Thecus USB portable harddisk USB powered
Contents
1. Thecus Y E S nano N1050 External Hard Disk Drive Enclosure amp Mobile Photo Bank Quick Installation Guide 1 Package Contents 6 User Manual pe 2 Hard Disk Installations amp Configurations Step 1 Remove screws amp Cover Step 2 Insert a 2 5 IDE HDD Step 3 Replace cover amp fasten and fasten with mounting the screws screws Connect the N1050 to a PC to format your HDD You need at least one FAT32 partition on your HDD in order to copy files from your digital cameras MP3 players or USB disks 4 Product Function Introduction 1 LEDs N1050 as external hard disk The copy procedure is finished if the light restores Stability and ready for next action 2 ERR Error LED Light on or flickering shows there are errors during transferring data and you need to check up 3 Copy OK Indicates the copy process has finished when the unit is in OTG mode 1 Power Copy Shows the power status on off or the battery status It is steady bright green if it is powered on either AA battery or bus power blinking light indicates the status of data transferring between different USB devices or data transferring between PC and 2 Button amp Switch S COPY OFF PC COPY 1 COPY button It is a copy stop key when the device is used as a photo bank press it to start copy process and the COPY LED will be on press it for a second time to stop copy process 2 Mode Switch OFF To turn the device of2. blink this indicates data transferring status Portable Hard Disk icon appears on My Computer of PC USB drive needs to be installed on Windows 98 system 3 Remove USB device from your PC before disconnection of the USB cable NOTE If the hard disk does not spin up after connecting the external hard disk to PC it is because the bus power is insufficient You need to plug in the USB DC power supply wire Notice If the device is used as Photo Bank at least one of the partitions should be FAT 32 Do not use other external power adapter than the original one included so as not to cause damage to your N1050 Do not cut off power or disconnect USB cable when the POWER COPY LED is blinking Use AA Ni Mh battery or alkaline battery and pay attention to the positive and negative polarity Certificates CE FCC C Tick
3. f PC The device is used as a external hard disk The device will use USB bus as power supply COPY The device is used as a OTG device The device will use battery pack or external power supply as power source 3 USB port Connection to other USB devices or PC 4 Power socket DC 5V power supply or AAA battery 1 5 Product Usage 1 Using N1050 as Photo Bank 1 Connect to Digital Cameras Card Readers Flash Memory Disks MP3 players via USB cable 2 Plug inthe battery case or external power supply turn on the Power key and switch to COPY position After the Power Copy LED is on the N1050 is ready for action and press COPY key to start copy and meanwhile the light is flickering Photo Bank will create a subdirectory named DSKXXXXX XXXXX are each different digits and it will retain the original directory structure After the COPY LED stops blinking the copy procedure is finished and ready for next action you may also disconnect power and USB cable 3 When the COPY LED stops blinking and COPY OK LED is on it means the copy procedure is completed If the ERR LED is on it means the copy process might not have finished 4 When copying is in progress COPY LED blinking user can press COPY button to stop the process 2 Using N1050 as a external hard disk 1 Turn the switch to PC 2 Connect the N1050 to PC via USB cable POWER COPY LED will light and the hard disk is ready for use If the POWER COPY LED starts to
Download Pdf Manuals
Related Search