Nokia HH-12 Easy Mount Holder
Contents
1. Attach to a windshield ENGLISH windshield especially if the ambient temperature changes a lot Never leave the mounting device inside the vehicle in direct sunlight or in excessive heat The mounting device and suction cup may be damaged and adhesion may be impaired if the inside temperature exceeds 70 C 160 F Locate a safe mounting surface on the windshield and clean the surface thoroughly with a glass cleaner and a clean towel If the ambient temperature is below 15 C 60 F carefully warm the surface and the suction cup with a hair dryer to ensure a firm grip on the windshield Ensure that you do not heat the windshield excessively to avoid damage to it Press the suction cup at the bottom of the mounting device firmly on the windshield see step 1 at the start of this guide and carefully push the locking lever inside the mounting device 2 towards the suction cup to create a vacuum between the suction cup and the windshield Check that he suction cup is firmly attached To detach the mounting device from he windshield carefully push the Do not adjust the mounting device while driving To set the top of the mounting device o the desired position loosen the wo screws in the middle of the mounting device turn the top to the desired position and tighten the ENGLISH locking lever toward the top of the mounting device 3 and pull the strap located on the edge of the suction cup 42. Nokia Holder Easy Mount HH 12 9249385 2 2006 Nokia All rights reserved Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation Introduction This mounting device allows you to attach your compatible Nokia mobile holder to the windshield of your vehicle General safety instructions ENGLISH To use the mounting device with your compatible mobile holder attach the mounting device to the windshield adjust the mounting device into the desired position and attach your mobile holder to the mounting device Obey all local laws Always keep your hands free to operate the vehicle while driving Your first consideration while driving should be road safety Only operate the mounting device or mobile holder if it is safe to do so under all driving conditions When you install the mounting device or mobile holder ensure that they do not interfere with or hinder the steering or braking systems or other systems used in the operation of the vehicle for example airbags or disturb your field of vision while driving Check that the deployment of the airbag is not blocked or impaired in any way Ensure that the mounting device or mobile holder is not installed where you might come in contact with it in the event of an accident or collision Periodically check that the suction cup at the bottom of the mounting device is firmly attached to the
3. Set to the desired position screws 5 Ensure that the top of the device is firmly locked into place To set the mounting plate at the top of the mounting device to the desired position loosen the screw below the plate turn the plate to the desired position and tighten the screw 6 Mount the mobile holder To attach a compatible Nokia mobile holder to the mounting plate use the screw supplied with the holder For example to use the mobile holder CR 39 remove the protection plate with the Nokia text from the holder attach the holder to the mounting plate with the supplied screw and replace the protection plate 7 Insert your phone into the holder and press the clamps at the sides of the holder until the phone is firmly in place To release the phone press the button below the left clamp The mobile holder CR 39 supports mobile devices with the following dimensions height 95 120 mm width 42 55 mm Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care The suggestions below will help you protect your warranty coverage Keep all accessories and enhancements out of the reach of small children Do not use or store the device in dusty dirty areas Its moving parts can be damaged ENGLISH thickness 13 26 mm weight 200 g at maximum When attaching a mobile holder ensure that the phone display is clearly visible for the
4. user For your safety install the holder in the upright position Do not drop knock or shake the device Rough handling can break fine mechanics e Do not use harsh chemicals cleaning solvents or strong detergents to clean the device Do not paint the device Paint can clog the moving parts and prevent proper operation If the product is not working properly take it to the nearest authorized service facility for service
Download Pdf Manuals
Related Search