Havis C-TCB-24 car kit
Contents
1. ar T 800 524 9900 F 215 957 0729 Productivity in motion aiaia HAVIS Sole ol 00108 INSTALL INSTRUCTIONS C TCB 24 1999 2006 FORD EXCURSION amp 1999 2013 F 250 F 350 F 450 F 550 PICKUP TOOLS REQUIRED Torx Bit Set T 55 3 8 Ratcheting Wrench 3 16 Allen wrench Powered drill 3 8 Standard Socket Set 3 16 amp 5 16 Drill bits 3 8 Metric Socket Set Open end wrench set COMPONENTS amp HARDWARE ITEM QTY DESCRIPTION PART l l Pole Support Assembly CM93071 24 2 l Passenger side mount Assembly CM93072 3 3 1 Lateral Brace Arm CM93338 4 2 5 16 Hex nut GSM30007 5 1 5 16 Nylock Nut GSM30017 6 6 5 16 Flat Washer GSM31006 7 2 5 16 Lock Washer GSM3 1027 8 1 5 16 18 x 1 Hex Head Bolt GSM33012 9 2 5 16 18 x 1 44 Hex Head Bolt GSM33013 10 2 14 x 34 Hex head lag bolt GSM33060 1 Passenger side S mount Assembly Factory seat bolt Factory seat bolt C TCB 24_INST_6 09 Always gt Read all instructions before installing any Havis Inc products gt Check for obstructions Wire brake lines fuel tank etc before drilling any holes gt Use hardware provided with install kit INSTALLATION Remove front passenger seat bolts Loosen but do not remove rear bolts Note When installing C TCB 24 into Extended Cab or Crew Cab pick ups the air duct on the passenger side floor must be cut out or completely removed to install Slide base of the pole support assembly under the sea2. t base brackets Align the holes of the seat base the pole support assembly and floor holes Replace front seat bolts Firmly tighten all seat bolts without over tightening Attach lateral brace arm assembly to the pole support assembly with 5 16 x 1 Hex head bolt washer and nylock nut Secure lateral brace arm to side of the transmission hump using 4 x 34 Hex head lag bolts Note When mounting side support brace to floor of vehicle be sure to check for obstructions prior to drilling or lag bolting to floor Tighten the screw that attaches the brace arm to the pole support assembly last Tighten down factory passenger seat bolts and 5 16 18 nylock nut holding side support brace to pole support assembly Mount optional C 3090 computer mounting platform to passenger side mount assembly using hardware and instructions provided with C 3090 C TCB 24_INST_6 09
Download Pdf Manuals
Related Search