Balance HE-CLOCK-84
Contents
1. e Press WAVE button B4 to stop scanning when receiving DCF time signal flashes indicate now 1s receiving DCF time signal e turns on indicate signal received successfully e DST s shown on the LCD f it is n Daylight Saving Time mode Manual Time Setting e Hold SET button B1 for 3 seconds to enter Clock Calendar setting Mode e Press A 12 24 B2 or Y CIF B3 buttons to adjust the setting and press SET button B1 to confirm each setting e The setting sequence is shown as follow Hour Minutes Second Year Month Day sequence Month Day Time Zone Day of week language e 5 languages can be selected in Day of week they are German English Spanish Italian and French The languages and their selected abbreviations for each day of the week are shown in the following table German GE 50 MO or ha po fe sao e The zone is used for the countries where can receive the DCF signal but the time zone is different from the German time e When the country time is faster than the German time for 1 hr the zone should be set to 1 Then the clock will automatically set 1 hour faster from the signal time received 12 24 Hour Display mode e Press La 12 24 button B2 to select 12 or 24 hours mode Thermometer e Press Y CIF button B3 to select Temperature to be displayed in Celsius mode or Fahrenheit mode Note e Usea pin to press the buttont B62. Item 866433 BALANCE Feature e Radio controlled time with manual setting option e Temperature measuring range 0 C 50 C e Humidity measuring range 20 99 e Perpetual Calendar Up to Year 2069 e 12 24Hour time display selectable e Day of week in 5 Languages Selectable e Solar power supply e Size 280X190X24 mm Main Unit Appearance Front View Back View Part A LCD A1 Radio Controlled Time A2 Temperature and Humidity display A3 Radio Controlled Icon A4 Date and Day of week display Part B Buttons B1 SET button BZ A 12 24 button B3 Y CIF button B4 WAVE button B5 POWER ON OFF slide switch Part C Structure C1 Solar Powered panel C2 Wall Mount Hole C3 Stand Start up Push the POWER ON OFP B5 slide switch to on the unit Radio Controlled Clock A e After start up the clock will scan the DCF time signal gt flashes on the LCD Buttons will not function while scanning for DCF unless they are well received or stopped manually e The clock automatically scans the time signal at 3 00 a m everyday to A Eon maintain accurate timing For failed reception scanning stops gt onthe LCD disappear and repeats again at 4 00 a m 5 00a m and 6 00a m e The clock manually scans the DCF time signal by holding WAVE button B4 ix for 3 seconds For failed reception scanning stops A onthe LCD disappear
3. to reset the unit if it does not work properly e Avoid placing the clock near interference sources metal frames such as computer or TV sets e Buttons will not function while scanning for DCF time signal unless they are well received or stopped manually e All Setting Mode will automatically exit in 15 seconds without any adjustment
Download Pdf Manuals
Related Search