Metra 95-7895 car kit
Contents
1. INSTALLATION INSTRUCTIONS FOR PART 95 7895 APPLICATIONS Honda Accord 1998 2002 95 7895 KIT FEATURES e DDIN Head Unit Provision e 150 Stacked Head Unit Provision KIT COMPONENTS A Double DIN Brackets B Double DIN Trim Plate WIRING AND ANTENNA CONNECTIONS Sold Separatel Harness e 70 1721 Honda Harness 1998 up TOOLS REQUIRED e Small Flat Blade Screwdriver e Panel Removal Tool e Phillips Screwdriver SS y 1 800 221 0932 Ld www metraonline com COPYRIGHT 2007 2009 ELECTRONICS CORPORATION umm 777 4 95 7895 TABLE OF CONTENTS Dash Disassembly Honda Accord 1998 2002 1 Kit Assembly DDIN Stacked ISO DIN Head Unit Provisions 0 0 2 Note Refer also to the instructions included with the aftermarket radio KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry Log onto www installerinstitute com or call 800 354 6782 for more information and take steps toward a better tomorrow Metra recommends MECP certified technicians gt I Mares 25 7895 DASH DISASSEMBLY HONDA ACCORD 1998 2002 1 Disconnect the negative battery ter minal to prevent an accidental short circuit 2 Unsnap the clock panel disconnect the wiring and remove Figure A 3 Remove 1 Phillips screw2. exposed in the clock cavity Figure A 4 Remove 2 Phillips screws below the factory head unit Figure A 5 Unclip the radio trim bezel and dis connect the wiring 6 Remove 4 Phillips screws securing the factory head unit assembly and disconnect the wiring Continue to kit assembly Rm 7 7 95 7895 KIT ASSEMBLY DOUBLE DIN STACKED ISO DIN HEAD UNIT PROVISIONS Note Refer also to the instructions included with the aftermarket radio 1 Locate the factory wiring harness in the dash Metra recommends using the proper mating adapter from Metra or AXXESS Re connect the negative battery terminal and test the unit for proper operation 2 Attach the Double DIN brackets to the edge of the Double DIN trim plate Figure A 3 Slide the Double DIN head unit or stacked ISO head units into the bracket trim plate assembly and secure the Double DIN head unit or stacked ISO head units to the assembly using the screws supplied with the radio Figure B 4 Reassemble dash in reverse order of disassembly 95 7895 INSTRUCTIONS NOTES 95 7895 INSTRUCTIONS NOTES 95 7895 INSTRUCTIONS NOTES 5 7895 INSTRUCTIONS 1 800 221 0932 www metraonline com REV 11 09 09 COPYRIGHT 2003 2009 METRA ELECTRONICS CORPORATION INST95 7895
Download Pdf Manuals
Related Search