Brodit 512362 holder
Contents
1. 19 April 2012 www brodit com 2012 Brodit AB Product 512362 512362 Active holder with cig plug With tilt swivel The active holder charges your Motorola when it is in the holder The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection Connects to the vehicle s cigarette lighter socket 12 24 Volt Attach onto a ProClip Mounting Platform EAN 7320285123625 Item no 512362 fits Motorola Droid Razr MAXX For USA Motorola Razr MAXX For all countries 1 2 INSTALLATION INSTRUCTIONS Please read all of the instructions and look at the pictures before attaching the holder 1 Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back 2 Place the attaching plate onto the desired position Screw the attaching plate into place with the enclosed screws Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel Screw a few turns on the screw just so the thread starts to pull Pull the holder toward you and hold it slightly tensed in the same time tighten the screw so the holder is pulled toward the tilt swivel Tighten the screw until the holder is firmly in place but still can be adjusted 3 Place the device in the holder by carefully sliding straight upward To remove the device from the holder simply pull it straight downward out ot the holder 4 The holder is in place 2 2
Download Pdf Manuals
Related Search