Melitta Caffeo Barista TS
Contents
1. My Coffee 6 2 76 Changing default settings You can change the following default settings depending on beverage Coffee amount in millilitres Froth amount in millilitres Milk amount in millilitres Hot water amount in millilitres Beans bean chamber 1 or 2 Coffee strength very mild mild normal strong very strong Temperature low normal high E Information The default settings remain valid until they are changed again Changing the beverage settings is similar for all beverages Changing the coffee strength for an espresso is described here as an example Direct keys Espresso Coffee strength Strong Confirm with OK Fig 17 Setting the coffee strength Requirement The ready symbol appears on the display 1 Press the menu ok button for 2 seconds The menu appears on the display 2 Navigate to the Direct keys gt Espresso gt Coffee strength menu 3 Use the arrow buttons to select the desired coffee strength and confirm with menu ok 4 Repeatedly select the Exit command to exit the menu The ready symbol appears on the display The selected coffee strength is used the next time an espresso is pre pared Personal settings My Coffee The My Coffee function enables you to save personal beverage settings and assign them to a user Personal settings My Coffee 7 1 Editing personal user profiles Up to four user pro2. Requirement The ready symbol appears on the display and milk is con nected 1 Place a vessel beneath the outlet 2 Press the My Coffee button until the desired user is shown on the display 3 Press the Cappuccino button The grinding process and coffee dispensing start Coffee dispensing is ended automatically Milk dispensing begins Beverage dispensing is ended automatically 4 Remove the vessel Easy Cleaning OK for start appears in the display 5 You can execute the Easy Cleaning programme or prepare further bev erages a Execute the Easy Cleaning programme Follow the instructions on the display Information on this is available in chapter 9 4 Easy Cleaning programme on page 87 b Prepare further beverages The ready symbol appears on the display E Information To exit the My Coffee function press the My Coffee button until the ready symbol appears If you do not prepare a beverage within 3 minutes the appliance auto matically switches to the ready symbol 79 Changing basic settings 8 Changing basic settings Operating steps which change the appliance s basic settings are described in the following chapter 8 1 Setting the language You can set the display text language Requirement The ready symbol appears on the display 1 Press the menu ok button for 2 seconds The menu appears on the display Navigate to the Language menu U
3. The use of unsuitable cleaning agents may lead to scratched surfaces Do not use any abrasive cloths sponges or cleaning agents Requirement The appliance is switched off Clean the outside of the appliance using a soft damp cloth and normal washing up liquid Rinse the drip tray and the coffee grounds container using a soft damp cloth and normal washing up liquid Clean the bean container using a soft dry cloth 85 Care and maintenance 92 9 3 86 Rinsing the coffee system During rinsing the nozzles at the outlet and the internal parts of the coffee system are rinsed As a result rinsing water from the interior enters the drip tray When switching on and off the appliance rinses the coffee system Rinsing can also be carried out manually Requirement The ready symbol appears on the display 1 Place a vessel beneath the outlet 2 Press the menu ok button for 2 seconds The menu appears on the display 3 Navigate to the Care gt Rinsing menu 4 Use the arrow buttons to select Start and confirm with menu ok The coffee system is rinsed The ready symbol appears on the display Cleaning the brewing unit To avoid damage to the appliance we recommend cleaning the brewing unit once a week Fig 22 Removing the brewing unit Requirement The appliance is switched off 1 Open the cover 10 To do this reach into the recess on the right of the appliance and p
4. Keep the packaging material for transport and possible return ship ments E Information The appliance may contain traces of coffee and water The appliance has been tested in the factory to ensure that it functions perfectly Checking the delivery contents Check the completeness of delivery using the following list If parts are missing contact your retailer Coffee spoon with screw in aid for the water filter Milk hose or milk container including milk hose depending on model Cleaning brush Coffee system cleaning agent Milk system cleaning agent Descaling agent Water filter Test strip for determining the water hardness 59 First steps 3 3 3 4 3 5 60 Positioning the appliance Observe the following instructions Do not position the appliance in damp rooms Position the appliance on a stable flat and dry surface Do not position the appliance in the vicinity of sinks or the like Do not position the appliance on hot surfaces Position the appliance a sufficient distance approx 10 cm away from the wall and other objects The space above the appliance should be at least 20 cm Route the power cable so that it cannot be damaged by edges or hot surfaces Connecting the appliance Observe the following instructions Check that the supply voltage matches the operating voltage specified in the technical data see table Technical data on page 95
5. Only connect the appliance to a properly installed earthing contact socket If in doubt consult a specialist electrician The socket must be fused with at least a 10 A fuse Switching the appliance on for the first time During initial starting up you can set the language the time and the water hardness The settings can be changed at a later point in time see chap ter 8 Changing basic settings on page 80 and chapter 9 8 Setting the water hardness on page 91 Use the enclosed test strip to determine the water hardness Observe the instructions on the test strip packaging and in table Water hardness range on page 95 E Information We recommend pouring away the first two cups of coffee after initially starting up Basic operation 4 1 Requirement The appliance has been positioned and connected 1 Place a vessel beneath the outlet 2 Switch the appliance on with the ON OFF button The welcome display appears on the display The request to carry out set up appears on the display Please set up the machine The menu ok button flashes 3 Confirm with menu ok The Language menu appears 4 Select your language with the arrow buttons Confirm with menu ok The Clock menu appears 5 Select the hour and minutes with the arrow buttons Confirm each set ting with menu ok The Water hardness menu appears 6 Select the determined water hardness range with the arrow buttons or
6. Information Store the filled milk container in the refrigerator Connecting the milk hose depending on model Fig 13 Connecting the milk hose to the appliance 1 Push the outlet 6 down 2 Connect the milk hose 36 to the connection at the outlet 14 3 Insert the milk hose into a conventional milk pack 38 69 Basic operation 4 9 70 Emptying the drip tray and coffee grounds container When the drip tray 8 and the coffee grounds container 7 are full the appliance requests you to empty them The projecting float 17 also indi cates that the drip tray is full Always empty both containers 17 Fig 14 Drip tray coffee grounds container and float Pull the drip tray 8 forwards out of the appliance Remove the coffee grounds container 7 and empty it Empty the drip tray Insert the coffee grounds container Push the drip tray into the appliance to stop ler cea ea E Information The appliance requests you to empty the drip tray and the coffee grounds container after a defined number of beverages have been dispensed If you empty the containers whilst the appliance is switched off it does not register this process It may therefore occur that you are requested to empty the containers even though the drip tray and the coffee grounds container are still full Preparing beverages There are three options for preparing beverages Standard dispen
7. The appliance switches off Transporting the appliance ATTENTION Freezing remaining water may damage the appliance Prevent the appliance from being exposed to temperatures below 0 C E Information Transport the appliance in the original packaging This avoids damage in transit Before transporting the appliance carry out the following activities 1 Vent the appliance see chapter 11 1 Venting the appliance on page 94 Empty the drip tray and the coffee grounds container Empty the water tank Empty the bean container Clean the appliance see chapter 9 1 General cleaning on page 85 Secure loose parts cup plate etc with suitable adhesive tape Package the appliance NONE BD Technical data 11 3 Disposing of the appliance Appliances marked with this symbol are subject to European Directive 2002 96 EC for WEEE Waste Electrical and Electronic Equipment mem Electrical appliances do not belong in domestic waste Dispose of the appliance in an environmentally friendly manner via suitable collection systems 12 Technical data Technicaldata O O Operating voltage 220 V to 240 V 50 Hz Power consumption Max 1 450 W Pump pressure Static max 15 bar Dimensions Width 255 mm Height 365 mm Depth 465 mm Capacity Bean container 2x135g Water tank 1 81 Weight empty 10 5 kg Ambient conditions Temperature 10 C to 32 C Relative humidity 30 to
8. 4 1 Switching the appliance on and Off unessseennseeennnsserennnnsereennnserennnn 61 4 2 Using the control panel snseonnssenonnesesnennssennonnessssennnsseneonnessssennnsseneenner 62 4 3 Navigating in the menu ssseonssernonnesssnennnssennonnessssennnssennonnesersennnsseneenner 63 44 Filling with coffee beans and using Bean Select 65 4 5 USING ground coffee se ssssmsmsmmsmsssssmmmessms 66 4 6 Filling in water 67 4 7 Adjusting THE Outlet cssseccscssssssccsssansdsvscessscciusscectesansuecccsaseddesasensnsccassschessneasnescansess 68 48 Using MUI K saa csisicctsastvssedssisacenntentiecocsonesesscensasesbdonavenstantidssceonsossenininesssinisssoberdsaacsdboases 68 4 9 Emptying the drip tray and coffee grounds container 70 5 Preparing beverages nennen 71 5 1 Preparing espresso and Caf Cr me csesesssscssssecssssecessecessccesnecesseeeessseessaes 71 5 2 Rreparing EAP PUCENNO ci essssssessicsnasdessisderssonsrsnrsiieressnsssnarens tetiersnunsieve nn 71 5 3 Prep ringilatt miacCNiatOus ssiweeocsamisssuivsissssssesisssiisssss ssstassstissssnsrenrnensstkrnsen 72 5 4 Preparing milk froth and warm milk 72 5 5 Preparing hot water asnsensseenssssenssenenssssunnssnunesssennsssunnsssannse 73 5 6 Changing beverage settings before and during preparation 73 5 7 Stopping beverage preparation ssssssssssessssssssassrsrsrsrssnrosssrrsnsrnrsnnrrr 74 5 8 Preparing
9. Care gt Cleaning menu Use the arrow buttons to select Start and confirm with menu ok 4 Follow the further instructions on the display up to the end of the clean ing programme w The ready symbol appears on the display 89 Care and maintenance 9 7 90 Descaling programme The descaling programme is used to remove limescale deposits in the inte rior ofthe appliance using coffee machine descaling agents To avoid damage to the appliance we recommend carrying out the descal ing programme every 3 months or as requested by the appliance The descaling programme takes approximately 25 minutes and should not be interrupted dk CAUTION Contact with descaling agent may lead to eye and skin irritation Observe the processing instructions on the descaling agent packaging ATTENTION Use of unsuitable descaling agents may damage the appliance Use Melitta ANTI CALC Espresso Machines liquid descaling agent exclu sively ATTENTION A water filter may be damaged if it is screwed in during the descaling programme Remove the water filter before starting the descaling programme see chapter 9 9 Using a water filter on page 91 Place the water filter into a vessel filled with tap water during the desca ling programme The water filter can be reinserted and reused on completion of the des caling programme Requirement The ready symbol a
10. and by persons with reduced physical sensory or mental capabilities or a lack of experience and knowl edge if they are supervised or have been instructed in using the appliance safely and understand the result ing risks Children must not play with the appliance Cleaning and maintenance must not be undertaken by children younger than 8 years of age Children over 8 years of age must be supervised during cleaning and mainte nance Disconnect the appliance from the power supply when it is left unsupervised for a long time 55 Overview of the appliance 2 2 1 56 Overview of the appliance Overview of the appliance Fig 1 our WN N Front left of the appliance Water tank 2 chamber bean container Ground coffee chute Cup rest Control panel Height adjustable outlet with 2 coffee nozzles 2 milk nozzles 1 hot water nozzle cup illumination Coffee grounds container inner Drip tray ON OFF button Overview of the appliance Fig 2 10 11 12 13 14 15 16 17 Front right of the appliance Cover Grinding fineness adjustment lever behind the cover Power cable with cable insert compartment Brewing unit behind the cover Milk hose connection at the outlet can be converted to left side Milk hose connection at the drip tray possible on both sides Cup plate Float 57 Overview of the applianc
11. on the display Information on this is available in chapter 9 4 Easy Cleaning programme on page 87 71 Preparing beverages Preparing beverages b Prepare further beverages The ready symbol appears on the display 5 3 Preparing latte macchiato Requirement The ready symbol appears on the display and milk is con 2 nected 1 Place a vessel beneath the outlet 2 Press the Latte macchiato button Milk dispensing begins Milk dispensing is ended automatically The grinding process and coffee dispensing start Beverage dispensing is ended automatically 3 Remove the vessel Easy Cleaning OK for start appears in the display 4 You can execute the Easy Cleaning programme or prepare further bev erages a Execute the Easy Cleaning programme Follow the instructions on the display Information on this is available in chapter 9 4 Easy Cleaning programme on page 87 b Prepare further beverages The ready symbol appears on the display 5 4 Preparing milk froth and warm milk The preparation of milk froth and warm milk is similar ma Requirement The ready symbol appears on the display and milk is con A nected 1 Place a vessel beneath the outlet 2 Press the Milk froth milk button a Milk froth press button briefly b Warm milk press button for longer 2 seconds Milk dispensing begins Beverage dispensing is ended automatically 3 Remove the vessel E
12. point in time E Information If the duration and point in time are activated simultaneously the appliance switches off after the event which occurs first Setting the duration for Auto OFF Requirement The ready symbol appears on the display 1 Press the menu ok button for 2 seconds The menu appears on the display 2 Navigate to the Auto OFF gt OFF after menu 3 Use the arrow buttons to select a time and confirm with menu ok 4 Repeatedly select the Exit command to exit the menu The ready symbol appears on the display ET Information Auto OFF cannot be deactivated completely After 8 hours without being operated at the latest the appliance switches off 81 Changing basic settings 8 5 82 Setting the point in time for Auto OFF The OFF time point is deactivated as default in the factory Requirement The ready symbol appears on the display 1 Press the menu ok button for 2 seconds The menu appears on the display 2 Navigate to the Auto OFF gt OFF at menu 3 Use the arrow buttons to select the hours and minutes Confirm each setting with menu ok 4 Repeatedly select the Exit command to exit the menu The ready symbol appears on the display E Information If you want to deactivate Auto OFF set the OFF time point to 00 00 Setting energy save mode Energy save mode lowers the heating temperature and switches off th
13. two beverages simultaneously s sssssmsmmsmsmmssmmsms 74 6 Permanently changing beverage settings 75 61 Selecting recipes iieii keni E aE 75 6 2 Changing default settings sssescccsecssssecssssescseccsseesccsseessneeesasecessseeesneeessaes 76 5 Table of contents 10 11 12 52 Personal settings My Coffee oss 76 7 1 Editing personal user profiles s ssss sissesssssssssssssssssssnssrisssssssossnsnsssessssssnsssne 77 7 2 Selecting changing personal settings s ssssmmmmsmmmmssmmssms 78 7 3 Preparing beverages with personal settings sssw sssmmsmmmmssmmmm 79 Ch angmsibasiesetings naar 80 8 1 Setting the language uunnmseennnsseeennnssseennnnsseeennunssennnnnssesennunsesennnnssesennunseren 80 82 SOCEM TIME TUS sriain iii 80 8 3 Activating deactivating Auto Bean Select 81 84 Setting AUTO OF Pssssscssascasscsssscescnsssvecsvosseccutsassnusscensosctosasondsosevovsconsissecobssaseisearizessest 8 5 Setting energy save mode 8 6 Resetting the appliance to the factory settings 83 8 7 Displays in the System MENU s ssessssssssssrssssoossssosrsssnsrssornnssrnnssornrnronnnnnrnnnnnnnnn 83 8 8 Setting the Grinding FINENESS eessssseeessecssseeseecsssssecsssesecensseeeessnseeseeenseeeeees 84 8 9 Converting the connection for the milk hose unneemmeeennnseeennnnneeen 85 Cara andimaintenane amp euere 85 9 1 GON Kal CLEANING isisisi aiins 85 9 2 Ri
14. with OK Fig 6 Example display with buttons Use the following options to navigate in the menu 63 Basic operation 64 Calling up the menu and confirming the selection HEIM Press the menu ok button for longer than 2 seconds to call up the AS menu Press the menu ok button briefly to confirm your selection Navigating in the menu IN Press the arrow buttons to navigate down or up in the menu Hold an arrow button down to quickly switch to the menu options Exiting a menu Select the command Exit with the arrow buttons and confirm with menu ok to exit a menu Exit sub menus which only display information and in which you do not carry out any settings with menu ok Calling up sub menus Certain of the appliance s functions are reached by calling up several sub menus in succession Sub menus are always called up in a similar manner Navigation to the Descaling programme is described here as an example Care Exit Rinsing Easy cleaning Cleaning milk system Cleaning coffee system gt Descaling Filter Fig 7 Navigating to the Descaling programme 1 Press the menu ok button for 2 seconds The menu appears on the display 2 Use the arrow buttons to select Care and confirm with menu ok 3 Use the arrow buttons to select Descaling and confirm with menu ok The selection of functions is always shown in shortened form in these oper ating instructions Navigate to the Care g
15. 80 non condensing Soft 0 to 7 2 Oto 13 Medium 7 2 to 14 13 to 25 Hard 14 to 21 2 25 to 38 Very hard gt 21 2 gt 38 Espresso Beverage amount 40 ml Bean type 1 Coffee strength Strong Brewing temperature Normal Caf creme Beverage amount 120 ml Bean type 2 Coffee strength Strong Brewing temperature Normal Technical data Cappuccino Beverage amount 130 ml Bean type 1 Coffee strength Strong Brewing temperature Normal Latte macchiato Beverage amount 190 ml Bean type 1 Coffee strength Strong Brewing temperature Normal Milk Froth amount 120 ml Milk amount 120 ml Hot water Beverage amount 120 ml 96 97 Melitta Europa GmbH amp Co KG Division Household Products Ringstr 99 D 32427 Minden Germany www melitta de Editorial department ZINDEL AG www zindel de Mel 002 1v2 1 0 2013 06 0370 0513
16. YP Bedienungsanleitung Operating Instructions Naa BARISTA f i Technische Daten DEUTSCH 50 Cappuccino Getr nkemenge 130 ml Bohnensorte 1 Kaffeest rke Stark Br htemperatur Normal Latte Macchiato Getr nkemenge 190 ml Bohnensorte 1 Kaffeest rke Stark Br htemperatur Normal Milch Schaummenge 120 ml Milchmenge 120 ml Hei wasser Getr nkemenge 120 ml Table of contents Table of contents 1 For your safety rauen N E 53 1 1 Symbols used 93 1 2 Proper use 34 1 3 Danger due to electrical current 54 1 4 Risk of burning and scalding ussseemseennnseeeennenseeennenssenennensernennnnserenn 55 1 5 GeMer al SALLY E E AE 55 2 Overview oftheapplianee sine 56 2 1 Overview of the appliance snennsenonesseonennersennennssennennersensennssernennerseneen 56 2 2 Overview of the control panel ssssenennnsseeennensseennunsserennunserenmunsetnnn 58 3 First STO PS noii ee 59 3 1 Unpacking the appliance usennseeonenseonennersennonnsseonennerseneonnsseenennerteneen 59 3 2 Checking the delivery CONtentS s s 2 sss sssssssssissssssssesonsssssnsssnsnssnrsnissnnsnnser 59 3 3 Positioning the appliance unsnensennonesseonennersennennssennennersensonnssernennsrteneen 60 3 4 Connecting the appliance sssini 60 3 5 Switching the appliance on for the first time s sssmmessmmssmmmsmm 60 4 BASE OPERATION nu ea een 61
17. asic operation 4 5 66 E Information The grinder is emptied during each grinding process Minimal coffee type mixing may nevertheless occur Empty grinding causes a different type of noise and is normal Using ground coffee You may also use ground coffee to prepare coffee beverages ATTENTION The use of unsuitable types of coffee may lead to brewing unit clogging Do not use any instant products Filla maximum of one coffee spoon of ground coffee into the ground coffee chute Fig 9 Ground coffee chute 1 Open the lid of the ground coffee chute 3 2 Use the enclosed coffee spoon for dosing Fill a maximum of one coffee spoon of ground coffee into the ground coffee chute 3 Close the lid of the ground coffee chute 4 Proceed as described in chapters 5 to 7 E Information Two cup dispensing is not possible when using ground coffee If you do not prepare any coffee within 3 minutes of opening the ground coffee chute the appliance switches to operation with coffee beans and the ground coffee is discharged into the coffee grounds container 4 6 Filling in water Use only fresh cold water without carbon dioxide for optimum coffee enjoyment Change the water daily E Information Basic operation The quality of the water extensively determines the taste of the coffee Therefore use a water filter see chapter 9 8 Setting the
18. asy Cleaning OK for start appears in the display 4 You can execute the Easy Cleaning programme or prepare further bev erages a Execute the Easy Cleaning programme Follow the instructions on the display Information on this is available in chapter 9 4 Easy Cleaning programme on page 87 72 Preparing beverages 5 6 b Prepare further beverages The ready symbol appears on the display Preparing hot water Requirement The ready symbol appears on the display 1 Place a vessel beneath the outlet 2 Press the Hot water button Hot water dispensing begins Beverage dispensing is ended automatically 3 Remove the vessel The ready symbol appears on the display Changing beverage settings before and during preparation You can change beverage settings before and during beverage preparation ET Information These settings only apply to current beverage preparation Changing beverage settings before preparation You can change the bean type the total beverage amount and the coffee strength before selecting a beverage vo Before selecting a beverage select a bean type with the BEAN SELECT button Before selecting a beverage use the Beverage amount slider to set a beverage amount Before selecting a beverage use the Coffee strength slider to set the coffee strength E Information When preparing latte macchiato and cappuccino the total be
19. confirm the default value with menu ok The request Please refill and insert water tank appears 7 Remove the water tank Rinse the water tank out with clean water Fill the water tank with fresh water and insert it The appliance heats up and performs automatic rinsing The ready symbol and the request Fill beans appear in the display 8 Fill coffee beans into the bean container To do this read chapter Filling with coffee beans and using Bean Select on page 65 Basic operation This chapter describes basic operating steps for using the appliance on a daily basis Switching the appliance on and off Before switching on when initially starting up the appliance read chap ter 3 5 Switching the appliance on for the first time on page 60 E Information The appliance performs automatic rinsing when switching on and off During rinsing rinsing water is also conducted into the drip tray 61 Basic operation 4 2 62 Fig 4 ON OFF button Fig 5 Welcome display Switching the appliance on 1 Place a vessel beneath the outlet 2 Press the ON OFF button 9 The welcome display appears on the display see Fig 5 The appliance heats up and performs automatic rinsing The ready symbol appears on the display Switching the appliance off Place a vessel beneath the outlet Press the ON OFF button 9 N The appliance performs automatic rinsing The ap
20. container is filled Beans do not drop into the grinder Tap lightly on the bean container Clean the bean container Coffee beans too oily Use different coffee beans Loud grinder noise Foreign object in the grinder Contact the hotline Brewing unit cannot be inserted after removing Brewing unit is not locked correctly Check whether the handle for the brewing unit locking mechanism is correctly engaged see chapter 9 3 on page 86 Drive is not in the correct position Press and hold the My Coffee but ton Also press the ON OFF button The appliance initialises Release the buttons again System error appears on the display Software problem Switch the appliance off and on again see chapter 4 1 on page 61 Contact the hotline 93 Transport storage and disposal 11 11 1 11 2 94 Transport storage and disposal Venting the appliance We recommend venting the appliance when it is not used for a long while prior to transport and when there is a risk of frost During venting remaining water is removed from the appliance Requirement The ready symbol appears on the display 1 Press the menu ok button for 2 seconds The menu appears on the display 2 Navigate to the System gt Venting menu Select Start using the arrow buttons and confirm with menu ok 4 Follow the further instructions on the display w
21. e 2 2 Overview ofthe control panel 58 19 1877 09 52 33 I elcase select your beverage 32 31 Fig 3 Control panel Item 18 Direct keys 19 Espresso Designation 20 Cafe creme 21 Cappuccino 22 Latte macchiato 23 Milk froth warm milk 24 Hot water 25 2cups 26 Beverage amount slider 27 Coffee strength slider 28 My Coffee 29 BEAN SELECT 30 Up arrow button 31 Down arrow button 32 menu ok 33 Display am v A 29 20 22 23 24 25 de amp o tf IN 26 27 Function Preparing beverages Preparing espresso Preparing caf cr me Preparing cappuccino Preparing latte macchiato Preparing milk froth or warm milk Preparing hot water Two cup dispensing Setting the beverage amount Setting the coffee strength Selecting personal settings for beverages Selecting the bean type Navigating up in the menu Navigating down in the menu Calling up the menu or confirming inputs Display of current menus and messages Example ready symbol First steps 3 1 3 2 First steps This chapter describes how to prepare your appliance for use Unpacking the appliance du CAUTION Contact with cleaning agents may lead to eye and skin irritation Store the enclosed cleaning agents out ofthe reach of children Unpack the appliance Remove the packaging material the adhesive strips and the protective films from the appliance
22. e illumination in the control panel The menu ok button remains lit If you do not operate the appliance for a long time it automatically switches to energy save mode after a specified time The period of time until energy save mode is activated is set in the Energy save mode menu Requirement The ready symbol appears on the display 1 Press the menu ok button for 2 seconds The menu appears on the display 2 Navigate to the Energy save mode menu 3 Use the arrow buttons to select a period of time and confirm with menu ok 4 Exitthe menu with the command Exit The ready symbol appears on the display E Information Energy save mode is ended by pressing the menu ok button Energy save mode cannot be deactivated completely After 4 hours without being operated at the latest the appliance switches to energy save mode Changing basic settings 8 6 8 7 Resetting the appliance to the factory settings The appliance can be reset to the factory settings E Information If you reset the appliance to the factory settings all personal settings are lost including the settings in the My Coffee menu Requirement The ready symbol appears on the display 1 Press the menu ok button for 2 seconds The menu appears on the display 2 Navigate to the System gt Factory settings menu Use the arrow buttons to select Reset and confirm with menu ok 4 Repeatedly s
23. elect the Exit command to exit the menu w The ready symbol appears on the display Displays in the System menu The System menu provides information on the status of the appliance The information can be accessed via the System gt Statistics menu and the System gt SW version menu Press the menu ok button to exit the menus The following table provides an overview of the information content Statistics Beverages Number of beverages prepared since starting up Brewing unit cleaning Number of cleaning processes performed Descaling Number of descaling processes performed Progress bars These show the number of beverages which can still be prepared until the appliance requests you to perform cleaning or descaling SW version MAIN XXXXXXXXXXX Installed software version 83 Changing basic settings 8 8 84 Setting the grinding fineness The grinding fineness of the coffee beans influences the taste of the coffee The grinding fineness has been optimally set prior to delivery We recom mend adjusting the grinding fineness after around 1 000 beverages have been dispensed around 1 year at the earliest ATTENTION Setting the grinding fineness whilst the grinder is stationary may cause damage to the grinder Only set the grinding fineness whilst the grinder is running Fig 20 Setting the grinding fineness Requirement The ready symbol appears on the d
24. files can be used Changing the name of a user profile You can change the names of the user profiles My coffee A Change name Fig 18 Changing the name of a user profile Requirement The ready symbol appears on the display 1 w Press the menu ok button for 2 seconds The menu appears on the display Navigate to the My Coffee menu Use the arrow buttons to select a user and confirm with menu ok Use the arrow buttons to select Change name and confirm with menu ok The menu for selecting individual characters appears Use the arrow buttons to select individual characters and confirm each with menu ok see Fig 18 Repeatedly select the Exit command to exit the menu The ready symbol appears on the display Activating deactivating a user profile You may only use users whose profile is activated Requirement The ready symbol appears on the display I w Press the menu ok button for 2 seconds The menu appears on the display Navigate to the My Coffee menu Use the arrow buttons to select a user and confirm with menu ok Use the arrow buttons to select Enabled disabled and confirm with menu ok 77 Personal settings My Coffee 7 2 78 5 Use the arrow buttons to select Enabled or Disabled and confirm with menu ok 6 Repeatedly select the Exit command to exit the menu The ready symbol appears on the display Selec
25. have any questions on the appliance contact Melitta or visit our website at www melitta de We hope you enjoy using your appliance For your safety The appliance conforms to the following European directives 2006 95 EC low voltage 2004 108 EC electromagnetic compatibility 2011 65 EU RoHS 2009 125 EC eco design ErP The appliance has been built using the latest technology Residual dangers nevertheless exist You must observe the safety instructions to avoid dangers Melitta accepts no liability for damage caused by failure to observe the safety instructions 53 For your safety For your safety 1 1 1 2 13 54 Symbols used The following symbols indicate particular risks in using the appliance or provide useful tips du CAUTION The signal word CAUTION indicates possible injuries ATTENTION The signal word ATTENTION indicates possible damage to the appliance E Information The signal word Information indicates additional notes and tips on using the appliance Proper use The appliance is used to prepare beverages consisting of coffee beans or ground coffee and to heat milk and water The appliance is intended for use in private households Any other use is regarded as improper and may lead to personal injury and material damage Melitta accepts no liability for damage which arises due to improper use of the appliance Da
26. isplay 1 Open the cover 10 To do this reach into the recess on the right of the appliance and pull the cover off upwards 2 Prepare any coffee beverage 3 Move the lever 11 forwards or backwards whilst the grinder is running Backwards grinding fineness coarser Forwards grinding fineness finer 4 Close the cover To do this insert the bottom of the cover into the appli ance and swing it up until it engages The ready symbol appears on the display E Information The grinding fineness is optimally set when the coffee flows evenly out of the outlet and a fine dense crema appears Care and maintenance 8 9 9 1 Converting the connection for the milk hose The milk hose can be connected on the left or right side of the outlet 39 Fig 21 Turning the inlet Proceed as follows to convert the outlet 1 Pull the milk hose from the appliance 2 Push the outlet down as far as it will go 3 Release the milk unit 39 using two fingers and pull the milk unit down wards off the outlet 4 Pull the milk distributor 40 upwards out of the milk unit 5 Turn the inlet 41 180 Installation is carried out similarly in reverse order Care and maintenance Regular cleaning and maintenance ensure the consistently high quality of your beverages General cleaning Clean the appliance regularly Immediately remove external soiling caused by milk and coffee ATTENTION
27. lcium and other pollutants out of the water Fig 24 Screwing unscrewing the water filter The water filter 45 is screwed into and unscrewed from the thread 46 on the base of the water tank 1 using the screwing aid at the end of the enclosed coffee spoon 44 91 Care and maintenance 92 Inserting the water filter E Information Place the water filter into a vessel filled with fresh tap water for a few min utes before inserting it Requirement The ready symbol appears on the display 1 Press the menu ok button for 2 seconds The menu appears on the display 2 Navigate to the Care gt Filter gt Insert filter menu Use the arrow buttons to select Start and confirm with menu ok 4 Follow the further instructions on the display w The water hardness is automatically set to Soft The ready symbol appears on the display Changing the water filter Change the water filter when the appliance requests you to do so Requirement The ready symbol appears on the display 1 Press the menu ok button for 2 seconds The menu appears on the display 2 Navigate to the Care gt Filter gt Change filter menu Use the arrow buttons to select Start and confirm with menu ok 4 Follow the further instructions on the display w The ready symbol appears on the display Removing the water filter The water filter should not be left standing dry for a long period of
28. nger due to electrical current If the appliance or the power cable is damaged the risk of a fatal electric shock is run Observe the following safety instructions to avoid dan gers due to electrical current Do not use a damaged power cable Adamaged power cable may only be replaced by the manufacturer its customer service or a similarly quali fied person Do not open any covers firmly screwed onto the appli ance housing Only use the appliance when it is in a technically flaw less condition For your safety A defective appliance may only be repaired by an authorised workshop Do not repair the appliance yourself Do not undertake any changes to the appliance its components or its accessories Do not immerse the appliance in water 1 4 Risk of burning and scalding 1 5 Escaping fluids and steam may be very hot Parts ofthe appliance also become very hot Observe the following safety instructions to avoid scalds and burns Prevent skin from coming into contact with escaping fluids and steam Do not touch any nozzles on the outlet during opera tion General safety Observe the following safety instructions to avoid per sonal injury and material damage Do not reach into the interior of the appliance during operation The appliance and its power cable must be kept out of the reach of children under 8 years of age This appliance may be used by children over 8 years of age
29. nsing the coffee Syster ssssssssscsssssssssecssssscssecssneecssneessnseessaeeessntecesseeesees 86 9 3 Cleaning the brewing unit sseeseonnsenennsseonenmersenennnsseenennersenennnsseene 86 9 4 Easy Cleaning programme nuunsssenssssennsenunnssennnsssennsssunnsssnnnssssnnsssnnnsssunnsssnns 87 9 5 Cleaning milk system programme 9 6 Cleaning coffee system programme 9 7 Descaling programme 90 9 8 Setting the water hardness sowssswsssmmmssssssmsssssssssesssssssssss 91 9 9 Using waterfilters i a 91 Problems u u cies 93 Transport storage and disposal nuunmuunnnnrnmu 11 1 Venting the appliance 11 2 Transporting the appliance aa 11 3 Disposing of the ppllaliCC i sswmsssoisumsssoetssiiessessssetersss ksersersssisnss etnnsnr Teehniealdatan sei ee 95 Dear Customer Thank you for purchasing the CaffeO Barista fully automatic coffee maker The operating instructions will help you to discover the diverse options offered by the appliance and enjoy your coffee to the full Read the operating instructions through carefully This will help to avoid personal injury and material damage Store the operating instructions care fully If you pass the appliance on enclose the operating instructions with it Melitta accepts no liability for damage caused by failure to observe the operating instructions If you require further information or
30. of the Easy Cleaning programme gt The ready symbol appears on the display Cleaning milk system programme With this programme the milk system is cleaned using a milk system clean ing agent To maintain hygiene and avoid damage to the appliance we recommend carrying out the cleaning programme once a week The cleaning programme takes approximately 3 minutes and should not be interrupted 87 Care and maintenance 88 ATTENTION Use of unsuitable milk system cleaning agents may cause damage to the appliance Use Melitta PERFECT CLEAN Espresso Machines milk system cleaning agent exclusively Requirement The ready symbol appears on the display 1 Place a vessel with a capacity of at least 0 7 litres beneath the outlet 2 Press the menu ok button for 2 seconds The menu appears on the display Navigate to the Care gt Cleaning milk system menu Use the arrow buttons to select Start and confirm with menu ok 5 Follow the further instructions on the display up to the end of the inten sive cleaning programme gt w The ready symbol appears on the display Cleaning the milk unit We additionally recommend regularly cleaning the milk unit the milk hose and the milk container depending on model an 41 2 39 Fig 23 Removing the milk unit Proceed as follows to remove the milk unit 1 Pull the milk hose from the appliance 2 Push the
31. outlet down as far as it will go 3 Release the milk unit 39 using two fingers and pull the milk unit down wards off the outlet 4 Pull the milk distributor 40 upwards out of the milk unit 5 Pull the inlet 41 out upwards 6 Clean the individual parts with warm water Use the enclosed cleaning brush a soft damp cloth and normal washing up liquid Installation is carried out similarly in reverse order Care and maintenance 9 6 E Information The milk container depending on model is dishwasher safe Cleaning coffee system programme This cleaning programme is used to remove residues and coffee oil residues using coffee machine cleaning agents To avoid damage to the appliance we recommend carrying out the clean ing programme every 2 months or as requested by the appliance The cleaning programme takes approximately 15 minutes and should not be interrupted Ju CAUTION Contact with coffee machine cleaning agent may lead to eye and skin irritation Observe the processing instructions on the coffee machine cleaning agent packaging ATTENTION Use of unsuitable coffee machine cleaning agents may damage the appliance Use Melitta PERFECT CLEAN Espresso Machines cleaning tablets exclu sively Requirement The ready symbol appears on the display 1 Press the menu ok button for 2 seconds The menu appears on the display 2 Navigate to the
32. pliance switches off E Information The appliance switches off automatically when it is not operated for a long time Automatic rinsing is also carried out in this case The off time can be set in the Auto OFF menu see chapter 8 4 Setting Auto OFF on page 81 If no beverage has been prepared since switching on or if the water tank is empty no rinsing takes place Using the control panel The essential functions can be accessed using the control panel Press the button with a fingertip The control panel does not react when touched with a pen or other objects Only those buttons which can be used in the appliance s current status light up Basic operation Use the following actions to operate the control panel Brief press Press a button briefly to select a function Long press Press a button for longer than 2 seconds to select a second function which may be available Press or Press or to increase or reduce the current value Hold a button down to change the value continuously Press the slider Press on the slider to select a value Pull the slider Press and pull the slider to increase or reduce the current value Navigating in the menu To set individual beverages and for maintenance and care you must call up the menu in the display and navigate in the menu Observe the instructions on the display Direct keys Espresso Coffee strength Strong Confirm
33. ppears on the display 1 Press the menu ok button for 2 seconds The menu appears on the display 2 Navigate to the Care gt Descaling menu Use the arrow buttons to select Start and confirm with menu ok 4 Follow the further instructions on the display up to the end of the desca ling programme w The ready symbol appears on the display Care and maintenance 9 8 99 Setting the water hardness The set water hardness influences the frequency of descaling The harder the water the more frequently the appliance has to be descaled f Information The water hardness cannot be set if you use a water filter see chapter 9 9 Using a water filter on page 91 Determine the water hardness with the enclosed test strip Observe the instructions on the test strip packaging and in table Water hardness range on page 95 Requirement The ready symbol appears on the display 1 Press the menu ok button for 2 seconds The menu appears on the display 2 Navigate to the Water hardness menu using the arrow buttons 3 Use the arrow buttons to select the water hardness range and confirm with menu ok 4 Exit the menu with the command Exit The ready symbol appears on the display Using a water filter Use of a water filter extends the service life of the appliance and the appli ance has to be descaled less frequently The water filter contained in the scope of delivery filters ca
34. se the arrow buttons to select a language and confirm with menu ok Exit the menu with the command Exit AUN The ready symbol appears on the display 82 Setting the time You can set the time shown on the display Requirement The ready symbol appears on the display 1 Press the menu ok button for 2 seconds The menu appears on the display 2 Navigate to the Clock menu 3 Use the arrow buttons to select the hours and minutes Confirm each setting with menu ok 4 Exit the menu with the command Exit The ready symbol appears on the display E Information If you want to prevent the time from being shown on the display set the time to 00 00 80 Changing basic settings 8 3 8 4 Activating deactivating Auto Bean Select You can activate deactivate automatic selection of a bean type Requirement The ready symbol appears on the display 1 Press the menu ok button for 2 seconds The menu appears on the display 2 Navigate to the System gt Auto Bean Select menu 3 Use the arrow buttons to select Enabled or Disabled and confirm with menu ok 4 Repeatedly select the Exit command to exit the menu The ready symbol appears on the display Setting Auto OFF If you do not operate the appliance for a long time it switches off automat ically after a specified time Set the duration until the appliance switches off in the Auto OFF menu You can also define a specific
35. sing Preparation with recipes see chapter 6 1 Selecting recipes on page 75 Use of the My Coffee function see chapter 7 Personal settings My Coffee on page 76 Standard dispensing is described in this chapter Note The storage containers should contain sufficient amounts of coffee and water If the filling level is too low the appliance requests you to refill it The appliance does not indicate a lack of milk The vessels for the beverages should be sufficiently large see table Factory settings on page 95 Preparing espresso and caf creme Requirement The ready symbol appears on the display 1 Place a vessel beneath the outlet 2 Press the Espresso or Caf creme button The grinding process and beverage dispensing start Beverage dispensing is ended automatically 3 Remove the vessel The ready symbol appears on the display Preparing cappuccino Requirement The ready symbol appears on the display and milk is con nected 1 Place a vessel beneath the outlet 2 Press the Cappuccino button The grinding process and coffee dispensing start Coffee dispensing is ended automatically Milk dispensing begins Beverage dispensing is ended automatically 3 Remove the vessel Easy Cleaning OK for start appears in the display 4 You can execute the Easy Cleaning programme or prepare further bev erages a Execute the Easy Cleaning programme Follow the instructions
36. t Descaling menu Basic operation 4 4 Filling with coffee beans and using Bean Select Roasted coffee beans lose their aroma Only fill the bean container with as many coffee beans as you will consume over the next 3 4 days ATTENTION Using unsuitable types of coffee may lead to clogging of the grinder Do not use freeze dried or caramelised coffee beans Do not pour ground coffee into the bean container Fig 8 2 chamber bean container The 2 chamber bean container 2 enables you to use two different types of coffee Auto Bean Select ensures that the best coffee beans are auto matically selected for various coffee specialities Espresso based beverages take their coffee beans from left bean chamber 1 34 caf creme based beverages from right bean chamber 2 35 The following table shows the assignment of the bean chambers to the coffee beverages You can change the settings see chapter 6 2 Changing default settings on page 76 1 34 Espresso cappuccino latte macchiato 2 35 Caf creme 1 Open the lid of the 2 chamber bean container 2 2 Fill espresso beans into left bean chamber 1 34 and caf creme beans into right bean chamber 2 35 3 Close the lid of the 2 chamber bean container 4 The BEAN SELECT button 29 can be used to select a bean type prior to preparation see chapter Changing beverage settings before prepara tion on page 73 65 B
37. time When it is not used for a long time we recommend storing the water filter in a vessel filled with tap water in the refrigerator Requirement The ready symbol appears on the display 1 Press the menu ok button for 2 seconds The menu appears on the display 2 Navigate to the Care gt Filter gt Remove filter menu Use the arrow buttons to select Start and confirm with menu ok 4 Follow the further instructions on the display w The water hardness is automatically reset to the previous setting The ready symbol appears on the display Problems 10 Problems Ifthe actions listed below fail to rectify the problems or other problems not listed here occur contact our hotline local rate Germany 49 0 571 861 900 Coffee only emerges from the outlet in drips Grinding fineness too fine Set a coarser grinding fineness see chapter 8 8 on page 84 Appliance soiled Clean the brewing unit see chap ter 9 3 on page 86 Run the cleaning programme see chapter 9 6 on page 89 Appliance calcified Descale the appliance see chap ter 9 7 on page 90 Coffee does not flow Water tank not filled or inserted incor rectly Fill the water tank and ensure it is positioned correctly see chap ter 4 6 on page 67 Brewing unit clogged Clean the brewing unit see chap ter 9 3 on page 86 Fill beans appears on the display although the bean
38. ting changing personal settings Depending on beverage you can assign the following settings to a user Coffee amount in millilitres Froth amount in millilitres Milk amount in millilitres Hot water amount in millilitres Beans bean chamber 1 or 2 Coffee strength very mild mild normal strong very strong Temperature low normal high The assignment of personal settings to a user is always similar Setting the coffee amount for a cappuccino is described here as an example My coffee le Cappuccino Exit Recipes Coffee amount Froth amount Beans Coffee strength Temperature Fig 19 Changing personal settings Requirement The ready symbol appears on the display 1 Press the menu ok button for 2 seconds The menu appears on the display 2 Navigate to the My Coffee menu 3 Use the arrow buttons to select a user and confirm with menu ok 4 Navigate to the Cappuccino gt Coffee amount menu 5 Use the arrow buttons to select an amount and confirm with menu ok 6 Repeatedly select the Exit command to exit the menu The ready symbol appears on the display The next time a cappuccino is prepared by the user the selected coffee amount is used Personal settings My Coffee Preparing beverages with personal settings The preparation of beverages using the My Coffee function is similar for all beverages The preparation of a cappuccino is described here as an example
39. tings The appliance offers further options for preparing coffee specialities You can use default recipes or permanently change the beverage settings Selecting recipes The following coffee specialities are available Espresso Espresso standard ristretto lungo double espresso double ristretto Caf creme Caf cr me standard double caf creme americano amer icano extra shot long black Cappuccino Cappuccino standard espresso macchiato caf latte caf au lait Latte macchiato Latte macchiato standard latte macchiato extra shot latte macchiato triple shot flat white E Information The recipe selection remains valid until it is changed again Recipe selection is similar for all beverages The selection of a ristretto is described as an example here Direct keys Espresso cae Recipes Exit gt Espresso Ristretto Lungo Double Espresso Double Ristretto Fig 16 Recipe selection for ristretto Requirement The ready symbol appears on the display 1 Press the menu ok button for 2 seconds The menu appears on the display 2 Navigate to the Direct keys gt Espresso gt Recipes menu 3 Use the arrow buttons to select Ristretto and confirm with menu ok 4 Repeatedly select the Exit command to exit the menu The ready symbol appears on the display When an espresso is next prepared the ristretto recipe will be used 75 Personal settings
40. ull the cover off upwards 2 Press and hold the red lever 42 on the brewing unit handle 13 and turn the handle clockwise until it engages at the stop 3 Pull the brewing unit out of the appliance using the handle Care and maintenance 9 4 95 4 Rinse the entire brewing unit thoroughly from all sides under running water Make particularly sure that coffee residues are removed from the sieve 43 5 Allow the brewing unit to drip dry 6 Use a soft dry cloth to remove coffee residues from the surfaces inside the appliance 7 Insert the brewing unit into the appliance Press and hold the red lever on the brewing unit handle and turn the handle counter clockwise until it engages at the stop 8 Close the cover To do this insert the bottom of the cover into the appli ance and swing it up until it engages Easy Cleaning programme The milk system is rinsed using the Easy Cleaning programme Each time after preparing a beverage with milk the appliance requests you to execute the Easy Cleaning programme You can also run the Easy Cleaning programme manually Requirement The ready symbol appears on the display 1 Place a vessel beneath the outlet 2 Press the menu ok button for 2 seconds The menu appears on the display 3 Navigate to the Care gt Easy Cleaning menu Use the arrow buttons to select Start and confirm with menu ok 5 Follow the further instructions on the display up to the end
41. verage amount is subdivided into a coffee and a milk amount according to a specified ratio Ifyou do not prepare a beverage within 1 minute the appliance switches to the default settings 73 Preparing beverages SJ 74 Changing beverage settings during preparation You can change the beverage amount and the coffee strength during bev erage preparation During beverage dispensing coffee or milk use the Beverage amount slider to set the relevant beverage amount During the grinding process use the Coffee strength slider to set the coffee strength Stopping beverage preparation If you want to stop beverage preparation prematurely press the selected direct key again Preparing two beverages simultaneously The 2 cups button is used to prepare two beverages simultaneously Two cup dispensing is possible for espresso cappuccino caf creme and latte macchiato Two cup dispensing is not possible for any other type of beverage Fig 15 Two cup dispensing 1 Place two vessels beneath the outlet 6 2 Press the 2 cups button 25 3 Continue as described for preparation of the relevant beverage E Information The setting only applies to the next beverage which is prepared Ifyou do not prepare a beverage within 1 minute the appliance switches to single cup dispensing Permanently changing beverage settings 6 1 Permanently changing beverage set
42. water hardness on page 91 and chapter 9 9 Using a water filter on page 91 Fig 10 Water tank 1 Open the lid of the water tank and pull the water tank 1 upwards out of the appliance using the handle 2 Fillthe water tank with water Note the maximum capacity of 1 8 litres 3 Insert the water tank into the appliance from above and close the lid 67 Basic operation 4 7 4 8 68 Adjusting the outlet The outlet 6 is height adjustable Set the greatest possible distance between the outlet and the vessel Depending on vessel push the outlet up or down Fig 11 Height adjustable outlet Using milk Use cooled milk for optimum coffee enjoyment Depending on model you can use the enclosed milk container or the milk hose and conventional milk packs E Information The connection for the milk hose is installed on the right of the outlet in the factory If you require the connection on the left side read chapter 8 9 Converting the connection for the milk hose on page 85 Basic operation Connecting the milk container depending on model Only fill as much milk as you will use immediately into the milk container Fig 12 Connecting the milk container to the appliance 1 Fillthe desired amount of milk into the milk container 37 2 Push the outlet 6 down 3 Connect the milk hose 36 to the milk container and the connection 14 at the outlet E
Download Pdf Manuals
Related Search