk P A means current partition is A 9 22. User Guide 1 3 Blu Ray DVD Duplicator DDU3SAS www addonics com v3 1 11 www addonics com Technical Support Ph 408 573 8580 If you need any assistance to get your unit functioning properly please have your F Bia 408 573 8588 product information ready and contact Addonics Technical Support at ax z Email http www addonics com sales query Hours 8 30 am 6 00 pm PST Phone 408 453 6212 Email http www addonics com support query Source SATA Port 3 Destination top port SATA Ports 15 pin SATA Power Connector Mounting Holes 2 on each side LCD Duplicator Panel Scroll Up a enr Executes Function v esc Cancels Function Scroll Down 1 Technical Support Hours 8 30 am 6 00 pm PST Phone 408 453 6212 Email http Mwww addonics com support query 12 19 Quick Compare Quick Compare is related to function 5 Compare Once compare error byte reach to the setting figures compare process will stop 12 20 Link Mode Select Select Models Now press ESC and Y to enter the following screen Press ENT to enter the Link Mode Select screen Use A VW to choose between the Stand Alone Middle Tower or Last Tower modes as appropriate Attention Once a tower has been set as Middle Tower or Last Tower and the J14 jumper is also set to Target mode the LCD will show that it is in Target mode 12 21 Re Scan Select Models Now press ESC and Y to enter the following screen Pre
3. press ENT again will cancel the selection After selection use A move to the End which is between 1st track and last track Press ENT to end of selection and use A Y to confirm Yes or No Press ENT after burning system will ask if you want to continue edit use A Y to confirm Yes or No If you want to continue edit the current source CD will be ejected and ask you to insert next disc Repeat the above process for editing After editing system will show Close all disc s session Yes use A Y to confirm Yes or No Once session is closed no more tracks can be added Attention Commercial audio player might not able to play open session disc close session is suggested for max compatibility 10 2 CD to HDD Edit To select tracks from single or multi audio CD and create image to specific partition of HDD The basic operation method is same as CD to CD Edit system still ask you to insert empty disc even the target drive is HDD If burning successful system will show Image load OK which means the selected tracks are written to temporary partition Press ENT after burning system will ask if you want to continue edit use A W to confirm Yes or No If you want to continue edit the current source CD will be ejected and ask you to insert next disc Repeat the above process for editing If No is selected system will show Burn or Move to partition 2 use A Y to confirm Burn or Move Burn Burn the selected tracks to CD Move
4. Delete Image If you want to delete an image file stored in a particular partition you can use this function to delete image Press ENT the system will confirm with you for the action use A Y to select Yes or No then press ENT for confirmation 9 3 Image Info To check selected image information First enter into the function and press W for more information 9 4 Compare Image This function is used to check if created image is identical to source disc When result shows on LCD press ENT for more detail information Compare result OK Source and target disc are identical Fail TOC not match compare skipped due to contains not match Diff shows how many bytes are different 9 5 Select Image This function is to select a partition as source image from the hard disk Pressing A Y to select a partition LCD will show image name and capacity 9 6 Image Src Drive This function is used to set the image source drive for loading disc data into a particular partition Enter into the function and use A Y to select image source drive 9 7 ImageFormat Info This function shows which format is used for current hard disk It is related to function 12 4 Format HDD 9 8 Edit This function is to edit selected image s title sub1 title and sub2 title Only valid when the current partition contains an image file can title A title should be composed of 1 to 13 characters The character can be alphabet number or the combination of both Use A Y
5. each side Duplicating drive s Make sure the source and target drives are connected to the proper ports When the duplicator is on it will go through the steps below Step 1 Duplicator LED will light up and the device will beep Step 2 LCD will display initial steps Duplicator Ver Displays duplicator version Initializing SDRAM Detect Source Target Will detect the type of source targets Copy Defaults to the first function which is to copy RON Step 3 Once the duplicator gets to the copy menu press ENT to begin copying The duplicator will auto detect the drive and display its information on the LCD Make sure that the power LEDs of the flash reader are blinking the blinking indicates drive activity You can find the complete user manual of the 1 3 Blu Ray DVD Duplicator panel on the driver disk under user guides You can also download it from our website at www addonics com support user_guides Panel Functions LCD Duplicator Panel Scroll Up Cd a enr Executes Function v esc Cancels Function Scroll Down The Duplicator has 6 functions to choose from 1 Copy 7 1 Source 9 1 Load 2 Test 7 2 Target 9 2 Delete Image 3 Test amp Copy 9 3 Image Info 4 Verify 9 4 Compare Image 5 Compare 9 5 Select Image 6 Prescan 9 6 Image Src Drvie 7 Disc Info 9 7 ImageFormat Info 9 8 Edit 8 Select Source 9 9 Format HDD 9 Image 9 10 Loadlmage Method 10 Edit Track 10 1 CD to CD
6. to select the number or alphabet After selecting a desired one press ENT for next character the end of key in press and hold ENT for 2 sec and release for next title Technical Support Hours 8 30 am 6 00 pm PST Phone 408 453 6212 Email http www addonics com support query 9 9 Format HDD Hard disk must be formatted by the system for the very first time Hard disk will be partitioned into the chosen partition format If no hard disk is installed LCD will show the message as No Valid HDD All data on the hard drive will be erased after the hard disk format After the hard drive is formatted correctly LCD will show Format HDD ok Press ENT to verify HDD or press W and choose No return back to menu 9 10 LoadImage Method This function is to change the way to save Image There are 2 formats for choice Auto and Manual Auto means system auto assign partition for loaded image Manual let you to choose which partition to load image to 10 Edit Track for Audio CD only Function 10 Edit Track is exclusively designed for editing a collection of favorite songs from CDs In other words you can collect songs on a number of CDs and merge them into a single CD There are 3 sub functions CD to CD CD to HDD and Close Session 10 1 CD to CD Edit To select songs from source CD and then burn into a blank CD R RWs You can press Y to see the rest of tracks If you want to select the track press ENT then a will shows up
7. Edit 10 2 CD to HDD Edit 11 Lightscribe gt 11 1 Print 10 3 Close Session 12 Setup 11 2 Load LSI to HDD 11 3 Select LSI File 11 4 Delete LSI File 11 5 Load LSI Drive 11 6 Coypright Info 12 1 Language 12 10 Burn On The Fly 12 19 Quick Compare 12 2 Burn Speed 12 11 Bum Mode 12 20 Link Mode Select 12 3 Read Speed 12 12 Display Time 12 21 Re Scan 12 4 Auto Start Drive 12 13 Button Sound 12 22 Tray In Out 12 5 Startup Menu 12 14 Device Info 12 23 BootTime Delay 12 6 Auto Verify 12 15 System Info 12 24 Start Tray Eject 12 7 Auto Compare 12 16 Quick Erase 12 25 Disc Redetect 12 8 Auto Prescan 12 17 Full Erase 12 26 Show Bum Speed 12 9 Eject Disc 12 18 Auto Close Tray Technical Support Hours 8 30 am 6 00 pm PST Phone 408 453 6212 Email http www addonics com support query To select any function from 1 to 13 as the first item appears on the screen whenever system is turned on 12 6 Auto Verify To set if auto verify target disc s readability after copy function The default is Off Press W to select On 12 7 Auto Compare To set if auto do comparison after copy function to check if source and target disc are identical The default is Off Press Y to select On 12 8 Auto Prescan To set if auto scan source disc before copy function The default is Off Press Y to select On 12 9 Eject Disc There are 3 kinds of tray behavior when copy process is completed Eject Good Only Only good disc will be ejected after bur
8. for session must be closed to max playback compatibility However no more tracks can be added once session is closed 11 LightScribe Optional Function LightScribe is an optical disc recording technology that uses specially coated recordable CD and DVD media to produce laser etched labels with text or graphics as opposed to stick on labels and printable discs This function includes 6 sub functions Print Load LSI to HDD Select LSI File Delete LSI File Load LSI Drive and Coypright Info 11 1 Print Use optical drive s laser to print loaded LSI file Disc should placed up side down 11 2 Load LSI to HDD Load LSI to hard disk 11 3 Select LSI File Select LSI file from hard disk for laser printing 11 4 Delete LSI File Delete a LSI File stored in a particular partition Use A Y to confirm Yes or No 11 5 Load LSI Drive This function is to select source drive in order to load LSI File into a particular partition 11 6 Coypright Info This function is to see the LightScribe copyright information 12 Setup To change the default setting However it is suggested to use the default for the optimal operation There are 24 sub functions Language Burn Speed Read Speed Auto Start Drive Startup Menu Auto Verify Auto Compare Auto Prescan Eject Disc Burn On The Fly Burn Mode Display Time Button Sound Device Info System Info Quick Erase Full Erase Auto Close Tray Quick Compare Tray In Out BootTime Delay Start Tray Eject D
9. isc Redetect and Show Burn Speed 12 1 Lanuage Now press ENT and you will enter the following figure The function Language lets you select a language in which messages can be shown on LCD 12 2 Burn Speed Now press ESC and Y to enter the following figure This function lets you control the burning speed of CD writers DVD Burn Speed is defaulted to 16X BD Burn Speed default is 4X CD Burn Speed default is 32X and Audio Burn Speed is is defaulted to 16X 12 3 Read Speed To change default reading speed of source disc The default is Off Press W to select 1 or 2 blank disc 12 4 Auto Start Drive System will auto start to copy or test once blank disc is ready 12 5 Start Up Menu 7 Technical Support Hours 8 30 am 6 00 pm PST Phone 408 453 6212 Email http www addonics com support query 1 Copy Function 1 Copy instant copy source disc image to the target drives optical writes Use Function 8 to select source drive before copying Select function 1 place a source disc into source drive and blank disc into the target drives A rewriteable disc can be used as target media however all data will be erased before copying Press ENT to start copy function when all discs are ready After complete system will show spent time and the amount of OK disc on the screen the OK disc will be ejected 2 Test Function 2 copy simulation no data will be written to the write once media DVD R is not supported for this function
10. ning Eject All Disc All discs will be ejected after burning Do Not Eject All discs stay in after burning The default is Eject Good Only 12 10 Burn On The Fly Burn On The Fly means data will be copied directly from the source disc to the target disc When the setting is Off the data will be loaded into temporary partition of HDD first then copy from HDD to disc The default is On Press Y to select Off 12 11 Burn Mode There are two modes DAO Disc At Once and TAO Track At Once The default is DAO Press Y to select TAO 12 12 Display Time To set if display a timer while copying The default is On Press Y to select Off 12 13 Button Sound To enable or disable beep sound while press a key 12 14 Device Info To show the writer information 12 15 System Info To show system Information 12 16 Quick Erase To erase data on the DVD rewriteable discs quickly 12 17 Full Erase To erase data on the DVD rewriteable discs completely Compared with Quick Erase Full Erase takes longer time to do the job 12 18 Auto Close Tray All tray will be closed in selected time and if disc is ready system will auto start copy test or both functions depends on which function is stay on the LCD screen The default is Off press Y to select 1 Byte 1 KB 10 KB 100KB 1 MB 10MB 100MB etc 8 10 3 Close Session Single session format is used for Audio CD and commercial audio player is not able to play open session audio CD there
11. ss ENT to enter the Re Scan screen By default this is set to No Use A Y to choose Yes then press ENT to scan the chosen connected tower 12 22 Tray In Out Lets you control the drive tray ejecting The default is All Once and there have Divide 2 Times for selection The default is 5 second more option is up to 99 seconds 12 23 BootTime Delay To set the device scanning time during the system booting 12 24 Start Tray Eject To set if do eject all tray after system boot up The default is On Press W to select Off 12 25 Disc Redetect The function is designed specially for bad quality disc the system will detect the disc one more time if disc recognition error occurred The default is Off Press Y to select On 12 26 Show Burn Speed Now press ESC and Y to enter the following figure This function lets LCD shows the burning speed of CD DVD BD writers The default is On Press Y to select Off Technical Support Hours 8 30 am 6 00 pm PST Phone 408 453 6212 Email http www addonics com support query Quick Guide Installing the 1 3 optical duplicator Step 1 Insert the 1 3 Blu Ray DVD Duplicator into standard 5 25 drive bay Step 2 Connect the power cable from you system to the 4 pin floppy power connector Step 3 Connect the source drive to the source SATA port via SATA cable and the target drives to the destination SATA port via SATA cable Step 4 Screw the duplicator into the drive bay with 4 screws 2 on
12. to partition Create an image for selected tracks
Download Pdf Manuals
Related Search