Hanns.G ST24HMUB 23.6" Full HD LCD TV
Contents
1. Secure the TV to the bracket using the 4 mount holes on the back and center of the TV Securing the Installation Space Keep the required distances between the product and other objects e g walls to ensure proper ventilation Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product Install the product so that the required distances shown in the figure are kept B When using a stand or wall mount use parts provided by Hannspree only When installing the product with a stand When installing the product with a wall mount Note Please read the instructions of your specific wall bracket to properly wall mount the TV 8 HANNSpree Control Panel 2 3 4 5 6 GI am o O Z TT LAL L Qo 1 7 No Description Button Function 7 Power Standby indicator Indicate power on or standby status and Remote IR sensor Receive incoming remote control commands pu Press to increase the volume or toggle the selection move to the right on the OSD menu 2 Volume adjust 10 Press to decrease the volume or move to the left on m the OSD menu Press to increase the program number or move upward to the previous item on the OSD menu 3 Channel select Press to decrease the program number or move downward to the next item on the OSD menu Press to turn the on screen di2. TT Press X to eliminate sounds and press XX again or press the volume buttons to restore the original volume Setting Up Your Favorite Channels Press MENU on the remote control or the control panel to display the main menu Select Channel gt Fav List Edit and press OK to enter its submenu Press A to scroll through the channel list and press OK to select it Press MENU on the remote control to close the menu Editing the Channel List Press MENU on the remote control or the control panel to display the main menu Select Channel gt Channel List Edit and press OK to enter its submenu Select the desired channel and press OK to confirm B To view the selected TV channel select View and press OK to start viewing the selected channel B To skip viewing the selected TV channel select Delete and press OK to confirm B To add the channel manually into the channel list select Add and press OK to confirm Press MENU on the remote control to close the menu Adjusting the Backlight Press MENU on the remote control or the control panel to display the main menu Select Picture IE gt Backlight and press OK to enter its submenu Press lt gt to adjust the brightness of the screen and press OK Press MENU on the remote control to close the menu Changing Your Location Press MENU on the remote control or the control panel to display the main menu Select Setup 5 gt Location HANNSpree 15 To
3. factory default settings Note The OSD menu will appear when the input source is TV HANNSpree 19 PC Setting only for VGA connection Setup Set the on screen display language Enable Disable the TV programs or HSI ISNA Auto Adjust Position H Position V Phase V Chip 20 HANNSpree V Chip Lock TV Parental Guidelines only available when V Chip Lock is set to On MPAA Rating only available when V Chip Lock is set to On Canadian English only available when V Chip Lock is set to On Canadian French only available when V Chip Lock is set to On Downloadable U S Rating only available when V Chip Lock is set to On and only for DTV Change PIN only available when V Chip Lock is set to On movies to be locked according to TV rating setting Off On Allow Block access of the TV programs according to U S TV programs ratings Allow Block access of the movies according to U S movies ratings Allow Block access of the TV programs and movies according to Canadian English ratings Allow Block access of the TV programs and movies according to Canadian French ratings Download a new rating system via digital broadcasting in the U S when available Set the new password Closed Caption Caption Mode Select the Closed Caption service Digital Caption Customize the display types and Options font styles in digital programs Location Set your current locati
4. reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced technician for help Warning The Federal Communications Commission warns that changes or modifications of the equipment not expressly approved by the party responsible for compliance could void your authority to operate the equipment DOC Compliance Notice This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications This device complies with Canada ICES 003 Class B Applies only to products purchased in the United States of America 2 Applies only
5. HANNSpree 23 6 IV User s Manual For device connection instructions please refer to the I O port descriptions and function table in the enclosed user s manual Co c ZN gt CABLE ANTENNA 9 O OOO O 100 Q ee ARE coc For reference OO i SS TE ES TI TI TZ El Qe TL SS TS ES TIES NN Av010 AV IN2 YPbPr VGA AUDIO IN PC IN AN Suggest to put this product in place where used by adult only such as restaurants sports fields clubs etc keep this product out of reach of children to prevent any damage or injury happening 14 Contents E Regulatory Information 2 Changing the OSD Language 16 o Safety NOLIC S saias cssnsiniado n is idas 2 Resetting to Factory Default TT Description of Warning Symbols 2 enia UTEM RSS eee 16 Preface RC E 4 ori E o ee 17 Warranty and Service 5 Orsa Manu Selectiom s cs 18 Cleaning icaeisxceskessnice vet Piscas iaisdnisibaaia 5 Media Center MEAG cs cerae 24 1 Getting Started 6 Basic Operation 22 Mi c Mee enna ete o Viewing Photos 22 Introducing the TV essere 6 Playback Music 22 P2 CGMS S ER 6 Customizing Settings 22 Foot Stand Installation 4 Troubleshooting 23 Disconn
6. Press A Y to select USB then press OK to confirm 5 The USB thumbnail mode browser appears TITTEN o Select the media type of the file you wish to play 6 Use lt gt to browse the files and press OK to confirm USB FLASH Move Enter 2 Return Viewing Photos 1 Select Photo A and press OK to enter the main Photo content browser 2 n the main Photo content browser use 5 to select a photo 3 Press OK to view in full screen B To begin the slide show press OK A slide show begins from the selected photo B To pause the slide show press OK again m To stop the slide show press W Playback Music 1 Select Music j and press OK to enter the main Music content browser 2 n the main Music content browser use 5 to select a song 3 Press OK to play and an automatic playback begins from the selected song B Press the media buttons H1 D EE k b on the remote control to pause stop or skip to the next previous song You can also press OK to pause resume the music playback Customizing Settings 1 Select Setup Z and press OK to enter the Setup menu 2 n the Setup menu use A W to select the menu item and use lt gt to change the setting B Slide Show Speed Set the slideshow transition speed Normal Slow Fast B Music Repeat Mode Set the repeat mode for the music playback On Off B Slide Show Effect Set the slideshow transition effect No Effect Bottom to Top Top to Bottom Random Box Waterfa
7. e trademarks or registered trademarks of their respective owners The purchase of the product described herein shall not be deemed to grant either directly or by implication estoppel or otherwise any license under the copyrights patents patent applications or trademarks of Hannspree except for the normal non exclusive use that arises by operation of law in the sale of a product m Z o T RECYCLING INFORMATION We care very much about our environment protection strategy and firmly believe the actions we take help us create a healthier Earth These devices contain recyclable materials which can be re decomposed and re integrated into brand new products On the contrary other material can be classified to hazardous and poisoned substance We strongly encourage you to visit our website or call to find out recycling information and services available in your area www hannspree com us 888 808 6789 Notes e The LCD TV is for entertainment use only and visual display tasks are excluded e This device uses a VGA connector to connect to a PC To reduce the influence of main frequency on the source signal use a VGA monitor cable with ferrite shield e The appliance coupler is used as the disconnect device and shall remain readily operable e The LCD TV shall be connected to a MAINS socket outlet with a protective earthing connection Preface Thank you for purchasing a Hannspree LCD HDTV Your new TV will allow you to en
8. ecting the Stand 5 Support Timing 24 a SANS O A srs 6 Specifications 25 Control Panel serne 9 e Input and Output Jacks 10 e Remote Control 11 2 Setting up your TV 12 e Power Connection 12 e Rear Connections 12 e Using the TV 13 Turning the TV On and Off 13 Running Setup Wizard 13 Selecting Your Content Source 14 Performing an Automatic Channel Search 14 Selecting Channels 14 Adjusting the Volume 15 Setting Up Your Favorite CRANES ma tdi dtes 15 Editing the Channel List 15 Adjusting the Backlight 15 Changing Your Location 15 HANNSpree 1 m Z E o T Regulatory Information FCC Compliance Statement This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Additional Information This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide
9. ee 17 I 2 mm QO Z Lu On Screen Menu Selection Follow the instructions indicated on the bottom of the OSD Function Menu Press CH A CH v on the control panel or the A arrow keys to scroll through the menus m Z o T e Press VOL on the control panel or OK to enter a corresponding submenu Press VOL VOL on the control panel or the lt gt arrow keys to adjust the desired setting and press VOL on the control panel or OK to confirm the selection On certain menu options press VOL on the control panel or the gt arrow key to select the desired setting Toggle MENU to exit the OSD menu Picture Description Picture Mode Select a preset view option optimized for different viewing conditions Vivid Standard Soft User Brightness Adjust the brightness of the picture 0 100 Adjust the contrast of the picture 0 100 Adjust the sharpness or softness of the display 0 100 Hue Adjust the balance of the red green and blue colors in the display 0 100 Adjust the sharpness or softness of the display 0 100 Color Tem Select the color temperature of the display i Normal Warm Cool Backlight Adjust the backlight setting of the display 0 10 Reduce the noise level Off Low Middle High Aspect Ratio Select the aspect ratio of the display Auto Normal Wide Zoom Cinema O Auto C Normal OQ C2 C2 C2 Cinema 18 HANNSpree Restore Default Reset all Pict
10. et you change channels adjust the volume and change display settings through an easy to use on screen display menu system The built in stereo speakers provide full rich sound and a convenient audio output port lets you connect to an external audio system or earphones Features TV Tuner Built in TV Tuner ATSC 8 e On Screen Display OSD menu system VSB e Built in stereo speakers Audio Video support Image Enhancement Technology VGA PC input 3 2 2 2 pull down 24P HDMI inputs 3D Comb Filter HDTV Component input e Noise Reduction AV Composite input Advanced 3D de interlacing R L audio inputs e Edge Enhancement VGA PC audio input e Full HD TV 3 5 mm stereo earphone output e Multimedia function Photo Music USB input Note e The supporting devices mentioned in this manual may vary on different models For more information please refer to the manufacturer s user manual or the Quick Start Guide of your TV model 6 HANNSpree o o T S ee la O O O O C ue Ot EN a c For reference Foot Stand Installation Carefully place the TV screen side down on a cushioned surface to protect the screen from damage B Install only with another person s assistance B Make sure to distinguish between the front and back of the stand when assembling them Attach the foot stand as shown in the illustration D
11. fetures settings and functionalities of this TV can increase or change the power consumption Depending upon such changed settings the power consumption may exceed the limits required for the ENERGY STAR qualification Packing Material Disposal Please refer to your local laws and directives to ensure an environmentally safe disposal Keep this manual for later use Cleaning Instruction for cleaning the TV Clean your TV frequently with a soft cloth to remove dust and dirt More persistent dirt can be removed with a moist cloth with soft soap Do not use detergents or any other aggressive cleaning This might damage the housing or screen surface HANNSpree 5 1 Getting Started Package Contents m Z G E o Make sure the following components are included in the box Please contact Hannspree T Customer Service immediately if anything is missing or damaged TV User s manual Quick start guide Warranty card Prion ey HE Attention card Warranty sticker Power cord Remote control and batteries TV stand Introducing the TV You can watch ATSC 8 VSB broadcast cable or digital television channels and easily connect a VCR STB or DVD player to the HDTV Component AV Composite and HDMI input ports location of these ports depends on model You can also use the TV as a monitor for your PC by connecting it through the VGA port Convenient control buttons located on the TV and a handy remote control l
12. g GUIDE Press to display detailed programming information for channels only for DTV MUTE X Press to toggle the sound off and back on again HANNSpree Volume adjust Press to increase audio volume Press to decrease audio volume 11 Channel list Press to show channel list 12 Media buttons Press the control buttons to perform specific tasks in the TV USB or HDMI CEC mode FAV Press to display stored favorite channel list 10 ASPECT i I 13 Power Press to turn the TV on or off Press to select the picture format Inserting Batteries Battery size AAA Notes directly exposed to strong light 14 LAST O 15 MENU Press to return to the last selected channel Press to access the main menu or to return to the previous menu 16 Arrows Press 1 to navigate in the main menu select menu options set functions and change values gt can also be used to open the corresponding submenu 17 RETURN Press to return to the previous menu screen 18 Select program Press A to increase the program number Press V to decrease the program number 19 Dual sound 2 Press to change the multi sound selection of the TV channel 20 Closed caption C C Press to open or close the closed captions 21 SLEEP Press to set the sleep timer For best results use the remote control within a proper distance from the front of the TV Do not e
13. ggle OK or gt to select your location Home or Retail Press MENU on the remote control to close the menu m Z o T Changing the OSD Language Press MENU on the remote control or the control panel to display the main menu Select Setup 5 gt Language Toggle OK or gt to select the desired language Press MENU on the remote control to close the menu Resetting to Factory Default Settings Press MENU on the remote control or the control panel to display the main menu Select Picture 14 Audio Channel or Setup gt Restore Default Press OK or gt to reset the respective menu settings 16 HANNSpree 3 Adjusting On Screen Display OSD Settings The On Screen Display OSD menu system provides a quick and simple method to adjust the TV settings The OSD menu can be accessed conveniently through the buttons on the remote control Before going into details of each OSD option you may get acquainted with the placement of the OSD system Adjustable Options Display the setting value of the adjustable options Brightness Contrast Sharpness Hue Saturation Main Menus Display the main menus Move Enter Return Instructions Quick instructions for adjusting the settings Function TV Control Panel Remote Control OSD Menu MENU MENU Up CHA Arrow A Down CHV Arrow W Increase VOL Arrow gt Decrease VOL Arrow Select VOL OK Return VOL RETURN HANNSpr
14. isconnecting the Stand Carefully place the TV screen side down on a cushioned surface to protect the screen from damage Remove the stand from the TV Installing the LCD TV requires special skill that should only be performed by qualified service personnel Customers should not attempt to do the work themselves Hannspree bears no responsibility for improper mounting or mounting that results in accident or injury You can ask a qualified service personnel about using an optional bracket to mount the TV to the wall HANNSpree 7 am o O Z TT Installing the Wall Mount Kit Wall mount kits sold separately allow you to mount the TV on the wall For detailed information on installing the wall mount see the instructions provided with the wall mount kits Contact a technician for assistance when installing the wall mounted bracket Hannspree is not responsible for any damage to the product or injury to yourself or others if you select to install the TV on your own m Z o T Li B Do not install your wall mount kit while your TV is turned on It may result in personal injury due to electric shock VESA compatible Mount holes Model Name wall bracket WxH Omer Screw type Maximum loading 23 6 TV 100x100 mm 4 VA ANE dad 15 kg metric 5 x 10 mm Purchase a VESA compatible wall bracket which passes UL Certification Locate your ideal TV position on the wall Fix the wall bracket firmly on the wall
15. joy superior audio and video while enriching your lifestyle with advanced technology Please carefully read this manual in its entirety before setting up using or operating your TV To ensure the safe and correct installation and operations of the TV it is important that the safety and operation instructions in this manual are followed This instruction manual is designed to assist you in setting up and using the TV The information in this manual has been carefully checked for accuracy however no guarantee is given to the correctness of the contents The information in this manual is subject to change without notice To the extent allowed by applicable law Hannspree Inc Hannspree shall not be liable for direct indirect special exemplary incidental or consequential damages arising from any defect or omission in this manual even if advised of the possibility of such damages in advance 4 HANNSpree Warranty and Service For complete warranty service information please refer to the Warranty card enclosed with your TV As an ENERGY STAR Partner Hannspree has determined that this product meets the ENERGY STAR guidelines for energy efficiency It meets strict energy efficiency guidelines set by the U S Environmental Protection Agency and Department of Energy ENERGY STAR is a joint program of these goverment agencies designed to promote energy efficient products and practices am o O Z TT Changes to certain
16. lified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection Where the MAINS plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable The apparatus should be used in moderate climate The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus Personal Safety To avoid overloading the power supply never plug too many electrical devices into an outlet power strip or extension cable Dangerous high voltage electric power components are located inside the TV To avoid electric shock do not disassemble the casing Do not place or drop metals small objects or flammable materials into the vent of the TV If the TV is dropped falls down or is otherwise damaged unplug the power cord immediately and contact an authorized service technician If any fluid is sprayed or dropped into the TV contact an authorized service technicia
17. ll Random B Information Press OK to view the information on the USB drive 22 HANNSpree 4 Troubleshooting Situation No picture and sound No picture or poor picture sound is OK Picture is not in color Picture is OK no sound One of the speakers has no sound Cannot receive some TV channels using cable TV Want to reset TV settings Cannot operate menus Screen image turns over Snow appears on the screen Blurred or overlapped images Remote control doesn t work Solution Connect the power cord properly Check if the power LED is on or not Press on the control panel or remote control Press INPUT on the remote control or control panel to select the connected video sources Press CHA or CHYF on the remote control or CH or CH v on the control panel to switch to other TV programs Make sure all cables are connected properly Check the antenna and cable connections Adjust the Brightness in the Picture menu Adjust the Color Temp in the Picture menu Make sure the source device is functioning properly Make sure the audio cable is connected securely Turn the mute off Press VOL on the control panel or the remote control Adjust the Balance in the Audio menu Try the Auto Scan function in the Channel menu Use the Restore Default function in the Picture Audio Channel and Setup menus If OSD items are colored in gray the system is in a state such that those setting
18. n The screen of the TV is made of glass Avoid hitting or scraping it If the screen is broken do not touch the broken glass Do not allow children to use the TV unattended Be careful when disconnecting the power plug Hold the plug Do not attempt to disconnect the plug by pulling on the power cord A If the remote control is not used for a long period remove the batteries and store them properly Handle damaged or leaking batteries carefully and wash hands with soap if they come in contact with leaked chemical fluids If your remote control has two batteries do not mix new and old batteries or the life of the new batteries will be shortened Chemical fluids may leak from the old batteries Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type recommended by the equipment manufacturer Discard used batteries according to manufacturer s instructions Refer to your local recycling or waste disposal rules and contact a local waste disposal vendor to dispose of used batteries The remote control cover may have a magnet in it so do not place magnetic sensitive items such as watches credit cards or flash media close to the cover Do not use force when pulling the remote control cover open you may damage the hinge Trademark Notice Hom Hannspree products incorporate High Definition Multimedia Interface HDMI technology HDMI the HDMI log
19. ng the TV Turning the TV On and Off 1 Press on the control panel or remote control to turn the TV on The power LED indicator turns blue indicating that the TV is on 2 Press O again The power LED turns red indicating that the TV is off Running Setup Wizard The Setup Wizard is displayed on the screen when you turn on your LCD TV for the first time Note Press 4 on the remote control to move through the menu Press OK to select 1 Select your language for the on screen 2 Select your time zone display OSD menu Installation Guide Setting Installation Guide Setting OSD Language Samoa Time Zone Spanish Atlantic Daylight Saving French Daylight Saving Location Location Central Energy saving Energy saving Mountain Auto Channel Scan Auto Channel Scan Pacific Next 5 Return Next 5 Return 3 Select your daylight saving mode 4 Select your TV mode Installation Guide Setting Installation Guide Setting OSD Language OSD Language Time Zone Time Zone Daylight Saving Location Energy saving Energy saving Auto Channel Scan Auto Channel Scan Select Next 5 Return Select Next gt Return 5 Select your energy saving mode 6 Select your tuner mode Press OK for channel scan Installation Guide Setting Installation Guide Setting OSD Language OSD Language Time Zone Time Zone Daylight Saving Daylight Saving Location Location Energy saving Auto Channel Scan Next 5 Return Ne
20. o avoid possible danger Important Safety Instructions Read these instructions Keep these instructions Heed all warnings Follow all instructions Do notuse this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet NOTE Applies to US only Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus O combination to avoid TT injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qua
21. o and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries License Notice and Trademark Acknowledgment LI DOLBY Manufactured under DIGITAL license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories HIGH DEFINITION TELEVISION ENERGY STAR HANNSpree 3 a o O Z TT Copyright Copyright 2011 Hannspree Inc All rights reserved This manual is protected by copyright and distributed under licenses restricting its use copying and distribution No part of this manual may be reproduced in any form by any means without the prior written authorization of Hannspree The TV described in this manual may include copyrighted software of Hannspree or other third parties Hannspree or other third parties preserves the exclusive rights for copyrighted software such as the right to distribute or reproduce the copyrighted software Accordingly and to the extent allowed by applicable law any copyrighted software contained in the product described herein shall not be distributed modified reverse engineered or reproduced in any manner without the prior written authorization of Hannspree or of other third parties The Hannspree logos presented herein are trademarks of Hannspree All other product names trademarks or logos mentioned herein are used for identification purpose only and may be th
22. on Home Retail Saray Genin Set to reduce the TV s power consumption by lowering the Vibe backlight level On Off Time Sleep Timer Set the timer to turn the TV off at the preset time Off 5 min 10 min 15 min 30 min 45 min 60 min 90 min 120 min 150 min 180 min 240 min OSD Time Set the time to hide the on screen display OSD menu at the preset time 5S 10S 15S 20S 25S 30S 35 S 40S 45S 50S 55S 60S 65S 70S 75S 80S 85S 90S 95S 100S105S 1 10S 115S 120S Transparency Set the on screen display OSD transparency 0 10 Restore Default Reset all Setup settings to the factory default settings Reset the TV to factory default and erase all stored channels ENGLISH Factory Setting Notes The options available on the OSD may vary depending on the input signal source The default password for V Chip is 0000 Media Center Menu Your TV is equipped with a USB connector that enables you to view photos or listen to music stored on a USB storage device USB HEADPHONE OUT J 0 A Y YA 0 CABLEANTENNA DTV TV ul Device JFileFormat o o File System FAT16 FAT32 NTFS Photo File Format JPEG jpg Music Format MP3 mp3 HANNSpree 21 Basic Operation 1 Turn on the TV 2 Plug a USB device to the USB connector on the TV m Z E o E 3 Press INPUT on the remote control The Input Source menu appears 4
23. s are not available Make sure the video signal cable is connected properly Adjust the location of the antenna placing it far from roads or sources of interference Check the antenna and the video signal line connections Adjust the sharpness setting Choose programs with high quality signals Adjust the direction of the antenna or replace the video signal cable Make sure the battery is inserted correctly Replace the battery with a new one Make sure the TV power cord is plugged in Make sure the path between the remote control and the sensor is clear Try operating the remote control at a closer distance to the TV HANNSpree 23 o i O Z TT 5 Support Timing PC Mode Support Timing m Z 2 E o T 2 ox Vv s tozexres sme v Da azo xto2e core v e 16910950 cone Video Mode Support Timing y 1080i 1080p 24 HANNSpree 6 Specifications Model No 23 6 TV 59 9 cm 23 6 inches Aspect Ratio 16 9 1920 x 1080 o O Z TT Resolution OSD Language Sound Output RMS Watts Sound Mode Picture Format Picture Mode Rear Connectors Component Input PC IN D SUB and PC Audio HDMI 1 HDMI 2 HDMI 3 Side Connectors Earphone Output USB Tuner Input 75 Q Composite Inputs AV1 AV2 POWER SS SS HANNSpree 25
24. splay OSD menu on GIBI MD lt gt 4 Menu off 5 Input Press to select the proper input source 6 Power Press to turn the TV on or off 7 AC power switch Press to turn on or off the power supply HANNSpree 9 Input and Output Jacks ITI Please refer to the front cover illustration for the Input amp Output location c No Description Connector Function T Connect to earphones or external amplified 1 Earphone Output speakers O 2 USB Connect to a USB flash drive gt 3 Cable Antenna o Connect to an antenna or cable TV VIDEO O UDO Q AV INT Composite Input Connect to an external device such as a 4 AV1 AV2 VCR STB or a DVD player VIDEO Q 00 G AV IN2 AV IN2 YPbPr Connect to an external device such as a a a pM VCR STB or a DVD player 6 VGA Audio Input o Connect to a PC line audio port 7 VGA PO Input Connect to a PC VGA port Connect a HDMI equipment or an HDMI 8 M tenes DVI adapter cable to devices such as a HDMI 3 Input 3 DVD player or set top box 9 AC IN Input Connect to the included power cord 10 HANNSpree Remote Control INPUT Press to select the input signal Keypad Press to select a program directly Press 0 9 to enter the program numbers press 1 and O for program 10 DASH Press to select the DTV sub channel INFO Press to display program information if available OK Press to enter a submenu or activate a settin
25. to products purchased in Canada RISK OF ELECTRIC SHOCK DO NOT OPEN A Description of Warning Symbols AN WARNING This symbol is used to alert users to pay attention to important descriptions regarding usage maintenance repair and additional important information related to this TV 8 CAUTION This symbol is used to alert users to the risk of electric shocks due to dangerous and uninsulated components 2 HANNSpree A Safety Notices AN Installation Safety Notes Location Avoid allowing the TV to get prolonged exposure to sunlight or other strong sources of heat Leave sufficient distance between the TV and the wall to provide enough space for the emission of heat To reduce the risk of fire AN or electric shock do not expose this apparatus to rain or moisture Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so Installation e Do not place the TV in locations where there is excessive steam or dust e Avoid blocking the TV s vents do not place the TV on a bed sofa carpet or in a sealed cabinet e Install the outdoor antenna away from power transmission lines t
26. ure settings to the factory default settings Note The options available on the OSD may vary depending on the input signal source Audio ENGLISH Select a preset audio option optimized for different Equalizer sounding conditions Default Club Dance Live Pop Rock User and adjust the equalizer for 200HZ 300HZ 1KHZ 3KHZ 8KHZ or 15KHZ settings 6 6 Adjust a sound balance between the left and right Select an T Multi channel Television Sound option Mono Stereo SAP DTV AudioLang Some video formats support multiple audio language Use for DTV only this setting to select the preferred audio language Restore Default Restore Default Reset all Audio settings to the Reset all Audio settings to the factory default settings Reset all Audio settings to the factory default settings settings Note The options available on the OSD may vary depending on the input signal source Channel only for TV connection Select the tuner mode type Air Cable Auto Scan Automatically scan the channel search based on the selected tuner mode Manual Scan Select the TV scan mode DTV ATV Manual Select the correct signal source for Cable mode STD HRC IRC only Channel List Edit View the selected TV channel Delete Skip viewing the selected TV channel Add the channel manually into the Add channel list Fav List Edit Select the favorite TV channels Restore Default Reset all Channel settings to the
27. xceed an angle of 30 degrees when pointing at TV The operational distance may be shortened when the signal sensor is e Aim the transmitter on the remote control at the signal sensor and ensure that there are no obstacles between them HANNSpree 11 o O Z TT 2 Setting up your TV Power Connection m Z E o E 1 Connect the power cord to the AC IN input jack on the rear of the TV 2 Insert the plug at the other end of the power cord into a power outlet 3 Press the AC power switch to turn on the power supply Rear Connections See the illustration and table below for device connection instructions Connection Order Typical Layout HDMI is the best way to connect a device If it is not available move down the list in order until you find a connection that is available on each device O HDMI Q YPbPr AV 1 AV2 YPbPr Use HDMI to connect external devices when Use YPbPr available If not available to connect use YPbPr AV devices Pr Pb Y o 0 9 9 9 Antenna Cable Use this connection when you need to connect directly to an antenna or cable system instead of using a cable box Cable TV o A CABLE ANTENNA Antenna 9 100 Q m 1 USB HEADPHONE OUT I e Or ds Use AV1 AV2 to connect e SEEDS Bst AV devices e Be careful not to bend the VIDEO AV IN2 o 0 0 0 o o copper wire 12 HANNSpree Usi
28. xt gt Return HANNSpree 13 L o O Z TT f The channel scan may take a while to Installation Guide Autoscan complete Once the automatic search ends the TV automatically switches to the first channel found Current Frequency 69000000 Hz 0 Total Channels Found Status DTV Scanning Progress 3 Press Return to skip DTV scan m Z E o E 2 Return Selecting Your Content Source You can watch cable or broadcast TV play DVD or connect to your PC To select the source signal Input Source Press INPUT on the remote control The Input Source menu appears AV1 e Press A to highlight the desired source then press OK to confirm Performing an Automatic Channel Search Before using the TV to view programs you need to activate the channel search first 1 Press MENU on the remote control or the control panel to display the main menu 2 Select Channel gt Auto Scan 3 Press OK on the remote control to run the channel search Selecting Channels e Press CHA or CHYF on the remote control or CH or CH v on the control panel to increase decrease the program number Press the numeric buttons on the remote control 14 HANNSpree Adjusting the Volume Press VOL on the remote control or the control panel to increase the volume Press VOL on the remote control or the control panel to decrease the volume o O Z
Download Pdf Manuals
Related Search