LG L1954SM-PF MT19
Contents
1. The following section is an outline of the available adjustments and selections you can make using the OSD NOTE a Allow the display to stabilize for at least 30 minutes before making image adjustments To make adjustments in the On Screen Display follow these steps MENU AUTO SET MENU q Press the MENU Button then the main menu of the OSD appears To access a control use the or Buttons When the icon you want becomes highlighted press the AUTO SET Button 8 Use the Buttons to adjust the image to the desired level Use the AUTO SET Button to select other sub menu items Push the MENU Button once to return to the main menu to select another function Push the MENU Button twice to exit from the OSD On Screen Display OSD Selection and Adjustment The following table indicates all the On Screen Display control adjustment and setting menus PICTURE pue Se BRIGHTNESS ey To adjust the brightness contrast CONTRAST oust fe and gamma of the screen GAM MA e le To select or customize f ENGINE USER o desired image settings CCE COLOR eji customize the color of the screen HORIZONTAL a To adjust the position of the POSITION venno o eeen CLOCK TRACKING PHASE o To improve the clarity and eo stability of the screen SHARPNESS e moues fe SETUP romae e POSITION VERTICAL environment ee POWER INDICATOR FACTORY RESET Adjustable A A2. User s Guide a TT L1754SM L1954SM Make sure to read the Important Precautions before using the product Keep the User s Guide CD in an accessible place for future reference See the label attached on the product and give the information to your dealer when you ask for service Important Precautions This unit has been engineered and manufactured to ensure your personal safety however improper use may result in potential electrical shock or fire hazards In order to allow the proper operation of all safeguards incorporated in this display observe the following basic rules for its installation use and servicing On Safety Use only the power cord supplied with the unit In case you use another power cord make sure that it is certified by the applicable national standards if not being provided by the supplier If the power cable is faulty in any way please contact the manufacturer or the nearest authorized repair service provider for a replacement The power supply cord is used as the main disconnection device Ensure that the socket outlet is easily accessible after installation Operate the display only from a power source indicated in the specifications of this manual or listed on the display If you are not sure what type of power supply you have in your home consult with your dealer Overloaded AC outlets and extension cords are dangerous So are frayed power cords and broken plugs They may result in a shock or
3. and use a screwdriver to fasten if necessary e Make sure the video card is properly inserted in the slot e Set the color setting higher than 24 bits true color at Control Panel Settings The screen blinks e Check if the screen is set to interlace mode and if yes change it to the recommend resolution Troubleshooting Have you installed the display driver Have you installed the e Be sure to install the display driver from the display display driver driver CD or diskette that comes with your display Or you can also download the driver from our web site http Avww ige com Do you see an e Make sure to check if the video card supports Unrecognized monitor Plug amp Play function Plug amp Play VESA DDC monitor found message Specifications 17 inch Display 17 inches 43 2 cm Flat Panel Active matrix TFT LCD Anti Glare coating 17 inches viewable 0 264 mm pixel pitch Sync Input Horizontal Freq 30 83 kHz Automatic Vertical Freq 56 75 Hz Automatic Input Form Separate TTL SOG Sync On Green Video Input Signal Input 15 pin D Sub Connector Input Form RGB Analog 0 7 Vp p 75 ohm Resolution Max VESA 1280 x 1024 75 Hz Recommend VESA 1280 x 1024 60 Hz Plug amp Play DDC 2B Power On Mode 35 W Typ Consumption Sleep Mode lt 1W Off Mode lt 1W amp Weight Width 37 13 cm 14 62 inches 37 13 cm 14 62 inches Height 41 43 cm 16 31 inches 34 10 cm 13 43 in
4. ater such as near a bathtub washbow l kitchen sink laundry tub ina wet basement or near a Swimming pool Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation If these openings are blocked built up heat can cause failures which may result in a fire hazard Therefore NEVER Block the bottom ventilation slots by placing the display on a bed sofa rug etc a Place the display in a built in enclosure unless proper ventilation is provided a Cover the openings with cloth or other material a Place the display near or over a radiator or heat source a Main power breaker is the power cord and this breaking device must be located at a location where It Is easy to operate Do not rub or strike the Active Matrix LCD with anything hard as this may scratch mar or damage the Active Matrix LCD permanently Do not press the LCD screen with your finger for a long time as this may cause some afterimages some dot defects may appear as Red Green or Blue spots on the screen However this will have no impact or effect on the display performance If possible use the recommended resolution to obtain the best image quality for your LCD display If used under any mode except the recommended resolution some scaled or processed images may appear on the screen However this is characteristic of the tixed resolution LCD panel On Cleaning Unplug the display before cleaning th
5. ches Depth 20 40 cm 8 03 inches 7 89cm 3 11 inches Net 3 35 kg 7 39 Ibs Tilt Range Tilt 5 20 Power Input AC 100 240V 50 60Hz 0 8A Environmental Operating Conditions Conditions Temperature 10 C to 35 C Humidity 10 to 80 non Condensing Storage Conditions Temperature 20 C to 60 C Humidity 5 to 90 non Condensing Stand Base Attached _ Detached O Power cord Wall outlet type or PC outlet type NOTE Information in this document is subject to change without notice Specifications 19 inch Display 19 inches 48 19 cm Flat Panel Active matrix TFT LCD Anti Glare coating 19 inches viewable 0 294 mm pixel pitch Sync Input Horizontal Freq 30 83 kHz Automatic Vertical Freq 56 75 Hz Automatic Input Form Separate TTL SOG Sync On Green Video Input Signal Input 15 pin D Sub Connector Input Form RGB Analog 0 7 Vp p 75 ohm Resolution Max VESA 1280 x 1024 75 Hz Recommend VESA 1280 x 1024 60 Hz Plug amp Play DDC 2B Power On Mode 37 W Typ Consumption Sleep Mode lt 1W Off Mode lt 1W Dimensions With Stand Without Stand amp Weight Width 40 79 cm 16 06 inches 40 79 cm 16 06 inches Height 42 57 cm 16 76 inches 37 22 cm 14 65 inches Depth 23 00 cm 9 06 inches 7 59cm 2 99 inches Net 3 85 kg 8 49 lbs Tilt Range Tilt 5 20 Power Input AC 100 240V 50 60Hz 0 8A Environmental Operating Conditions Conditions Temperature 10 C to 35 C Humidity 10 to 80 non Condensi
6. e restore the factory default settings If necessary perform the white balance function again This function will be enabled only when the input signal is an analog signal Troubleshooting Check the following before calling for service No image appears Is the power cord of the Check and see if the power cord is connected display connected properly to the power outlet Is the power indicator Press the Power button light on Is the power on and the Adjust the brightness and the contrast power indicator blue or green Is the power indicator If the display is in power saving mode try moving amber the mouse or pressing any key on the keyboard to bring up the screen e Try to turn on the PC Do you see an OUT OF This message appears when the signal from the RANGE message on PC video card is out of horizontal or vertical the screen frequency range of the display See the Specifications section of this manual and configure your display again Do you see a CHECK This message appears when the signal cable SIGNAL CABLE between your PC and your display is not message on the connected Check the signal cable and try again screen Do you see a OSD LOCKED message on the screen Do you see OSD e You can secure the current control settings LOCKED when you so that they cannot be inadvertently changed push MENU button You can unlock the OSD controls at any time by push
7. e face of the display screen Use a slightly damp not wet cloth Do not use an aerosol directly on the display screen because over spraying may cause electrical shock On Repacking a Do not throw away the carton and packing materials They make an ideal container in which to transport the unit When shipping the unit to another location repack it in its original material On Disposal he fluorescent lamp used in this product contains a small amount of mercury Do not dispose of this product with general household waste Disposal of this product must be carried out in accordance to the regulations of your local authority Connecting the Display Before setting up the monitor ensure that the power to the monitor the computer system and other attached devices is turned off Connecting the stand 1 Place the monitor with its front facing downward on a soft cloth 2 Assemble the Stand Body into the product in the correct direction as shown in the picture Stand Body Hinge Body 3 Assemble the Stand Base Front Rear into the Stand Body in the correct direction Stand Base Stand Body 4 Insert the Cable Deco Cover in the Stand Body in the correct direction Stand Base Cable Deco Cover Cable Deco Cover Stand Body Wa 5 Once assembled take the monitor up carefully and face the front side Important This illustration depicts the general model of connection Your monitor may differ from the items show
8. fire hazard Call your service technician for replacement Do not Open the Display a here are no user serviceable components inside a There are Dangerous High Voltages inside even when the power is OFF a Contact your dealer if the display is not operating properly To Avoid Personal Injury Do not place the display on a sloping shelf unless properly secured a Use only a stand recommended by the manufacturer Do not drop an object on or apply impact to the product Do not throw any toys or objects on the product screen It can cause injury to human problem to product and damage the display To Prevent Fire or Hazards a Always turn the display OFF if you leave the room for more than a short period of time Never leave the display ON when leaving the house a Keep children from dropping or pushing objects into the display s cabinet openings Some internal parts carry hazardous voltages Do not add accessories that have not been designed for this display a When the display is to be left unattended for an extended period of time unplug it from the wall outlet a In the presence of thunder and lightning never touch the power cord and signal cable because It can be very dangerous It can cause electric shock Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord and do not place the display where the power cord is subject to damage Do not use this display near w
9. ing the MENU button for several seconds the message OSD UNLOCKED will appear Troubleshooting Display image is incorrect Display Position is e Press the AUTO SET button to automatically incorrect adjust your display image to the ideal setting If the results are unsatisfactory adjust the image position using the H position and V position icon in the on screen display e Check Control Panel gt Display gt Settings and see if the frequency or the resolution were changed If yes readjust the video card to the recommend resolution On the screen e Press the AUTO SET button to automatically background vertical adjust your display image to the ideal setting bars or stripes are If the results are unsatisfactory decrease the visible vertical bars or stripes using the CLOCK icon in the on screen display Any horizontal noise Press the AUTO SET button to automatically appearing in any adjust your display image to the ideal setting image or characters If the results are unsatisfactory decrease the are not clearly horizontal bars using the PHASE icon in the on portrayed screen display e Check Control Panel gt Display gt Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting Set the color setting higher than 24 bits true color The screen color is e Check if the signal cable is properly connected mono or abnormal
10. justs screen brightness ACE Adaptive Clarity Enhancer Selects the clarity mode RCM Real Color Management Selects the color mode s MENU Exit ESSE Not applied Decrease CE Green enhance Increase SET Select another sub menu Seer Flesh tone EE E Color Enhance On Screen Display OSD Selection and Adjustment Main menu Sub menu Z f ENGINE engine TEXT MOVIE PRESET Lal 6500K Description This feature lets you easily select the best desired image condition optimized to the environment ambient illumination image types etc TEXT For text images Word processing etc MOVIE For animation images in videos or movies PRESET e SRGB Set the screen color to fit the SRGB standard color specification e 6500K Slightly reddish white e 9300K Slightly bluish white RED Set your own red color levels le GREEN Set your own green color levels a MENU Exit Decrease BLUE Set your own blue color levels Increase SET Select another sub menu On Screen Display OSD Selection and Adjustment Main menu Sub menu Description CS POSITION HORIZONTAL To move image left and right VERTICAL To move image up and down MENU Exit Decrease Increase SET Select another sub menu M TRACKING CLOCK To minimize any vertical bars or stripes visible on the screen background The horizontal screen size will als
11. n in the picture Do not carry the product upside down holding only the stand base The product may fall and get damaged or injure your foot Connecting the Display Disassembling the stand 1 Puta cushion or soft cloth on a flat 2 Place the monitor face down on surface the cushion or soft cloth Connecting the Display Before setting up the monitor ensure that the power to the monitor the computer system and other attached devices is turned off Positioning your display 1 Adjust the position of the panel in various ways for maximum comfort a Tilt Range 5 20 Ergonomic It is recommended that in order to maintain an ergonomic and comfortable viewing position the forward tilt angle of the monitor should not exceed 5 degrees Connecting the Display Using the Computer 1 Make sure to turn off the computer and product Connect the cable as below sketch map form to A Connect Audio Cable Connect Dsub Cable PC Connect Dsub Cable Mac Power Cord Analogsignal Audio signal AC IN D SUB AUDIOIN Q 0 Oo o Headphone Earphone Input Automatically mutes the speaker volume when the headphones are plugged in Wall outlet type I lt a tt PC outlet type PC A Fix the power cord amp signal cable Connects to the LINE OUT jack of the PC sound card as shown in the picture uc i WdE 3 gt Mac adapter For Apple Macintosh u
12. nalog Input NOTE a he order of icons may differ depending on the model A10 A15 On Screen Display OSD Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system Listed below are the icons icon names and icon descriptions of the all items shown on the Menu Press the MENU Button then the main menu of the OSD appears Menu Name 449 a GE engine Ga CONTRAST COS ae coe Sub menus or GAMMA y coo __ 0 MENU gt SETL Button Tip MENU 6 Exit Adjust Decrease Increase s SET Enter Select another sub menu NOTE s OSD On Screen Display menu languages on the monitor may differ from the manual On Screen Display OSD Selection and Adjustment Main menu Sub menu Description PICTURE BRIGHTNESS To adjust the brightness of the screen CONTRAST To adjust the contrast of the screen GAMMA Set your own gamma value 50 0 50 On the monitor high gamma values display whitish images and low gamma values display high contrast images MENU Exit a Decrease Increase SET Select another sub menu Z f ENGINE engine NORMAL This is under normal operating conditions i SS amp m A O A m H USER User You can manually adjust brightness ACE or RCM BRIGHTNESS You can save or restore the adjusted value even ase when using a different environment Brightness Ad
13. ng Storage Conditions Temperature 20 C to 60 C Humidity 5 to 90 non Condensing Stand Base Attached Detached O Power cord Wall outlet type or PC outlet type NOTE a Information in this document is subject to change without notice Preset Modes Resolution Display Modes Resolution Horizontal Freq kHz Vertical Freq Hz 1 VGA 640 x 350 31 469 70 2 VGA 720 x 400 31 468 70 3 VGA 640 x 480 31 469 60 4 VESA 640 x 480 37 500 75 5 VESA 800x600 37 879 60 6 VESA 800 x 600 46 875 75 7 MAC 832 x 624 49 725 75 8 VESA 1024 x 768 48 363 60 9 VESA 1024 x 768 60 023 75 10 MAC 1152 x 870 68 681 75 11 VESA 1152 x 900 61 805 65 12 VESA 1280 x 1024 63 981 60 13 VESA 1280 x 1024 79 976 75 Indicator On Mode blue Sleep Mode amber Off Mode Off Recommend Mode Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate or the interchange device 1 Place the monitor with its front facing downward on a soft cloth ENN 411 3 Install the Wall mount plate Wall mount plate Separate purchase This is stand type or wall mount type and is connectable with Wall mount plate Please refer to the installation guide for more details which is provided when Wall mount plate is purchased Kensington Security Slot Connected to a locking cable that can be purchased separately at most computer stores Digitally yours saan La
14. nged Press and hold the MENU button for several seconds OSD LOCKED The message OSD LOCKED should appear You can unlock the OSD controls at any time by pushing the MENU button for several seconds The message OSD UNLOCKED should appear Use these buttons to decrease or increase the speaker Buttons voline Use these buttons to select or adjust functions in the On Screen Display Control Panel Functions AUTO SET Button PROCESSING AUTO IMAGE ADJUSTMENT 5 Power Button O Power Indicator Use this button to enter a selection in the On Screen Display AUTO IMAGE ADJUSTMENT When adjusting your display settings always press the AUTO SET button before entering the On Screen Display OSD This will automatically adjust your display image to the ideal settings for the current screen resolution size display mode The best display mode is 17 inch monitor 1280 x 1024 19 inch monitor 1280 x 1024 Use this button to turn the display on or off This Indicator lights up blue when the display operates normally On Mode If the display is in Sleep Mode Energy Saving this indicator color changes to amber On Screen Display OSD Control Adjustment Screen Adjustment Making adjustments to the image size position and operating parameters of the display is quick and easy with the On Screen Display Control system A short example is given below to familiarize you with the use of the controls
15. o change 1H 50 PNARENESS PHASE To adjust the focus of the display This item allows you to remove any horizontal noise and clear or sharpen a MENU Exit the image of characters Decrease Increase SHARPNESS To adjust the clearness of the screen SET Select another sub menu On Screen Display OSD Selection and Adjustment Main menu Sub menu Description EJ SETUP LANGUAGE To choose the language in which the control names are displayed OSD To adjust position of the OSD window POSITION on the screen HORIZONTAL Omm 1H 50 PS0 p s WHITE If the output of the video card is different BALANCE the required specifications the color level may deteriorate due to video signal distortion Using this function the signal level is adjusted to fit into the standard output level of the video card POWER INDICATOR in order to provide the optimal image FACTORY RESET Activate this function when white and black colors are present in the screen POWER Use this function to set the power INDICATOR _ indicator on the front side of the monitor MENU Exit to ON or OFF Adjust If you set OFF it will go off Adjust SET Select another sub menu If you set ON at any time the power indicator will automatically be turned on FACTORY Restore all factory default settings except RESET LANGUAGE Press the button to reset immediately lf this does not improve the screen imag
16. se a separate plug adapter is needed to change the 15 pin high density 3 row D sub VGA connector on the supplied cable to a 15 pin 2 row connector 2 Insert the Cable Deco Cover in the Stand Body in the correct direction 3 Press l button on the front switch panel to turn the power on When monitor power is turned on the Self Image Setting PROCESSING SELF Function is executed automatically IMAGE SETTING Only Analog Mode NOTE Self Image Setting Function This function provides the user with optimal display settings When the user connects the monitor for the first time this function automatically adjusts the display to optimal settings for individual input signals If you want to adjust the monitor while in use or wish to manually run this function once again push the AUTO SET button on the front panel of the monitor Otherwise you may execute the Factory reset option on the OSD adjustment menu However be aware that this option initializes all the menu items except Language Control Panel Functions Front Panel Controls VOL AUTO SET MUTE Button Use this button to mute the speaker volume Use this button to save the adjusted setting in the On Screen Display 2 MENU Button Use this button to enter or exit the On Screen Display OSD LOCKED UNLOCKED This function allows you to lock the current control settings so that they cannot be inadvertently cha
Download Pdf Manuals
Related Search