Acnodes PMH 8064 User's Manual
Contents
1. are deter mined by the display card in your computer 2 Is interference signal appeared on LCD normal when shutting down the computer In rare cases interference may appear on the monitor This may be caused by signal rate of VGA card and is considered normal The image quality can be improved by adjusting the phase or pixel rate automatically or manually 3 The membrane power light is not ON Press the power On Off on LCD membrane to check if the monitor is in the ON mode Check the power cord is properly connected to the LCD keyboard drawer and power outlet 4 Screen image is not centered or sized properly Press the mM button for two seconds to automatically adjust the image Adjust the H position and V position settings via On screen menu 5 Must calibration be down after installation completed After connecting your touch monitor and installing the software you must calibrate the touchscreen Calibration serves two purposes A Set the active area of the touchscreen B Align the touchscreen s active area to the underlying video 6 The touchscreen is not accurate Calibration should be required Make sure to touch the centre of each X once ata time 7 The touchscreen is accurate in most areas but off a lot in certain area The touchscreen may have linearity problems Please use touch screen and select more points calibration AN Copyright 2011 Acnodes Inc CNODES All rights reserved Product description2. 14628 Central Blvd are subject to change without notice For latest product information Chino CA91710 please visit Acnodes web site at www acnodes com tel 909 597 7588 fax 909 597 1939 Screen size Interface Optical transmittance Surface hardness Operating system e Capacitive Screen size Interface Optical transmittance Surface hardness Operating system Remarks PMH 8064 6 5 open frame monitor 1000 nits high brightness LCD 6 5 USB serial 80 3 3H JIS K5400 Windows 88 2000 ME AP NTs CE DOS Linux 6 5 USS senal 23 t2 OH Surtace hardness withstand ower 200 million touches Windows 98 2000 MES XP NTS CE DOS Linux USB touchscreen package includes 1 x 6ft USB cable quick reference guideline and CD disc Serial touchscreen package includes 1 x 6ft serial cable quick reference guideline and CD disc For detailed information please refer to the attached CD disc As the touchscreen unit is not made of toughened glass please handle it carefully INCNODES 14628 Central Blvd Chino CA91710 tel 909 597 7588 fax 909 597 1939 Copyright 2011 Acnodes Inc All rights reserved Product description and product specifications are subject to change without notice For latest product information please visit Acnodes web site at www acnodes com PMH 8064 6 5 open frame monitor 1000 nits high brightness LCD 6 2 Touchscreen Quick User Guideline
3. 5 If the LCD display is still not clean enough apply a small amount of non ammonia non alcohol based glass cleaner onto a clean soft lint free cloth and wipe the screen 6 Don t use water or oil on the monitor directly IN Copyright 2011 Acnodes Inc CINODES All rights reserved Product description and product specifications 14628 Central Blvd are subject to change without notice For latest product information Chino CA91710 please visit Acnodes web site at www acnodes com tel 909 597 7588 fax 909 597 1939
4. and product specifications 14628 Central Blvd are subject to change without notice For latest product information Chino CA91710 please visit Acnodes web site at www acnodes com tel 909 597 7588 fax 909 597 1939 PMH 8064 6 5 open frame monitor 1000 nits high brightness LCD 8 Why can the display not match to the touchscreen correctly after calibration The touchscreen will be aged after a certain period of consumption or under harsh environment It is normal The touchscreen driver has an utility to adjust the situation The calibration point can be more on the touch screen INCINIODES Copyright 2011 Acnodes Inc All rights reserved Product description and product specifications 14628 Central Blvd are subject to change without notice For latest product information Chino CA91710 please visit Acnodes web site at www acnodes com tel 909 597 7588 fax 909 597 1939 PMH 8064 6 5 open frame monitor 1000 nits high brightness LCD CHAPTER 11 CLEANING THE LCD DISPLAY You may need the following precautions before you begin to clean the LCD display please read and understand the details below fully 1 Make sure the monitor is turned off 2 Never spray or pour any liquid onto the screen directly 3 To remove dust and other particles wipe the screen with a clean soft lint free cloth 4 Be cautions of all kinds of cleaning solvents or chemicals some individuals may be harmful to the LCD display
5. PMH 8064 6 5 open frame monitor 1000 nits high brightness LCD User Manual PMH 8064 6 4 industrial High Brightness open frame LCD monitor Copyright 2011 Acnodes Inc INCNIODES All rights reserved Product description and product specifications 14628 Central Blvd are subject to change without notice For latest product information Chino CA91710 please visit Acnodes web site at www acnodes com tel 909 597 7588 fax 909 597 1939 PMH 8064 6 5 open frame monitor 1000 nits high brightness LCD CHAPTER 1 Introduction 1 1 MponantSarcguardS ote eon eee een tn ae nr ne ec ee a ee ee 1 12 PEG 1 0 heen ene E E ee 2 o UNPA ONN ea eee 2 14 Optional CCCs SOM Socrates en E EEA iE ERE A 2 CHAPTER 2 Front Aluminum LCD Panel ral PACK OCC ONON ea E a 3 2e OE AE A e E E nardedacoundesndeetaredes 4 223 NONINO TNO ase crete tice sete cet E E nate eeeeedese aces 5 CHAPTER 3 Connection 3 1 On Screen Display ODCl Al OM sissssacssunnaisaaxansendaansaedceanoanteosdantanditmneaniaenaimieetannmnnsdaiaeniaesmmunieteiaasens 7 SL Omo ois U Erte en en ee nn ee eee ee 9 CHAPTER 4 Operation 4 1 EC ID SP ECHIG ANON swiasnctmiacctacawsaiasadeanisasneadasananaicsinnetiteaaansiamadsawannsadaeiiaiGaridneneaaananeaniieasaadetanannes 11 CHAPTER 5 AV BNC Options FI AVENC 6 6 aera a tee enn AE ee eee ee E E eee ee 12 CHAPTER 6 Touchscreen Options Cet POUCH S TECN ODIO S eari E E A 13 6 2 Touchscreen Quick User GUIGEIINGS
6. US 1 3 BS 1363 power cord UK SOF d 1 4 CEE 7 4 power cord German ay 1 5 AS 3112 power cord Australia INCINIODES Copyright 2011 Acnodes Inc All rights reserved Product description and product specifications 14628 Central Blvd are subject to change without notice For latest product information Chino CA91710 please visit Acnodes web site at www acnodes com tel 909 597 7588 fax 909 597 1939 PMH 8064 6 5 open frame monitor 1000 nits high brightness LCD CHAPTER 2 FRONT ALUMINUM LCD PANEL 2 1 Package Contents 1 LCD Display x 1 pc 5 Auto switch Power Adapter x 1 pc 2 VGA Cable male to male x 1 pc 3 User Manual x 1 pc 4 Power Cord x 1 pc IN Copyright 2011 Acnodes Inc CNODES All rights reserved Product description and product specifications 14628 Central Blvd are subject to change without notice For latest product information Chino CA91710 please visit Acnodes web site at www acnodes com tel 909 597 7588 fax 909 597 1939 PMH 8064 6 5 open frame monitor 1000 nits high brightness LCD Front View Rear View ppsa ada adn adn min adn ada aia aii 1 Rear Case 2 Class ATFT LCD Panel 3 Universal open frame mounting 4 LCD Membrane INCINIODES Copyright 2011 Acnodes Inc All rights reserved Product description and product specifications 14628 Central Blvd are subject to change without notice For latest product information Chino CA91710 please v
7. boad Full oad Output rating Output voltage Output current Efficiency Remarks Package does not include power cord and AC power adapter IN Copyright 2011 Acnodes Inc CINODES All rights reserved Product description and product specifications 14628 Central Blvd are subject to change without notice For latest product information Chino CA91710 please visit Acnodes web site at www acnodes com tel 909 597 7588 fax 909 597 1939 PMH 8064 6 5 open frame monitor 1000 nits high brightness LCD CHAPTER 8 TV TURNER OPTIONS 00808 000 oO O 6 cc 0090 ld 4 TV 4 Audio L 7 S Video 2 Audio out 5 Audio R VGA 3 Audio in 6 Video Power Remarks Package includes 1 x remote controller 8 1 How to use Remote Controller INCINIODES Copyright 2011 Acnodes Inc All rights reserved Product description and product specifications 14628 Central Blvd are subject to change without notice For latest product information Chino CA91710 please visit Acnodes web site at www acnodes com tel 909 597 7588 fax 909 597 1939 PMH 8064 6 5 open frame monitor 1000 nits high brightness LCD POWER Switches on or ofthe TV MUTE Turn onor off the speaker AV Switch to Av mode Select channels For channel number 10 and above 0 9 enter the second digit within two seconds V i Increase ordecrease the speakervolume CH Increase ordecrease the channa number MENU Displaythe
8. cnodes com PMH 8064 6 5 open frame monitor 1000 nits high brightness LCD CHAPTER 3 CONNECTION VGA Power Caution The LCD Display are hot pluggable but components of connected devices may not be hot pluggable Plugging and unplugging cables while connected devices are pow ered on may cause imeversible damage of the devices and LCD Display Before attempting to connect anything to the LCD Display we suggest that tum off power to all devices before connecting them Apply power to connected devices again only after the LCD Display re ceiving power The company is not responsible for damage caused in this way 3 1 On Screen Display Operation PEE PEPEE REEERE ETETE TETE TE tt it E LE E D E EI EI DEOD a ae ae ae ae H e a a E W aa coe cane ooon err cus LCD membrane IN Copyright 2011 Acnodes Inc CNODES All rights reserved Product description and product specifications 14628 Central Blvd are subject to change without notice For latest product information Chino CA91710 please visit Acnodes web site at www acnodes com tel 909 597 7588 fax 909 597 1939 PMH 8064 6 5 open frame monitor 1000 nits high brightness LCD Membrane Switch Function oO Power light L Green Ori i Orange Power saving Power on off LOD E Display the OSD menu A scrolls through menu options and adjusts the displayed control P S To auto adjustment by pressingthe button for seconds Exit the OSD scree
9. creen was mapped to area for this touch system to guide the user do 25 points calibration User should follows the guide to touch and hold the blinking X symbol in the calibration window until it does not blink to make sure that the utility can gather enough data for computation In addition a time line bar is shown in the bottom of the window to indi cate time elapsed If the touchscreen was not touched before the time line bar going to right end the calibra tion task will be terminated automatically 5 Draw Test This function is used for accuracy and performance check Press this button and a new pop up window will be popped up in the location where the touchscreen was mapped to the touch system as below User can press the Clear button to clear the window Press Quit button to terminate this draw test t Caution E Atthefirstassembly of touch screen we suggest applying 25 points calibration E Fora more accurate calibration of touch screen please apply 25 points calibration INCINIODES Copyright 2011 Acnodes Inc All rights reserved Product description and product specifications 14628 Central Blvd are subject to change without notice For latest product information Chino CA91710 please visit Acnodes web site at www acnodes com tel 909 597 7588 fax 909 597 1939 PMH 8064 6 5 open frame monitor 1000 nits high brightness LCD Q VGA DC Power Input rating Input voltage Input range Input current Mo
10. ct due to shipment Removal or installation of the product Causes external to the product such as electric power fluctuation or failure Use of supplies or parts not meeting our specifications Normal wear and tear Any other causes which does not relate to a product defect Removal installation and set up service charges IN Copyright 2011 Acnodes Inc CINODES All rights reserved Product description and product specifications 14628 Central Blvd are subject to change without notice For latest product information Chino CA91710 please visit Acnodes web site at www acnodes com tel 909 597 7588 fax 909 597 1939 PMH 8064 6 5 open frame monitor 1000 nits high brightness LCD 1 2 Before Installation It is very important to locate the LCD Display in a suitable environment The surface for placing and fixing the LCD Display should be stable Make sure the place has good ventilation is out of direct sunlight away from sources of excessive dust dirt heat water moisture and vibration Convenience for connecting the LCD Display to the related facilities should be well considers too 1 3 Unpacking The LCD Display comes with the standard parts shown on the package contents Check and make sure they are included and in good condition If anything is missing or damage contact the supplier immediately 1 4 Optional Accessories 1 Power Cord 1 1 IEC power cord p 1 2 NEMA 5 15 power cord
11. isit Acnodes web site at www acnodes com tel 909 597 7588 fax 909 597 1939 o3 i av 8 ag oy BS PMH 8064 Tr i 6 5 open frame monitor 1000 nits high brightness LCD Be d 2 3 Mounting Method Bracket Mounting x4 pes Mounting bracket M4 50mm screw Remarks hardware for fixing the LCD display is not provided Copyright 2011 Acnodes Inc INCNIODES All rights reserved Product description and product specifications 14628 Central Blvd are subject to change without notice For latest product information please visit Acnodes web site at www acnodes com Chino CA91710 tel 909 597 7588 fax 909 597 1939 PMH 8064 6 5 open frame monitor 1000 nits high brightness LCD Remarks hardware for fixing the LCD display is not provided 75mm VESA Standard INCNODES 14628 Central Blvd Chino CA91710 tel 909 597 7588 fax 909 597 1939 i i e J a8 oa TTD e SORRARAARARRES Remarks Hardware and M4 4 pcs for VESA mouting is not pro vided To avoid damage of internal componenets when mounting the VESA bracket do not use screws that exceed the depth 6mm of the display mounting holes Using screws that are too long may cause damage to the display Copyright 2011 Acnodes Inc All rights reserved Product description and product specifications are subject to change without notice For latest product information please visit Acnodes web site at www a
12. l E 3 E Item Color Support ContrastRatio tye O O Trresponse Timema O a Power Input Max 48 Wet Standby 5 Watt Compatibility Compatibility Multiplatform Mix PGs SUNs IEMs HPs amp DELLs Options DC Power o DC power inputwith 12 24V 48V selection Environmental i astern ins auaton INCINIODES Copyright 2011 Acnodes Inc All rights reserved Product description and product specifications 14628 Central Blvd are subject to change without notice For latest product information Chino CA91710 please visit Acnodes web site at www acnodes com tel 909 597 7588 fax 909 597 1939 PMH 8064 6 5 open frame monitor 1000 nits high brightness LCD JN 5 1 AVIBNC Options C vGA S Video BAC 4 Power Remarks Package includes 1x 6ft S Video cable Copyright 2011 Acnodes Inc INCNIODES All rights reserved Product description and product specifications 14628 Central Blvd are subject to change without notice For latest product information Chino CA91710 please visit Acnodes web site at www acnodes com tel 909 597 7588 fax 909 597 1939 PMH 8064 6 5 open frame monitor 1000 nits high brightness LCD CHAPTER 6 TOUCHSCREEN OPTIONS 6 1 Touchscreen Options USB interface G use 2 VGA Power Serial interface 4 Serial 2 VGA Power Copyright 2011 Acnodes Inc INCNODES All rights reserved Product description and product specifications
13. menu onthe screen or gotothe previous menu AUTO For auto Searching 6 0 0019 l For setting one ortwo input digit A Caution E The Companyresemvesthe rightto modify product specications without Priornotice and assumes noresponsibility forany error which may appear in this web page IN Copyright 2011 Acnodes Inc CNODES All rights reserved Product description and product specifications 14628 Central Blvd are subject to change without notice For latest product information Chino CA91710 please visit Acnodes web site at www acnodes com tel 909 597 7588 fax 909 597 1939 PMH 8064 6 5 open frame monitor 1000 nits high brightness LCD 1 Video Audio out Ss BNC Video Audio in 6 S Video 3 PC Audio in 7 Power VGA INCINIODES Copyright 2011 Acnodes Inc All rights reserved Product description and product specifications 14628 Central Blvd are subject to change without notice For latest product information Chino CA91710 please visit Acnodes web site at www acnodes com tel 909 597 7588 fax 909 597 1939 PMH 8064 6 5 open frame monitor 1000 nits high brightness LCD CHAPTER 10 TROUBLESHOOTING 1 How do I adjust the resolution To change monitor resolution click Start gt Control Panel gt Display Select Setting tab to adjust the monitor resolution in Desktop Area The available resolutions 640 x 480 800 x 600 1024 x 768 1152 x 864 1280 x 1024
14. n p gt Toggle analog digital amp video connection DVI D and video options only 3 2 On Screen Menu Ver GSSSN20SSTOTOt 10242 788 59 8Hz Image Brightness 50 Adjust INCIIODES Copyright 2011 Acnodes Inc All rights reserved Product description and product specifications 14628 Central Blvd are subject to change without notice For latest product information Chino CA91710 please visit Acnodes web site at www acnodes com tel 909 597 7588 fax 909 597 1939 e E H F 14628 Central Blvd Chino CA91710 tel 909 597 7588 fax 909 597 1939 PMH 8064 6 5 open frame monitor 1000 nits high brightness LCD Image To enter into the brightness contrast color temp red green and blue Geometry To enter into the auto adjust H position V position phase and clock Video To enter into the colour tint sharpness noise reduction DCDi and TW Setup Audio To enter into volume bass treble balance AVL and mute Misc To enter into the language OSD position graphic mode ratio reset and timer Copyright 2011 Acnodes Inc All rights reserved Product description and product specifications are subject to change without notice For latest product information please visit Acnodes web site at www acnodes com E ih rs Bi ze sis PMH 8064 Ba 6 5 open frame monitor W 1000 nits high brightness LCD CHAPTER 4 OPERATION 4 1 LCD Specifications fee A Koo
15. nts calibration User should follows the guide to touch and hold the blinking X symbol in the calibration window until it does not blink to make sure that the utility can gather enough data for computation In addition a time line bar is shown in the bottom of the window to indicate time elapsed If the touchscreen was not touched before the time line bar going to right end the calibration task will be terminated automati cally Press the blinking X Symbol until stop blinking 3 Clear and Calibration Press this button to erase the 25 points calibration linearization parameters and force user to do 4 points cali bration again After 25 points calibration data was clear the 4 points calibration data will be invalid It needs to do 4 points calibration 4 Linearization Linearization 25 or 9 points calibration function is used to compensate the touchscreen linearity After lin earization completed the linearity of the touchscreen will be shown in the Linearity curve window IN Copyright 2011 Acnodes Inc CINODES All rights reserved Product description and product specifications 14628 Central Blvd are subject to change without notice For latest product information Chino CA91710 please visit Acnodes web site at www acnodes com tel 909 597 7588 fax 909 597 1939 PMH 8064 6 5 open frame monitor 1000 nits high brightness LCD Pressing this button a new window will be popped up at the location when the touchs
16. s Calibration Tool property page Calibration draw test tools and the linearity curve of the touchscreen were list in this property page shown as below for user to do touchscreen calibration and touch position test Touchkit PS Controller Lidge Conperssbon Gemaal aos Line ai ation Cure d Beaks Dio d points agiriei fo malth ipla Caite Cisa ard Cles ireacrahean pamate and do d porti Caisha ainme PAS Do 9 port irsana bo beba touenn braniti imean Uo d bee bo iasa ha auth paisai Citar Teck User can do calibration or draw test by pressing the function push buttons 1 Linearization Curve Linearization curve of the touchscreen is list in this page for reference and trouble shooting purpose INCINIODES Copyright 2011 Acnodes Inc All rights reserved Product description and product specifications 14628 Central Blvd are subject to change without notice For latest product information Chino CA91710 please visit Acnodes web site at www acnodes com tel 909 597 7588 fax 909 597 1939 PMH 8064 6 5 open frame monitor 1000 nits high brightness LCD 2 4 points calibration It needs calibration before the touchscreen can work accurately Whenever the user feel the accuracy lost user can do Calibration again to get a more accuracy touch function Pressing this button a new window will be popped up at the location when the touchscreen was mapped to area for this touch system to guide the user do 4 poi
17. vic ccoiidsnnurcsatnaaccesrenvecndacia conededincakadiapesiokdandteedadinabiedasaneruedads 15 CHAPTER 7 DC Pow r OO INS siasicctecitciirs sete ceetoreteae piin a EE 18 CHAPTER 8 TV Turner Options 8 1 How to Use Remote CONMONE Y sicccccssscicscdsnisavecesdreasscarsdencasaneeenaeseianndneondeaemedianneasadaveasazaunnanteannean 19 CHAPTER 9 Audio Input Options cccsccccssccceecceceececeececeeceeseacecsaceeensceeseceesaees 21 CHAPTER 10 TroubleShooting cccccccccceeeceeceeeeeeeeaeceeeeeeaeeeansnsesaeoesnensesonansnsaeas 22 CHAPTER 11 Cleaning the LCD Display ccccceccseeeeeeeeeceeeeeeeeeneeeeeeeeneeaes 24 INCNODES Alllohte reserved Product desc iptlon giadiprodueliapecinication Chino CA91710 eee sede We ewe ee om tel 909 597 7588 fax 909 597 1939 PMH 8064 6 5 open frame monitor 1000 nits high brightness LCD CHAPTER 1 INTRODUCTION 1 1 Important Safeguards Please read all of these instructions carefully before you use the device Save this manual for future reference What the warranty does not cover Any product on which the serial number has been defaced modified or removed Damage deterioration or malfunction resulting from Accident misuse neglect fire water lightning or other acts of nature unauthorized product modifi cation or failure to follow instructions supplied with the product Repair or attempted repair by anyone not authorized by us Any damage of the produ
Download Pdf Manuals
Related Search