Lancom Systems L-305agn
Contents
1. LANCOM L 305agn Wireless Business class dualband MIMO access point for high speed secure and reliable wireless access of upto 300 Mbps 802 11n Draft 2 0 access point with support for 3x3 MIMO Multiple Input Multiple Output technology Integrated MIMO Antenna Array Direct support available on the LANCOM WLAN Controller without expensive software upgrades Access point runs on industry standard 802 3af Power over Ethernet Secure wireless LAN through IEEE 802 11i IEEE 802 1x EAP LEPS with AES encryption in hardware Integrated DSL router incl LANCOM high security firewall Separation of user groups by Multi SSID and VLAN Optional Hotspot support LANCOM Systems The LANCOM L 305agn Wireless is a single radio access point that is compliant with the IEEE 802 11n Draft 2 0 Standard and offers a maximum WLAN performance of upto 300 Mbps The Access Point works in the 2 4 GHz and 5 GHz frequencies The 5 GHz frequency is interference free and is ideal for high throughput transmission The L 305agn can be configured in standalone managed and client modus In managed modus the access point can be securely managed by the LANCOM WLAN Controller More Performance The 802 11n Draft 2 0 standard includes several mechanisms such as MIMO 40 MHz channels packet aggregation and block acknowledgement which significantly increase the amount of bandwidth available for user applications With throughput rates up to 300 Mbps this repre2. Firewalling QoS VLAN Routing etc HTTP HTTP and HTTPS server for configuration by web interface DNS DNS client DNS server DNS relay DNS proxy and dynamic DNS client DHCP DHCP client DHCP relay and DHCP server with autodetection NetBIOS NetBIOS IP proxy NTP NTP client and SNTP server automatic adjustment for daylight saving time Policy based routing Policy based routing based on routing tags Based on firewall rules certain data types are marked for specific routing e g to particular remote sites or lines Dynamic routing Dynamic routing with RIPv2 Learning and propagating routes separate settings for LAN and WAN Extended RIPv2 including HopCount Poisoned Reverse Triggered Update for LAN acc to RFC 2453 and WAN acc to RFC 2091 as well as filter options for propagation of routes Rapid Spanning Tree LAN protocols IP WAN protocols Ethernet Interfaces LAN 802 1d Spanning Tree and 802 1w Rapid Spanning Tree support for dynamic path selection with redundant layer 2 connections ARP proxy ARP BOOTP DHCP DNS HTTP HTTPS IP ICMP NTP SNTP NetBIOS PPPoE server RADIUS RIP 1 RIP 2 RTP SIP SNMP TCP TFTP UDP VRRP PPPoE Multi PPPoE ML PPP PPTP PAC or PNS and plain Ethernet with or without DHCP RIP 1 RIP 2 VLAN 10 100 1000 Base TX autosensing auto node hub PoE compliant with IEEE 802 3af DSL over LAN DSLoL The LAN port can even parallel to
3. LAN mode be used as a WAN port for connecting external DSL modems PPPoE or external routers Serial interface Management Serial configuration interface COM port 8 pin Mini DIN 9 600 115 000 baud suitable for optional connection of analog GPRS modems LANconfig Configuration program for Microsoft Windows incl convenient Setup Wizards Optional group configuration simultaneous remote configuration and management of multiple devices over IP connection HTTPS HTTP TFTP Configuration program preferences per project or user or global LANmonitor Monitoring application for Microsoft Windows for remote surveillance and logging of the status of LANCOM devices and connections incl PING diagnosis and TRACE with filters and save to file WLANmonitor Monitoring application for Microsoft Windows for the visualization and monitoring of LANCOM WLAN installations incl Rogue AP and Rogue Client visualization Webconfig Integrated web server for the configuration of LANCOM devices via Internet browsers with HTTPS or HTTP Access rights Individual access and function rights for up to 16 administrators User administration RADIUS user administration for dial in access PPP PPTP Support for RADSEC Secure RADIUS providing secure communication with RADIUS servers Remote maintenance Remote configuration with Telnet SSL SSH with password or public key browser HTTP HTTPS TFTP or SNMP firmware uploa
4. 15 40 MHz Receiver sensitivity 5 GHz 802 11a h 95 dBm 6 MBit s 82 dBm 54 MBit s 802 11n 95 dBm 6 5 Mbps MCSO 20 MHz 77 dBm 65 Mbps MCS7 20 MHz 94 dBm 13 Mbps MCS8 20 MHz 74 dBm 130 Mbps MCS15 20 MHz 91 dBm 15 Mbps MCSO 40 MHz 74 dBm 150 Mbps MCS7 40 MHz 91 dBm 30 Mbps MCS8 40 MHz 70 dBm 300 Mbps MCS15 40 MHz Radio channels 2 4 GHz Up to 13 channels max 3 non overlapping 2 4 GHz band Radio channels 5 GHz Up to 19 non overlapping channels 5 GHz band with automatic dynamic channel selection DFS 2 Roaming Seamless handover between radio cells IAPP support IEEE 802 11d support 802 111 fast roaming Pre authentication and PMK caching for fast roaming Fast client roaming With background scanning moving LANCOM client mode access points pre authenticate to alternative access points which offer a better signal before Roaming VLAN VLAN ID definable per interface WLAN SSID point to point connection and routing context 4094 IDs Dynamic VLAN assignment Dynamic VLAN assignment for target user groups based on MAC addresses BSSID or SSID by means of external RADIUS server Q in Q tagging Support of layered 802 1q VLANs Multi SSID Simultaneous use of up to 8 independent WLAN networks per WLAN interface Security IEEE 802 111 WPA2 with passphrase or 802 1x and hardware accelerated AES closed network WEP64 WEP128
5. EE 802 11n Draft 2 0 with MSC15 Fallback to 6 5 Mbps with MSCO Range 802 1 1a b g Up to 150 m up to 30 m in buildings Range 802 11n Up to 250 m 6 5 Mbps up to 20 m 300 Mbps indoor Maximum transmission power 2 4 GHz 802 11b 19 dBm 1 and 2 Mbps 19 dBm 5 5 und 11 Mbps Maximum transmission power 2 4 GHz Output power at antenna connector 802 11g 18 dBm 6 to 36 Mbps 17 dBm 48 Mbps 16 dBm 54 Mbps 802 11n 19 dBm 6 5 13 Mbps MCS0 8 20 MHz 10 dBm 65 130 Mbps MCS7 15 20 MHz 17 dBm 15 30 Mbps MCS0 8 40 MHz 10 dBm 150 300 Mbps MCS7 15 40 MHz Maximum transmission power 5 GHz Output power at antenna connector 802 11a h 18 dBm 6 to 24 Mbps 17 dBm 36 Mbps 16 dBm 48 Mbps 15 dBm 54 Mbps 802 11n 18 dBm 6 5 13 Mbps MCS0 8 20 MHz 10 dBm 65 130 Mbps MCS7 15 20 MHz 17 dBm 15 30 Mbps MCS0 8 40 MHz 10 dBm 150 300 Mbps MCS7 15 40 MHz Minimum transmission power Transmission power reduction in software in 1 dB steps to min 0 5 dBm Receiver sensitivity 2 4 GHz 802 11b 91 dBm 11 MBit s 96 dBm 1 MBit s 802 11g 96 dBm 6 MBit s 83 dBm 54 MBit s 802 11n 96 dBm 6 5 Mbps MCSO 20 MHz 79 dBm 65 Mbps MCS7 20 MHz 95 dBm 13 Mbps MCS8 20 MHz 75 dBm 130 Mbps MCS15 20 MHz 90 dBm 15 Mbps MCSO 40 MHz 75 dBm 150 Mbps MCS7 40 MHz 90 dBm 30 Mbps MCS8 40 MHz 71 dBm 300 Mbps MCS
6. LAN IP router NAT Reverse NAT IP masquerading DHCP server DHCP client DHCP relay server DNS server PPPoE client incl Multi PPPoE PPTP client and server NetBIOS proxy DynDNS client NTP port mapping policy based routing based on routing tags tagging based on firewall rules dynamic routing with RIPv2 VRRP spanning tree protocol to support redundant routes in Ethernet networks WLAN client Firewall Stateful inspection firewall Transparent WLAN client mode for wireless Ethernet extensions e g connecting PCs or printers by Ethernet up to 64 MAC addresses Incoming Outgoing Traffic inspection based on connection information Packet filter Check based on the header information of an IP packet IP or MAC source destination addresses source destination ports DiffServ attribute remote site dependant direction dependant bandwidth dependant Extended port forwarding Network Address Translation NAT based on protocol and WAN address i e to make internal webservers accessible from WAN N N IP address mapping N N IP address mapping for translation of IP addresses or entire networks Quality of Service Traffic shaping Tagging The firewall marks packets with routing tags e g for policy based routing Actions Forward drop reject block sender address close destination port disconnect Notification Via e mail SYSLOG or SNMP trap Dynamic bandwidth management with IP traffic shaping Bandw
7. P authentication mechanisms PAP CHAP and MS CHAP as PPP authentication mechanisms WLAN protocol filters Limitation of the allowed transfer protocols source and target addresses on the WLAN interface Adjustable reset button Adjustable reset button for ignore boot only and reset or boot IP redirect Fixed redirection of any packet received over the WLAN interface to a dedicated target address LAN CO M L 3 o5ag n Wi reless Scope of features as of LCOS version 7 5 High availability redundancy VRRP VRRP Virtual Router Redundancy Protocol for backup in case of failure of a device or remote station Enables passive standby groups or reciprocal backup between multiple active devices including load balancing and user definable backup priorities FirmSafe For completely safe software upgrades thanks to two stored firmware versions incl test mode for firmware updates Analog GSM modem backup Optional operation of an analog or GSM modem at the serial interface Line monitoring Routing functions Router Line monitoring with LCP echo monitoring up to 4 addresses for end to end monitoring with ICMP polling IP and NetBIOS IP multi protocol router Advanced Routing and Forwarding Separate processing of 8 contexts due to virtualization of the routers Mapping to VLANs and complete independent management and configuration of IP networks in the device i e individual settings for DHCP DNS
8. WEP152 user authentication 802 1x EAP RADIUS server Integrated RADIUS server for MAC address list management EAP server Integrated EAP server for authentication of 802 1x clients via EAP TLS EAP TTLS PEAP MSCHAP or MSCHAPv2 Quality of Service Prioritization according to Wireless Multimedia Extensions WME subset of IEEE 802 11 Bandwidth limitation Each WLAN client MAC address can be assigned maximum transmit and receive rates and to an individual VLAN ID Background scanning Detection of rogue AP s and the channel information for all WLAN channels during normal AP operation The Background Scan Time Interval defines the time slots in which an AP or Router searches for a foreign WLAN network in its vicinity The time interval can be specified in either milliseconds seconds minutes hours or days Client detection Rogue WLAN client detection based on probe requests 802 1x supplicant Authentication of an access point in WLAN client mode at another access point via 802 1X EAP TLS EAP TTLS and PEAP Note MIMO The effective distance and transmission rate that can be achieved are depending of the site RF conditions 802 11n Draft 2 0 Features MIMO technology is a technique which uses multiple transmitters to deliver multiple data streams via different spatial channels LANCOM uses a 3 x 3 MIMO Configuration where 2 data streams are spread over 3 transmitters Depending on th
9. d via HTTP HTTPS or TFTP A remote configuration for devices behind der LANCOM can be accomplished after authentication via tunneling of arbitrary TCP based protocols e g for HTTP S remote maintenance of VoIP phones or printers of the LAN Security Access rights read Write over WAN or W LAN can be set up separately Telnet SSL SSH SNMP HTTPS HTTP access control list Scripting Scripting function for batch programming of all command line parameters and for transferring partial configurations irrespective of software versions and device types incl test mode for parameter changes SNMP SNMP management via SNMP V2 private MIB exportable by WEBconfig MIB II Timed control Scheduled control of parameters and actions with CRON service LANCOM L 305agn Wireless Management Scope of features as of LCOS version 7 5 TFTP TFTP client and server with variable file names name MAC IP address serial number Diagnosis Extensive LOG and TRACE options PING and TRACEROUTE for checking connections LANmonitor status display internal logging buffer for SYSLOG and firewall events LANCOM WLAN Controller Statistics Supported by all LANCOM WLAN Controller separate optional hardware equipment for installation optimization operating and monitoring of WLAN networks Hardware Power supply Statistics Extensive Ethernet IP and DNS statistics SYSLOG error counter Accounting Connection t
10. e existing RF conditions the throughput is doubled with MIMO technology LANCOM L 305agn Wireless 802 11n Draft 2 0 Features Scope of features as of LCOS version 7 5 40 MHz Channels Two adjacent 20 MHz channels are combined to create a single 40 MHz channel Depending the existing RF Conditions channel bonding doubles the throughput MAC Aggregation and Block Acknowledgement MAC Aggregation increase the 802 11 MAC efficiency by combining MAC data frames and sending it out with a single header The receiver acknowledges the combined MAC frame with a Block Acknowledgement Depending on existing RF conditions this technique improves throughput by upto 20 Short Guard Interval WLAN operating modes WLAN access point The guard interval is the time between OFDM symbols in the air 802 11n gives the option for a shorter 400 nsec guard interval compared to the legacy 800 nsec guard interval Under ideal RF conditions this increases the throughput by upto 10 Infrastructure mode autonomous operation or managed by LANCOM WLAN Controller WLAN bridge Point to multipoint connection of up to 7 Ethernet LANs mixed operation optional broken link detection blind mode up to 32 VLANs simultaneously for WLAN connections When configuring Pt to Pt links pre configured names can be used as an alternative to MAC Adresses for creating a link WLAN router Use of the LAN connector for simultaneous DSL over
11. eless UK 61523 www lancom eu LANCOM Systems GmbH Adenauerstr 20 B2 52146 Wuerselen Deutschland E Mail info lancom eu Internet www lancom eu LANCOM Systems LANCOM LANCOM Systems and LCOS are registered trademarks All other names or descriptions used may be trademarks or registered trademarks of their owners Subject to change without notice No liability for technical errors and or omissions 07 08
12. ernet Service LANCOM Service Option 24h advance replacement within Germany 4 year warranty not for PoE Power Injector item no 61401 Public Spot LANCOM Public Spot Option authentication and accounting software for hotspots Expanded in LCOS 7 5x to include the Voucher Wizard The Wizard allows easy set up of guest accounts and the vouchers can be printed over any standard Printer on the network Works without external RADIUS and Accounting Servers Item no 60642 LANCOM L 305agn Wireless Scope of features as of LCOS version 7 5 Accessories LANCOM WLC 4006 LANCOM WLAN Controller for central management of 6 or 12 LANCOM access points and WLAN routers item no 61367 LANCOM WLC 4006 UK LANCOM WLAN Controller for central management of 6 or 12 LANCOM access points and WLAN routers item no 61368 for UK LANCOM WLC 4025 LANCOM WLAN Controller for central management of 25 50 or 100 LANCOM access points and WLAN routers item no 61550 LANCOM WLC 4025 UK LANCOM WLAN Controller for central management of 25 50 or 100 LANCOM access points and WLAN routers item no 61551 for UK Documentation LANCOM LCOS Reference Manual DE item no 61700 Power over Ethernet Injector LANCOM PoE Power Injector item no 61502 Power over Ethernet Switch LANCOM L 305agn Wireless LANCOM ES 1108P 8 port switch with 4 PoE ports item no 61450 61522 LANCOM L 305agn Wir
13. idth reservation Dynamic reservation of minimum and maximum bandwidths totally or connection bases separate settings for send and receive directions DiffServ TOS Priority queuing of packets based on DiffServ TOS fields Packet size control Automatic packet size control by fragmentation or Path Maximum Transmission Unit PMTU adjustment Layer 2 Layer 3 tagging Security Intrusion Prevention Automatic or fixed translation of layer 2 priority information 802 11p marked Ethernet frames to layer 3 DiffServ attributes in routing mode Translation from layer 3 to layer 2 with automatic recognition of 802 1p support in the destination device Monitoring and blocking of login attempts and port scans IP spoofing Source IP address check on all interfaces only IP addresses belonging to the defined IP networks are allowed Access control lists Filtering of IP or MAC addresses and preset protocols for configuration access Denial of Service protection Protection from fragmentation errors and SYN flooding General Detailed settings for handling reassembly PING stealth mode and AUTH port URL blocker Filtering of unwanted URLs based on DNS hitlists and wildcard filters Password protection Password protected configuration access can be set for each interface Alerts Alerts via e mail SNMP Traps and SYSLOG Authentication mechanisms EAP TLS EAP TTLS PEAP MSCHAP MXCHAPv2 as EA
14. ime online time transfer volumes per station Snapshot function for regular read out of values at the end of a billing period Export Accounting information exportable via LANmonitor and SYSLOG 12 V DC external power adapter 230 V Power supply Via Power over Ethernet compliant with IEEE 802 3af Environment Temperature range 0 35 C humidity 0 95 non condensing Housing Robust synthetic housing rear connectors ready for wall mounting Kensington lock 210 x 45 x 140 mm W x H x D Power consumption max Declarations of conformity approx 9 5 Watts CE EN 301 489 1 EN 301 489 17 EN 60950 2 4 GHz WLAN ETS 300 328 5 GHz WLAN EN 301 893 version 1 3 1 incl DFS 2 Medical Medical conformity with EN 60601 1 2 Notifications Package content Certifications notified in Germany Belgium Netherlands Luxembourg Austria Switzerland UK Italy Spain France Portugal Czech Republic Denmark Malta Manual Printed User Manual DE EN and Quick Installation Guide DE EN FR ES IT PT NL CD CD with firmware management software LANconfig LANmonitor WLANmonitor and documentation Cable Serial configuration cable 1 5m Cable 1 Ethernet cable 3m Power supply unit Warranty 12 V DC external power adapter 230 V 3 years Support via Hotline and Internet KnowledgeBase Software updates Regular free updates LCOS operating system and management tools via Int
15. sents a greater than five fold increase over the performance of 802 11a g networks Better and Reliable Coverage MIMO technology uses multiple antennas at both the transmitter and receiver to transmit multiple spatial streams The multiple transmit streams which take different routes in reflecting environments are combined at the receiver using MIMO techniques The end result is a two fold increase in throughput and improved wireless coverage due to lesser deadspots More Security Right since its inception LANCOM has implemented the highest of security standards A comprehensive range of security technologies is supported in wireless LAN including IEEE 802 111 802 1x WPA WPA2 WEP64 128 152 access control lists or LEPS LANCOM Enhanced Passphrase Security which enables the configuration of an optimized solution whatever the individual requirements For example Multi SSID allows the definition of up to 8 user groups each with its own level of security More Management LANCOM s WLAN management tools offer real benefits to network administrators for the installation control and monitoring of access points LANCOM WLAN Controller has built in support for the the L 305 access point LANCOM s Smart Controller architecture is specifically designed to support high bandwidth applications by providing flexible data plane switching options As a result higher bandwidth applications can directly offloaded at the access point and reduces the o
16. verall cost involved in expensive network upgrades required in centralized architectures WLANmonitor visualizes the devices connected to WLAN irrespective of physical location and facilitates the central surveillance of the entire wireless network More Reliability for the Future From the very start LANCOM products are designed for a product life of several years They are equipped with hardware dimensioned for the future Even reaching back to older product generations updates to the LANCOM Operating System LCOS are available several times a year free of charge and offering major features LANCOM offers unparalelled protection of your investment LANCOM L 305agn Wireless Scope of features as of LCOS version 7 5 WLAN Frequency band 2 4 GHz or 5 GHz EU compliance 2400 2483 5 MHz ISM or 5150 5750 MHz or 5725 5825 MHz UK only Integrated Antenna Gain 3 dBi in 2 4 GHz 4 5 dBi in 5 GHz Data rates 802 11b g 54 Mbps to IEEE 802 11 fallback to 48 36 24 18 12 9 6 Mbps Automatic Rate Selection compatible to IEEE 802 11b 11 5 5 2 1 Mbps Automatic Rate Selection 802 11 b g compatibility mode or pure g or pure b Data rates 802 11a 54 Mbps fallback to 48 36 24 18 12 9 6 Mbps Automatic Rate Selection fully compatible with TPC adjustable power output and DFS 2 automatic channel selection radar detection according to ETSI regulations Data rates 802 11n 300 Mbps according to IE
Download Pdf Manuals
Related Search