Liebherr WTB4212
Contents
1. You can change the tempera D ture in the top compartment H Up Down usingthe Up Down buttonson vom FA the left and the temperature in 5 the bottom compartmentusing the Up Down buttons on the right Increasing the temperature Press the Up button Reducing the temperature Press the Down button When pressing one of the buttons for the first time the display will start to flash Pressingthis button again enables you to change the temperature setting The electronic controls will switch over automatically about 5 seconds after the last time you pressed the button and the actual temperature will be displayed Setting range for top compartment 16 C to 18 C Setting range for bottom compartment 5 C to 7 C The temperature setting relates to the centre of e the relevant compartment Ifthe temperature inthe top compartmentis changed the tempera ture progression in the upper section of the interior will change If the temperature in the bottom compartment is changed the temperature progression in the lower section of the interior will change Note Ifthe Light buttonis pressed so thatthe interior lightis permanently lit the temperature in the top section will rise slightly EN Additional functions Inset up mode you cansetthe childlock and adjust the bright ness of the display The child lock is designed to protect the appliance from being switched off accidentally Activating the c2. switch on when the appliance door Light is opened Press the Light button if you want the interior light to be on even when the door is closed Changing the tube Pull out the mains plug Pull the left hand side of the light cover downwards There are notches at the front and rear for this purpose Slide the light cover to the left Remove the light cover downwards Turn the fluorescent tube through 90 and remove it downwards Fit the new fluorescent tube and turn it through 90 Fit the cover and slide it to the right until it engages Labels The appliance is supplied with a label holder with labels for each shelf Use these to label the type of wine stored on each shelf Additional labels can be ob tained from your dealer side Click the label holder into place SVJ and slide the label in from the aa WA Humidifier The righthumidity is vitally importantforthe proper storage of wine Aspecial humidifier increases the humidity in the interior Spread out the supplied lava stones in the appliance s de frost drain gully As you insert the stones ensure that you do not block the drain tube Then fill the defrost drain gully to the top of the drain tube with water In normal operation the lava stones are kept moist by the defrost water in the appliance If the humidity at the place of installation is high you ma
3. Operating instructions Pageio AA Wine cooler Lin ak aS aK ne 7083 589 01 WT 10 Disposal notes The appliance contains reusable materials and should be disposed of properly not simply with unsorted household refuse Appliances which are no longer needed must be disposed of in a professional and appropriate way in accordance with the current local regulations and laws When disposing ofthe appliance ensure thattherefrigerantcircuit is not damaged to prevent uncontrolled escape of the refrigerant it contains data on type plate and oil e Disable the appliance e Pull out the mains plug e Cut through the connection cable Z warnine Danger of suffocation due to packing material and plastic film Do not allow children to play with packaging material Take the packaging material to an official collection point Climate rating The climate rating indicates the room temperature at which the appliance may be operated in order to achieve full refrig eration performance Klasse Class Classe Clase The climate rating is indicated on the type plate The position of the type plate is shown in the section entitled Description of the appliance Climate rating Room temperature SN 10 C to 32 C N 16 C to 32 C ST 16 C to 38 C T 16 C to 43 C SN ST 10 C to 38 C SN T 10 C to 43 C Do not operate the appliance outside the specified room temperature r
4. ange Description of the appliance Operating and control elements Interior light Fluorescent tube Grid shelves Note Fit the short grid shelf in the top position only 50 Activated charcoal filter Adjustable height feet Safety instructions and warnings e To prevent injury or damage to the unit the ap pliance should be unpacked and set up by two people e In the event that the appliance is damaged on delivery contact the supplier immediately before connecting to the mains e To guarantee safe operation ensure that the ap pliance is set up and connected as described in these operating instructions e Disconnect the appliance from the mains if any fault occurs Pull outthe plug switch off or remove the fuse e When disconnecting the appliance pull on the plug not on the cable e Any repairs and work on the appliance should only be carried out by the customer service department as unauthorised work could prove highly dangerous for the user The same applies to changing the mains power cable e Do not allow naked flames or ignition sources to enter the appliance When transporting and cleaning the appliance ensure thatthe refrigerant Circuit is not damaged In the event of damage make sure that there are no ignition sources nearby and keep the room well ventilated e Do not stand on the plinth drawers or doors or use them to support anything else e T
5. diators and similar sources of heat e The floor on which the appliance stands should be horizontal and level Compensate for uneven floors with the adjustable feet e Donotcover ventilation openings or grille e Standard EN 378 specifies that the room in which you install your appliance must have a volume of 1 m per 8 g of R 600a refriger ant used inthe appliance so as to avoid the formation of inflammable gas air mixtures in the room where the appliance is located in the event of a leak in the refrigerant circuit The quantity of refrigerant used in your ap pliance is indicated on the type plate on the inside of the appliance e Always install the appliance directly against the wall Appliance dimensions 1650 mm mp Electrical connection Only operate the appliance with alternating current AC The permissible voltage and frequency are indicated on the type plate The position ofthe type plate is shown inthe section entitled Description of the appliance The socket must be properly earthed and protected by a fuse The tripping current of the fuse must be between 10 A and 16 A The socket must not be situated behind the appli ance and must be easily accessible Do not connectthe appliance using an exten sion cable or extension socket Do not use stand alone inverters conversion of direct current to alternating current three phase current or energy saving
6. eter show the correct reading Is the ventilation system working properly Is the appliance set up too close to a heat source If none of the above causes apply and you cannot rectify the fault yourself contact the nearest customer service de partment stating the type des ignation service number and appliancenumber as indicated on the type plate XXX 9999 Index 99 X 999 1 Service 4 Kar Rom Pipe i En Are A go 3 kg 24h CE H 99 999 999 9 The position of the type plate is showninthe section entitled Description of the appliance Changing over door hinges Door hinges should only be changed by a trained expert Changing the door hinges must be done by two people 1 Remove screw from lower hinge bracket 2 Open the door approx 45 and lift upwards Important As a result of its heavy weight the door must be raised and removed by one person while the other executes the intermediate steps 3 Push the pin upwards using your fingertip 4 Pull the door to the front and remove it downwards 5 Transfer plug 6 Transfer door handle and plugs to the other side 7 Unscrew the pin Use the spanner provided 8 Transfer the covers to the opposite side 9 Screw in the pin on the opposite side t 14 Locate the door on the upper pin as Important Asaresultofits heavy weight the door must be held sec
7. hild lock Press 3 7 for5 seconds Display Light 3 7X Display z Light EN Display Up 3 ZX Display Light 3 Display On Off Deactivating the child lock Press 5 7x for5 seconds Display Light 3 ZX Display Light 3 V Display a Down Tel Display NE Light 3 Display On Off 13 14 Additional functions Adjusting the display brightness Press 3 7 for 5 seconds Display Light E Display Up Fe Display Ss Light Use buttons and to select the desired setting h1 minimum brightness h5 maximum brightness The adjusted brightness will be activated after one minute Note If a button is pressed the display lights up for one minute at maximum brightness When commissioning the appliance the adjusted brightness will only be active once the set interior temperature of the appliance has been reached Demo mode Demo mode can be activated for presenting the appliance at exhibitions orin salesrooms as though in normal operating mode When in this mode the cooling circuit is switched off If this mode is activated by accident it can be deactivated as detailed below Press 3 7X 3 for 5 seconds Light On Off Display The refrigeration unit switches on The temperature display flashes The appliance is now in normal operating mode Interior light The interior light will always
8. his appliance can beused by children of 8 years old and over and also by persons with restricted physical sensory or mental capacity or lack of experience and knowledge ifthey are supervised or have been instructed on safe use of the appli ance and understand the resulting risks Children must not be allowed to play with the appliance Cleaning and user maintenance must not be carried out by children without supervision e Avoid prolonged skin contact with cold surfaces or chilled frozen food This could cause pain numb ness and frostbite In the case of prolonged skin contact protective measures should be taken e g gloves should be worn e Do not consume food which has been stored for too long as it could cause food poisoning e Do not store explosives or sprays using com bustible propellants such as butane propane pentane etc in the appliance Electrical com ponents might cause leaking gas to ignite You may identify such sprays by the printed contents or a flame symbol e Do not use electrical appliances inside the ap pliance e If you have a lockable appliance do not keep the key nearthe appliance or within reach of children e The appliance is designed for use in enclosed areas Do not operate the appliance outdoors or in areas where it is exposed to splash water or damp conditions e The fluorescenttube illuminates the interior of the appliance It is not suitable for lighting a room Range of appliance u
9. id cleaners or chemical solvents e Useaglasscleanertoclean the glass surfaces andacommercially available stainless steel cleaning agent for the stainless steel surfaces Do not use steam cleaners because of the risk of injury and damage e Ensure that no cleaning water penetrates into the electrical components or ventilation grille e Do not damage or remove the type plate on the inside of the appliance It is very important for servicing purposes Malfunctions e F1 or F3 appears in the display The appliance has suffered a fault Contact the customer service department You may be able to rectify the following faults by checking the possible causes yourself Appliance does not function Is the appliance switched on Is the plug correctly fitted in the mains socket Is the fuse intact When inserting the mains plug the refrigeration unit does not switch on but a value is shown in the temperature display Demo mode is activated Deactivate demo mode as described in the section entitled Additional functions Demo mode e Loud running noise Is the appliance set up firmly on the floor Does the appliance cause nearby items of furniture or objects to vibrate Please note that noises caused by the refrigerant circuit cannot be avoided The temperature is not low enough Isthe temperature setting correct see Settingthe temperature Does the separately installed thermom
10. m button The temperature display will stop flashing as soon as the tem perature in the interior has reached the set value Temperature alarm after a fault in the appliance If the appliance develops a fault the temperature in the interior may rise too high or fall too low The audible warning signal will sound and the temperature display will flash Ifthe temperature displayedis too high warm first check whether the door is closed correctly Ifthe temperature display continues to show a value thatis too high ortoolow after one hour contactthe customer service department e Cancel the audible warning signal by pressing the Alarm button If F1 or F3 appears in the display the appliance has suffered a fault In this case contact the customer service department Multi temperature wine cooling Insert the grid shelves into the appliance as shown in the illustration Insert the short grid shelf with a depth of 450 mm in the topmost position see section entitled Descrip tion of the appliance With this multi temperature wine cabinet you can cool wines to the perfect temperature for drinking The lowest compartment has the lowest tempera ture The temperature rises steadily up to the top com partment Store the different types of wine in the various compartments Red wines lt Ros wines White wines Sparkling wines Prosecco Champagne Setting the temperature
11. plugs Risk of damage to the electronic control system Operating and control elements PY pa On Off Up Down Alarm Light Up Down Upper compartment temperature display Lower compartment temperature display Upper compartment temperature setting buttons Lower compartment temperature setting buttons On Off button Audible warning On Off button Child lock activated symbol Interior light On Off button Switching the appliance on and off Switching the appliance on Press the On Off button until the temperature display lights up On Off Switching the appliance off Keep the On Off button pressed for approx 3 seconds so that the temperature display goes out Door open alarm If the door is left open for more than 60 seconds the audible warning signal will sound If the door must be opened for a lengthy period to place items into the appliance cancel the audible warning signal by pressing the Alarm button Alarm The alarm switches back to standby whenthe dooris shut Temperature alarm If the temperatures in the interior are out of the per mitted range the audible warning signal will sound and the temperature display will flash After a lengthy power failure the temperature in the interior may have risen to too high a level After the power supply returns the fall in temperature can be watched on the display e Cancel the audible warning signal by pressing the Alar
12. se The appliance is suitable solely for storing wine in a domestic environment or similar This includes for example use in staff kitchenettes bed and breakfast establish ments by guests in cottages hotels motels and other forms of accommodation incatering and similar services in the wholesale trade Use the appliance solely as is customary within a domestic envi ronment All other types of use are inadmissible The appliance is not suitable for storing and cooling medicines blood plasma laboratory preparations or similar substances and products cov ered by the 2007 47 EC Medical Devices Directive Any misuse of the appliance may result in damage to or spoilage of stored goods Furthermore the appliance is not suitable for operation in potentially explosive atmospheres Saving energy Always ensure good ventilation Do not cover ventilation open ings or grille Always keep fan louvres clear Do not place appliance in areas of direct sunlight or next to a stove heater or similar object The energy consumption depends on the installation conditions e g the ambient temperature Keep the time the appliance is open to a minimum Accumulated dust increases the energy consumption Once a year dust the refrigerating unit together with the metal grille of the heat exchanger at the back of the appliance 11 12 Setting up e Avoid positioning the appliance in direct sunlight or near cookers ra
13. ure by one person 15 Lift the door upwards and turn the 10 Unscrew hinge bracket 11 Remote the cover turn it through 180 and re fit it on the opposite side 12 Screw hinge bracket into place 13 ne 13 Insert the pin into the left hand door mounting Use your index finger to hold the pin while you are as sembling the door shown in the illustration and guide it to the lower hinge bracket pin until it fits into the bore hole of the hinge bracket Slowly lower the door downwards The lower part of the pin must be fully engaged in the bore hole of the hinge bracket 16 Screw the screw into the pin again and tighten Adjusting the lateral tilt of the door If the door is at an angle adjust the angle 17 Remove middle screw from hinge bracket This screw is no longer needed 18 Undo screws and slide hinge bracket to the right or left Tighten screws Shutting your appliance down If your appliance is to be shut down for any length of time switch it off and disconnect the plug or switch off or unscrew the fuse Clean the appliance and leave the door open in order to prevent unpleasant smells The appliance complies with the relevant safety regulations and EC Directives 2004 108 EC and 2006 95 EC
14. y expect that the humidity in the appliance will be raised This may result in the labels peeling Depending on the type of label adhesive this may result in slight mould formation This can be rectified by carefully cleaning any adhesive residues off the bottles Air exchange with activated charcoal filter The way in which wines continue to mature depends on the ambient conditions The quality of the air is therefore decisive for preserving the wine We recommend that you replace the illustrated filter once a year Filters can be obtained from your dealer Changing the filter Take the filter by the handle Turn it 90 to the left or right and remove Inserting the filter Insert with the handle in a vertical position Turn it 90 to the left or right until it clicks into place Storage diagrams for 750 ml Bordeaux bottles this configuration A Important The maximum load per grid shelf is 60 kg Number of bottles CPR arate OOO 33 YX X X X LLC COOOL Son 33 33 Ge 0008 C 36 CHAT SEE Total 200 bottles Thestoragecapacitystatedis only possible with the grid shelves in 16 Cleaning Before cleaning always switch off the appliance Pull out the mains plug or switch off or unscrew the fuse e Clean the inside and outer walls with lukewarm water and a lit tle detergent Do not use abrasive or ac
Download Pdf Manuals
Related Search