Vantec NexStar DX NST-530S2
Contents
1. Windows ME XP 2000 VISTA NST 53052 1 No drivers are necessary when using Windows ME XP 2000 Vista If the device does not appear under My Computer you may need to install drivers for the 5 25 device not Nexstar DX Please refer to the 5 25 device s instructions on how to install its drivers Windows 98SE USB NST 53052 1 If this is the first time you are using the Nexstar DX unplug the Nexstar DX if you currently have it connected If the Add New Hardware Wizard dialog box is open close it 2 Insert the driver CD into your CD Rom drive 3 If the CD does not autoplay open the drivers CD and run SETUP EXE 4 Follow the on screen prompts to complete the installation of the USB drivers for the Nexstar DX 5 After the install is completely the install program will create the shortcut USB SAFE REMOVER on your desktop A green Unplug or Eject hardware icon will appear in the system tray too If the device does not appear under My Computer you may need to install drivers for the 5 25 device not Nexstar DX Please refer to the 5 25 device s instructions on how to install its drivers 6 Repeat the steps listed under Connecting the Nexstar DX to your computer Installation Nexstar DX External 5 25 IDE Enclosure 9 10 Mac OS 9 0 or later NST 53052 1 No drivers are necessary when using Windows ME XP 2000 If the device does not appear under My Computer you may need to install drivers for2. the 5 25 device not Nexstar DX Please refer to the 5 25 device s instructions on how to install its drivers Note If you are using Toaster as your CD recorder software in Mac OS 9 0 or later you must install the USB 2 0 extension driver for Toaster Please check http www roxio com for more information Mac OS 8 6 NST 53052 1 Unplug the Nexstar DX if you currently have it connected 2 USB Mass Storage Support 1 3 5 must be installed on your system If it is not you can download the USB Mass Storage Support 1 3 5 from the Apple Software Updates website http www apple com support 3 Follow the direction associated with the USB Mass Storage Support driver to install 4 Repeat the steps listed under Connecting the Nexstar DX to your computer Installation Nexstar DX External 5 25 IDE Enclosure 6 Disconnecting the Nexstar DX Warning NEVER remove the Nexstar DX while the device in the enclosure is in use Doing so may damage the device in the enclosure the Nexstar DX or the computer Windows 98SE ME XP 2000 VISTA 1 Make sure all operations using the hard drive within the Nexstar DX has ceased 2 Close any windows and programs pertaining to the Nexstar DX 3 Ifa CD DVD drive is installed in the Nexstar DX eject any CD DVD media in the tray 4 If connected by USB double click the green Unplug or Eject Hardware icon in the system tray and select Safely Remove Hardware Select
3. the device you wish to remove and click on Stop The system should prompt It is now safe to remove the USB device If not wait for any programs still using the device to finish and try again 6 Turn off the Nexstar DX 5 Unplug the USB Firewire cable from the system Mac OS 1 Make sure all operations using the hard drive within the Nexstar DX has ceased 2 Close any windows and programs pertaining to the Nexstar DX 3 If a drive is mounted to the desktop drag the Nexstar DX drive to the trash If a CD DVD drive is installed in the Nexstar DX eject any CD DVD media in the tray 4 Turn off the Nexstar DX 5 Unplug the USB Firewire cable from the system Disconnecting the Nexstar DX 11 7 Troubleshooting FAQ Nexstar DX External 5 25 SATA Enclosure Q What should the jumper settings on my 5 25 SATA device be set to A We recommend the 5 25 SATA device be set to MASTER Q My computer recognizes the Nexstar DX but it does not mount the device A Your device may require its own additional drivers separate from the Nexstar DX drivers Please follow the installation instructions that come with your 5 25 SATA device If you are using a Mac system please note that for CD DVD drives the drive will only mount on your desktop when there is CD DVD media inserted Q My computer sometimes recognizes the Nexstar DX but sometimes gives me errors A If your computer is giving you problems with the Ne
4. A Cable Audio Cable Power Cable Parts Layout 5 Nexstar DX External 5 25 SATA Enclosure 5 1 Hardware Installation Preparing the 5 25 device 1 Set the jumper on the device to MASTER if applicable Please refer to the documentation included with your device for information on how to accom plish this 2 Remove the back plate from the enclosure and slide the tray out from the housing Installation Nexstar DX External 5 25 SATA Enclosure Installing the 5 25 SATA device in the NexStar DX 3 Connect the SATA cable and power cable to the 5 25 device as pictured below Ifyour device supports external audio connect the audio cable to the device with the RED wire corresponding to the R and the WHITE wire corresponding to the L on the device 4 Set the 5 25 device into the tray so that the holes in the device line up with the holes in the tray Align the device so that the front of the device is flush with the front of the NexStar DX Using the included screws attach the device to the tray 5 Slide the housing back onto the tray Attach the back plate to the enclosure and attach with the two screws provided Installation Nexstar DX External 5 25 SATA Enclosure 7 Note When removing the 5 25 device from the Nexstar DX be careful not to yank on the SATA cable or the power cable To remove the SATA cable grasp the cable between your thumb and index finger and gently pull at the sides
5. VANTEC NexStar OX EXTERNAL 5 25 SATA ENCLOSURE USER MANUAL SERIAL www vantecusa com Package Contents Nexstar DX External 5 25 SATA Enclosure NST 53052 Driver CD e User Manual e NexStar DX External 5 25 SATA Enclosure e Power Cable USB Cable e Screws TRADEMARKS MS DOS Microsoft Windows 95 98 NT 2000 ME XP VISTA are trademarks of Microsoft Corporation Apple Macintosh and Mac are trademarks of Apple Computer All other third party brands and names are the property of their respective owners Table of Contents DAA UA i pg 2 2 Specifications Features Nexstar DX External 5 25 SATA Enclosure 3 System Requirements iii iia 4 Parts Layout Nexstar DX External 5 25 SATA Enclosure cc ssssssssssssssssssscsssecsssccssscesseccssccsscesseecsaeessess pg 5 5 Installation Nexstar DX External 5 25 SATA Enclosure 5 1 Hardware Installation sssssssssccssscssccssecseccssesssccssecssccssecsecessecseeessecsecessesseeeneeeseesss p9 6 5 2 Driver Installation 6 Disconnecting the Nexstar DX Nexstar DX External 5 25 SATA Enclosure 7 Troubleshooting FAQ Nexstar DX External 5 25 SATA Enclosure ccssssscsssscssssssssesssscssnscsssscsssscessecessecessecesseessess p9g 12 8 Warranty 9 Contact Table of Contents 1 1 Introduction With the Vantec NexStar DX External 5 25 SATA Enclosure you can easily add any 5 25 SATA Device to your existing system The NexStar DX con
6. nects to your computer through USB 2 0 offering speeds up to 480Mbps and eliminating the need to open your system The NexStar DX is perfect for anyone looking to add any 5 25 SATA device such as a DVD burner to a notebook or desktop computer Because you don t have to open your computer you don t have to worry about voiding your existing warranty or dealing with messy wires The integrated fan and aluminum case also keep your device cool and operating at optimum conditions The NexStar DX External 5 25 SATA Enclosure is the smart way to upgrade your computer 2 Introduction 2 Specifications Features Nexstar DX External 5 25 SATA Enclosure Specifications Interface SATA to USB 2 0 e Dimension 251 5 x 172 x 49 mm Features Aluminum case Integrated 40mm Cooling Fan Transfer Rates Up to 12Mbps With USB 1 1 Transfer Rates Up to 480Mbps With USB 2 0 Easily Add A 5 25 SATA Device to Any System With USB Hot Swappable Plug Play Without Rebooting Easy Installation No Need To Open Computer Specifications Features 3 System Requirements Intel Pentium Il 350MHz compatible or Apple G3 processor and greater Microsoft Windows 98SE ME 2000 XP VISTA or Mac OS 8 6 and greater USB equipped system For USB 2 0 speeds the system must support USB 2 0 specifications CD Rom drive if drivers are needed 4 System Requirements 4 Parts Layout Nexstar DX External 5 25 SATA Enclosure SAT
7. until the cable comes loose To remove the power cable grasp the sides of the plug and pull Connecting the Nexstar DX to your computer 1 Connect the appropriate interface cable between the Nexstar DX and your computer a USB Connect the type B connector to the Nexstar DX and the type A connector to an available USB 1 1 2 0 port on your system 2 Connect the power cable to the Nexstar DX and plug the cable into an available outlet 3 Turn on the Nexstar DX via the power switch 4 Your operating system should detect the Nexstar DX and automatically install the necessary drivers if you have Windows 98SE MacOS 8 6 you will need to install drivers Once your operating system finishes setting up the Nexstar DX it will mount your new device and assign a drive letter If the device does not mount you may need to install drivers for the 5 25 device not Nexstar DX Please refer to the 5 25 device s instructions on how to install its drivers 5 The 5 25 device in the Nexstar DX Enclosure is now ready for use Using the Audio Jack 1 If you have connected the audio cable to your 5 25 device you can access the audio from that device TEA through the included Audio Jack labeled AUDIO s as pictured on right Using a standard 3 5mm plug 3 you can connect the Nexstar DX to a pair of si headphones or to a speaker setup Installation Nexstar DX External 5 25 IDE SATA Enclosure 5 2 Driver Installation
8. xstar DX be sure to connect the USB cable to a rear port directly off the motherboard or USB PCI card The cables connecting front USB ports are not always properly shielded and cannot properly handle USB 2 0 speeds thereby corrupting the signal between the Nexstar DX and the computer Q Why am I getting Delayed Write Errors in Windows XP 2000 A Windows XP 2000 tries to write 512K packets of data to through FireWire occasion ally which is much more than what is supposed to be written 128K packets Micro soft has since released a patch for Windows XP with its Service Pack 2 release A similar fix should be available for Windows 2000 through Microsoft s website 12 Troubleshooting FAQ 8 Warranty The Nexstar DX comes with a 1 year limited warranty 90 day parts If your unit should become defective within that time frame please go to http www vantecusa com for information on how to receive warranty exchange or repair Cosmetic defects and missing parts are not covered under this warranty Please check the contents of the unit to make sure you received all parts Also check for any cosmetic flaws If any parts are missing or if there are cosmetic defects please contact the retailer from which you purchased the unit immediately and ask for a replacement 9 Contact Vantec Thermal Technologies 43951 Boscell Rd Fremont CA 94538 tel 510 668 0368 fax 510 668 0367 website www vantecusa com Warranty Contact 13
Download Pdf Manuals
Related Search