DataVideo STC-100 video capture board
Contents
1. dalaviee STC 100 Standards Converter User s Guide http www datavideo tek com Rev 240106 Warnings and Precautions 10 11 12 13 Read all of these warnings and save them for later reference Follow all warnings and instructions marked on this unit Unplug this unit from the wall outlet before cleaning Do not use liquid or aerosol cleaners Use a damp cloth for cleaning Do not use this unit in or near water Do not place this unit on an unstable cart stand or table The unit may fall causing serious damage Slots and openings on the cabinet top back and bottom are provided for ventilation To ensure safe and reliable operation of this unit and to protect it from overheating do not block or cover these openings Do not place this unit on a bed sofa rug or similar surface as the ventilation openings on the bottom of the cabinet will be blocked This unit should never be placed near or over a heat register or radiator This unit should not be placed in a built in installation unless proper ventilation is provided This product should only be operated from the type of power source indicated on the marking label of the AC adapter If you are not sure of the type of power available consult your Datavideo dealer or your local power company Do not allow anything to rest on the power cord Do not locate this unit where the power cord will be walked on rolled over or otherwise stressed If an extension2. Lane Wanchai HK Tel 852 2833 1981 info datavideohk com www datavideohk com Warranty Datavideo warrants that the equipment it manufactures shall be free from defects in material and workmanship for a period of 12 months from the date of product purchased If equipment fails due to such defects Datavideo will at its option repair or provide a replacement for the defective part or product Equipment that fails after the warranty period has been operated or installed in a manner other than that specified by Datavideo or has been subjected to abuse or modification will be repaired for time and material charges at the Buyer s expense This warranty does not affect your statutory rights within the Country of purchase For EU Customers only WEEE Marking This symbol on the product indicates that it will not be treated as household waste It must be handed over to the applicable take back scheme for the recycling of electrical and electronic equipment For more detailed information about the recycling of this product please contact your local Datavideo office Contents INTRODUCTION WHAT S IN THE PACKAGE CONNECTION DIAGRAM FRONT PANEL REAR PANEL CONNECTION COLOR PROCESSOR FACTORY RESET SPECIFICATIONS 10 11 12 Introduction The Datavideo STC 100 is a high quality bi directional standards converter It can convert NTSC to PAL PAL to NTSC from Component YUV S Video Y C or Composite CVBS video sources T
3. cord must be used with this unit make sure that the total of the ampere ratings on the products plugged into the extension cord do not exceed the extension cord s rating Make sure that the total amperes of all the units that are plugged into a single wall outlet do not exceed 15 amperes Never push objects of any kind into this unit through the cabinet ventilation slots as they may touch dangerous voltage points or short out parts that could result in risk of fire or electric shock Never spill liquid of any kind onto or into this unit Except as specifically explained elsewhere in this manual do not attempt to service this product yourself Opening or removing covers that are marked Do Not Remove may expose you to dangerous voltage points or other risks and will void your warranty Refer all service issues to qualified service personnel Unplug this product from the wall outlet and refer to qualified service personnel under the following conditions a When the power cord is damaged or frayed b When liquid has spilled into the unit c When the product has been exposed to rain or water d When the product does not operate normally under normal operating conditions Adjust only those controls that are covered by the operating instructions in this manual improper adjustment of other controls may result in damage to the unit and may often require extensive work by a qualified technician to restore the unit to normal operation e When the
4. for a secure fit Once all connections are in place switch the STC 100 on using the On Off switch Composite CV S Video Y C and Stereo Audio In Out Use these connections for Composite or S Video Y C and unbalanced stereo audio In and Out The STC 100 can convert between formats i e S Video in to Composite out etc Component YUV Input Use these connections to connect Component YUV to the STC 100 YUV is the best possible video signal so if you have it available as an output option on your player it is always best to use it Component YUV Output with Black Burst Use these connections to connect Component YUV out from the STC 100 to your record deck Color Processor The built in color processor is very easy to use The memory is non volatile so settings are saved even when the STC 100 is powered off Setting the contrast brightness color saturation and tint TINT is only for NTSC Composite or S Video inputs follows a similar procedure In this example we are adjusting the contrast Make sure that you have a signal running from your video source player and a monitor connected to your record deck You should be able to see the video image from the player on the monitor To adjust the contrast press the CONTRAST Button The procedure would be the same if you wanted to adjust the brightness color saturation or tint TINT is only for NTSC Composite or S Video inputs COLOR PROCESSOR You will see the Co
5. product has been dropped or the cabinet has been damaged f When the product exhibits a distinct change in performance indicating a need for service Service and Support It is our goal to make your products ownership a satisfying experience Our supporting staff is avallable to assist you in setting up and operating your system Please refer to our web site www datavideo tek com for answers to common questions support requests or contact your local office below Datavideo Corporation USA 12300 U East Washington Blvd Whittier CA 90606 USA Tel 1 562 696 2324 contactus datavideo us www datavideo us Datavideo Technologies Europe BV Californiedreef 26 3565 BL Utrecht The Netherlands Tel 31 30 261 9656 info datavideo nl www datavideo info Datavideo UK Limited Unit 2 Waterside Business Park Hadfield Glossop Derbyshire SK13 1BE UK Tel 44 1457 851000 sales datavideo co uk www datavideo info Datavideo Technologies Co Ltd 10F 176 Jian Yi Rd Chung Ho City Taipei Hsien Taiwan 235 Tel 886 2 8227 2888 service datavideo com tw www datavideo com tw Datavideo Technologies China Co 2F D 2 Lane 777 West Guangzhong Zhabei District Shanghai China Tel 86 21 5603 6599 service datavideo cn www datavideo cn Datavideo Technologies S PTE Ltd No 100 Lorong 23 Geylang 01 03 D Centennial Bldg Singapore 388398 Tel 65 6749 6866 info datavideo sg www datavideo info Datavideo Hong Kong Limited G F 26 Cross
6. ge using the built in color processor Press the button of the attribute that you want to adjust then use the or buttons to change the setting TINT works on NTSC Composite and S Video Y C input only For further details see page 10 NTSC PAL Output The output can be set to NTSC or PAL If the button is illuminated the output is set to PAL The STC 100 automatically sets the input to PAL or NTSC according to the video signal BRIGHTNESS CONTRAST J COLOR O NTSC Ki PAL 7 5 IRE COLOR PROCESSOR 0 IRE 7 5 IRE The black level output for NTSC can be set to 0 or 7 5 IRE For North American NTSC use 7 5 for Japanese NTSC use 0 If the button is illuminated 7 5 IRE is selected Audio Calibration Allows you to set the audio level to avoid distortion Ideally the first yellow light should be almost constant and the red light should only light up occasionally when loud noises occur Rear Panel Connections POWER DC INPUT le 12 V MODEL 5 100 www dotaovideo lek com R t VIDEO Y C T d L f Y E E 2 2 AP f H 1 H 2 s 5 DC INPUT I 2 s gt 12 1 7 v O O E S MADEINTAIWAN Power In Socket and On Switch Connect the supplied power adaptor to the DC Input socket Once the plug has been inserted the locking collar can be screwed into place
7. he built in TBC ensures optimum quality is maintained The STC 100 can also convert from 0 IRE to 7 5 IRE and also from one format to another i e S Video to Composite etc What s in the Package STC 100 unit 3 x 1 2M BNC BNC Cable 1 x 1 2M S Video S Video Cable 12V DC Power Adaptor 100 240V AC input 12V 1 5 A output User s Guide P Lo em Connection diagram There are many possible combinations of connections to and from the STC 100 In this example a Component YUV PAL video signal is being converted to a Component YUV NTSC Video signal The principle is always the same you connect a playback device of one standard to the inputs of the STC 100 and a record deck of the other standard to the output from the STC 100 The STC 100 automatically recognizes the input as PAL or NTSC so you only need to select the output format Front Panel PAL NTSC STANDARDS CONVERTER YUV S Y C CV NISC OIRE 7 5 IRE O PAL rn COLOR PROCESSOR EA TINT maa COLOR PROCESSOR O 01 9 5 IRE NTSC PAL YUV NV CV AUDIO CALIBRATION 10 5 0 3 5 di r3 E TINT IO ORE n 107 SIRE sTC 100 Input Select YUV S Y C CV Composite Select the video input format that you intend to use The button of the selected input will glow red Contrast Brightness Color Tint Adjustments You can adjust the video ima
8. ntrast setting bar appear at Contrast the bottom of the TV screen BRIGHTNESS TINT To reduce the contrast press the button dic O NTSC O0IRE PAL 07 5 IRE COLOR PROCESSOR Repeated presses of the button will gradually a Contrast decrease the contrast BRIG To increase the contrast press the button TINT COLOR PROCESSOR Repeated presses of the button will gradually Contrast increase the contrast Once set as required press the CONTRAST button to exit the setting bar will disappear from the TV monitor BRIGHTN m s TINT To reset any value contrast brightness color or tint press and hold the or button for four seconds O NTSC OIRE 7 5 IRE COLOR PROCESSOR Factory Reset Factory reset will return all color processor settings to neutral factory default To return the STC 100 to factory defaults press and hold the YUV button for 5 seconds You will see the selected video input light YUV S Y C CV flash three times when reset has taken place Specification Input Video CVBS S Video YUV input Audio RCA Phono Unbalanced Stereo Output Video CVBS S Y C YUV Black Burst output Audio RCA Phono Unbalanced Stereo Video Processing Component 8 bit 4 2 2 Y 13 5MHz Frame Synchronization Full Frame Frequency Response S input 4 5 MHz 3dB DG DP 3 3 S N Ratio gt 50 dB Video Cor
9. rection Brightness 10 Contrast 3dB Color 3 10dB Tint 10 NTSC CVBS and S Video Y C input only Audio level calibration S N Ratio gt 60dB THD lt 0 1 Analog Bandwidth 20Hz 20kHz 3dB General AC Power Input 90 to 240V auto switching DC Power Output 12V 1A AC adapter included Ambient Temperature 32 131 F 0 55 C Ambient Humidity Less than 90 12 All the trademarks are the properties of their respective owners Datavideo Technologies Co Ltd All rights reserved 2006 P N 082060382E2 13
Download Pdf Manuals
Related Search