Alcatel One Touch X220
Contents
1. lt Deactivate gt e Select an item in the connection profile list e Clickon lt Deactivate gt to release default setting 6 System settings Click Y to validate the sound prompt when the Intemet will be 11 connected disconnected 7 Request PIN e Clickon the lt Request PIN gt menu and select lt Ena ble Disable PIN gt Activate the PIN input dialog box e Select lt Enable PIN gt and enterthe correct PIN code e Clickon lt OK gt 8 Change PIN Click on lt Change PIN gt and activate the PIN modify dialog box Input the old PIN and the new PIN then confirm e Click on lt OK gt to confirm the new PIN code Note You can only access the modify menu if the PIN isenabled 9 Unlock U SIM Card Click on lt U SIM Unlock gt and activate the code which is requested in dialog box to unlock this function Then click on lt OK gt to confirm Note All about code is supplied by your network provider except PIN Code 10 Dia gnostic s Statistic This menu is used to display the diagnostic information including e Model Information Modem Name Firmware version IMEl IMSI e Operator Information PIN code status Network code Network selection mode Network mode Signal strength e Network Status CS network registration PS network registration PS network attachment 11 About You can get information on the version in the lt About gt menu 12 Help When the application is open you can read the instructions a2. Click on lt Delete gt in the tool bar A dialog box will ask Are you sure to delete the message s Click on lt OK gt and the SMS will be deleted Once deleted SMS messagescannot be restored Resend Accessthe Outbox to select a message or several messages using the ctn shift ke y Click on lt Resend gt in the tool bar The application will resend the unsent sent message s Export Select a message or several messages using the ctr shift key in the Current list Then right click mouse to export SMS to the chosen location and saved asa text file Contacts Click contacts from the main interface of PC suite to access the contacts management The contacts list column contains U SIM Modem Computer You can use contacts stored eitheron the U SIM modem oron computer in the corresponding window 1 New Select lt New gt from the tool barto accessthe contacts editor Enterthe relevant information and press lt K gt the new contact will appearin the current contact list 2 Edit e Selecta contact and accessthe contact editor by selecting lt Edit gt from the tool barorby double clicking on the contact Modify the relevant contact information and select lt OK gt to save the changes 3 Delete e Select one contact or more using the ctr shift key e Click on Delete gt from the tool bar A dialog box will ask Are you sure to delete the contacts e Clickon lt OK gt and the contac
3. the main interface continues to display Searching device lt Initializing gt A Please remove the modem and reinsert it Q What should do if the SIM USUM card is unplugged during the application A Please disconnect the modem first and then restart the application Q The SIM USIM card does not register any networks A The reasonsare shown below 1 Unstable local signal 2 The software isan old version 14 3 Hardware problem You may 1 Try to logon from another location 2 Update the software 3 Checkthe hardware oruse anotherdata card and retry Why does the prompt No available connection profile Please set an available default one in connection profile appear Please add a connection profile manually Itfailed to connectto the intemet Please make sure the connection profile and settings are correct 8 Q The connection speed and data transfer rates are too slow A 9 Q A 10 0 11 0 12 0 Please check the local network signal strength Sending an SMS failed Please make sure the SMS centernumberis correct I cannot receive an SMS Please check whether your SIM USIM card s memory is full Why can I only save part of the name when adding a new contact The SIM USIM card can only hold 12 SBC characters and 6 DBC characters Does it support roaming This depends on the local operator Please check with your local operatoror service prov
4. Received SMS will be saved the modem If the modem Memory is full the message will saved on USIM SIM 2 New SMS e Click on lt New gt in the shortcut menu bar An SMS creation window will pop up e Enterthe text 3 Send 1 You ma y entera recipient snumber in 3 ways e Enterthe number directly If there are two or more recipients use to separate each e Enterthe name ofa recipient saved in the phonebook e Click Icon of SMS in the pop up the window to access the recipient s selection window Select one party or more using the ctr shift key and the click on lt OK gt to add the chosen party ies to the recipient list 2 Click on lt Send gt to send the message If the message is not sent it 4 will be saved in the Outbox Reply Select a message in the inbox and then click on lt Reply gt in the shortcut menu bar The recipient s number will appear It can now be modified Enter the reply in input field and then click on lt Send gt Forward Selecta message and then click on Forward gt in the shortcut menu bar The content of the selected message will appear in the input field It can now be modified Enter the recipient s numberand then click on lt Send gt Edit Access the draft list to select a message and open it by double clicking on it Click on lt Save gt or lt Send gt when you have finished editing Delete Selecta message or several messages using the ctn shift ke y
5. User Manual Table of Contents Safety and US oiean a peda ete a 2 Instalator G de eaa O E EATE 4 Main Interface Overview cai at A ada 4 Entrance to Main Interface cta Aisa 5 CONNECT temet aci a e a aa 6 SMS Services Te XE SSS CS nt it 7 CONOS at tt tad 9 A A A A EE EN 10 Wanadoo 13 A wi ax veces bog es E e coved vind saree Sao le woes eevee op eed See oda ECA aaa eds 14 Installation Guide TOT AC dba 15 Safety and Use We recommend that you read this chapter carefully before using your modem The manufacturer disclaims any liability for damage which may result asa consequence of improper use of the modem or of use contrary to the instructions contained herein Traffic Safety When driving do not use the modem lt gt When switched on the modem emits electromagnetic waves that can interfere with the vehicle s electronic systems such as ABS anti lock brakes or airbags To ensure that there is no problem please do not place the modem on top of the dashboard or within an airbag deployment area Check with your car dealer or the car manufacturer to make sure that the dashboard isadequately shielded from modem RF energy Conditions of Use 1 2 Switch the modem off before boarding an aircraft Switch the modem off when you are in health care facilities except in designated areas As with many othertypes of equipment now in regular use mobile telemodems can interfere with other electrical orelectronic devices orequi
6. bout the modem 12 Amen The modem is warmanted against any deviation from technical specifications for a period of twelve 12 months from the date specified on your original invoice Under the terms of this warranty you must immediately inform your vendorin case of a conformity defect on the modem and presenta proof of purchase The vendor or repair centre will decide whether to replace or repair aSappropnate the modem Repaired orreplaced modems are warranted ONE 1 month unless there are statutory provisions to the contrary This warranty shall not apply to damage or defects to the modem due to not following of the instructions for use or installation not being compliant with technical and safety standards applicable in the geographical area where the modem is used improper maintenance of sources of energy and of the overall electric installation accidents or consequences of theft of the vehicle in which the modem is transported acts of vandalism lightning fire humidity infiltration of liquids inclement weather connecting to or integrating into the modem any equipment not supplied ornot recommended by the manufacturer any servicing modification or repair performed by individuals not authorised the manufacture the vendor or the approved maintenance centre use of the modem fora purpose other than that for which it was designed nomal wear malfunctions caused by extemal causes e g radio interference from other equ
7. f Although no danger relating to the use of modem wasever proved the World Health Organization advises asa precautionary measure to use your modem with a good level of network reception asindicated on the software display 4 to 5 bars It is also advised to keep the modem during communications away from the belly of pregnant women and from the lower abdomen for teenagers The modem is equipped with a built in antenna For optimal operation you should avoid touching it ordegrading it General Information Intemet address www alcatel mobilephones com Customer Support Hot Line Number see TCT Mobile Services leaflet or go to our Intemet site Do not allow the modem to be exposed to adverse weather or environmental conditions moisture humidity rain infiltration of liquids dust sea air etc The manufacturers recommended operating temperature range is 10 C to 50 C lt gt As mobile devices offer a range of functions they can be used in positions other than against your ear In such circumstances the device will be compliant with the guidelines when used with HSPA Modem If you are not using HSPA Modem ensure that whatever product is used is free of any metal and that it positions the phone at least 2cm away from the body 19 Alcatel isa trademark of Alcatel Lucent used under license by TCT Mobile Limited All rights reserved 2009 2010 TCT Mobile Limited TCT Mobile Limited reserves the right in the cust
8. ide a connection to the network In theory the closer you are to a base station antenna the lowerthe powerlevel required by the modem The highest tested SAR value for thismodem compliance against the standard is 1 703W kg for use at the ear and 0 747W kg for use closed to the body l The ICNIRP requirements are applicable in the following regions Central America except Mexico South America North and South Africa Pacific Asia except Korea Australia gt The European recommendation 1999 519 EC is applicable in the following regions Europe Isra el 18 distance of 5mm While there may be difference between the SAR levels on various modems and at various positions they all meet the relevant Intemational guidelines and EU requirement for RF radio waves exposure For body wom operation the modem meets EU exposure guidelines provided that it is used with a non metallic accessory with the handset at least 1 5cm from the body The Word Health Organization WHO consders that present scientific information does not indicate the need for any special precautions for use of Modems If individuals are concemed they might choose to limit their own or their children s RF exposure by limiting the length of calls or using hands free devicesto keep modems away from the head and body fact sheet n 193 Additional information about electromagnetic fields and public health are available on the following site http www who int peh em
9. ider Installation Guide forMac This manual describes the operations of the connect application This application requires MAC OS X10 4 9 orlater 1 To install the MODEM connect application on MAC OS X Please 15 double click the file HSPA USB MO DEM pkg ke autorun inf HSPA USB MODEM y Install exe 2 Click Continue Welcome to the HSPA USB MODEM Installer You will be guided through the steps necessary to install this software 3 Select the MAC OS volume to install the application and click Continue Installation 16 Installing this software requires you to restart your computer when the installation is done Are you sure you want to install the software now 4 When the installation is finished you will see the following window you need to restart your computerto use the modem Install Succeeded The software was successfully installed Click Restart to finish installing the software Co Back aaa 5 Clicking Application gt HSPA USB MODEM to start the connect application You may install this application in the Dock to access it faster 17 Radio Waves Proof of compliance with intemational standards ICNIRP or with European Directive 1999 5 EC R amp TIE is required of all Modem models before they can be put on the market The protection of the health and safety forthe user and any other person is an essential requirement of these standards or this directi
10. ion manually 2 AMicro SD card isan optional accessory 3 Please do not remove the USIM SIM card and orthe Micro SD card when the modem isin use Upon successful installation of the HSPA management program the program will launch automatically You may also double c lick the short cuticon on the desktop to launch the program Main Interface Overview Following table are listed Short Cut Icons in PC Suite Interface Interface Icons Provided Services Home Home Page Click on lt Connect gt icon from the main window to connect disconnect from the Intemet Contacts Display The Phones Book Interface SMS Display The Text Message Interface Browser Open the Browser Settings Display the Settings manual Following table are listed the Icons of status bar information Connection Statistics Icon Network Signal Network Status Network Type Roaming New Message Network Connecting Description Indicates the signal strength of the network Indicates the network status This will display the operator name which the modem can find the network Or show the modem haven t ready lt No U SIM gt or NO Device gt Display in the status bar to show you which network you are using GPRS EDGE UMTS or HSPA Roaming Icon o when the network is under roa ming Display the SMS status including new SMS SIM card memory is full Data Card memory is full Connecting Icon lug ispla y in the status bar when the network is connected int
11. ipment power voltage fluctuations faulty connections resulting from unsatisfactory radio transmission or caused by the absence of radio relay coverage Warranty is also excluded for the modems on which markings or serial numbers have been removed oraltered The mandatory warranty period may vary if overriding statutory provisions are applicable in your jurisdiction 13 The modem is also warranted against hidden defects defects inherent in the design manufacture etc There are other express warranties than this printed limited waranty express orimplied of any nature whatsoever In no event shall the manufacturer be liable for incidental or consequential damages of any nature whatsoever including but not limited to trading loss commercial loss to the full extent those damages can be disclaimed by law Some countries states do not allow the exclusion or limitation of incidental or consequential damages or limitation of the duration of implied warranties so the preceding limitations or exclusions may not apply to you FAQs 1 Q Which operation systems does the software support A It supports Windows 2000 Windows XP Windows Vista Windows 7 and Mac OS X 10 4 9 10 6 Q I cannot install the driver A On some PCs installation of the modem may take a long time because of the PC configuration So please wait and do not cancel the process or you will have to uninstall and re install again Q What should do if
12. ll search and register the network band which was chosen at next time of device connection 4 MS settings Choose lt SMS settings gt in the Settings menu to access the SMS settings window Service Center The default number is found in the U SIM card You may change it 10 e Validity period You can choose between 6 hours 1 day 1 week e Message Alert Click to validate the message alert sound 5 Connection profile settings Select lt Connection profile gt in the Settings menu to access the connection profile setting window lt ADD gt Adding a new connection profile Click on lt Settings gt and select the connect Profile to add a new connection e If lt ADD gt is selected the new connection profile windows will pop up e Please enterthe info of requested e Account Connection Naming Number APN User Na me password and final choice which Auth Type you are using by manually e Click lt K gt e Please select you preferred network and click on lt Activate gt to default your connection setting lt Delete gt e Select an item in the connection profile list e Click on lt Delete gt on the keyboard You will be asked if you Are sure you delete e Choose lt OK gt to delete the profile from the list lt Modify gt e Select an item in the connection profile list e Clickon lt Modify gt to accessthe profile edit window e Modify the parametersand click on lt OK gt to save the modification
13. lt connection profile will be used in accordance with your USIM SIM card Connecting e Clickon lt Connect gt from the home page e Wait several seconds until the connection is established e Once you are connected Icon of lt Connect gt will change into lt Disc onnect gt Disconnecting Click on Icon of lt Disconnect gt from the home page to disconnect from the Intemet 2 Connecting with a user defined logon profile Click on settle icon and select the lt Connection Profile gt menu to open the profile setting window Adding a new connection profile e Click on lt Settings gt and select the connect Profile to add a new connection e If lt ADD gt is selected the new connection profile windows will pop up e Please enterthe info of requested e Account Connection Naming Number APN User Na me password and final choice which Auth Type you are using by manually e Click lt OK gt e Please select you preferred network and click on lt Activate gt to default your connection setting Note Users ma y obtain Number APN Code User Name Password and Auth type information from networks provider SMS Services Text Message Click SMSicon from the main interface of the PC suite to accessthe SMS service 1 Displaying the received SMS When a new message is received a message box appearsin the status bar e Click the content of the chosen message You may also display the content on the message window Note
14. o intemet network Following table are listed the LED Indicatesforeach status LED Indicator Desctiption Flashing Green Red multicolour Network Searching circularly Quickly Flashing Green amp Red multicolour Out of order circularly Green Light Slow Flashing Constant Green Light Red Light Slow Flashing Constant Red Light Registering into HSPA or UMTS network Registered to HSPA or UMTS network Registering into GPRS or EDGE network Registered to GPRS or EDGE network Entrance to Main Interface The application runs automatically and the main window will pop up when the modem will be connected You can also access and run the application from the lt Start gt menu If the PIN code is enabled please enter the correct PIN code in the entry field and click on lt OK gt You may try only 3 times to enter the correct PIN code after three incorrect attempts the USIM or SIM card willbe blocked A PUK dialog box will then be displayed asking you to enter the right PUK code PIN Code and Confirmed PIN Click on lt K gt if you fail to input the correct PUK code after 10 attempts you will need to contact yourservice provider If the PUK and PIN code iscorrect the application will be launched and all features are enabled Connectto Intemet 1 Connecting with the default logon profile If you want to connect to the Intemet without setting any user defined or predefined profiles press icon of connect The defau
15. omer s interest to alter material ortechnical specifications without prior notice 20
16. ot to be thrown into ordinary bins if your jurisdiction or your region has suitable recycling and collection facilities instead they are to be taken to collection points for them to be recycled In the United States please visit www recyclewirelessohonesorg for more information on recycling wireless products Protection against theft The modem is identified by an IMEI modem serial number shown on the packaging label and in the modem sdashboard We recommend that you note the number the first time you use the modem by opening the dashboard Settings gt Diagnostics to get it Disclaimer There may be certain differences between the user manual description and the modem s operation depending on the software release of the modem or specific operator services Installation Guide Insta llation procedures may vary based on the operating system installed on your PC The following instructions are based on the Windows XP OS Tum on your PC and plug the modem into the USB interface slot to begin software installation Windows should automatically detect the new device and will prompt you to begin installation After following the prompts of installation setup upon completion a shortc ut will be placed on your desktop for quic k future access Note 1 If installation auto run does not begin you will need to locate the autoRun exe file in the driver path and Double Click on AutoRun exe to run the installat
17. pment using radio frequencies Switch the modem off when you are neargasor flammable liquids Strictly obey all signs and instructions posted in a fuel depot petrol station chemical plant or in any potentially explosive atmosphere When the modem is switched on it should be kept at least 15 cm from any medical device such asa pacemaker a hearing aid or insulin pump etc Do not let children use the modem without supervision The modem may contain small parts that could become detached and create a choking hazard When replacing the cover please note that the modem may contain substancesthat could create an allergic reaction Always handle the modem with care and keep it in a clean and dust free place Do not open dismantle or attempt to repairthe modem yourself Do not drop throw orbend the modem 10 Do not paint the modem Collection Point ef This symbol on the modem means that it must be taken to r collection points at the end of their life Municipal waste disposalcenters with specific binsforthese items of equipment Collection bins at points of sale They will then be recycled preventing substances being disposed of in the environment so that their components can be reused In European Union countries These collection points are accessible free of charge All products with this symbol must be brought to these collection points In non European Union jurisdictions Items of equipment with this symbol are n
18. t s will be deleted deleted contacts will not be restored 4 Send SMS e Select one contact or more using ctr shift ke y e Clickon lt end SMS gt in the tool bar e When the message is completed you may send it by clicking on lt Send gt 5 Copy to U SIM card Modem Computer e Select one contact or more using ctr shift key stored in the same memory Right C lick your mouse pointer if selected lt Copy to gt in the manual and selecta target memory different from the memory being used Contact s will be copied to the target memory Settings Click on settings icon from the main interface of PC Suite A menu with various settings will appear Network select Select Network selection gt in the Settings menu The default setting is lt Auto gt Clickon lt Manual gt to activate the network list window A list of networks appears when the search is complete Click lt Search gt an available network from the list of available operatorsand click on lt Select gt It will register the selected network Network mode Select lt Network mode gt in Settings menu The default setting is lt Auto gt Click on the mode which you prefer it will search and register the network mode which was chosen at next time of device connection Network Band This function isdepend on product Select lt Network band gt in Settings menu The default setting is lt Auto gt Click on the band which you prefer it wi
19. ve THIS MODEM COMPUES WITH INTERNATIONAL AND EUROPEAN REQUIREMENTS REGARDING EXPOSURE TO RADIO WAVES The Modem isa radio transmitter receiver It was designed and manufactured to comply with the radiofrequency RF exposure thresholds recommended by intemational requirements ICNIRP 1 and by the Council of the European Union Recommendation 1999 519 EC 2 These limits are part of a set of requirements and establish authorised radiofrequency levels for the public These limits were established by independent groups of experts on the basis of regular and detailed scientific assessments They include a significant safety margin intended to ensure the safety of all regardless of age orstate of health The exposure standard for modems is determined by a measurement unit known as the Specific Absorption Rate or SAR The SAR limit is set by intemational requirements or by the Council of the European Union at 2 watts kilogram W kg averaged over 10 gramsof body tissue The tests used to determine SAR levels were camed out on the basis of standard usage modes with the phones transmitting at their maximum power level over the entire range of frequency bands Although the SAR was established at the highest certified level the actual SAR level for the modem during use is generally much lower than the maximum values In fact since modems are designed to operate at many different power levels they only use the minimum level of power required to prov
Download Pdf Manuals
Related Search