Infocus Manual Pull Down Screen 100" Diagonal,4x3 Video Format, White
Contents
1. 49444 97193 ModB ClassRite InF 3 18 05 8 34 AM ae 1 InFocus EASIER OPERATION LONGER LIFE n CSUS e Exclusive Camlok Roller System e Attractively styled e Easily installed e Economically priced e Completely self storing OPERATING INSTRUCTIONS FOR MANUAL WALL CEILING SCREENS SC MAN WHT 84 SC MAN WHT 100 SC MAN WHT 120 SC MAN GRY 92H SC MAN GRY 106H InFocus Corporation 27700 SW Parkway Ave Wilsonville OR 97070 800 294 6400 97193 3 05 www I nFocus com 4 49444 97193 ModB ClassRite InF 3 18 05 8 34 AM ae 2 YOU HAVE MADE A WISE SELECTION in choosing an InFocus projection screen designed and engineered to produce the sharpest most pleasing pictures with maximum convenience PROTECT YOUR SCREEN by keeping it rolled in its protective case when not in use Always examine both front and back of surface before re rolling into case to make certain screen is free of dust dirt or other foreign matter Use a very soft duster brush gently to remove foreign particles INSTALLATION Care in mounting and care in correct operation will mean a long and satisfactory life for your InFocus wall ceiling screen Locate the screen where the audience can best see it and where other furnishings in the room permit Mount the screen so that bottom of picture surface when fully extended will be above heads of viewers BUILT IN HANGERS InFocus wall ceiling screens may be mounted on wall map rails suspended from ceiling2. or extension brackets Wall screens must be mounted level and with the case back parallel to the wall FOR WALL MOUNTING Use the keyhole slot at the back of the hanging FOR JE Fiera bracket for flush wall Y suspension Position screws or other a fasteners into wall and Pedal hang screen by using slots FOR MAP RAIL MOUNTING Use keyhole slots in flat brackets Do not use D rings FOR CEILING FOR CEILING SUSPENSION If the screen is to be ceiling mounted two screw hooks placed in a beam or other solid surface will do the job NOTE Whichever method is used the screen should be free to swing forward and back and not be anchored rigidly Mount the screen so that bottom of picture surface when fully extended will be above heads of viewers OPERATING INSTRUCTIONS TO LOWER PICTURE SURFACE Pull screen down all the way HESITATE then allow screen to retract VERY SLOWLY until it locks in place TO RAISE PICTURE SURFACE Pull down on the pull bail then raise quickly as a window shade Keep control of the picture surface Do not allow it to roll uncontrolled into the case or damage is sure to result ee
Download Pdf Manuals
Related Search