Home

Avanti WIMD332PC-IS ice cube maker

image

Contents

1. IT ICE WATER DISPENSER DISPENSADOR DE AGUA Y HIELO INSTRUCTION MANUAL MANUAL DE INSTRUCCIONES Model Number No de Modelo WIMD332PC IS BEFORE USE PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS La secci n en espa ol empieza en la p gina 15 Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice AVANTI PRODUCTS LLC P O Box 520604 Miami Florida 33152 www avantiproducts com TABLE OF CONTENTS Appliance Safety 3 Important Safeguides 4 Help Us Help You 5 Parts and Features 6 Electrical Connection Extension Cord Surge Protector 7 Important Safety Instructions 8 Installation Instructions 8 Before Using Your Appliance 8 Installation of Your Appliance 8 Operating Your Appliance 9 Control Panel Description 9 Operating instructions 10 11 Care and Maintenance 11 Cleaning Your Appliance 11 Space Requirements 11 Power Failure 11 Troubleshooting Guide 12 Service for Your Appliance 13 Wiring Diagram Your Avanti Products Warranty 14 Instrucciones en Espa ol 15 20 Registration Information and Registration Card 23 APPLIANCE SAFETY YOUR SAFETY AND THE SAFETY OF OTHERS ARE VERY IMPORTANT We have provided many important safety messages in this manual for your appliance Always read and obey all safety messages This is the safety al
2. Dispense approximately 1 cup of water by pressing the button marked WATER on the control panel to clear out the water dispenser system Open the drain plug located at the rear of the unit to drain out any remaining water make sure you have a bucket or other object to collect the water to avoid spillage Return the drain plug to its original position Open the reservoir cover door and fill the reservoir to the max position Close the reservoir cover door and press the ON OFF to turn the unit off Warning Never add water past the line marked MAX this will cause water to flow out of the reservoir and soak electronic components inside the unit Warning Never fill the dispenser with any liquid other than water This will cause damage to the dispensing systems and void the warranty add water by manual Starting the Ice Making Cycle Turn the unit ON by pressing the Power ON OFF button Select desired ice cube size by pressing the SELECT BUTTON S or L The ice maker will automatically check the water level in the reservoir periodically The ice maker will detect any shortage of water and will stop the ice making cycle the ADD WATER indicator will be lit Turn the unit OFF by pressing the Power ON OFF button and fill the reservoir with water Press the Power ON OFF button again to restart the ice making cycle after the ADD WATER indicator goes out the ice maker will begin It s normal operation cycle
3. Installation of Your Appliance e Place your ice water dispenser on counter that is strong enough to support the unit when it is fully loaded with water e Allow 5 inches of space between the back and sides of the unit which allows the proper air circulation to cool the compressor and condenser e Locate the unit away from direct sunlight and sources of heat stove heater radiator etc Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption Extreme cold ambient temperatures may also cause the ice water dispenser not to perform properly e Avoid locating the unit in moist areas e Plug the unit into an exclusive properly installed grounded wall outlet Do not under any circumstances cut or remove the third ground prong from the power cord Any questions concerning power and or grounding should be directed toward a certified electrician or an authorized Avanti Products service center IMPORTANT Do not install the Ice maker near an oven radiator or other heat source gt OPERATING YOUR ICE MAKER gt Control Panel Description C_D ON OFF pa LARGE WATER Display Meanings and How to operate ADD WATER Water level in reservoir is not sufficient to begin the ice making cycle Using the water cup included with the unit fill the water reservoir up to the line marked MAX ICE MAKING CYCLE STATUS When the fan is rotating this
4. If you need service We re proud of our service and want you to be pleased If for some reason you are not happy with the service you receive here are some steps to follow for further assistance First contact the people who serviced your ice maker Explain why you are not pleased In most cases this will solve the problem Next if you are still not pleased write all the Write down the model and serial numbers You ll find them on a plate located on the rear wall of the ice maker Please write these numbers here Date of purchase Model number Serial number Use these numbers in any correspondence or service calls concerning your ice maker If you received a damaged ice maker immediately contact the dealer or builder that sold you the ice maker Save time and money Before you call for service check the troubleshooting guide It lists causes of minor operating problems that you can correct yourself details including your telephone number and send it to Customer Service Avanti Products 10880 NW 30 Street Miami Fl 33172 USA PARTS AND FEATURES ae dl dl N 14 15 1 ICE BIN ACCESS LID 2 FRONT COVER PANEL 3 LCD DISPLAY 4 CONTROL PANEL 5 ICE DISPENSER OUTLET 6 ICE DISPENSER ACTUATOR 7 WATER DRIP TRAY WITH COVER 8 COLD WATER DISPENSER OUTLET 9 FAN VENT 10 WATER RESERVOIR A
5. Damages due to power surges are not considered a manufacturer covered defect and will void your product warranty IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire electrical shock or AWARNINGY injury when using your ice maker follow these basic precautions e Read all instructions before using the ice maker e Danger or Warning risk of child entrapment e Child entrapment and suffocation are not problems of the past Junked or abandoned appliances are still dangerous Even if they will just sit in the garage a few days e Never allow children to operate play with or crawl inside the appliance e Never clean ice maker parts with flammable fluids The fumes can create a fire hazard or explosion e Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other ice maker The fumes can create a fire hazard or explosion Save These Instructions INSTALLATION INSTRUCTIONS Before Using Your Ice Maker Remove the exterior and interior packing Check to be sure you have all of the following parts e 1 Instruction Manual e 1 Drip Tray Assembly e 1 Water Cup e 1 Plastic Ice Scoop Before connecting the ice maker to the power source let it stand upright for approximately 2 hours This will reduce the possibility of a malfunction in the cooling system from handling during transportation Clean the interior surface with lukewarm water using a soft cloth
6. These fumes can create a fire hazard or explosion And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance The fumes can create a fire hazard or explosion Before proceeding with cleaning and maintenance operations make sure the power line of the unit is disconnected Do not connect or disconnect the electric plug when your hands are wet Unplug the appliance or disconnect power before cleaning or servicing Failure to do so can result in electrical shock or death Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this manual All other servicing should be referred to a qualified technician WARNING 4h FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL Use two or more people to move and install appliance Failure to do so can result in back or other injury To ensure proper ventilation for your appliance the front of the unit must be completely unobstructed Choose a well ventilated area with temperatures above 60 F 1 6c and below 90 f 32 c This unit must be installed in an area protected from the element such as wind rain water spray or drips The appliance should not be located next to ovens grills or other sources of high heat The appliance must be installed with all electrical water and drain connections in accordance with state and local codes A standard electrical supply 115 v ac only 60 hz
7. bin will begin to slowly melt and the water will re deposit into the water tray e If you are not going to consume the ice cubes as they are made do not fill the water tray to the full line while the ice bin is full e When the red ICE FULL indicator is on remove the cubes and store in a separate suitable container e If you plan to leave the unit running overnight it is recommended that you remove any cubes left in the bin and store in a separate container e If at any time the ICE FULL and ADD WATER indicators are on and flashing at the same time push the POWER button remove all the ice from the drawer check and fill water when needed wait for 3 minutes and then push Power button to start the ice making again This unit is not designed to store the ice cubes produced for long periods of time 12 Service For Your Ice Maker We are proud of our customer service organization and the network of professional service technicians that provide service on your Avanti ice maker With the purchase of your Avanti ice maker you can be confident that if you ever need additional information or assistance the Avanti Products Customer Service team will be here for you Just call us toll free Avanti Products Customer Services Product information Whatever your questions are about our products 800 323 5029 help is available Part orders You may order parts and accessories that will be 800 220 5570 delivered directl
8. de hacer hielo Agrega agua al dep sito hasta la linea marcada MAX Este icono significa el estado del ciclo de hacer hielo Cuando el icono est moviendo significa que el sistema esta en un ciclo de hacer hielo Cuando el icono est s lido significa que el sistema se ha terminado el ciclo de hacer hielo Este icono significa que la maquina para hacer hielo esta dispensando hielo La bandeja de hielo est llena el icono aparecer hasta que el nivel de hielo se baja por dispensar o el hielo se derrite Bot n Operaci n Oprima para seleccionar cubos de hielo peque o SMALL Oprima para seleccionar cubos de hielo grande LARGE l l Oprima para dispensar agua WATER S Oprima para encender o apagar la unidad ON OFF Selecci n de tamano de cubo de hielo El tama o de cubo de hielo seleccionado se quedar fijo hasta que se oprima un bot n cambiando el tama o o haya una perdida de Fuente de luz Para la mejor y m s eficiente operaci n selecciona el tama o peque o cuando la temperatura ambiental baja de 15 C 59 F 17 Antes de hacer hielo Enchufe la unidad al tomacorriente Oprima el bot n marcado ON OFF para encender la unidad Abra la puerta del dep sito de agua localizada en la parte derecha de la unidad Remueva cualquier objeto que est en el dep sito de agua Llene el dep sito de agua hasta la linea marcada MAX Oprima el bot n marcado
9. los cubos de hielo Use una soluci n diluida de agua y vinagre para limpiar el interior y el exterior de la superficie de la m quina para dispensar hielo No roc e la m quina para dispensar hielo con substancias qu micas o agentes diluidos tales como cidos gasolina o aceite Enjuague bien antes de empezar el funcionamiento Requerimientos de espacio El ngulo de inclinaci n de la unidad durante el transporte no debe exceder los 45 grados No ponga la m quina para dispensar hielo de cabeza ya que esto puede producir problemas en el compresor y el sistema sellado La m quina para dispensar hielo debe ser colocada sobre una superficie correctamente nivelada Para asegurar ventilaci n apropiada para su m quina para dispensar hielo deje 6 de espacio encima de la superficie la parte posterior y los lados Antes de usar la m quina para dispensar hielo por primera vez por favor espere 2 horas despu s de colocarla en su posici n final Limpie la superficie interna el contenedor del hielo el tanque de agua y el recipiente para rellenar el tanque de agua con mucha frecuencia IMPORTANTE No instale la m quina para dispensar hielo cerca a un horno radiador ni otra fuente de calor gt Falta de electricidad Cuando la electricidad se va la mayor a de las veces esta regresa en unas pocas horas y no debe afectar la temperatura de su m quina para dispensar hielo siempre y cuando ud minimice las veces que se abra la puerta d
10. the date of purchase by the original owner Avanti products will at its option repair or replace any part of the product which proves to be defective in material or workmanship under normal use Avanti Products will provide you with a reasonably similar product that is either new or factory refurbished During this period Avanti Products will provide all parts and labor necessary to correct such defects free of charge so long as the product has been installed and operated in accordance with the written instructions in this manual In rental or commercial use the warranty period is 90 days All Avanti appliances of 4 2 cubic feet capacity or less must be brought sent to the appliance service center for repair LIMITED SECOND THROUGH FIFTH YEAR WARRANTY For the second through the fifth year from the date of original purchase Avanti Products will provide a replacement compressor free of charge due to a failure You are responsible for the service labor and freight charges In rental or commercial use the limited compressor warranty is one year and nine months Costs involved to move the product to the service center and back to the user s home as maybe required are the user s responsibility WARRANTY EXCLUSIONS WHAT IS NOT COVERED The warranty coverage described herein excludes all defects or damage that are not the direct fault of Avanti Products including without limitation one or more of the following e A failure to com
11. CCESS DOOR 11 SIDE PANEL 12 TOP PANEL 13 BACK PANEL 14 POWER CORD 15 DRAIN HOLE WITH CAP gt Electrical connection MN WARNING Y IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL SHOCK IF THE POWER CORD IS DAMAGED HAVE IT REPLACED BY AN AUTHORIZED AVANTI PRODUCTS SERVICE CENTER This appliance should be properly grounded for your safety The power cord of this appliance is equipped with a three prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock Do not under any circumstances cut or remove the third ground prong from the power cord supplied For personal safety this appliance must be properly grounded This appliance requires a standard 115 120 Volt AC 60Hz electrical ground outlet with three prong Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded When a standard 2 prong wall outlet is encountered it is your responsibility and obligation to have it replaced with a properly grounded 3 prong wall outlet The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance This provides the best performance and also prevent overloading house wiring circuits that could cause a fir
12. Como dispensar hielo e Coloca el vaso abajo del dispensador y oprima el actuador de dispensar e Despu s de dispensar la cantidad de hielo deseada retire el vaso e Nunca retire el vaso del dispensador hasta que la maquina termine completamente de dispensar el hielo o agua Dispensing Cold Water e Coloca el vaso abajo del dispensador y oprima el bot n marcado WATER e Despu s de dispensar la cantidad de agua deseado retire el vaso e Nunca retire el vaso del dispensador hasta que la maquina termine completamente de dispensar el hielo o agua 18 CUIDADO Y MANTENIMIENTO Precaucion Asegurese de desconectar la maquina para dispensar hielo de la electricidad antes de limpiarla de lo contrario puede ocasionar un choque el ctrico o da o personal gt Limpiando su m quina para dispensar hielo Para asegurar la higiene en los cubos de hielo el agua del tanque debe ser reemplazada cada 24 horas Cuando la m quina para dispensar hielo no sea usada por un per odo de tiempo largo retire el tap n del drenaje para que el agua remanente del tanque sea descartada Coloque el tap n del drenaje nuevamente en su sitio despu s que toda el agua haya sido drenada Siempre use agua fresca antes de empezar la producci n de hielo durante la instalaci n inicial o despu s de largos per odos de inactividad Por favor limpie su m quina para dispensar hielo regularmente Cuando la limpie desconecte la unidad de la electricidad y retire
13. LLEVELO A UN CENTRO DE SERVICIO AUTORIZADO POR AVANTI PRODUCTS PARA QUE SE REEMPLACE e Para su seguridad esta m quina para dispensar hielo debe estar apropiadamente conectada a tierra El cord n el ctrico de esta m quina para dispensar hielo est equipado con un enchufe de tres puntas el cual encaja perfectamente en los recept culos enchufes de pared de tres puntas est ndar para minimizar la posibilidad de un choque el ctrico e Bajo ninguna circunstancia corte o retire la tercera punta cable a tierra del enchufe del cord n el ctrico e Nunca use un cable de extensi n para conectar la unidad a la electricidad e Nunca use un adaptado con enchufe de solo 2 puntas e Si solo puede conectar la m quina para dispensar hielo a un recept culo enchufe de pared de 2 puntas comun quese con un electricista calificado para que reemplace ese recept culo enchufe de pared por uno de 3 puntas de acuerdo con los c digos de electricidad aplicables e Esta m quina para dispensar hielo requiere un receptaculo enchufe de pared de tres puntas est ndar de 115 120 voltios a c 60hz e Para prevenir cualquier da o f sico o lesi n el cord n debe ser asegurado detr s de la m quina para dispensar hielo y no estar expuesto o colgando gt Cable de Extensi n Debido al posible riesgo de seguridad causado bajo ciertas circunstancias se recomienda firmemente que no use un cable de extensi n para este electrodom stico Sin embargo si no
14. WATER y dispense aproximadamente un vaso de agua Abra el desag e localizado en el lado posterior de la unidad para vaciar el resto del agua en el dep sito e Cierre el tap n del desag e e Abra la puerta del dep sito de agua y llena con agua hasta la l nea marcada MAX e Cierre la puerta del dep sito de agua y oprime el bot n ON OFF para apagar la unidad AVISO Nunca llene el dep sito de agua pasada la l nea MAX esto causara que el agua se desborde y gotee encima de los componentes electr nicos AVISO Nunca llene el dep sito de agua con otro l quido que no sea agua Esto causara da os al sistema e invalida su garant a add water by manual Como hacer hielo e Oprime el bot n ON OFF para encender la unidad e Oprime el bot n marcado Small o Large para seleccionar el tama o del cubo de hielo para empezar el ciclo de hacer hielo e El sistema medir autom ticamente el nivel de agua en el dep sito peri dicamente El sistema avisar cuando el nivel de agua este menos de lo necesario para hacer hielo y apagara el ciclo En el caso de que tenga que agregar agua llene el dep sito y oprima el bot n ON OFF parar apagar la unidad Oprima el bot n ON OFF para encender la unidad de nuevo y selecciona el tama o de cubo para empezar el ciclo de hacer hielo e Cuando la bandeja de hielo est llena la unidad se parara de hacer hielo hasta que se dispensa hielo o el hielo se derrite
15. automatically When the ice cubes are collected and reach the bin full sensor the ice maker will stop operating and the ICE FULL indicator will be illuminated There are two sizes of ice cubes available therefore the larger the ice cube selected the longer the time it will take to complete the cycle When the ambient temperature is lower than 15 C 59 F the small or medium ice cubes sizes are recommended to avoid ice cubes clumping together Dispensing ice Place the glass or cup directly below the dispenser and press gently against the dispenser actuator Remove the amount of ice as desired by continuously pressing against the dispenser actuator Once the desired amount of ice has been dispensed release the dispenser actuator and the machine will stop dispensing ice Never remove the cup from below the dispensing outlet before the ice or water are finished dispensing 10 Dispensing Cold Water Place the glass or cup directly below the dispenser and press gently against the button marked WATER Remove the amount of water as desired by continuously pressing against the button marked water Once the desired amount of water has been dispensed release the button and the machine will stop dispensing water Never remove the cup from below the dispensing outlet before the ice or water are finished dispensing NOTE Water will be cold after a few ice making cycles CARE AND MAINTENANCE Caution Failure to unplug the ice maker
16. could result in electrical shock or personal injury gt Cleaning Your Ice Maker To ensure the cleanliness of the ice cubes water in the reservoir should be replaced every 24 hours Remove the drain plug to drain remaining water from the water reservoir when the ice maker will not be used for long period of time Screw the drain plug back in place after the water has been drained Always change with fresh water before starting ice production at initial installation or after long shut off periods Please clean your Ice maker regularly When cleaning unplug the unit and remove the ice cubes Use a diluted solution of water and vinegar to clean the inside and the outside surface of the Ice maker Do not spray Ice maker with chemicals or diluted agents such as acids gasoline or oil Rinse thoroughly before starting Space Requirements During transportation the incline angle of the cabinet should not be over 45 Do not turn the Ice maker upside down Problems could occur in the compressor and sealed system The Ice maker should be placed horizontally on a properly leveled surface To ensure proper ventilation for your Ice maker allow 6 of space at the top the back and on each side Before using the Ice maker for the first time please wait 2 hours after positioning it Clean the inner liner ice bin water box water cup frequently IMPORTANT Do not install the Ice maker near an oven radiator or other heat source gt Powe
17. de ni os atrapados e Los ni os atrapados o sofocados no so un problema del pasado Electrodom sticos abandonados aun son peligrosos aun cuando solo estar n en el garaje un par de d as e Antes de botar su m quina para dispensar hielo Retire la bandeja de hielo e Nunca permita que los ni os operen jueguen con o se introduzcan en la maquina e Nunca limpie la m quina para dispensar hielo o las piezas con l quidos inflamables Los vapores pueden causar peligro de fuego o explosi n e No guarde ni use gasolina u otros vapores o l quidos inflamables cerca a este u otra m quina para dispensar hielo Los vapores pueden causar peligro de fuego o explosi n guarde estas instrucciones INSTRUCCIONES DE INSTALACION Antes de usar su M quina para dispensar Hielo Retire el empaque interno y externo Verifique que haya recibido las siguientes piezas e 1 Manual de instrucciones e 1 Bandeja contra goteras e 1 Vaso para llenar el tanque de agua e 1 Esp tula pl stica Antes de conectar su electrodom stico a la corriente el ctrica ubiquelo en posici n vertical sobre una superficie plana por lo menos por 2 horas Esto reducir la posibilidad de malfuncionamiento en el sistema de enfriamiento por el manipuleo durante el transporte Limpie la superficie interior con agua tibia usando un trapo suave Instalaci n de su electrodom stico Ubique su electrodom stico en un piso que sea lo suficientemente fuerte para
18. e hazard from overheated Never unplug the appliance by pulling the power cord Always grip the plug firmly and pull straight out from the receptacle Repair or replace immediately all power cords that have become frayed or otherwise damaged Do not use a cord that shows cracks or abrasion damage along its length or at either end When moving the appliance be careful not to damage the power cord gt EXTENSION CORD Because of potential safety hazards under certain conditions it is strongly recommended that you do not use an extension cord with this appliance However if you must use an extension cord it is absolutely necessary that it be a UL CUL Listed 3 wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes gt SURGE PROTECTOR Most electrical appliances use a series of electric control boards to operate These boards are very susceptible to power surges and could be damaged or destroyed If the appliance is going to be used in an area or if your city country is prone to power surges outages it is suggested that you use a power surge protector for all electrical devices appliances you use The surge protector that you select must have a surge block high enough to protect the appliance it is connected to If you have any questions regarding the type and size of surge protector needed contact a licensed electrician in your area
19. el contenedor del hielo Si la electricidad va a estar desconectada por un largo per odo de tiempo entonces debe tomar los pasos apropiados y desconectar la unidad 19 PROBLEMAS CON SU M QUINA PARA DISPENSAR HIELO Ud puede resolver muchos problemas simples de m quina para dispensar hielo f cilmente ahorr ndose el costo de una visita del servicio t cnico Pruebe las sugerencias a continuaci n para ver si con ellas puede resolver el problema antes de llamar al t cnico GUIA PARA RESOLVER PROBLEMAS Problema Causa Posible Sugerencias El compresor no funciona normalmente tiene un sonido El voltaje es menor que el recomendado Apague la m quina para dispensar hielo y no la encienda hasta que el voltaje vuelva a la normalidad El indicador para a adir mas agua est encendido El tanque de agua no est suficientemente lleno Presione el bot n POWER llene de agua el tanque espere 3 minutos y luego encienda la unidad presionando el bot n POWER Las luces indicadoras est n apagadas Los cubos de hielo son muy grandes y se est n pegando unos a otros Se vol un fusible la m quina no esta conectada o no hay La temperatura del agua en el contenedor de hielo o del ambiente es muy baja Reemplace el fusible verifique que la m quina esta enchufada electricidad vol el interruptor encienda la m quina Apague la m quina y reprograme el ciclo de dispensar hielo L
20. ert symbol This symbol alerts you to Potential hazards that can kill or injure you and others All safety messages will follow the safety alert symbol And either the words DANGER WARNING or CAUTION A DA N G E R A Danger means that failure to heed this safety statement may result in severe personal injury or death A WAR N N G T Warning means that failure to heed this safety statement may result in extensive product damage serious personal injury or death CAU T O N Caution means that failure to heed this safety statement may result in minor or moderate personal injury property or equipment damage All safety messages will alert you to know what potential hazard is tell you how to reduce the chance of injury and let you know what can happen if the instructions are not followed IMPORTANT SAFEGUIDES Before the appliance is used it must be properly positioned and installed as described in this manual so read the manual carefully To reduce the risk of fire electrical shock or injury when using the appliance follow basic precaution Including the following DANGER A Plug into a grounded 3 prong outlet do not remove grounding prong do not use an adapter and do not use an extension cord It is recommended that a separate circuit serving only your appliance be provided Use receptacles that cannot be turned off by a switch or pull chain Never clean appliance parts with flammable fluids
21. means the unit is currently in the ice making cycle When the fan is stopped this mean the unit is not currently making ice If there is an S at the top right corner of the fan symbol this means the small sized ice cubes has been selected If there is an L at the bottom right corner of the fan symbol this means the large sized ice cubes has been selected DISPENSING ICE The unit will show this icon while dispensing ice ICE BIN IS FULL After you dispensed or removed the ice unit will restart automatically Button Operation Press this button to select the small sized ice cubes SMALL This is the DEFAULT setting Press this button to select the large sized ice cubes LARGE Press this button to dispense cold water WATER D Press this button to turn the unit ON OFF or to reset the ice making cycle ON OFF Ice Size Selector The size selection will stay as selected unless changed or there is a power failure For the most efficient operation when ambient temperature is below 15 C 59 F use the small cube size setting Starting your Ice maker Plug in the appliance to an appropriate power supply Press the ON OFF button to turn the unit on Open the reservoir cover door located on the right side panel Remove any dust or foreign objects that may be in the water reservoir Using the water cup included with your unit fill the water tank up to the area marked MAX
22. nd other structures and or objects around the product Also excluded from this warranty are scratches nicks minor dents and other cosmetic damages on external surfaces and exposed parts Products on which the serial numbers have been altered defaced or removed service visits for customer education or visits where there is nothing wrong with the product correction of installation problems you are solely responsible for any structure and setting for the product including all electrical plumbing and or other connecting facilities for proper foundation flooring and for any alterations including without limitation cabinetry walls floors shelving etc as well as the resetting of breakers or fuses OUT OF WARRANTY PRODUCT Avanti Products is under no obligation at law or otherwise to provide you with any concessions including repairs pro rates or product replacement once this warranty has expired e Light bulbs and or plastic housing e Plastic cabinet liners e Punctured evaporator that voids the warranty on the complete sealed system WARRANTY REFRIGERATION COMPRESSOR 14 MEDIDAS DE PRECAUCION IMPORTANTES Para reducir el riesgo de un incendio choque X ADVERTENCIAY el ctrico o da os personales cuando use la m quina para dispensar hielo siga estas recauciones b sicas e Lea todas las instrucciones antes de usar la m quina para dispensar hielo e Peligro o Advertencia riesgo
23. one Your Age Reason for Choosing This Avanti Product under 18 18 25 U 26 30 Please indicate the most important factors 31 35 36 50 over 50 That influenced your decision to purchase this Marital Status product Married Single O Price O Product Features Is This Product Used In The O Avanti Reputation Home Business O Product Quality O Salesperson Recommendation How Did You Learn About This Product O Other Advertising O Friend Relative Recommendation In Store Demo O Warranty Personal Demo O Other Comments 23 WIMD332PC IS 03262014 PRINTED IN CHINA 24
24. ply with any applicable state local city or county electrical plumbing and or building codes regulations or laws including failure to install the product in strict conformity with local fire and building codes and regulations e Any external elemental and or environmental forces and factors including without limitation rain wind sand floods fires mud slides freezing temperatures excessive moisture or extended exposure to humidity lightning power surges structural failures surrounding the appliance and acts of God e Content losses of food or other content due to e Shipping and handling costs associated with the spoilage replacement of the unit e Incidental or consequential damages e Repairs performed by unauthorized servicers e Parts and labor costs for the following will not be e Service calls that are related to external problems considered as warranty such as abuse misuse inadequate electrical power accidents fire floods or any other acts of God e Failure of the product if it is used for other than it intended purpose e The warranty does not apply outside the Continental USA e Surcharges including but not limited to any after hour weekend or holiday service calls tolls ferry trip charges or mileage expense for service calls to remote areas In no event shall Avanti Products have any liability or responsibility whatsoever for damage to surrounding property including cabinetry floors ceilings a
25. properly grounded in accordance with the national electrical code and local codes and ordinances is required Do not kink or pinch the power supply cord of appliance The fuse or circuit breaker size should be 15 amperes It is important for the appliance to be leveled in order to work properly You may need to make several adjustments to level it All installation must be in accordance with local plumbing code requirements Make certain that the pipes are not pinched or kinked or damaged during installations Check for leaks after connection Never allow children to operate play with or crawl inside the appliance If you use the drainage container you must set the drain select switch to off or the water can overflow from the drainage container Although the unit has been tested at the factory due to long term transit and storage the first batch of cubes must be discarded Do not use solvent based cleaning agents of abrasives on the interior These cleaners may damage or discolor the interior Do not use this apparatus for other than its intended purpose Help us help you Read this guide carefully It is intended to help you operate and maintain your new ice maker properly Keep it handy to answer your questions If you don t understand something or you need more help please call Avanti customer service 800 220 5570 Keep proof of original purchase date such as your sales slip with this guide to establish the warranty period
26. r Failure Most power failures are corrected within a few hours and should not affect the temperature of your ice maker if you minimize the number of times the ice bin is opened If the power is going to be OFF for a longer period of time you need to take the proper steps to disconnect your appliance 11 PROBLEMS WITH YOUR ICE MAKER You can solve many common ice maker problems easily saving you the cost of a possible service call Try the suggestions below to see if you can solve the problem before calling the servicer TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE RESOLVING Unit does not start 1 Not plugged in 2 The circuit breaker tripped or a blown fuse 3 The unit is at OFF position 1 Plug unit in 2 Call for service 3 Push the ON OFF button to switch unit on Compressor and fan motor work but 1 Air blocked the water system 1 Open the drain hose to release some water and then push the ON OFF no ice made button 2 Cooling system leakage 2 Call for service 3 Water shortage 3 Add water Ice can t be 1 Ice melt together because long time 1 Take out the ice cubes from ice dispensed even there is ice inside ice reservoir re servoir ATTENTION ICE MAKER USAGE For best results and most efficient operation of your ice maker it is recommended that you consume the ice as it is made or store the cubes in a separate container Ice cubes left in the ice
27. soportar su peso cuando est totalmente lleno o cargado Para nivelar el electrodom stico ajuste las patas delanteras Deje aproximadamente 5 pulgadas de espacio entre la parte trasera y los costados de su electrodom stico as permitir la circulaci n de aire necesaria para enfriar el compresor Mantenga su electrodom stico alejado del aire caliente vapor o l quidos que puedan salpicarlo ya que la unidad podr a averiarse Los rayos solares directos pueden malograr la capa acr lica y las fuentes de calor pueden ocasionar un aumento en el consumo el ctrico Mant ngalo lo m s alejado posible del agua para prevenir alg n choque el ctrico Evite los sitios h medos y los ambientes extremadamente fr os ya que esto puede afectar la eficiencia del enfriamiento de su electrodom stico Evite ubicar su electrodom stico en reas mojadas o muy h medas Conecte el electrodom stico a un enchufe de pared exclusivo con conexi n a tierra Bajo ninguna raz n se debe retirar la tercera punta del enchufe Cualquier consulta con respecto a la energ a y o cable de tierra debe ser dirigida a un electricista certificado o autorizado por el Servicio T cnico de Avanti Products IMPORTANTE No instale la M quina para dispensar hielo cerca a un horno radiador u otras fuentes de calor 15 gt Conexion Electrica X ADVERTENCIA Y EL USO INAPROPIADO DEL ENCHUFE A TIERRA PUEDE OCASIONAR RIESGO DE UN CHOQUE ELECTRICO SI EL CORDON SE DA ASE
28. tiene otra opci n mas que usar un cable de extensi n aseg rese que este sea un cable de extensi n para electrodom sticos que este listado bajo UL CUL que tenga enchufe y recept culo para enchufe de tres puntas cable a tierra y que la capacidad del cord n el ctrico sea de 115 voltios y no menos de 10 amperios gt Protector contra variaciones de corriente el ctrica Surge Protector La mayor a de electrodom sticos utilizan una series de paneles de control para operar Estos paneles son muy susceptibles a las variaciones de corriente el ctrica las cuales causan que estos se da en o destruyen Si vive en un rea o ciudad done hay muchas variaciones de corriente o apagones se recomienda que utilice un protector contra variaciones de corriente para todos los electrodom sticos y aparatos el ctricos El protector que elija debe bloquear una variaci n de electricidad alta para poder proteger el electrodom stico al cual est conectado Por favor cont ctese con un electricista licenciado en su rea si tuviera preguntas en referencia al tipo y tama o de protector que necesita Da os debido a variaciones de electricidad no se consideran un defecto del fabricante y podr an anular la garant a 16 OPERANDO SU M QUINA PARA DISPENSAR HIELO gt PANEL DE CONTROLES C_D ON OFF A LARGE WATER DESCRIPCION El nivel del agua en el dep sito de agua no es suficiente para hacer un ciclo
29. uego de apagar la m quina enci ndala otra vez Todas la condiciones para el ciclo de dispensar hielo est n correctas pero no hay hielo Fuga o goteo de refrigerante el sistema sellado esta bloqueado Reemplace la unidad Los indicadores de Alerta y de Contenedor de Hielo Lleno est n encendidos El tanque de agua no gira Verifique si hay cubos de hielo bloqueados 20 21 22 Registration Information Thank you for purchasing this fine Avanti product Please fill out this form and return it to the following address within 100 days from the date of purchase and receive these important benefits AVANTI PRODUCTS LLC P O Box 520604 Miami Florida 33152 gt Protect your product We will keep the model number and date of purchase of your new Avanti product on file to help you refer to this information in the event of an insurance claim such as fire or theft gt Promote better products We value your input Your responses will help us develop products designed to best meet your future needs Avanti Registration Card Name Model Serial Address Date Purchased Store Dealer Name City State Zip E mail Address Area Code Phone Number Occupation Did You Purchase An Additional Warranty As your Primary Residence Do You O Extended Own Rent O N
30. y to your home by personal check money order master card or visa In home repair service An Avanti Products authorized service center will 800 220 5570 provide expert repair service scheduled at a time that is convenient for you Our trained servicers know your ice maker inside and out WIRING DIAGRAM POWER 110AC 12 DC ON OFF ICE DISPENSING N MOTOR lan U manene fo ma LT Remy VALVE 13 YOUR AVANTI PRODUCTS Staple your sales receipt here Proof of original purchase date is needed to obtain service under WARRANTY warranty WHAT IS COVERED LIMITED ONE YEAR WARRANTY Avanti Products warrants that the product is free from defects in materials and or workmanship for a period of twelve 12 months from the date of purchase by the original owner The foregoing timeline begins to run upon the date of purchase and shall not be stalled tolled extended or suspended for any reason whatsoever unless described in detail in the warranty document For one year from

Download Pdf Manuals

image

Related Search

Related Contents

ProphyMax - ProphyMax Lux - Support-acteon  Electrolux 67160 KF-N Cooktop User Manual  Descargar este archivo  Manual Cover Pages  700039A - GC1280 User Manual  Samsung LW15E33C User Manual  UBCT9 Scanner  Samsung 선풍기  肺運動負荷モニタリングシステム 仕 様 書 公立大学法人和歌山県立医科  here  

Copyright © All rights reserved.
Failed to retrieve file